Re: [PATCH v3] Add support for Newflow NanoBone board

2013-10-22 Thread Benoit Cousson 

Hi Mark,

On 04/10/2013 10:15, Mark Jackson wrote:

NanoBone Specification:
---
CPU:
   TI AM335x

Memory:
   256MB DDR3
   128MB NOR flash
   128KB FRAM

Ethernet:
   2 x 10/100 connected to SMSC LAN8710 PHY

USB:
   1 x USB2.0 Type A

I2C:
   2Kbit EEPROM (Microchip 24AA02)
   RTC (Maxim DS1338)
   GPIO Expander (Microchip MCP23017)

Expansion connector:
   6 x UART
   1 x MMC/SD
   1 x USB2.0

Signed-off-by: Mark Jackson m...@newflow.co.uk
Reviewed-by: Javier Martinez Canillas javier.marti...@collabora.co.uk


Thanks I've just applied it.

Regards,
Benoit


---
Changes in v3:
- Added MMC support
- Fixed regulator limits

Changes in v2:
- Reworked to use existing device nodes as suggested by Javier

  MAINTAINERS   |6 +
  arch/arm/boot/dts/Makefile|1 +
  arch/arm/boot/dts/am335x-nano.dts |  431 +
  3 files changed, 438 insertions(+)
  create mode 100644 arch/arm/boot/dts/am335x-nano.dts

diff --git a/MAINTAINERS b/MAINTAINERS
index e61c2e8..8a4c9d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6062,6 +6062,12 @@ L:   linux-omap@vger.kernel.org
  S:Maintained
  F:drivers/gpio/gpio-omap.c

+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M: Mark Jackson m...@newflow.co.uk
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/boot/dts/am335x-nano.dts
+
  OMFS FILESYSTEM
  M:Bob Copeland m...@bobcopeland.com
  L:linux-karma-de...@lists.sourceforge.net
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e95af3f..543e837 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am335x-evmsk.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+   am335x-nano.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
am43x-epos-evm.dtb
diff --git a/arch/arm/boot/dts/am335x-nano.dts 
b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 000..9907b49
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include am33xx.dtsi
+
+/ {
+   model = Newflow AM335x NanoBone;
+   compatible = ti,am33xx;
+
+   cpus {
+   cpu@0 {
+   cpu0-supply = dcdc2_reg;
+   };
+   };
+
+   memory {
+   device_type = memory;
+   reg = 0x8000 0x1000; /* 256 MB */
+   };
+
+   leds {
+   compatible = gpio-leds;
+
+   led@0 {
+   label = nanobone:green:usr1;
+   gpios = gpio1 5 0;
+   default-state = off;
+   };
+   };
+};
+
+am33xx_pinmux {
+   pinctrl-names = default;
+   pinctrl-0 = misc_pins;
+
+   misc_pins: misc_pins {
+   pinctrl-single,pins = 
+   0x15c (PIN_OUTPUT | MUX_MODE7)  /* spi0_cs0.gpio0_5 */
+   ;
+   };
+
+   gpmc_pins: gpmc_pins {
+   pinctrl-single,pins = 
+   0x0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad0.gpmc_ad0 */
+   0x4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad1.gpmc_ad1 */
+   0x8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad2.gpmc_ad2 */
+   0xc (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad3.gpmc_ad3 */
+   0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad4.gpmc_ad4 */
+   0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad5.gpmc_ad5 */
+   0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad6.gpmc_ad6 */
+   0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad7.gpmc_ad7 */
+   0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad8.gpmc_ad8 */
+   0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad9.gpmc_ad9 */
+   0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad10.gpmc_ad10 */
+   0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad11.gpmc_ad11 */
+   0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad12.gpmc_ad12 */
+   0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad13.gpmc_ad13 */
+   0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad14.gpmc_ad14 */
+   0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad15.gpmc_ad15 */
+
+   0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_wait0.gpmc_wait0 */
+   0x7c (PIN_OUTPUT | MUX_MODE0)   /* 
gpmc_csn0.gpmc_csn0 */
+   0x80

Re: [PATCH v3] Add support for Newflow NanoBone board

2013-10-04 Thread Mark Jackson 
On 25/09/13 09:04, Mark Jackson wrote:
 NanoBone Specification:
 ---
 CPU:
   TI AM335x
 
 Memory:
   256MB DDR3
   128MB NOR flash
   128KB FRAM
 
 Ethernet:
   2 x 10/100 connected to SMSC LAN8710 PHY
 
 USB:
   1 x USB2.0 Type A
 
 I2C:
   2Kbit EEPROM (Microchip 24AA02)
   RTC (Maxim DS1338)
   GPIO Expander (Microchip MCP23017)
 
 Expansion connector:
   6 x UART
   1 x MMC/SD
   1 x USB2.0
 
 Signed-off-by: Mark Jackson m...@newflow.co.uk
 Reviewed-by: Javier Martinez Canillas javier.marti...@collabora.co.uk

snip

Any chance someone could accept / comment on this patch ?

