Re: [PATCH 3/3] video: exynos_dp: Use the generic PHY driver
On Friday, June 28, 2013 6:27 PM, Kishon Vijay Abraham I wrote: Hi, On Friday 28 June 2013 11:34 AM, Jingoo Han wrote: On Friday, June 28, 2013 2:58 PM, Kishon Vijay Abraham I wrote: Hi, On Friday 28 June 2013 10:54 AM, Jingoo Han wrote: Use the generic PHY API instead of the platform callback to control the DP PHY. The 'phy_label' field is added to the platform data structure to allow PHY lookup on non-dt platforms. Signed-off-by: Jingoo Han jg1@samsung.com --- .../devicetree/bindings/video/exynos_dp.txt| 17 --- drivers/video/exynos/exynos_dp_core.c | 118 ++-- drivers/video/exynos/exynos_dp_core.h |2 + include/video/exynos_dp.h |6 +- 4 files changed, 15 insertions(+), 128 deletions(-) diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 84f10c1..a8320e3 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -1,17 +1,6 @@ The Exynos display port interface should be configured based on the type of panel connected to it. -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: - -reg: - Base address of DP PHY register. - -samsung,enable-mask: - The bit-mask used to enable/disable DP PHY. - For the Panel initialization, we read data from dp-controller node. Required properties for dp-controller: -compatible: @@ -67,12 +56,6 @@ SOC specific portion: interrupt-parent = combiner; clocks = clock 342; clock-names = dp; - - dptx-phy { - reg = 0x10040720; - samsung,enable-mask = 1; - }; - }; Board Specific portion: diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c index 12bbede..bac515b 100644 --- a/drivers/video/exynos/exynos_dp_core.c +++ b/drivers/video/exynos/exynos_dp_core.c @@ -19,6 +19,7 @@ #include linux/interrupt.h #include linux/delay.h #include linux/of.h +#include linux/phy/phy.h #include video/exynos_dp.h @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev) return ERR_PTR(-EINVAL); } - return pd; -} - -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp) -{ - struct device_node *dp_phy_node = of_node_get(dp-dev-of_node); - u32 phy_base; - int ret = 0; - - dp_phy_node = of_find_node_by_name(dp_phy_node, dptx-phy); - if (!dp_phy_node) { - dev_err(dp-dev, could not find dptx-phy node\n); - return -ENODEV; - } - - if (of_property_read_u32(dp_phy_node, reg, phy_base)) { - dev_err(dp-dev, failed to get reg for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - if (of_property_read_u32(dp_phy_node, samsung,enable-mask, - dp-enable_mask)) { - dev_err(dp-dev, failed to get enable-mask for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - dp-phy_addr = ioremap(phy_base, SZ_4); - if (!dp-phy_addr) { - dev_err(dp-dev, failed to ioremap dp-phy\n); - ret = -ENOMEM; - goto err; - } - -err: - of_node_put(dp_phy_node); - - return ret; -} - -static void exynos_dp_phy_init(struct exynos_dp_device *dp) -{ - u32 reg; - - reg = __raw_readl(dp-phy_addr); - reg |= dp-enable_mask; - __raw_writel(reg, dp-phy_addr); -} - -static void exynos_dp_phy_exit(struct exynos_dp_device *dp) -{ - u32 reg; + pd-phy_label = dp; In the case of non-dt boot, this phy_label should have ideally come from platform code. No, this is NOT the case of non-dt. 'pd-phy_label = dp;' is included in exynos_dp_dt_parse_pdata(), not exynos_dp_phy_exit(). Also, exynos_dp_dt_parse_pdata() is called in the case of dt. ah.. right. Do you support non-dt boot. I dont see any modifications in the platform code? Platform code for non-DT has not been added; thus, there is no modification in the platform code. Best regards, Jingoo Han Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] video: exynos_dp: Use the generic PHY driver
On Friday, June 28, 2013 2:58 PM, Kishon Vijay Abraham I wrote: Hi, On Friday 28 June 2013 10:54 AM, Jingoo Han wrote: Use the generic PHY API instead of the platform callback to control the DP PHY. The 'phy_label' field is added to the platform data structure to allow PHY lookup on non-dt platforms. Signed-off-by: Jingoo Han jg1@samsung.com --- .../devicetree/bindings/video/exynos_dp.txt| 17 --- drivers/video/exynos/exynos_dp_core.c | 118 ++-- drivers/video/exynos/exynos_dp_core.h |2 + include/video/exynos_dp.h |6 +- 4 files changed, 15 insertions(+), 128 deletions(-) diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 84f10c1..a8320e3 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -1,17 +1,6 @@ The Exynos display port interface should be configured based on the type