Re: [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support
On Sun, Oct 28, 2012 at 04:41:24PM +0530, Sekhar Nori wrote: On 10/18/2012 6:56 PM, Matt Porter wrote: Adds support for the per-EDMA channel event mux. This is required for any peripherals using DMA crossbar mapped events. Signed-off-by: Matt Porter mpor...@ti.com --- arch/arm/common/edma.c | 63 +++- include/linux/platform_data/edma.h |1 + 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 6d2a590..b761b7a 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1425,6 +1425,53 @@ static int edma_of_read_u32_to_s16_array(const struct device_node *np, return 0; } +static int edma_xbar_event_map(struct device *dev, + struct device_node *node, + struct edma_soc_info *pdata, int len) +{ + int ret = 0; + int i; + struct resource res; + void *xbar; + s16 (*xbar_chans)[2]; + u32 shift, offset, mux; + + xbar_chans = devm_kzalloc(dev, + len/sizeof(s16) + 2*sizeof(s16), + GFP_KERNEL); + if (!xbar_chans) + return -ENOMEM; + + ret = of_address_to_resource(node, 1, res); + if (IS_ERR_VALUE(ret)) + return -EIO; + + xbar = devm_ioremap(dev, res.start, resource_size(res)); + if (!xbar) + return -EIO; -ENOMEM is more appropiate for ioremap failures. Fixed in v4. + + ret = edma_of_read_u32_to_s16_array(node, + ti,edma-xbar-event-map, + (s16 *)xbar_chans, + len/sizeof(u32)); + if (IS_ERR_VALUE(ret)) + return -EIO; + + for (i = 0; xbar_chans[i][0] != -1; i++) { + shift = (xbar_chans[i][1] % 4) * 8; + offset = xbar_chans[i][1] 2; + offset = 2; + mux = __raw_readl((void *)((u32)xbar + offset)); Dont use __raw* variants of io accessors. There will be ordering issues on ARMv7. Fixed in v4. + mux = (~(0xff shift)); + mux |= (xbar_chans[i][0] shift); Unnecessary parens above. Fixed in v4. + __raw_writel(mux, (void *)((u32)xbar + offset)); + } + + pdata-xbar_chans = xbar_chans; + + return 0; +} + static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) @@ -1453,7 +1500,6 @@ static int edma_of_parse_dt(struct device *dev, pdata-n_slot = value; pdata-n_cc = 1; - /* This is unused */ The comment should have not been part of 4/16? Correct. I moved the change to the correct patch in v4. Thanks, Sekhar ___ Davinci-linux-open-source mailing list davinci-linux-open-sou...@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support
On 10/18/2012 6:56 PM, Matt Porter wrote: Adds support for the per-EDMA channel event mux. This is required for any peripherals using DMA crossbar mapped events. Signed-off-by: Matt Porter mpor...@ti.com --- arch/arm/common/edma.c | 63 +++- include/linux/platform_data/edma.h |1 + 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 6d2a590..b761b7a 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1425,6 +1425,53 @@ static int edma_of_read_u32_to_s16_array(const struct device_node *np, return 0; } +static int edma_xbar_event_map(struct device *dev, +struct device_node *node, +struct edma_soc_info *pdata, int len) +{ + int ret = 0; + int i; + struct resource res; + void *xbar; + s16 (*xbar_chans)[2]; + u32 shift, offset, mux; + + xbar_chans = devm_kzalloc(dev, + len/sizeof(s16) + 2*sizeof(s16), + GFP_KERNEL); + if (!xbar_chans) + return -ENOMEM; + + ret = of_address_to_resource(node, 1, res); + if (IS_ERR_VALUE(ret)) + return -EIO; + + xbar = devm_ioremap(dev, res.start, resource_size(res)); + if (!xbar) + return -EIO; -ENOMEM is more appropiate for ioremap failures. + + ret = edma_of_read_u32_to_s16_array(node, + ti,edma-xbar-event-map, + (s16 *)xbar_chans, + len/sizeof(u32)); + if (IS_ERR_VALUE(ret)) + return -EIO; + + for (i = 0; xbar_chans[i][0] != -1; i++) { + shift = (xbar_chans[i][1] % 4) * 8; + offset = xbar_chans[i][1] 2; + offset = 2; + mux = __raw_readl((void *)((u32)xbar + offset)); Dont use __raw* variants of io accessors. There will be ordering issues on ARMv7. + mux = (~(0xff shift)); + mux |= (xbar_chans[i][0] shift); Unnecessary parens above. + __raw_writel(mux, (void *)((u32)xbar + offset)); + } + + pdata-xbar_chans = xbar_chans; + + return 0; +} + static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) @@ -1453,7 +1500,6 @@ static int edma_of_parse_dt(struct device *dev, pdata-n_slot = value; pdata-n_cc = 1; - /* This is unused */ The comment should have not been part of 4/16? Thanks, Sekhar -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support
