Re: twl4030_usb porting advice
On 12/17/10 10:11, Felipe Balbi wrote: Hi, On Fri, Dec 17, 2010 at 07:23:43AM +, Tomasz Mloduchowski wrote: I'm quoting a snippet below for commenting. [ 1.639892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.646759] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 1.646881] ehci-omap ehci-omap.0: failed to get ehci port1 regulator This is alarming. Please add this patch to get the error code: This is also alarming... Let's increase the timeout just for a debugging purpose: I've applied both patches. The new kernel log in its entirety resides here: http://pastie.org/1384896 Unfortunately seems like pastie.org is down: 503 Service Unavailable No server is available to handle this request. And the line of interest is [ 2.085449] ehci-omap ehci-omap.0: failed to get ehci port1 regulator -- 0 Unfortunately, I don't understand what an error code of '0' might mean here, but it surely does something. That's funny, 0 means success, not sure why that branch is being called. I'll wait a bit until pastie is back, but if you could append to your reply the output of dmesg | grep -i ehci I'd be glad. I really appreciate your help, this sort of a bug that really stunned me. I've noticed that the variable storing the error code is set to NULL right before printing it out :(, so I corrected this mistake. [2.065216] ehci-omap ehci-omap.0: failed to get ehci port1 regulator -- -19 I also switched to pastebin, with the new, more meaningful dmesg: http://pastebin.com/86kfLT2G Cheers, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: twl4030_usb porting advice
On 12/16/10 09:09, Felipe Balbi wrote: On Wed, Dec 15, 2010 at 01:09:42PM +, Tomasz Mloduchowski wrote: On 12/15/10 12:39, Felipe Balbi wrote: On Wed, Dec 15, 2010 at 12:27:10PM +, Tomasz Mloduchowski wrote: I would gladly welcome any pointers that could help me solve this issue. you're connecting a FS/LS device to EHCI port, that doesn't work. OMAP can't handle port handoff to companion OHCI controller, then it fails not being able to enumerate the device. Try remuxing your port to OHCI controller and disabling EHCI from Kconfig. It actually is a HS device (it's a 4-port hub) - when booting the vendor supplied kernel (based off 2.6.32, i.e. pre -IR redesign), the device identifies as follows: I've also made a mistake describing the pastebins - the working, PSP kernel boot log is here: http://pastie.org/1379102 while the non-working git kernel messages are here (with CONFIG_USB_DEBUG): http://pastie.org/1379100 I'm quoting a snippet below for commenting. [ 1.639892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.646759] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 1.646881] ehci-omap ehci-omap.0: failed to get ehci port1 regulator This is alarming. Please add this patch to get the error code: This is also alarming... Let's increase the timeout just for a debugging purpose: I've applied both patches. The new kernel log in its entirety resides here: http://pastie.org/1384896 And the line of interest is [2.085449] ehci-omap ehci-omap.0: failed to get ehci port1 regulator -- 0 Unfortunately, I don't understand what an error code of '0' might mean here, but it surely does something. Cheers, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
twl4030_usb porting advice
Hi! I'm trying to port the support patches for an OMAP3530 based development kit by Technexion. Technexion provides patches for PSP kernel trees, I need to use a kernel with modern IR stack, so I'm developing against linux-omap-2.6.git I'm mostly done with the initial port, however, I'm stuck with the following issue: [2.991973] ehci-omap ehci-omap.0: port 2 full speed -- companion [2.992034] ehci-omap ehci-omap.0: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT [2.992095] hub 1-0:1.0: port 2 not reset yet, waiting 50ms [3.055511] asoc: twl4030-hifi - omap-mcbsp-dai.1 mapping ok [3.061920] ehci-omap ehci-omap.0: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [3.061981] hub 1-0:1.0: unable to enumerate USB device on port 2 [3.068389] hub 1-0:1.0: state 7 ports 3 chg evt 0004 I would gladly welcome any pointers that could help me solve this issue. Cheers, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: twl4030_usb porting advice
I would gladly welcome any pointers that could help me solve this issue. you're connecting a FS/LS device to EHCI port, that doesn't work. OMAP can't handle port handoff to companion OHCI controller, then it fails not being able to enumerate the device. Try remuxing your port to OHCI controller and disabling EHCI from Kconfig. It actually is a HS device (it's a 4-port hub) - when booting the vendor supplied kernel (based off 2.6.32, i.e. pre -IR redesign), the device identifies as follows: Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB with the following boot messages: usb 1-2: new high speed USB device using ehci-omap and address 2 usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-2: Product: USB2.0 Hub hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected I've pasted the boot log for my kernel: http://pastie.org/1379102 And the boot log for the original kernel: http://pastie.org/1379100 Cheers, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: twl4030_usb porting advice
On 12/15/10 12:39, Felipe Balbi wrote: On Wed, Dec 15, 2010 at 12:27:10PM +, Tomasz Mloduchowski wrote: I would gladly welcome any pointers that could help me solve this issue. you're connecting a FS/LS device to EHCI port, that doesn't work. OMAP can't handle port handoff to companion OHCI controller, then it fails not being able to enumerate the device. Try remuxing your port to OHCI controller and disabling EHCI from Kconfig. It actually is a HS device (it's a 4-port hub) - when booting the vendor supplied kernel (based off 2.6.32, i.e. pre -IR redesign), the device identifies as follows: Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB with the following boot messages: usb 1-2: new high speed USB device using ehci-omap and address 2 usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-2: Product: USB2.0 Hub hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected I've pasted the boot log for my kernel: http://pastie.org/1379102 And the boot log for the original kernel: http://pastie.org/1379100 It could be a bug on the reset sequence on ehci-omap.c, do you have anything connected to any of the hub ports ? Please enable CONFIG_USB_DEBUG on your kernel config and grab a bit more information. Also, boot the machine without the device attached and after booting run: # dmesg -c then attach the device, then grab the output of dmesg. I don't have the ability to disconnect the hub - it's integrated on the board :( I've also made a mistake describing the pastebins - the working, PSP kernel boot log is here: http://pastie.org/1379102 while the non-working git kernel messages are here (with CONFIG_USB_DEBUG): http://pastie.org/1379100 Cheers, Tomasz -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