of panel connected to it. -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: - -reg: - Base address of DP PHY register. - -samsung,enable-mask: - The bit-mask used to enable/disable DP PHY. - For the Panel initialization, we read data from dp-controller node. Required properties for dp-controller: -compatible: @@ -67,12 +56,6 @@ SOC specific portion: interrupt-parent = combiner; clocks = clock 342; clock-names = dp; - - dptx-phy { - reg = 0x10040720; - samsung,enable-mask = 1; - }; - }; Board Specific portion: diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c index 12bbede..bac515b 100644 --- a/drivers/video/exynos/exynos_dp_core.c +++ b/drivers/video/exynos/exynos_dp_core.c @@ -19,6 +19,7 @@ #include linux/interrupt.h #include linux/delay.h #include linux/of.h +#include linux/phy/phy.h #include video/exynos_dp.h @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev) return ERR_PTR(-EINVAL); } - return pd; -} - -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp) -{ - struct device_node *dp_phy_node = of_node_get(dp-dev-of_node); - u32 phy_base; - int ret = 0; - - dp_phy_node = of_find_node_by_name(dp_phy_node, dptx-phy); - if (!dp_phy_node) { - dev_err(dp-dev, could not find dptx-phy node\n); - return -ENODEV; - } - - if (of_property_read_u32(dp_phy_node, reg, phy_base)) { - dev_err(dp-dev, failed to get reg for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - if (of_property_read_u32(dp_phy_node, samsung,enable-mask, - dp-enable_mask)) { - dev_err(dp-dev, failed to get enable-mask for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - dp-phy_addr = ioremap(phy_base, SZ_4); - if (!dp-phy_addr) { - dev_err(dp-dev, failed to ioremap dp-phy\n); - ret = -ENOMEM; - goto err; - } - -err: - of_node_put(dp_phy_node); - - return ret; -} - -static void exynos_dp_phy_init(struct exynos_dp_device *dp) -{ - u32 reg; - - reg = __raw_readl(dp-phy_addr); - reg |= dp-enable_mask; - __raw_writel(reg, dp-phy_addr); -} - -static void exynos_dp_phy_exit(struct exynos_dp_device *dp) -{ - u32 reg; + pd-phy_label = dp; In the case of non-dt boot, this phy_label should have ideally come from platform code. No, this is NOT the case of non-dt. 'pd-phy_label = dp;' is included in exynos_dp_dt_parse_pdata(), not exynos_dp_phy_exit(). Also, exynos_dp_dt_parse_pdata() is called in the case of dt. But, diff is a little bit confusing. :( Best regards, Jingoo Han Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] video: exynos_dp: Use the generic PHY driver
Hi, On Friday 28 June 2013 11:34 AM, Jingoo Han wrote: On Friday, June 28, 2013 2:58 PM, Kishon Vijay Abraham I wrote: Hi, On Friday 28 June 2013 10:54 AM, Jingoo Han wrote: Use the generic PHY API instead of the platform callback to control the DP PHY. The 'phy_label' field is added to the platform data structure to allow PHY lookup on non-dt platforms. Signed-off-by: Jingoo Han jg1@samsung.com --- .../devicetree/bindings/video/exynos_dp.txt| 17 --- drivers/video/exynos/exynos_dp_core.c | 118 ++-- drivers/video/exynos/exynos_dp_core.h |2 + include/video/exynos_dp.h |6 +- 4 files changed, 15 insertions(+), 128 deletions(-) diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 84f10c1..a8320e3 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -1,17 +1,6 @@ The Exynos display port interface should be configured based on the type of panel connected to it. -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: - -reg: - Base address of DP PHY register. - -samsung,enable-mask: - The bit-mask used to enable/disable DP PHY. - For the Panel initialization, we read data from dp-controller node. Required properties for dp-controller: -compatible: @@ -67,12 +56,6 @@ SOC specific portion: interrupt-parent = combiner; clocks = clock 342; clock-names = dp; - - dptx-phy { - reg = 0x10040720; - samsung,enable-mask = 1; - }; - }; Board Specific portion: diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c index 12bbede..bac515b 100644 --- a/drivers/video/exynos/exynos_dp_core.c +++ b/drivers/video/exynos/exynos_dp_core.c @@ -19,6 +19,7 @@ #include linux/interrupt.h #include linux/delay.h #include linux/of.h +#include linux/phy/phy.h #include video/exynos_dp.h @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev) return ERR_PTR(-EINVAL); } - return pd; -} - -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp) -{ - struct device_node *dp_phy_node = of_node_get(dp-dev-of_node); - u32 