Re: Prof_Revolution_DVB-S2_8000_PCI-E Linux Kernel 2.6.38-rc8-next-20110314
Em 20-03-2011 16:32, Wojciech Myrda escreveu: It turns ot that revised patch not only applies cleanly but compiles as well agaist Linux Kernel 2.6.38-rc8-next-20110321. Looking at dmesg everything is recognized properly as well. Do you guys think if it is possible to include it into the tree? Please post the patch again, with a few fixes (see bellow), and add your Signed-off-by: (please read how to submit patches section at linuxtv.org wiki for more details). diff -r 1da5fed5c8b2 linux/drivers/media/video/cx23885/cx23885-cards.c --- a/linux/drivers/media/video/cx23885/cx23885-cards.c Sun Sep 19 02:23:09 2010 -0300 +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c Sat Oct 02 11:19:50 2010 +0300 /linux? Are you using the old -hg tree? Please don't do that. The mercurial tree is not touched for the last 8 months! Please use, instead the media_tree.git (media_build.git allows you to compile/test a driver against the media_tree.git tree). @@ -169,6 +169,10 @@ .name = TurboSight TBS 6920, .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_PROF_8000] = { + .name = Prof Revolution DVB-S2 8000, + .portb = CX23885_MPEG_DVB, + }, [CX23885_BOARD_TEVII_S470] = { .name = TeVii S470, .portb = CX23885_MPEG_DVB, @@ -388,6 +392,10 @@ .subdevice = 0x, .card = CX23885_BOARD_TBS_6920, }, { + .subvendor = 0x8000, + .subdevice = 0x3034, + .card = CX23885_BOARD_PROF_8000, + }, { .subvendor = 0xd470, .subdevice = 0x9022, .card = CX23885_BOARD_TEVII_S470, @@ -813,6 +821,7 @@ mdelay(20); cx_set(GP0_IO, 0x00040004); break; + case CX23885_BOARD_PROF_8000: case CX23885_BOARD_TBS_6920: cx_write(MC417_CTL, 0x0036); cx_write(MC417_OEN, 0x1000); @@ -1043,6 +1052,7 @@ ts1-ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1-src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_PROF_8000: case CX23885_BOARD_TEVII_S470: case CX23885_BOARD_DVBWORLD_2005: ts1-gen_ctrl_val = 0x5; /* Parallel */ --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c.old 2011-03-20 08:20:37.384001338 +0100 +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c 2011-03-20 08:29:56.757001476 +0100 @@ -47,6 +47,9 @@ #include dibx000_common.h #include zl10353.h #include stv0900.h +#include stb6100.h +#include stb6100_proc.h +#include stv0900.h If you're adding more dependencies here, you'll need to touch also drivers/media/video/cx23885/Kconfig in order to select the right frontends. #include stv0900_reg.h #include stv6110.h #include lnbh24.h @@ -478,6 +478,35 @@ .if_khz = 5380, }; +static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe-dvb-priv; + struct cx23885_dev *dev = port-dev; + + if (voltage == SEC_VOLTAGE_18) + cx_write(MC417_RWD, 0x1e00); + else if (voltage == SEC_VOLTAGE_13) + cx_write(MC417_RWD, 0x1a00); + else + cx_write(MC417_RWD, 0x1800); + return 0; +} + +static struct stv0900_config prof_8000_stv0900_config = { + .demod_address = 0x6a, + .xtal = 2700, + .clkmode = 3, + .diseqc_mode = 2, + .tun1_maddress = 0, + .tun1_adc = 0, + .path1_mode = 3, +}; + +static struct stb6100_config prof_8000_stb6100_config = { + .tuner_address = 0x60, + .refclock = 2700, +}; + static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *param) { @@ -1094,6 +1123,29 @@ goto frontend_detach; } break; + case CX23885_BOARD_PROF_8000: { + struct dvb_tuner_ops *tuner_ops = NULL; + + i2c_bus = dev-i2c_bus[0]; + fe0-dvb.frontend = dvb_attach(stv0900_attach, + prof_8000_stv0900_config, + i2c_bus-i2c_adap, 0); + if (fe0-dvb.frontend != NULL) { + if (dvb_attach(stb6100_attach, fe0-dvb.frontend, + prof_8000_stb6100_config, + i2c_bus-i2c_adap)) { + tuner_ops = fe0-dvb.frontend-ops.tuner_ops; + tuner_ops-set_frequency = stb6100_set_freq; + tuner_ops-get_frequency = stb6100_get_freq; + tuner_ops-set_bandwidth =
Re: Prof_Revolution_DVB-S2_8000_PCI-E Linux Kernel 2.6.38-rc8-next-20110314
