From: David Brownell <[EMAIL PROTECTED]>
Convert the hsmmc init code over to standard GPIO calls:
gpio_request(), gpio_free(), gpio_get_value_cansleep().
NOTE that this doesn't pass GPIO numbers in to hsmmc_init();
those values are still hard-wired. (For the write protect
signal, the LACK of value is hard-wired...) So the hsmmc
glue is still kind of problematic.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/hsmmc.c | 25 ++++++++++++-------------
drivers/gpio/twl4030-gpio.c | 28 +---------------------------
include/linux/i2c/twl4030.h | 4 ----
3 files changed, 13 insertions(+), 44 deletions(-)
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -15,7 +15,9 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
+
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/board.h>
@@ -32,8 +34,6 @@
#define LDO_CLR 0x00
#define VSEL_S2_CLR 0x40
#define GPIO_0_BIT_POS (1 << 0)
-#define MMC1_CD_IRQ 0
-#define MMC2_CD_IRQ 1
#define OMAP2_CONTROL_DEVCONF0 0x48002274
#define OMAP2_CONTROL_DEVCONF1 0x490022E8
@@ -45,9 +45,12 @@
#define OMAP2_CONTROL_PBIAS_PWRDNZ (1 << 1)
#define OMAP2_CONTROL_PBIAS_SCTRL (1 << 2)
+
+static const int mmc1_cd_gpio = OMAP_MAX_GPIO_LINES; /* HACK!! */
+
static int hsmmc_card_detect(int irq)
{
- return twl4030_get_gpio_datain(irq - TWL4030_GPIO_IRQ_BASE);
+ return gpio_get_value_cansleep(mmc1_cd_gpio);
}
/*
@@ -60,11 +63,11 @@ static int hsmmc_late_init(struct device
/*
* Configure TWL4030 GPIO parameters for MMC hotplug irq
*/
- ret = twl4030_request_gpio(MMC1_CD_IRQ);
+ ret = gpio_request(mmc1_cd_gpio, "mmc0_cd");
if (ret)
goto err;
- ret = twl4030_set_gpio_debounce(MMC1_CD_IRQ, TWL4030_GPIO_IS_ENABLE);
+ ret = twl4030_set_gpio_debounce(0, true);
if (ret)
goto err;
@@ -77,11 +80,7 @@ err:
static void hsmmc_cleanup(struct device *dev)
{
- int ret = 0;
-
- ret = twl4030_free_gpio(MMC1_CD_IRQ);
- if (ret)
- dev_err(dev, "Failed to configure TWL4030 GPIO IRQ\n");
+ gpio_free(mmc1_cd_gpio);
}
#ifdef CONFIG_PM
@@ -123,7 +122,7 @@ static int hsmmc_suspend(struct device *
{
int ret = 0;
- disable_irq(TWL4030_GPIO_IRQ_NO(MMC1_CD_IRQ));
+ disable_irq(TWL4030_GPIO_IRQ_NO(0));
ret = mask_cd_interrupt(1);
return ret;
@@ -133,7 +132,7 @@ static int hsmmc_resume(struct device *d
{
int ret = 0;
- enable_irq(TWL4030_GPIO_IRQ_NO(MMC1_CD_IRQ));
+ enable_irq(TWL4030_GPIO_IRQ_NO(0));
ret = mask_cd_interrupt(0);
return ret;
@@ -260,7 +259,7 @@ static struct omap_mmc_platform_data mmc
MMC_VDD_165_195,
.name = "first slot",
- .card_detect_irq = TWL4030_GPIO_IRQ_NO(MMC1_CD_IRQ),
+ .card_detect_irq = TWL4030_GPIO_IRQ_NO(0),
.card_detect = hsmmc_card_detect,
},
};
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -97,31 +97,6 @@ static inline int gpio_twl4030_read(u8 a
return (ret < 0) ? ret : data;
}
-/*
- * twl4030 GPIO request function
- */
-int twl4030_request_gpio(int gpio)
-{
- if (unlikely(gpio >= TWL4030_GPIO_MAX))
- return -EPERM;
-
- return gpio_request(twl_gpiochip.base + gpio, NULL);
-}
-EXPORT_SYMBOL(twl4030_request_gpio);
-
-/*
- * TWL4030 GPIO free module
- */
-int twl4030_free_gpio(int gpio)
-{
- if (unlikely(gpio >= TWL4030_GPIO_MAX))
- return -EPERM;
-
- gpio_free(twl_gpiochip.base + gpio);
- return 0;
-}
-EXPORT_SYMBOL(twl4030_free_gpio);
-
static int twl4030_set_gpio_direction(int gpio, int is_input)
{
u8 d_bnk = gpio >> 3;
@@ -158,7 +133,7 @@ static int twl4030_set_gpio_dataout(int
return gpio_twl4030_write(base, d_msk);
}
-int twl4030_get_gpio_datain(int gpio)
+static int twl4030_get_gpio_datain(int gpio)
{
u8 d_bnk = gpio >> 3;
u8 d_off = gpio & 0x7;
@@ -176,7 +151,6 @@ int twl4030_get_gpio_datain(int gpio)
return ret;
}
-EXPORT_SYMBOL(twl4030_get_gpio_datain);
/*
* Configure debounce timing value for a GPIO pin on TWL4030
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -319,17 +319,13 @@ int twl4030_sih_setup(int module);
/* TWL4030 GPIO interrupt definitions */
#define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n))
-#define TWL4030_GPIO_IS_ENABLE 1
/*
* Exported TWL4030 GPIO APIs
*
* WARNING -- use standard GPIO and IRQ calls instead; these will vanish.
*/
-int twl4030_get_gpio_datain(int gpio);
-int twl4030_request_gpio(int gpio);
int twl4030_set_gpio_debounce(int gpio, int enable);
-int twl4030_free_gpio(int gpio);
#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
