Re: [PATCH v1] OMAP: GPIO: Correct IP version message during boot
Varadarajan, Charulatha ch...@ti.com writes: Kevin, On Thu, Dec 16, 2010 at 11:49, Kevin Hilman khil...@deeprootsystems.com wrote: Varadarajan, Charulatha ch...@ti.com writes: With the commit 9a748053f5f58a77cd71864f1d7b804175b0e47d whose subject is OMAP: GPIO: Make omap_gpio_show_rev bank specific (see [1]), the IP version information for all the banks are shown during bootup, but it does not show the bank number. Use dev_info instead of printk in omap_gpio_show_rev() so that the bank id is displayed along with the IP version [1] http://www.spinics.net/lists/arm-kernel/msg105872.html A related question, the commit above also changed the GPIO revision display from one-time to once per bank. Do we need to know the GPIO HW revision for each bank, or can we assume it's the same for all banks? The IP version is the same for all the gpio banks in all OMAP2+ CPUs. But I am not sure about OMAP16xx. OK, then I suggest we switch this back to just printing the GPIO revision once. Maybe after all banks are found, just print the revision for bank 1. Kevin -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v1] OMAP: GPIO: Correct IP version message during boot
Kevin, On Thu, Dec 16, 2010 at 11:49, Kevin Hilman khil...@deeprootsystems.com wrote: Varadarajan, Charulatha ch...@ti.com writes: With the commit 9a748053f5f58a77cd71864f1d7b804175b0e47d whose subject is OMAP: GPIO: Make omap_gpio_show_rev bank specific (see [1]), the IP version information for all the banks are shown during bootup, but it does not show the bank number. Use dev_info instead of printk in omap_gpio_show_rev() so that the bank id is displayed along with the IP version [1] http://www.spinics.net/lists/arm-kernel/msg105872.html A related question, the commit above also changed the GPIO revision display from one-time to once per bank. Do we need to know the GPIO HW revision for each bank, or can we assume it's the same for all banks? The IP version is the same for all the gpio banks in all OMAP2+ CPUs. But I am not sure about OMAP16xx. Kevin Signed-off-by: Varadarajan, Charulatha ch...@ti.com Acked-by: Felipe Balbi ba...@ti.com --- arch/arm/plat-omap/gpio.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8d493b9..47aeaeb 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1554,7 +1554,7 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) else return; - printk(KERN_INFO OMAP GPIO hardware version %d.%d\n, + dev_info(bank-dev, hardware version %d.%d\n, (rev 4) 0x0f, rev 0x0f); } -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v1] OMAP: GPIO: Correct IP version message during boot
With the commit 9a748053f5f58a77cd71864f1d7b804175b0e47d whose subject is OMAP: GPIO: Make omap_gpio_show_rev bank specific (see [1]), the IP version information for all the banks are shown during bootup, but it does not show the bank number. Use dev_info instead of printk in omap_gpio_show_rev() so that the bank id is displayed along with the IP version [1] http://www.spinics.net/lists/arm-kernel/msg105872.html Signed-off-by: Varadarajan, Charulatha ch...@ti.com Acked-by: Felipe Balbi ba...@ti.com --- arch/arm/plat-omap/gpio.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8d493b9..47aeaeb 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1554,7 +1554,7 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) else return; - printk(KERN_INFO OMAP GPIO hardware version %d.%d\n, + dev_info(bank-dev, hardware version %d.%d\n, (rev 4) 0x0f, rev 0x0f); } -- 1.7.1 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v1] OMAP: GPIO: Correct IP version message during boot
Varadarajan, Charulatha ch...@ti.com writes: With the commit 9a748053f5f58a77cd71864f1d7b804175b0e47d whose subject is OMAP: GPIO: Make omap_gpio_show_rev bank specific (see [1]), the IP version information for all the banks are shown during bootup, but it does not show the bank number. Use dev_info instead of printk in omap_gpio_show_rev() so that the bank id is displayed along with the IP version [1] http://www.spinics.net/lists/arm-kernel/msg105872.html A related question, the commit above also changed the GPIO revision display from one-time to once per bank. Do we need to know the GPIO HW revision for each bank, or can we assume it's the same for all banks? Kevin Signed-off-by: Varadarajan, Charulatha ch...@ti.com Acked-by: Felipe Balbi ba...@ti.com --- arch/arm/plat-omap/gpio.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8d493b9..47aeaeb 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1554,7 +1554,7 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) else return; - printk(KERN_INFO OMAP GPIO hardware version %d.%d\n, + dev_info(bank-dev, hardware version %d.%d\n, (rev 4) 0x0f, rev 0x0f); } -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html