W dniu 20.03.2011 20:32, Wojciech Myrda pisze: Hi all, I have purchased Prof_Revolution_DVB-S2_8000_PCI-E which is listed on the wiki http://linuxtv.org/wiki/index.php/Prof_Revolution_DVB-S2_8000_PCI-E as not yet suppoorted, however I found out there is some work ongoing on the driver for that card as the producer make the folowing patch http://www.proftuners.com/sites/default/files/prof8000_0.patch available on their website http://www.prof-tuners.pl/download8000.html This patch would not apply agaist the recent Linux Kernel 2.6.38-rc8-next-20110314 so I did a few quick fixes that moved few lines (patch in the attachment). Now that it all applies like it should it fails with the following error CC [M] kernel/configs.o CC [M] drivers/media/video/cx23885/cx23885-cards.o CC [M] drivers/media/video/cx23885/cx23885-video.o CC [M] drivers/media/video/cx23885/cx23885-vbi.o CC [M] drivers/media/video/cx23885/cx23885-core.o drivers/media/video/cx23885/altera-ci.h:71:12: warning: ‘altera_ci_tuner_reset’ defined but not used [-Wunused-function] CC [M] drivers/media/video/cx23885/cx23885-i2c.o CC [M] drivers/media/video/cx23885/cx23885-dvb.o drivers/media/video/cx23885/cx23885-dvb.c:505:15: error: variable ‘prof_8000_stb6100_config’ has initializer but incomplete type drivers/media/video/cx23885/cx23885-dvb.c:506:2: error: unknown field ‘tuner_address’ specified in initializer drivers/media/video/cx23885/cx23885-dvb.c:506:2: warning: excess elements in struct initializer [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c:506:2: warning: (near initialization for ‘prof_8000_stb6100_config’) [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c:507:2: error: unknown field ‘refclock’ specified in initializer drivers/media/video/cx23885/cx23885-dvb.c:507:2: warning: excess elements in struct initializer [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c:507:2: warning: (near initialization for ‘prof_8000_stb6100_config’) [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c: In function ‘dvb_register’: drivers/media/video/cx23885/cx23885-dvb.c:1134:8: error: ‘stb6100_attach’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1134:8: note: each undeclared identifier is reported only once for each function it appears in drivers/media/video/cx23885/cx23885-dvb.c:1134:8: error: called object ‘__a’ is not a function drivers/media/video/cx23885/cx23885-dvb.c:1138:32: error: ‘stb6100_set_freq’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1139:32: error: ‘stb6100_get_freq’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1140:32: error: ‘stb6100_set_bandw’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1141:32: error: ‘stb6100_get_bandw’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c: At top level: drivers/media/video/cx23885/altera-ci.h:71:12: warning: ‘altera_ci_tuner_reset’ defined but not used [-Wunused-function] make[4]: *** [drivers/media/video/cx23885/cx23885-dvb.o] Error 1 make[3]: *** [drivers/media/video/cx23885] Error 2 make[2]: *** [drivers/media/video] Error 2 make[1]: *** [drivers/media] Error 2 make: *** [drivers] Error 2 Please help in making it work as my Kung Fu ends here Regards, Wojciech It turns ot that revised patch not only applies cleanly but compiles as well agaist Linux Kernel 2.6.38-rc8-next-20110321. Looking at dmesg everything is recognized properly as well. Do you guys think if it is possible to include it into the tree? mediapc linux-2.6.38 # cat ../dvb/prof8000_1.patch |patch -E -p2 (Stripping trailing CRs from patch.) patching file drivers/media/video/cx23885/cx23885-cards.c Hunk #1 succeeded at 183 (offset 14 lines). Hunk #2 succeeded at 445 (offset 53 lines). Hunk #3 succeeded at 932 (offset 111 lines). Hunk #4 succeeded at 1297 (offset 245 lines). (Stripping trailing CRs from patch.) patching file drivers/media/video/cx23885/cx23885-dvb.c Hunk #1 succeeded at 46 (offset -1 lines). (Stripping trailing CRs from patch.) patching file drivers/media/video/cx23885/cx23885.h mediapc linux-2.6.38 # make CHK include/linux/version.h CHK include/generated/utsrelease.h CALLscripts/checksyscalls.sh CHK include/generated/compile.h CC [M] drivers/media/video/cx23885/cx23885-cards.o CC [M] drivers/media/video/cx23885/cx23885-video.o CC [M] drivers/media/video/cx23885/cx23885-vbi.o CC [M] drivers/media/video/cx23885/cx23885-core.o drivers/media/video/cx23885/altera-ci.h:71:12: warning: ‘altera_ci_tuner_reset’ defined but not used [-Wunused-function] CC [M] drivers/media/video/cx23885/cx23885-i2c.o CC [M] drivers/media/video/cx23885/cx23885-dvb.o drivers/media/video/cx23885/altera-ci.h:71:12: warning: ‘altera_ci_tuner_reset’ defined but not used [-Wunused-function]
Prof_Revolution_DVB-S2_8000_PCI-E Linux Kernel 2.6.38-rc8-next-20110314
