Re: Wintv-HVR-1120 woes
On Sunday 24 October 2010 22:22:18 Sasha Sirotkin wrote: On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. Strange. I use kaffeine and it works really well (except when getting errors mentionned in 1.). I also tried to use w_scan as you talked about it, and it works (output available at the end of this email). So, I'm trying to understand your problems : - Do you get errors? (in dmesg for example?) - Does it work under Windows? / Are you sure your antenna is good? 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner I set up a Windows so I'm sure my Analog TV is working. After having set SECAM and france in /etc/tvtime/tvtime.xml, I have run tvtime-scanner and it seems to be successful: sh tvtime-scanner Reading configuration from /etc/tvtime/tvtime.xml Scanning using TV standard SECAM. Scanning from 44.00 MHz to 958.00 MHz. Found a channel at 45.00 MHz (44.75 - 45.00 MHz), adding to channel list. I/O warning : failed to load external entity /data/./home/albinkauf/.tvtime/stationlist.xml station: No station file found, creating a new one. Found a channel at 101.50 MHz (101.25 - 101.50 MHz), adding to channel list. Found a channel at 117.50 MHz (117.25 - 117.50 MHz), adding to channel list. Found a channel at 145.00 MHz (144.75 - 145.00 MHz), adding to channel list. Found a channel at 302.75 MHz (302.50 - 302.75 MHz), adding to channel list. Found a channel at 389.00 MHz (388.75 - 389.00 MHz), adding to channel list. Found a channel at 480.25 MHz (479.25 - 481.00 MHz), adding to channel list. Found a channel at 503.50 MHz (503.25 - 503.75 MHz), adding to channel list. Found a channel at 505.00 MHz (504.75 - 505.00 MHz), adding to channel list. Found a channel at 528.50 MHz (528.25 - 528.50 MHz), adding to channel list. Found a channel at 544.75 MHz (544.50 - 544.75 MHz), adding to channel list. Found a channel at 588.75 MHz (588.50 - 588.75 MHz), adding to channel list. Found a channel at 639.75 MHz (639.50 - 639.75 MHz), adding to channel list. Found a channel at 646.00 MHz (645.75 - 646.00 MHz), adding to channel list. Found a channel at 664.75 MHz (664.50 - 664.75 MHz), adding to channel list. Found a channel at 675.50 MHz (675.25 - 675.50 MHz), adding to channel list. Found a channel at 702.00 MHz (701.75 - 702.00 MHz), adding to channel list. Found a channel at 711.00 MHz (710.75 - 711.00 MHz), adding to channel list. Found a channel at 749.25 MHz (749.00 - 749.25 MHz), adding to channel list. Found a channel at 778.00 MHz (777.75 - 778.00 MHz), adding to channel list. Found a channel at 924.00 MHz (923.75 - 924.00 MHz), adding to channel list. Found a channel at 932.75 MHz (932.50 - 932.75 MHz), adding to channel list. tvtime-scanner 0.10s user 139.36s system 2% cpu 1:44:44.25 total However, I've seen a lot of errors related to tda18271 in `dmesg` and I can't get any picture when running tvime. Do you also get that kind of errors? In order to solve the 1st problem (TV sometimes not working), I also try to boot under Windows in order to load the the original tda10048 firmware. Then, I started my Linux box several times (without the firmware available in /lib/firmware). After 4 boots, it fails so the firmware is probably not the sources of our problems. Then, I've started to read the sources and the documentation of the saa7134 chip. This documentation is not bad but it misses particularities of the Hauppauge HVR1120 such as how the different chips are plugged together. Did Hauppauge make this kind of documentation public? Does anyone know where can I find it? Thanks, - Output of w_scan
Re: Wintv-HVR-1120 woes
On Tue, Oct 26, 2010 at 9:07 PM, fabio tirapelle ftirape...@yahoo.it wrote: I have tried again. rm -i dvb-fe-tda10048-1.0.fw cp dvb-fe-tda10046.fw dvb-fe-tda10048-1.0.fw Now shutdown and boot dmesg [ 47.724011] tda18271: RF tracking filter calibration complete [ 47.780018] tda829x 8-004b: type set to tda8290+18271 [ 52.756163] saa7133[0]: registered device video0 [v4l2] [ 52.756260] saa7133[0]: registered device vbi0 [ 52.756312] saa7133[0]: registered device radio0 [ 52.774804] saa7134 ALSA driver for DMA sound loaded [ 52.774818] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 52.774837] saa7133[0]/alsa: saa7133[0] at 0xfcfff800 irq 16 registered as card -2 [ 52.826225] dvb_init() allocating 1 frontend [ 53.176016] tda829x 8-004b: type set to tda8290 [ 53.216128] tda18271 8-0060: attaching existing instance [ 53.216133] DVB: registering new adapter (saa7133[0]) [ 53.216137] DVB: registering adapter 3 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.744012] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.744470] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.789956] tda10048_firmware_upload: firmware read 24478 bytes. [ 53.789959] tda10048_firmware_upload: firmware incorrect size [ 53.789963] tda10048_firmware_upload: firmware upload failed [ 55.240026] tda18271_read_regs: ERROR: i2c_transfer returned: -5 [ 55.852518] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 55.852526] tda18271_set_analog_params: error -5 on line 1041 [ 91.004017] Clocksource tsc unstable (delta = -308694953 ns) [ 810.460024] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 810.460039] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 810.463999] tda10048_firmware_upload: firmware read 24478 bytes. [ 810.464081] tda10048_firmware_upload: firmware incorrect size [ 810.464091] tda10048_firmware_upload: firmware upload failed now my WinTv-1120 works When you say works, what exactly do you mean? Can you try to run w_scan ? - Messaggio originale - Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 18:39:59 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 1:51 PM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Albin Kauffmann albin.kauffm...@gmail.com A: Sasha Sirotkin demi...@femtolinux.com Cc: fabio tirapelle ftirape...@yahoo.it; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 13:20:13 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin demi...@femtolinux.com wrote: On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu This is weird. I will try this workaround tonight. Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still loaded in the TV card and that this scenario has not changed anything. Fabio, have you tried to reboot several times in order to see if the problem is really fixed? And are you still getting some ERROR messages in `dmesg`? If not, this is good but I don't understand :) Yes, if several times means 3 times. But I think this isn't a good practice. So I have bought another card (NOVA-T-Stick) and I wait for a real solution. As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I haven't had problems with this version of Ubuntu. But the linux-firmware-nonfree package for Ubuntu 9.10 (karmic) didn't contain the dvb-fe-tda10048-1.0.fw (see http://packages.ubuntu.com/karmic/all/linux-firmware-nonfree/filelist) The dvb-fe-tda10048-1.0.fw was introduced with lucid (see http://packages.ubuntu.com/lucid/all/linux-firmware-nonfree/filelist). And now the question. Why without dvb-fe-tda10048-1.0.fw I haven't had problems and now with Ubuntu
Re: Wintv-HVR-1120 woes
I have tried again. rm -i dvb-fe-tda10048-1.0.fw cp dvb-fe-tda10046.fw dvb-fe-tda10048-1.0.fw Now shutdown and boot dmesg [ 47.724011] tda18271: RF tracking filter calibration complete [ 47.780018] tda829x 8-004b: type set to tda8290+18271 [ 52.756163] saa7133[0]: registered device video0 [v4l2] [ 52.756260] saa7133[0]: registered device vbi0 [ 52.756312] saa7133[0]: registered device radio0 [ 52.774804] saa7134 ALSA driver for DMA sound loaded [ 52.774818] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 52.774837] saa7133[0]/alsa: saa7133[0] at 0xfcfff800 irq 16 registered as card -2 [ 52.826225] dvb_init() allocating 1 frontend [ 53.176016] tda829x 8-004b: type set to tda8290 [ 53.216128] tda18271 8-0060: attaching existing instance [ 53.216133] DVB: registering new adapter (saa7133[0]) [ 53.216137] DVB: registering adapter 3 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.744012] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.744470] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.789956] tda10048_firmware_upload: firmware read 24478 bytes. [ 53.789959] tda10048_firmware_upload: firmware incorrect size [ 53.789963] tda10048_firmware_upload: firmware upload failed [ 55.240026] tda18271_read_regs: ERROR: i2c_transfer returned: -5 [ 55.852518] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 55.852526] tda18271_set_analog_params: error -5 on line 1041 [ 91.004017] Clocksource tsc unstable (delta = -308694953 ns) [ 810.460024] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 810.460039] saa7134 :01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 810.463999] tda10048_firmware_upload: firmware read 24478 bytes. [ 810.464081] tda10048_firmware_upload: firmware incorrect size [ 810.464091] tda10048_firmware_upload: firmware upload failed now my WinTv-1120 works - Messaggio originale - Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 18:39:59 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 1:51 PM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Albin Kauffmann albin.kauffm...