phy_base; - int ret = 0; - - dp_phy_node = of_find_node_by_name(dp_phy_node, dptx-phy); - if (!dp_phy_node) { - dev_err(dp-dev, could not find dptx-phy node\n); - return -ENODEV; - } - - if (of_property_read_u32(dp_phy_node, reg, phy_base)) { - dev_err(dp-dev, failed to get reg for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - if (of_property_read_u32(dp_phy_node, samsung,enable-mask, - dp-enable_mask)) { - dev_err(dp-dev, failed to get enable-mask for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - dp-phy_addr = ioremap(phy_base, SZ_4); - if (!dp-phy_addr) { - dev_err(dp-dev, failed to ioremap dp-phy\n); - ret = -ENOMEM; - goto err; - } - -err: - of_node_put(dp_phy_node); - - return ret; -} - -static void exynos_dp_phy_init(struct exynos_dp_device *dp) -{ - u32 reg; - - reg = __raw_readl(dp-phy_addr); - reg |= dp-enable_mask; - __raw_writel(reg, dp-phy_addr); -} - -static void exynos_dp_phy_exit(struct exynos_dp_device *dp) -{ - u32 reg; + pd-phy_label = dp; In the case of non-dt boot, this phy_label should have ideally come from platform code. No, this is NOT the case of non-dt. 'pd-phy_label = dp;' is included in exynos_dp_dt_parse_pdata(), not exynos_dp_phy_exit(). Also, exynos_dp_dt_parse_pdata() is called in the case of dt. ah.. right. Do you support non-dt boot. I dont see any modifications in the platform code? Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 3/3] video: exynos_dp: Use the generic PHY driver
Hi, On Friday 28 June 2013 10:54 AM, Jingoo Han wrote: Use the generic PHY API instead of the platform callback to control the DP PHY. The 'phy_label' field is added to the platform data structure to allow PHY lookup on non-dt platforms. Signed-off-by: Jingoo Han jg1@samsung.com --- .../devicetree/bindings/video/exynos_dp.txt| 17 --- drivers/video/exynos/exynos_dp_core.c | 118 ++-- drivers/video/exynos/exynos_dp_core.h |2 + include/video/exynos_dp.h |6 +- 4 files changed, 15 insertions(+), 128 deletions(-) diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 84f10c1..a8320e3 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -1,17 +1,6 @@ The Exynos display port interface should be configured based on the type of panel connected to it. -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: - -reg: - Base address of DP PHY register. - -samsung,enable-mask: - The bit-mask used to enable/disable DP PHY. - For the Panel initialization, we read data from dp-controller node. Required properties for dp-controller: -compatible: @@ -67,12 +56,6 @@ SOC specific portion: interrupt-parent = combiner; clocks = clock 342; clock-names = dp; - - dptx-phy { - reg = 0x10040720; - samsung,enable-mask = 1; - }; - }; Board Specific portion: diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c index 12bbede..bac515b 100644 --- a/drivers/video/exynos/exynos_dp_core.c +++ b/drivers/video/exynos/exynos_dp_core.c @@ -19,6 +19,7 @@ #include linux/interrupt.h #include linux/delay.h #include linux/of.h +#include linux/phy/phy.h #include video/exynos_dp.h @@ -960,84 +961,15 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev) return ERR_PTR(-EINVAL); } - return pd; -} - -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp) -{ - struct device_node *dp_phy_node = of_node_get(dp-dev-of_node); - u32 phy_base; - int ret = 0; - - dp_phy_node = of_find_node_by_name(dp_phy_node, dptx-phy); - if (!dp_phy_node) { - dev_err(dp-dev, could not find dptx-phy node\n); - return -ENODEV; - } - - if (of_property_read_u32(dp_phy_node, reg, phy_base)) { - dev_err(dp-dev, failed to get reg for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - if (of_property_read_u32(dp_phy_node, samsung,enable-mask, - dp-enable_mask)) { - dev_err(dp-dev, failed to get enable-mask for dptx-phy\n); - ret = -EINVAL; - goto err; - } - - dp-phy_addr = ioremap(phy_base, SZ_4); - if (!dp-phy_addr) { - dev_err(dp-dev, failed to ioremap dp-phy\n); - ret = -ENOMEM; - goto err; - } - -err: - of_node_put(dp_phy_node); - - return ret; -} - -static void exynos_dp_phy_init(struct exynos_dp_device *dp) -{ - u32 reg; - - reg = __raw_readl(dp-phy_addr); - reg |= dp-enable_mask; - __raw_writel(reg, dp-phy_addr); -} - -static void exynos_dp_phy_exit(struct exynos_dp_device *dp) -{ - u32 reg; + pd-phy_label = dp; In the case of non-dt boot, this phy_label should have ideally come from platform code. Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html