Re: [PATCH v12 16/18] drm: bridge: analogix/dp: expand the wait time for looking AUX CH reply flag
Hi Jingoo,
Okay, fine, I would drop this patch, until I found the the root cause.
- Yakir
On 12/23/2015 11:10 PM, Jingoo Han wrote:
On Wednesday, December 23, 2015 9:51 PM, Yakir Yang wrote:
On Rockchip platform, sometimes driver would failed at reading EDID
message, and it's caused by the AUX reply flag wouldn't received under
the 100*10us wait time.
The problem is specific for Rockchip platform.
Also, 1 ms is long time.
The best way is that your hardware engineers find the root cause.
I cannot understand why your engineers cannot find the root cause. :-(
But after expand the wait time a little, the AUX reply flag would be
set, so maybe the wait time is a little critical. Besides the analogix
dp book haven't reminded the standard wait for looking AUX reply flag,
so I thought it's okay to expand the wait time.
And the external wait time won't hurt Exynos DP too much, cause they
wouldn't meet this problem, then driver would received the reply command
very soon, so no more additional wait time would bring to Exynos platform.
Then, when loop time happens on Exynos platform, it will take long time
to return error.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v12:
- Using another way to expand the AUX reply wait time (Jingoo)
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index cba3ffd..8687eea 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -471,7 +471,7 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
{
int reg;
int retval = 0;
- int timeout_loop = 0;
+ unsigned long timeout;
/* Enable AUX CH operation */
reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
@@ -479,14 +479,12 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
/* Is AUX CH command reply received? */
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
- while (!(reg & RPLY_RECEIV)) {
- timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ timeout = jiffies + msecs_to_jiffies(5);
+ while ((readl(dp->reg_base + ANALOGIX_DP_INT_STA) & RPLY_RECEIV) == 0) {
+ if (time_after(jiffies, timeout)) {
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
Sorry, I don't like your patch.
The problem happens because of Rockchip platform.
So, you need to add workaround for only Rockchip platform.
Just add new DT property and new variable for the value for wait time.
When, the probe is called, new wait time value is read from Rockchip DT file.
Then, the new wait time value can be written to the new variable.
new DT property: wait-time-aux
new variable: wait_time_aux
If ( ) // New DT
wait_time_aux = New DT;
else
wait_time_aux = 10;
usleep_range(10, 11);
If there is NO new wait time value from DT file, the default value '10' is
used for sleep.
But, if there is new wait time value from DT file, new wait time value
can be used for sleep.
usleep_range(dp->wait_time_aux, dp->wait_time_aux + 1);
What I want to say is that there should be NO effect on Exynos platform,
because of the hardware bug of Rockchip platform.
Best regards,
Jingoo Han
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v12 0/18] Add Analogix Core Display Port Driver
suggest me that driver could use the "of_property_read_bool" to get backword timing values, but that interfacs would modify the original drm_display_mode timing directly (whether those properties exists or not). - Correct the misspell in commit message. (Krzysztof) - Remove the empty line at the end of document, and correct the endpoint numbers in the example DT node, and remove the regulator iomux setting in driver code while using the pinctl in devicetree instead. (Heiko) - Add device type declared, cause the previous "platform device type support (v4 11/16)" already merge into (v5 02/14). - Implement connector registration code. (Thierry) - Split binding doc's from driver changes. (Rob) - Add eDP hotplug pinctrl property. (Heiko) - Remove "reg" DT property, cause driver could poweron/poweroff phy via the exist "grf" syscon already. And rename the example DT node from "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) - Add deivce_node at the front of driver, update phy_ops type from "static struct" to "static const struct". And correct the input paramters of devm_phy_create() interfaces. (Heiko) - Split binding doc's from driver changes. (Rob) - Update the rockchip,grf explain in document, and correct the clock required elemets in document. (Rob & Heiko) Changes in v4: - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob) - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo) - Create a separate folder for analogix code in bridge/ (Archit) - Update commit message more readable. (Jingoo) - Adjust the order from 05 to 04 - Provide backword compatibility with samsung. (Krzysztof) - Split all DTS changes, and provide backward compatibility. Mark old properties as deprecated but still support them. (Krzysztof) - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob) - Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry) "analogix,color-space" & "analogix,color-depth" & "analogix,link-rate" & "analogix,lane-count"& "analogix,ycbcr-coeff" & "analogix,dynamic-range" & "vsync-active-high"& "hsync-active-high" & "interlaces" - Separate all DTS changes to a separate patch. (Krzysztof) - Remove some deprecated DT properties in rockchip dp document. - Add commit message, and remove the redundant rockchip_dp_phy_init() function, move those code to probe() method. And remove driver .owner number. (Kishon) - Seprate the link-rate and lane-count limit out with the device_type flag. (Thierry) - Take Jingoo suggest, add commit messages. - Call drm_panel_prepare() in .get_modes function, ensure panel should power on before driver try to read edid message. Changes in v3: - Move exynos's video_timing code to analogix_dp-exynos platform driver, add get_modes method to struct analogix_dp_plat_data. (Thierry) - Rename some "samsung*" dts propery to "analogix*". (Heiko) - The link_rate