@gmail.com A: Sasha Sirotkin demi...@femtolinux.com Cc: fabio tirapelle ftirape...@yahoo.it; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 13:20:13 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin demi...@femtolinux.com wrote: On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf HauppaugeWinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu This is weird. I will try this workaround tonight. Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still loaded in the TV card and that this scenario has not changed anything. Fabio, have you tried to reboot several times in order to see if the problem is really fixed? And are you still getting some ERROR messages in `dmesg`? If not, this is good but I don't understand :) Yes, if several times means 3 times. But I think this isn't a good practice. So I have bought another card (NOVA-T-Stick) and I wait for a real solution. As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I haven't had problems with this version of Ubuntu. But the linux-firmware-nonfree package for Ubuntu 9.10 (karmic) didn't contain the dvb-fe-tda10048-1.0.fw (see http://packages.ubuntu.com/karmic/all/linux-firmware-nonfree/filelist) The dvb-fe-tda10048-1.0.fw was introduced with lucid (see http://packages.ubuntu.com/lucid/all/linux-firmware-nonfree/filelist). And now the question. Why without dvb-fe-tda10048-1.0.fw I haven't had problems and now with Ubuntu 10.04 I have problem exactly with this firmware? So I have renamed the dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw but I have seen that Ubuntu checks if the firmware
Re: Wintv-HVR-1120 woes
My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. But I know that isn't a good practice. - Messaggio originale - Da: Sasha Sirotkin demi...@femtolinux.com A: Albin Kauffmann albin.kauffm...@gmail.com Cc: linux-media@vger.kernel.org Inviato: Dom 24 ottobre 2010, 23:45:55 Oggetto: Re: Wintv-HVR-1120 woes On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin demi...@femtolinux.com wrote: On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner Cheers, -- Albin Kauffmann I'm trying to downgrade the kernel now to see if it helps I went back as far as 2.6.30 and I still have this problem. 2.6.29 does not recognize this card at all. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu But I know that isn't a good practice. - Messaggio originale - Da: Sasha Sirotkin demi...@femtolinux.com A: Albin Kauffmann albin.kauffm...@gmail.com Cc: linux-media@vger.kernel.org Inviato: Dom 24 ottobre 2010, 23:45:55 Oggetto: Re: Wintv-HVR-1120 woes On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin demi...@femtolinux.com wrote: On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner Cheers, -- Albin Kauffmann I'm trying to downgrade the kernel now to see if it helps I went back as far as 2.6.30 and I still have this problem. 2.6.29 does not recognize this card at all. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? But I know that isn't a good practice. - Messaggio originale - Da: Sasha Sirotkin demi...@femtolinux.com A: Albin Kauffmann albin.kauffm...@gmail.com Cc: linux-media@vger.kernel.org Inviato: Dom 24 ottobre 2010, 23:45:55 Oggetto: Re: Wintv-HVR-1120 woes On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin demi...@femtolinux.com wrote: On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner Cheers, -- Albin Kauffmann I'm trying to downgrade the kernel now to see if it helps I went back as far as 2.6.30 and I still have this problem. 2.6.29 does not recognize this card at all. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu This is weird. I will try this workaround tonight. I hope that anyone will eventually reveal an interest to solve this bug. I'd happily do it myself, but I cannot really afford to spend enough time to start digging into these sources, but I'm willing to help. But I know that isn't a good practice. - Messaggio originale - Da: Sasha Sirotkin demi...@femtolinux.com A: Albin Kauffmann albin.kauffm...@gmail.com Cc: linux-media@vger.kernel.org Inviato: Dom 24 ottobre 2010, 23:45:55 Oggetto: Re: Wintv-HVR-1120 woes On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin demi...