Cheers
Mark J.
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3] Add support for Newflow NanoBone board

2013-10-04 Thread Mark Jackson 
NanoBone Specification:
---
CPU:
  TI AM335x

Memory:
  256MB DDR3
  128MB NOR flash
  128KB FRAM

Ethernet:
  2 x 10/100 connected to SMSC LAN8710 PHY

USB:
  1 x USB2.0 Type A

I2C:
  2Kbit EEPROM (Microchip 24AA02)
  RTC (Maxim DS1338)
  GPIO Expander (Microchip MCP23017)

Expansion connector:
  6 x UART
  1 x MMC/SD
  1 x USB2.0

Signed-off-by: Mark Jackson m...@newflow.co.uk
Reviewed-by: Javier Martinez Canillas javier.marti...@collabora.co.uk
---
Changes in v3:
- Added MMC support
- Fixed regulator limits

Changes in v2:
- Reworked to use existing device nodes as suggested by Javier

 MAINTAINERS   |6 +
 arch/arm/boot/dts/Makefile|1 +
 arch/arm/boot/dts/am335x-nano.dts |  431 +
 3 files changed, 438 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-nano.dts

diff --git a/MAINTAINERS b/MAINTAINERS
index e61c2e8..8a4c9d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6062,6 +6062,12 @@ L:   linux-omap@vger.kernel.org
 S: Maintained
 F: drivers/gpio/gpio-omap.c
 
+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M: Mark Jackson m...@newflow.co.uk
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/boot/dts/am335x-nano.dts
+
 OMFS FILESYSTEM
 M: Bob Copeland m...@bobcopeland.com
 L: linux-karma-de...@lists.sourceforge.net
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e95af3f..543e837 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am335x-evmsk.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+   am335x-nano.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
am43x-epos-evm.dtb
diff --git a/arch/arm/boot/dts/am335x-nano.dts 
b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 000..9907b49
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include am33xx.dtsi
+
+/ {
+   model = Newflow AM335x NanoBone;
+   compatible = ti,am33xx;
+
+   cpus {
+   cpu@0 {
+   cpu0-supply = dcdc2_reg;
+   };
+   };
+
+   memory {
+   device_type = memory;
+   reg = 0x8000 0x1000; /* 256 MB */
+   };
+
+   leds {
+   compatible = gpio-leds;
+
+   led@0 {
+   label = nanobone:green:usr1;
+   gpios = gpio1 5 0;
+   default-state = off;
+   };
+   };
+};
+
+am33xx_pinmux {
+   pinctrl-names = default;
+   pinctrl-0 = misc_pins;
+
+   misc_pins: misc_pins {
+   pinctrl-single,pins = 
+   0x15c (PIN_OUTPUT | MUX_MODE7)  /* spi0_cs0.gpio0_5 */
+   ;
+   };
+
+   gpmc_pins: gpmc_pins {
+   pinctrl-single,pins = 
+   0x0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad0.gpmc_ad0 */
+   0x4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad1.gpmc_ad1 */
+   0x8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad2.gpmc_ad2 */
+   0xc (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad3.gpmc_ad3 */
+   0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad4.gpmc_ad4 */
+   0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad5.gpmc_ad5 */
+   0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad6.gpmc_ad6 */
+   0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad7.gpmc_ad7 */
+   0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad8.gpmc_ad8 */
+   0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad9.gpmc_ad9 */
+   0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad10.gpmc_ad10 */
+   0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad11.gpmc_ad11 */
+   0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad12.gpmc_ad12 */
+   0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad13.gpmc_ad13 */
+   0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad14.gpmc_ad14 */
+   0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad15.gpmc_ad15 */
+
+   0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_wait0.gpmc_wait0 */
+   0x7c (PIN_OUTPUT | MUX_MODE0)   /* 
gpmc_csn0.gpmc_csn0 */
+   0x80 (PIN_OUTPUT | MUX_MODE0)   /* 
gpmc_csn1.gpmc_csn1 */
+   0x84 (PIN_OUTPUT | MUX_MODE0)