and lane_count shouldn't config to the DT property value directly, but we can take those as hardware limite. For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would like "link-rate = 0x0a" "lane-count = 4". (Thierry) - Dynamic parse video timing info from struct drm_display_mode and struct drm_display_info. (Thierry) - Add devicetree binding documents. (Heiko) - Remove sync pol & colorimetry properies from the new analogix dp driver devicetree binding. (Thierry) - Update the exist exynos dtsi file with the latest DP DT properies. - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform driver which name to "pclk". (Thierry & Heiko) - Add devicetree binding document. (Heiko) - Remove "rockchip,panel" DT property, take use of remote point to get panel node. (Heiko) - Add the new function point dp_platdata->get_modes() init. - Suggest, add rockchip dp phy driver, collect the phy clocks and power control. (Heiko) - Add "analogix,need-force-hpd" to indicate whether driver need foce hpd when hpd detect failed. - move dp hpd detect to connector detect function. - Add edid modes parse support Changes in v2: - Remove new copyright (Jingoo) - Fix compiled failed due to analogix_dp_device misspell - Improved commit message more readable, and avoid using some uncommon style like bellow: (Joe Preches) - retval = exynos_dp_read_bytes_from_i2c(... ...); + retval = + exynos_dp_read_bytes_from_i2c(..); - Get pane
[PATCH v12 02/18] drm: bridge: analogix/dp: fix some obvious code style
Fix some obvious alignment problems, like alignment and line
over 80 characters problems, make this easy to be maintained
later.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Jingoo Han <jingooh...@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12:
- Add the ack from Jingoo
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Resequence this patch after analogix_dp driver have been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
Changes in v4: None
Changes in v3: None
Changes in v2:
- Improved commit message more readable, and avoid using some
uncommon style like bellow: (Joe Preches)
- retval = exynos_dp_read_bytes_from_i2c(...
...);
+ retval =
+ exynos_dp_read_bytes_from_i2c(..);
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 129 ++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 72 ++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 124 ++--
3 files changed, 163 insertions(+), 162 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 3ac4f1d..915fb46 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -64,7 +64,7 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
while (analogix_dp_get_plug_in_status(dp) != 0) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
dev_err(dp->dev, "failed to get hpd plug status\n");
return -ETIMEDOUT;
}
@@ -101,8 +101,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- _block);
+ EDID_EXTENSION_FLAG,
+ _block);
if (retval)
return retval;
@@ -110,7 +110,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
I2C_EDID_DEVICE_ADDR,
+ retval = analogix_dp_read_bytes_from_i2c(dp,
+ I2C_EDID_DEVICE_ADDR,
EDID_HEADER_PATTERN,
EDID_BLOCK_LENGTH,
[EDID_HEADER_PATTERN]);
@@ -141,7 +142,7 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
}
analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- _vector);
+ _vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
analogix_dp_write_byte_to_dpcd(dp,
DP_TEST_EDID_CHECKSUM,
@@ -155,10 +156,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read EDID data */
retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- [EDID_HEADER_PATTERN]);
+ I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH, [EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -169,16 +168,13 @@ static int analogix_dp_read_edid(struct
analogix_dp_device *dp)
return -EIO;
}
- analogix_dp_read_byte_from_dpcd(dp,
- DP_TEST_REQUEST,
- _vector);
+ analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+
[PATCH v12 06/18] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver
After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.
Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Reviewed-by: Jingoo Han < jingooh...@gmail.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the misspell in commit message. (Krzysztof)
Changes in v4:
- Separate all DTS changes to a separate patch. (Krzysztof)
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/exynos5250-arndale.dts | 2 --
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 --
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +---
arch/arm/boot/dts/exynos5250-spring.dts | 4 +---
arch/arm/boot/dts/exynos5420-peach-pit.dts| 4 +---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 --
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +---
7 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..b1790cf 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -124,8 +124,6 @@
{
status = "okay";
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..f30c2db 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -80,8 +80,6 @@
{
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 5cb33ba..b96624b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -236,12 +236,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 7 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts
b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..91881d7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -74,12 +74,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
- samsung,hpd-gpio = < 0 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 0 GPIO_ACTIVE_HIGH>;
};
{
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 35cfb07..2f37c87 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -148,12 +148,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 6 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..f67344f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -93,8 +93,6 @@
pinctrl-names = "default&qu
[PATCH v12 03/18] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.
Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12:
- Remove the enum link_rate_type struct, using the marcos in drm_dp_helper.h
(Jingoo)
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04
Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
directly, but we can take those as hardware limite. For example, RK3288
only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
like "link-rate = 0x0a" "lane-count = 4". (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 14 +++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 7 +--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
3 files changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 915fb46..fac8ad4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -627,6 +627,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct
analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+* For DP rev.1.2, Maximum link rate of Main Link lanes
+* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, );
*bandwidth = data;
@@ -647,7 +649,7 @@ static void analogix_dp_get_max_rx_lane_count(struct
analogix_dp_device *dp,
static void analogix_dp_init_training(struct analogix_dp_device *dp,
enum link_lane_count_type max_lane,
- enum link_rate_type max_rate)
+ int max_rate)
{
/*
* MACRO_RST must be applied after the PLL_LOCK to avoid
@@ -659,11 +661,12 @@ static void analogix_dp_init_training(struct
analogix_dp_device *dp,
analogix_dp_get_max_rx_bandwidth(dp, >link_train.link_rate);
analogix_dp_get_max_rx_lane_count(dp, >link_train.lane_count);
- if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ if ((dp->link_train.link_rate != DP_LINK_BW_1_62) &&
+ (dp->link_train.link_rate != DP_LINK_BW_2_7) &&
+ (dp->link_train.link_rate != DP_LINK_BW_5_4)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
- dp->link_train.link_rate = LINK_RATE_1_62GBPS;
+ dp->link_train.link_rate = DP_LINK_BW_1_62;
}
if (dp->link_train.lane_count == 0) {
@@ -901,9 +904,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index f7dfc8e..911642e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -20,11 +20,6 @@
#define MAX_CR_LOOP5
#define MAX_EQ_LOOP5
-enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
-};
-
enum link_lane_count_type {
LANE_COUNT1 = 1,
LANE_COUNT2 = 2,
@@ -128,7 +123,7 @@ struct video_info {
enum color_coefficient ycbcr_coeff;
enum color_depth color_depth;
- enum link_rate_type link_rate;
+ int link_rate;
enum link_lane_count_type lane_count;
};
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index a388c0a..eb0b63c 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -855,7 +855,7 @@ void analogix_dp_set_link_bandwidth(struct
analogix_dp_devi
[PATCH v12 04/18] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
Changes in v6: None
Changes in v5:
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
to get the backword timing values. Krzysztof suggest me that driver could use
the "of_property_read_bool" to get backword timing values, but that interfacs
would modify the original drm_display_mode timing directly (whether those
properties exists or not).
Changes in v4:
- Provide backword compatibility with samsung. (Krzysztof)
Changes in v3:
- Dynamic parse video timing info from struct drm_display_mode and
struct drm_display_info. (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 148 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
3 files changed, 103 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index fac8ad4..27752df 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -893,8 +893,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
-dp->video_info->link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
+dp->video_info.link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1077,6 +1077,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *orig_mode,
+ struct drm_display_mode *mode)
+{
+ struct analogix_dp_device *dp = bridge->driver_private;
+ struct drm_display_info *display_info = >connector.display_info;
+ struct video_info *video = >video_info;
+ struct device_node *dp_node = dp->dev->of_node;
+ int vic;
+
+ /* Input video interlaces & hsync pol & vsync pol */
+ video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+ video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+ video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+ /* Input video dynamic_range & colorimetry */
+ vic = drm_match_cea_mode(mode);
+ if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+ (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR601;
+ } else if (vic) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ } else {
+ video->dynamic_range = VESA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ }
+
+ /* Input vide bpc and color_formats */
+ switch (display_info->bpc) {
+ case 12:
+ video->color_depth = COLOR_12;
+ break;
+ case 10:
+ video->color_depth = COLOR_10;
+ break;
+ case 8:
+ video->color_depth = COLOR_8;
+ break;
+ case 6:
+ video->color_depth = COLOR_6;
+ break;
+ default:
+ video->color_depth = COLOR_8;
+ break;
+ }
+ if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ video->color_space = COLOR_YCBCR444;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ video->color_space = COLOR_YCBCR422;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+ video->color_space = COLOR_RGB;
+ else
[PATCH v12 05/18] dt-bindings: add document for analogix display port driver
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
---
Changes in v12: None
Changes in v11: None
Changes in v10:
- Add the ack from Rob Herring
Changes in v9: None
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count"&
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high"& "hsync-active-high" & "interlaces"
Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 50 +
.../bindings/display/exynos/exynos_dp.txt | 65 --
2 files changed, 72 insertions(+), 43 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+* "samsung,exynos5-dp"
+* "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ *
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+---
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b 0x1>;
+ interrupts = <10 3>;
+ interrupt-parent = <>;
+ clocks = < 342>;
+ clock-names = "dp";
+
+ phys = <_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2..9905081 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
- -samsung,ycbcr-coeff:
-
[PATCH v12 07/18] drm: rockchip: dp: add rockchip platform dp driver
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10:
- Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here (Heiko)
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Remove the empty line at the end of document, and correct the endpoint
numbers in the example DT node, and remove the regulator iomux setting
in driver code while using the pinctl in devicetree instead. (Heiko)
- Add device type declared, cause the previous "platform device type
support (v4 11/16)" already merge into (v5 02/14).