On Thu, Oct 18, 2012 at 18:56:44, Porter, Matt wrote: Adds support for the per-EDMA channel event mux. This is required for any peripherals using DMA crossbar mapped events. Signed-off-by: Matt Porter mpor...@ti.com --- arch/arm/common/edma.c | 63 +++- include/linux/platform_data/edma.h |1 + 2 files changed, 63 insertions(+), 1 deletion(-) ..snip.. ..snip.. + + for (i = 0; xbar_chans[i][0] != -1; i++) { + shift = (xbar_chans[i][1] % 4) * 8; + offset = xbar_chans[i][1] 2; + offset = 2; + mux = __raw_readl((void *)((u32)xbar + offset)); + mux = (~(0xff shift)); + mux |= (xbar_chans[i][0] shift); + __raw_writel(mux, (void *)((u32)xbar + offset)); This method of calculating Xbar Channel offset has a bug that the code breaks with unaligned access trap error when requested channel to be mapped is odd. This was fixed in Arago tree [1]. Kindly verify + } + + pdata-xbar_chans = xbar_chans; + + return 0; +} + ..snip.. ..snip.. [1] http://arago-project.org/git/projects/?p=linux-am33x.git;a=commitdiff; h=c08d3cb557adf71c79aeefb3395455824e83 Regards, Gururaja -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support
Adds support for the per-EDMA channel event mux. This is required for any peripherals using DMA crossbar mapped events. Signed-off-by: Matt Porter mpor...@ti.com --- arch/arm/common/edma.c | 63 +++- include/linux/platform_data/edma.h |1 + 2 files changed, 63 insertions(+), 1 deletion(-) diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 6d2a590..b761b7a 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1425,6 +1425,53 @@ static int edma_of_read_u32_to_s16_array(const struct device_node *np, return 0; } +static int edma_xbar_event_map(struct device *dev, + struct device_node *node, + struct edma_soc_info *pdata, int len) +{ + int ret = 0; + int i; + struct resource res; + void *xbar; + s16 (*xbar_chans)[2]; + u32 shift, offset, mux; + + xbar_chans = devm_kzalloc(dev, + len/sizeof(s16) + 2*sizeof(s16), + GFP_KERNEL); + if (!xbar_chans) + return -ENOMEM; + + ret = of_address_to_resource(node, 1, res); + if (IS_ERR_VALUE(ret)) + return -EIO; + + xbar = devm_ioremap(dev, res.start, resource_size(res)); + if (!xbar) + return -EIO; + + ret = edma_of_read_u32_to_s16_array(node, + ti,edma-xbar-event-map, + (s16 *)xbar_chans, + len/sizeof(u32)); + if (IS_ERR_VALUE(ret)) + return -EIO; + + for (i = 0; xbar_chans[i][0] != -1; i++) { + shift = (xbar_chans[i][1] % 4) * 8; + offset = xbar_chans[i][1] 2; + offset = 2; + mux = __raw_readl((void *)((u32)xbar + offset)); + mux = (~(0xff shift)); + mux |= (xbar_chans[i][0] shift); + __raw_writel(mux, (void *)((u32)xbar + offset)); + } + + pdata-xbar_chans = xbar_chans; + + return 0; +} + static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) @@ -1453,7 +1500,6 @@ static int edma_of_parse_dt(struct device *dev, pdata-n_slot = value; pdata-n_cc = 1; - /* This is unused */ pdata-n_tc = 3; rsv_info = @@ -1538,6 +1584,10 @@ static int edma_of_parse_dt(struct device *dev, return ret; pdata-default_queue = value; + prop = of_find_property(node, ti,edma-xbar-event-map, sz); + if (prop) + ret = edma_xbar_event_map(dev, node, pdata, sz); + return ret; } @@ -1554,6 +1604,7 @@ static int __init edma_probe(struct platform_device *pdev) int status = -1; s16 (*rsv_chans)[2]; s16 (*rsv_slots)[2]; + s16 (*xbar_chans)[2]; int irq[EDMA_MAX_CC] = {0, 0}; int err_irq[EDMA_MAX_CC] = {0, 0}; struct resource *r[EDMA_MAX_CC] = {NULL, NULL}; @@ -1678,6 +1729,16 @@ static int __init edma_probe(struct platform_device *pdev) } } + /* Clear the xbar mapped channels in unused list */ + xbar_chans = info[j]-xbar_chans; + if (xbar_chans) { + for (i = 0; xbar_chans[i][1] != -1; i++) { + off = xbar_chans[i][1]; + clear_bits(off, 1, + edma_cc[j]-edma_unused); + } + } + if (node) irq[j] = irq_of_parse_and_map(node, 0); else { diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index b20b586..888a3c6 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -191,6 +191,7 @@ struct edma_soc_info { /* Resource reservation for other cores */ struct edma_rsv_info*rsv; + s16 (*xbar_chans)[2]; s8 (*queue_tc_mapping)[2]; s8 (*queue_priority_mapping)[2]; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html