Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
On 10/07/2013 11:25 AM, Balaji T K wrote: Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com --- Rebase to for_3.13/dts and removed ti,non-removable arch/arm/boot/dts/dra7-evm.dts | 13 + 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 65cd15a..3abf5f4 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = memory; reg = 0x8000 0x6000; /* 1536 MB */ }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = regulator-fixed; + regulator-name = mmc2_3v3; + regulator-min-microvolt = 330; + regulator-max-microvolt = 330; + }; }; dra7_pmx_core { @@ -256,3 +263,9 @@ vmmc-supply = ldo1_reg; bus-width = 4; }; + +mmc2 { + status = okay; + vmmc-supply = mmc2_3v3; + bus-width = 8; +}; boot tested on DRA7-EVM voltage rail is correct based on schematics(rev d1) too. Reviewed-by: Nishanth Menon n...@ti.com Tested-by: Nishanth Menon n...@ti.com -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
On Monday 07 October 2013 09:55 PM, Balaji T K wrote: Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com Acked-by: Sekhar Nori nsek...@ti.com Thanks, Sekhar -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com --- Rebase to for_3.13/dts and removed ti,non-removable arch/arm/boot/dts/dra7-evm.dts | 13 + 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 65cd15a..3abf5f4 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = memory; reg = 0x8000 0x6000; /* 1536 MB */ }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = regulator-fixed; + regulator-name = mmc2_3v3; + regulator-min-microvolt = 330; + regulator-max-microvolt = 330; + }; }; dra7_pmx_core { @@ -256,3 +263,9 @@ vmmc-supply = ldo1_reg; bus-width = 4; }; + +mmc2 { + status = okay; + vmmc-supply = mmc2_3v3; + bus-width = 8; +}; -- 1.7.5.4 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
On 9/25/2013 9:47 PM, Balaji T K wrote: On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote: + Sekhar Hi Balaji, On 26/08/2013 15:53, Balaji T K wrote: Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com --- arch/arm/boot/dts/dra7-evm.dts | 14 ++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a59bbd0..2062724 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = memory; reg = 0x8000 0x6000; /* 1536 MB */ }; + +mmc2_3v3: fixedregulator-mmc2 { +compatible = regulator-fixed; +regulator-name = mmc2_3v3; +regulator-min-microvolt = 330; +regulator-max-microvolt = 330; +}; }; dra7_pmx_core { @@ -257,3 +264,10 @@ vmmc-supply = ldo1_reg; bus-width = 4; }; + +mmc2 { +status = okay; +vmmc-supply = mmc2_3v3; +bus-width = 8; +ti,non-removable; Sekhar just posted a series to replace that with a non-TI attribute: non-removable. I'm not sure if this got merged, but it might be good to use the standard attribute instead. Hi Benoit, Those patches are not merged yet, standard attribute is good, but few cleanups are needed before ti,non-removable can be replaced by standard non-removable, no_regulator_off_init flag set under ti,non-removable is needed to detect eMMC during boot on OMAP4 devices to keep regulator ON during init. Given that eMMC on dra7-evm is powered by always ON regulator, ti,non-removable and standard attribute will behave same way. Let me know if you want to remove ti,non-removable attribute from this patch. I dont think its an issue if ti,non-removable and non-removable behave exactly the same. In fact, it will be confusing if they behave differently. I understand there is a need to clean-up the code around no_regulator_off_init, but I am hoping that can be kept separate from moving to a generic binding. The two clean-ups can be done independent of each other. Thanks, Sekhar -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote: + Sekhar Hi Balaji, On 26/08/2013 15:53, Balaji T K wrote: Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com --- arch/arm/boot/dts/dra7-evm.dts | 14 ++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a59bbd0..2062724 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = memory; reg = 0x8000 0x6000; /* 1536 MB */ }; + +mmc2_3v3: fixedregulator-mmc2 { +compatible = regulator-fixed; +regulator-name = mmc2_3v3; +regulator-min-microvolt = 330; +regulator-max-microvolt = 330; +}; }; dra7_pmx_core { @@ -257,3 +264,10 @@ vmmc-supply = ldo1_reg; bus-width = 4; }; + +mmc2 { +status = okay; +vmmc-supply = mmc2_3v3; +bus-width = 8; +ti,non-removable; Sekhar just posted a series to replace that with a non-TI attribute: non-removable. I'm not sure if this got merged, but it might be good to use the standard attribute instead. Hi Benoit, Those patches are not merged yet, standard attribute is good, but few cleanups are needed before ti,non-removable can be replaced by standard non-removable, no_regulator_off_init flag set under ti,non-removable is needed to detect eMMC during boot on OMAP4 devices to keep regulator ON during init. Given that eMMC on dra7-evm is powered by always ON regulator, ti,non-removable and standard attribute will behave same way. Let me know if you want to remove ti,non-removable attribute from this patch. Regards, Benoit -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
+ Sekhar Hi Balaji, On 26/08/2013 15:53, Balaji T K wrote: Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com --- arch/arm/boot/dts/dra7-evm.dts | 14 ++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a59bbd0..2062724 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = memory; reg = 0x8000 0x6000; /* 1536 MB */ }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = regulator-fixed; + regulator-name = mmc2_3v3; + regulator-min-microvolt = 330; + regulator-max-microvolt = 330; + }; }; dra7_pmx_core { @@ -257,3 +264,10 @@ vmmc-supply = ldo1_reg; bus-width = 4; }; + +mmc2 { + status = okay; + vmmc-supply = mmc2_3v3; + bus-width = 8; + ti,non-removable; Sekhar just posted a series to replace that with a non-TI attribute: non-removable. I'm not sure if this got merged, but it might be good to use the standard attribute instead. Regards, Benoit -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K balaj...@ti.com --- arch/arm/boot/dts/dra7-evm.dts | 14 ++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a59bbd0..2062724 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -17,6 +17,13 @@ device_type = memory; reg = 0x8000 0x6000; /* 1536 MB */ }; + + mmc2_3v3: fixedregulator-mmc2 { + compatible = regulator-fixed; + regulator-name = mmc2_3v3; + regulator-min-microvolt = 330; + regulator-max-microvolt = 330; + }; }; dra7_pmx_core { @@ -257,3 +264,10 @@ vmmc-supply = ldo1_reg; bus-width = 4; }; + +mmc2 { + status = okay; + vmmc-supply = mmc2_3v3; + bus-width = 8; + ti,non-removable; +}; -- 1.7.5.4 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html