Hi all, I have purchased Prof_Revolution_DVB-S2_8000_PCI-E which is listed on the wiki http://linuxtv.org/wiki/index.php/Prof_Revolution_DVB-S2_8000_PCI-E as not yet suppoorted, however I found out there is some work ongoing on the driver for that card as the producer make the folowing patch http://www.proftuners.com/sites/default/files/prof8000_0.patch available on their website http://www.prof-tuners.pl/download8000.html This patch would not apply agaist the recent Linux Kernel 2.6.38-rc8-next-20110314 so I did a few quick fixes that moved few lines (patch in the attachment). Now that it all applies like it should it fails with the following error CC [M] kernel/configs.o CC [M] drivers/media/video/cx23885/cx23885-cards.o CC [M] drivers/media/video/cx23885/cx23885-video.o CC [M] drivers/media/video/cx23885/cx23885-vbi.o CC [M] drivers/media/video/cx23885/cx23885-core.o drivers/media/video/cx23885/altera-ci.h:71:12: warning: ‘altera_ci_tuner_reset’ defined but not used [-Wunused-function] CC [M] drivers/media/video/cx23885/cx23885-i2c.o CC [M] drivers/media/video/cx23885/cx23885-dvb.o drivers/media/video/cx23885/cx23885-dvb.c:505:15: error: variable ‘prof_8000_stb6100_config’ has initializer but incomplete type drivers/media/video/cx23885/cx23885-dvb.c:506:2: error: unknown field ‘tuner_address’ specified in initializer drivers/media/video/cx23885/cx23885-dvb.c:506:2: warning: excess elements in struct initializer [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c:506:2: warning: (near initialization for ‘prof_8000_stb6100_config’) [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c:507:2: error: unknown field ‘refclock’ specified in initializer drivers/media/video/cx23885/cx23885-dvb.c:507:2: warning: excess elements in struct initializer [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c:507:2: warning: (near initialization for ‘prof_8000_stb6100_config’) [enabled by default] drivers/media/video/cx23885/cx23885-dvb.c: In function ‘dvb_register’: drivers/media/video/cx23885/cx23885-dvb.c:1134:8: error: ‘stb6100_attach’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1134:8: note: each undeclared identifier is reported only once for each function it appears in drivers/media/video/cx23885/cx23885-dvb.c:1134:8: error: called object ‘__a’ is not a function drivers/media/video/cx23885/cx23885-dvb.c:1138:32: error: ‘stb6100_set_freq’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1139:32: error: ‘stb6100_get_freq’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1140:32: error: ‘stb6100_set_bandw’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c:1141:32: error: ‘stb6100_get_bandw’ undeclared (first use in this function) drivers/media/video/cx23885/cx23885-dvb.c: At top level: drivers/media/video/cx23885/altera-ci.h:71:12: warning: ‘altera_ci_tuner_reset’ defined but not used [-Wunused-function] make[4]: *** [drivers/media/video/cx23885/cx23885-dvb.o] Error 1 make[3]: *** [drivers/media/video/cx23885] Error 2 make[2]: *** [drivers/media/video] Error 2 make[1]: *** [drivers/media] Error 2 make: *** [drivers] Error 2 Please help in making it work as my Kung Fu ends here Regards, Wojciech diff -r 1da5fed5c8b2 linux/drivers/media/video/cx23885/cx23885-cards.c --- a/linux/drivers/media/video/cx23885/cx23885-cards.c Sun Sep 19 02:23:09 2010 -0300 +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c Sat Oct 02 11:19:50 2010 +0300 @@ -169,6 +169,10 @@ .name = TurboSight TBS 6920, .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_PROF_8000] = { + .name = Prof Revolution DVB-S2 8000, + .portb = CX23885_MPEG_DVB, + }, [CX23885_BOARD_TEVII_S470] = { .name = TeVii S470, .portb = CX23885_MPEG_DVB, @@ -388,6 +392,10 @@ .subdevice = 0x, .card = CX23885_BOARD_TBS_6920, }, { + .subvendor = 0x8000, + .subdevice = 0x3034, + .card = CX23885_BOARD_PROF_8000, + }, { .subvendor = 0xd470, .subdevice = 0x9022, .card = CX23885_BOARD_TEVII_S470, @@ -813,6 +821,7 @@ mdelay(20); cx_set(GP0_IO, 0x00040004); break; + case CX23885_BOARD_PROF_8000: case CX23885_BOARD_TBS_6920: cx_write(MC417_CTL, 0x0036); cx_write(MC417_OEN, 0x1000); @@ -1043,6 +1052,7 @@ ts1-ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1-src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_PROF_8000: case CX23885_BOARD_TEVII_S470: case