[PATCH v3] Add support for Newflow NanoBone board

2013-09-25 Thread Mark Jackson 
NanoBone Specification:
---
CPU:
  TI AM335x

Memory:
  256MB DDR3
  128MB NOR flash
  128KB FRAM

Ethernet:
  2 x 10/100 connected to SMSC LAN8710 PHY

USB:
  1 x USB2.0 Type A

I2C:
  2Kbit EEPROM (Microchip 24AA02)
  RTC (Maxim DS1338)
  GPIO Expander (Microchip MCP23017)

Expansion connector:
  6 x UART
  1 x MMC/SD
  1 x USB2.0

Signed-off-by: Mark Jackson m...@newflow.co.uk
Reviewed-by: Javier Martinez Canillas javier.marti...@collabora.co.uk
---
Changes in v3:
- Added MMC support
- Fixed regulator limits

Changes in v2:
- Reworked to use existing device nodes as suggested by Javier

 MAINTAINERS   |6 +
 arch/arm/boot/dts/Makefile|1 +
 arch/arm/boot/dts/am335x-nano.dts |  431 +
 3 files changed, 438 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-nano.dts

diff --git a/MAINTAINERS b/MAINTAINERS
index e61c2e8..8a4c9d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6062,6 +6062,12 @@ L:   linux-omap@vger.kernel.org
 S: Maintained
 F: drivers/gpio/gpio-omap.c
 
+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M: Mark Jackson m...@newflow.co.uk
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/boot/dts/am335x-nano.dts
+
 OMFS FILESYSTEM
 M: Bob Copeland m...@bobcopeland.com
 L: linux-karma-de...@lists.sourceforge.net
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e95af3f..543e837 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am335x-evmsk.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+   am335x-nano.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
am43x-epos-evm.dtb
diff --git a/arch/arm/boot/dts/am335x-nano.dts 
b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 000..9907b49
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include am33xx.dtsi
+
+/ {
+   model = Newflow AM335x NanoBone;
+   compatible = ti,am33xx;
+
+   cpus {
+   cpu@0 {
+   cpu0-supply = dcdc2_reg;
+   };
+   };
+
+   memory {
+   device_type = memory;
+   reg = 0x8000 0x1000; /* 256 MB */
+   };
+
+   leds {
+   compatible = gpio-leds;
+
+   led@0 {
+   label = nanobone:green:usr1;
+   gpios = gpio1 5 0;
+   default-state = off;
+   };
+   };
+};
+
+am33xx_pinmux {
+   pinctrl-names = default;
+   pinctrl-0 = misc_pins;
+
+   misc_pins: misc_pins {
+   pinctrl-single,pins = 
+   0x15c (PIN_OUTPUT | MUX_MODE7)  /* spi0_cs0.gpio0_5 */
+   ;
+   };
+
+   gpmc_pins: gpmc_pins {
+   pinctrl-single,pins = 
+   0x0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad0.gpmc_ad0 */
+   0x4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad1.gpmc_ad1 */
+   0x8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad2.gpmc_ad2 */
+   0xc (PIN_INPUT_PULLUP | MUX_MODE0)  /* 
gpmc_ad3.gpmc_ad3 */
+   0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad4.gpmc_ad4 */
+   0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad5.gpmc_ad5 */
+   0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad6.gpmc_ad6 */
+   0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad7.gpmc_ad7 */
+   0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad8.gpmc_ad8 */
+   0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad9.gpmc_ad9 */
+   0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad10.gpmc_ad10 */
+   0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad11.gpmc_ad11 */
+   0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad12.gpmc_ad12 */
+   0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad13.gpmc_ad13 */
+   0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad14.gpmc_ad14 */
+   0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_ad15.gpmc_ad15 */
+
+   0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
gpmc_wait0.gpmc_wait0 */
+   0x7c (PIN_OUTPUT | MUX_MODE0)   /* 
gpmc_csn0.gpmc_csn0 */
+   0x80 (PIN_OUTPUT | MUX_MODE0)   /* 
gpmc_csn1.gpmc_csn1 */
+   0x84 (PIN_OUTPUT | MUX_MODE0)