On Mon, 26 Nov 2018 at 18:03, Niklas Söderlund
wrote:
>
> Hi,
>
> While looking at the Renesas BSP kernel I found patches which improves
> the state of the hardware at probe and after runtime resume.
>
> Patch 1/3 make sure the module clock is enabled after resuming before
> register are accessed. Patch 2/3 is the real change in this series and
> brings in reset of the vendor specific callback when resetting (SCC in
> the Renesas case). While 3/3 simply make sure that the IRQ mask for
> Renesas boards (Gen2 and later) are in a good shape after probe (and
> reset).
>
> In addition to addressing the state after resuming it helped unbreak a
> SD card I have which are very problematic on Koelsch. Without this
> series inserting the card results in:
>
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> sh_mobile_sdhi ee10.sd: Tuning procedure failed
> mmc0: tuning execution failed: -5
> mmc0: error -5 whilst initialising SD card
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
>
> While with this series applied (patch 2/3):
>
> sh_mobile_sdhi ee10.sd: timeout waiting for hardware interrupt (CMD19)
> mmc0: new ultra high speed SDR50 SDHC card at address
> mmcblk0: mmc0: SU04G 3.69 GiB
> mmcblk0: p1 p2
>
> Patch 1/3 was previously part of 2/3 but as it deals with a unrelated
> issue it's here broken out to a separate patch. Patch 3/3 have once been
> posted outside this series bit after comments from Wolfram it's brought
> back as it now deepens on 2/3.
>
> Most changes in this series are based on similar work from Masaharu
> Hayakawa but for this version all changes now differ quiet a lot from
> his work. All mails sent to him bounce with a "Undelivered Mail
> Returned to Sender" error. I therefor felt the need to claim authorship
> as I don't want to post blame of my (potential) mistakes on some else.
>
> Niklas Söderlund (3):
> mmc: tmio: enable module clock before resetting when resuming
> mmc: tmio: fix reset operation
> mmc: renesas_sdhi: add initial setting of interrupt mask register
>
> drivers/mmc/host/renesas_sdhi_core.c | 4
> drivers/mmc/host/tmio_mmc.h | 1 +
> drivers/mmc/host/tmio_mmc_core.c | 27 +++
> 3 files changed, 20 insertions(+), 12 deletions(-)
>
> --
> 2.19.1
>
Applied for next, thanks!
Kind regards
Uffe