@femtolinux.com wrote: On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner Cheers, -- Albin Kauffmann I'm trying to downgrade the kernel now to see if it helps I went back as far as 2.6.30 and I still have this problem. 2.6.29 does not recognize this card at all. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin demi...@femtolinux.com wrote: On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu This is weird. I will try this workaround tonight. Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still loaded in the TV card and that this scenario has not changed anything. Fabio, have you tried to reboot several times in order to see if the problem is really fixed? And are you still getting some ERROR messages in `dmesg`? If not, this is good but I don't understand :) Cheers, -- Albin Kauffmann -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
Da: Albin Kauffmann albin.kauffm...@gmail.com A: Sasha Sirotkin demi...@femtolinux.com Cc: fabio tirapelle ftirape...@yahoo.it; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 13:20:13 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin demi...@femtolinux.com wrote: On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu This is weird. I will try this workaround tonight. Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still loaded in the TV card and that this scenario has not changed anything. Fabio, have you tried to reboot several times in order to see if the problem is really fixed? And are you still getting some ERROR messages in `dmesg`? If not, this is good but I don't understand :) Yes, if several times means 3 times. But I think this isn't a good practice. So I have bought another card (NOVA-T-Stick) and I wait for a real solution. As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I haven't had problems with this version of Ubuntu. But the linux-firmware-nonfree package for Ubuntu 9.10 (karmic) didn't contain the dvb-fe-tda10048-1.0.fw (see http://packages.ubuntu.com/karmic/all/linux-firmware-nonfree/filelist) The dvb-fe-tda10048-1.0.fw was introduced with lucid (see http://packages.ubuntu.com/lucid/all/linux-firmware-nonfree/filelist). And now the question. Why without dvb-fe-tda10048-1.0.fw I haven't had problems and now with Ubuntu 10.04 I have problem exactly with this firmware? So I have renamed the dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw but I have seen that Ubuntu checks if the firmware is consistent. In the next two days I cannot post my dmesg, as I cannot access to my mediacenter. Tuesday night I will post it. What you think about my consideration about Ubuntu 9.10 and 10.04? Cheers, -- Albin Kauffmann -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Mon, Oct 25, 2010 at 1:51 PM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Albin Kauffmann albin.kauffm...@gmail.com A: Sasha Sirotkin demi...@femtolinux.com Cc: fabio tirapelle ftirape...@yahoo.it; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 13:20:13 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 9:46 AM, Sasha Sirotkin demi...@femtolinux.com wrote: On Mon, Oct 25, 2010 at 9:24 AM, fabio tirapelle ftirape...@yahoo.it wrote: Da: Sasha Sirotkin demi...@femtolinux.com A: fabio tirapelle ftirape...@yahoo.it Cc: Albin Kauffmann albin.kauffm...@gmail.com; linux-media@vger.kernel.org Inviato: Lun 25 ottobre 2010, 09:18:28 Oggetto: Re: Wintv-HVR-1120 woes On Mon, Oct 25, 2010 at 8:16 AM, fabio tirapelle ftirape...@yahoo.it wrote: My WinTV-HVR-1120 works if I delete dvb-fe-tda10048-1.0.fw and rename dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw (see cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread). After reboot my WinTV-HVR-1120 works. Ubuntu recognizes that the firmware isn't correct and doesn't load the firmware. How come it works without the firmware !? Is it possible that you booted into Windows before that and there is a correct firmware already running in the card ? No my mediacenter works only on Ubuntu This is weird. I will try this workaround tonight. Actually, I think that the dvb-fe-tda10048-1.0.fw firmware is still loaded in the TV card and that this scenario has not changed anything. Fabio, have you tried to reboot several times in order to see if the problem is really fixed? And are you still getting some ERROR messages in `dmesg`? If not, this is good but I don't understand :) Yes, if several times means 3 times. But I think this isn't a