Re: Haupp. HVR-1100 problem and DVB-T card
- Messaggio originale - Da: hermann pitton hermann-pit...@arcor.de A: fabio tirapelle ftirape...@yahoo.it I have installed mythtv on this configuration: Asus M3N78-VM GF8200 RGVSM AMD Ath64 X2LV 3100BOX6000+ 1MB Haupp. WinTV HVR-1100 -t/a PCI TechniSat SkyStar 2 DVB-S PCI nVidia GeForce 8200 Ubuntu 8.10 - Linux htpc 2.6.27-11-generic I would try to test the HVR1110 next on another PC with known working PCI hardware, also above different operating systems if possible. Hi Hermann! Thank you for your quick response. I tested the card on a M2N-VM DH and it works. So my best guess is that the card does not work on my actual motherboard. We know that the HVR1110s are properly detected on almost all hardware. Before thinking about replacing mobo/PSU, make sure the card is OK. Do you have a suggestion for a new mobo that you know is working (if I can keep my other hardware that would be great)? Thank you very mutch for your time, Fabio -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Hi Fabio, Am Mittwoch, den 14.10.2009, 13:54 + schrieb fabio tirapelle: - Messaggio originale - Da: hermann pitton hermann-pit...@arcor.de A: fabio tirapelle ftirape...@yahoo.it I have installed mythtv on this configuration: Asus M3N78-VM GF8200 RGVSM AMD Ath64 X2LV 3100BOX6000+ 1MB Haupp. WinTV HVR-1100 -t/a PCI TechniSat SkyStar 2 DVB-S PCI nVidia GeForce 8200 Ubuntu 8.10 - Linux htpc 2.6.27-11-generic I would try to test the HVR1110 next on another PC with known working PCI hardware, also above different operating systems if possible. Hi Hermann! Thank you for your quick response. I tested the card on a M2N-VM DH and it works. So my best guess is that the card does not work on my actual motherboard. We know that the HVR1110s are properly detected on almost all hardware. Before thinking about replacing mobo/PSU, make sure the card is OK. Do you have a suggestion for a new mobo that you know is working (if I can keep my other hardware that would be great)? the mobo might need some quirk i'm not aware off. Since we do not have any other such report yet, knock on wood, I would expect all other hardware is still fine. Cheers, Hermann -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Am Sonntag, den 11.10.2009, 19:29 + schrieb fabio tirapelle: Hi Hermann Hi Fabio, Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: Hi I have installed mythtv on this configuration: Asus M3N78-VM GF8200 RGVSM AMD Ath64 X2LV 3100BOX6000+ 1MB Haupp. WinTV HVR-1100 -t/a PCI TechniSat SkyStar 2 DVB-S PCI nVidia GeForce 8200 Ubuntu 8.10 - Linux htpc 2.6.27-11-generic did send to those likely interested too and might be able to give better advice. Two questions 1) But the Haupp. WinTV will not be found even if I have followed http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 http://ubuntuforums.org/showthread.php?t=623126page=2 (#12) Output of dmesg [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A - Link[LNKA] - GSI 17 (level, low) - IRQ 17 [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 [ 13.078664] b2c2-flexcop: i2c master_xfer failed [ 13.078893] b2c2-flexcop: i2c master_xfer failed [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 13.078897] CX24123: wrong demod revision: 87 [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 [ 13.363517] saa7134 :01:07.0: PCI INT A - Link[LNKB] - GSI 16 (level, low) - IRQ 16 [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, latency: 255, mmio: 0x0 Memory allocation at the PCI bus fails and PCI latency is very high for nothing in the end. [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC [card=0,autodetected] Either the eeprom is corrupted, or more likely, this fails because of the previous failing. [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 [ 13.393682] saa7134 ALSA driver for DMA sound loaded [ 13.393685] saa7134 ALSA: no saa7134 cards found ouput lspci 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 2) What kind of DVB-T card will you suggest for my configuration instead of Hauppage WinTv? We have some unknowns on the various Hauppauge 1110s, but in general they are assumed to be well supported. They are all auto eeprom detectable and only for latest revisions you need some latest mercurial v4l-dvb. These look good now too. Could you try again with the HVR1110 as the only PCI card? I have tried without success If this still fails, the mobo seems not to be best treated anyway too, I would guess the card is broken. What kind of mobo do you suggest? If necessary I can buy a new mobo Cheers, Hermann Thanks Fabio Hi Fabio, I would try to test the HVR1110 next on another PC with known working PCI hardware, also above different operating systems if possible. We know that the HVR1110s are properly detected on almost all hardware. Before thinking about replacing mobo/PSU, make sure the card is OK. Cheers, Hermann -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Haupp. HVR-1100 problem and DVB-T card
Hi Hermann Hi Fabio, Am Donnerstag, den 08.10.2009, 20:02 + schrieb fabio tirapelle: Hi I have installed mythtv on this configuration: Asus M3N78-VM GF8200 RGVSM AMD Ath64 X2LV 3100BOX6000+ 1MB Haupp. WinTV HVR-1100 -t/a PCI TechniSat SkyStar 2 DVB-S PCI nVidia GeForce 8200 Ubuntu 8.10 - Linux htpc 2.6.27-11-generic did send to those likely interested too and might be able to give better advice. Two questions 1) But the Haupp. WinTV will not be found even if I have followed http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110 http://ubuntuforums.org/showthread.php?t=623126page=2 (#12) Output of dmesg [ 13.062214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 13.062223] b2c2_flexcop_pci :01:06.0: PCI INT A - Link[LNKA] - GSI 17 (level, low) - IRQ 17 [ 13.076654] DVB: registering new adapter (FlexCop Digital TV device) [ 13.078432] b2c2-flexcop: MAC address = 00:d0:d7:0d:30:88 [ 13.078664] b2c2-flexcop: i2c master_xfer failed [ 13.078893] b2c2-flexcop: i2c master_xfer failed [ 13.078895] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 13.078897] CX24123: wrong demod revision: 87 [ 13.101063] saa7130/34: v4l2 driver version 0.2.14 loaded [ 13.360642] b2c2-flexcop: found 'ST STV0299 DVB-S' . [ 13.360647] DVB: registering frontend 0 (ST STV0299 DVB-S)... [ 13.360768] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 13.363507] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 [ 13.363517] saa7134 :01:07.0: PCI INT A - Link[LNKB] - GSI 16 (level, low) - IRQ 16 [ 13.363523] saa7133[0]: found at :01:07.0, rev: 255, irq: 16, latency: 255, mmio: 0x0 Memory allocation at the PCI bus fails and PCI latency is very high for nothing in the end. [ 13.363528] saa7133[0]: subsystem: :, board: UNKNOWN/GENERIC [card=0,autodetected] Either the eeprom is corrupted, or more likely, this fails because of the previous failing. [ 13.363531] saa7133[0]: can't get MMIO memory @ 0x0 [ 13.363538] saa7134: probe of :01:07.0 failed with error -16 [ 13.393682] saa7134 ALSA driver for DMA sound loaded [ 13.393685] saa7134 ALSA: no saa7134 cards found ouput lspci 01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 2) What kind of DVB-T card will you suggest for my configuration instead of Hauppage WinTv? We have some unknowns on the various Hauppauge 1110s, but in general they are assumed to be well supported. They are all auto eeprom detectable and only for latest revisions you need some latest mercurial v4l-dvb. These look good now too. Could you try again with the HVR1110 as the only PCI card? I have tried without success If this still fails, the mobo seems not to be best treated anyway too, I would guess the card is broken. What kind of mobo do you suggest? If necessary I can buy a new mobo Cheers, Hermann Thanks Fabio -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