good practice. So I have bought another card (NOVA-T-Stick) and I wait for a real solution. As I have written, the WinTV-1120 did work correctly with Ubunt 9.10. I haven't had problems with this version of Ubuntu. But the linux-firmware-nonfree package for Ubuntu 9.10 (karmic) didn't contain the dvb-fe-tda10048-1.0.fw (see http://packages.ubuntu.com/karmic/all/linux-firmware-nonfree/filelist) The dvb-fe-tda10048-1.0.fw was introduced with lucid (see http://packages.ubuntu.com/lucid/all/linux-firmware-nonfree/filelist). And now the question. Why without dvb-fe-tda10048-1.0.fw I haven't had problems and now with Ubuntu 10.04 I have problem exactly with this firmware? So I have renamed the dvb-fe-tda10046.fw in dvb-fe-tda10048-1.0.fw but I have seen that Ubuntu checks if the firmware is consistent. I did the same and it did not help me much - I get the same errors and DVB scan does not work. In the next two days I cannot post my dmesg, as I cannot access to my mediacenter. Tuesday night I will post it. What you think about my consideration about Ubuntu 9.10 and 10.04? Cheers, -- Albin Kauffmann -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. Cheers, -- Albin Kauffmann -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner Cheers, -- Albin Kauffmann I'm trying to downgrade the kernel now to see if it helps -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
On Sun, Oct 24, 2010 at 10:22 PM, Sasha Sirotkin demi...@femtolinux.com wrote: On Sun, Oct 24, 2010 at 8:55 PM, Albin Kauffmann albin.kauffm...@gmail.com wrote: On Thursday 21 October 2010 23:25:29 Sasha Sirotkin wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) yes, indeed :( (cf Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 thread) 2. DVB-T scan (using w_scan) produces no results Is this happening after each reboot? As far as I'm concerned, I've never had problems with DVB-T scans. Almost always. I think I had a lucky reboot or two, but most of the time DVB-T scan produces nothing. 3. Analog seems to work, but with very poor quality I just tried to use Analog TV in order to confirm the problem but I cannot get any picture. Maybe I just don't know how to use it. I'm using commands like (I'm located in France): mplayer tv:// -tv driver=v4l2:norm=SECAM:chanlist=france -tvscan autostart ... and just get some snow on scanned channels. As I might have a problem with my antenna (an interior one), I am going to test it under Windows and report back my experience. I'm using tvtime-scanner Cheers, -- Albin Kauffmann I'm trying to downgrade the kernel now to see if it helps I went back as far as 2.6.30 and I still have this problem. 2.6.29 does not recognize this card at all. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Wintv-HVR-1120 woes
In addition, during analog scan, I get the following errors: [ 6327.420037] tda18271c2_rf_tracking_filters_correction: [1-0060|M] error -22 on line 278 [ 6327.468028] tda18271_calc_ir_measure: [1-0060|M] error -34 on line 716 [ 6327.468074] tda18271_calc_bp_filter: [1-0060|M] error -34 on line 648 [ 6327.468117] tda18271_calc_rf_band: [1-0060|M] error -34 on line 682 [ 6327.468159] tda18271_calc_gain_taper: [1-0060|M] error -34 on line 699 On Thu, Oct 21, 2010 at 11:25 PM, Sasha Sirotkin demi...@femtolinux.com wrote: I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) 2. DVB-T scan (using w_scan) produces no results 3. Analog seems to work, but with very poor quality Any suggestions would be greatly appreciated. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Wintv-HVR-1120 woes
I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) 2. DVB-T scan (using w_scan) produces no results 3. Analog seems to work, but with very poor quality Any suggestions would be greatly appreciated. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Wintv-HVR-1120 woes
I'm having all sorts of troubles with Wintv-HVR-1120 on Ubuntu 10.10 (kernel 2.6.35-22). Judging from what I've seen on the net, including this mailing list, I'm not the only one not being able to use this card and no solution seem to exist. Problems: 1. The driver yells various cryptic error messages (tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5, tda18271_set_analog_params: [1-0060|M] error -5 on line 1045, etc) 2. DVB-T scan (using w_scan) produces no results 3. Analog seems to work, but with very poor quality Any suggestions would be greatly appreciated. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