- Implement connector registration code. (Thierry)
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.
Changes in v3:
- Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
and leave "sclk_edp" to analogix dp core driver which name to "dp",
and leave "pclk_edp" to rockchip dp platform driver which name to
"pclk". (Thierry & Heiko)
- Add devicetree binding document. (Heiko)
- Remove "rockchip,panel" DT property, take use of remote point to get panel
node. (Heiko)
- Add the new function point dp_platdata->get_modes() init.
Changes in v2:
- Get panel node with remote-endpoint method, and create devicetree binding
for driver. (Heiko)
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
drivers/gpu/drm/rockchip/Kconfig| 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 385
include/drm/bridge/analogix_dp.h| 1 +
4 files changed, 396 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..686cb49 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_ANALOGIX_DP
+ tristate "Rockchip specific extensions for Analogix DP driver"
+ depends on DRM_ROCKCHIP
+ select DRM_ANALOGIX_DP
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile
b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
new file mode 100644
index 000..9552273
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,385 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy@rock-chips.com>
+ * Yakir Yang <y...@rock-chips.com>
+ * Jeff Chen <jeff.c...@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
+
+/* dp grf register offset */
+#define GRF_SOC_CON60x025c
+#define GRF_EDP_LCD_SEL_MASKBIT(5)
+#define GRF_EDP_SEL_VOP_LIT BIT(5)
+#define GRF_EDP_SEL_VOP_BIG 0
+
+struct rockchip_dp_device {
+ struct drm_device*drm_dev;
+ struct device*dev;
+ struct drm_encoder encoder;
+ struct drm_display_mode mode;
+
+ struct clk *pclk;
+ struct regmap*grf;
+ struct reset_control
[PATCH v12 08/18] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v12: None
Changes in v11: None
Changes in v10:
- Add the ack from Rob Herring
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..04d99e3
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the output of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v12 09/18] phy: Add driver for rockchip Display Port PHY
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v12:
- Re-order the include headers file alphabetically in phy-rockchip-dp.c (Jingoo)
Changes in v11: None
Changes in v10:
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
BIT(4) -> BIT(20)
Changes in v9:
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.
Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
the exist "grf" syscon already. And rename the example DT node from
"edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
struct" to "static const struct". And correct the input paramters of
devm_phy_create() interfaces. (Heiko)
Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
function, move those code to probe() method. And remove driver .owner
number. (Kishon)
Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
power control. (Heiko)
Changes in v2: None
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 151 ++
3 files changed, 159 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-dp.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)+=
phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)+= phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)+= phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..88f09ec
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+ } else {
+ clk_disable_unprepare(dp->phy_24m);
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+
[PATCH v12 11/18] drm: bridge: analogix/dp: add some rk3288 special registers setting
RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix compile failed dut to phy_pd_addr variable misspell error
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 76 ++-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 12
2 files changed, 60 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 3858df5..1e24b37 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -15,6 +15,8 @@
#include
#include
+#include
+
#include "analogix_dp_core.h"
#include "analogix_dp_reg.h"
@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device
*dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+ writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+ writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+ writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+ writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+ writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+ }
+
reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct
analogix_dp_device *dp,
bool enable)
{
u32 reg;
+ u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH0_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH1_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH2_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY
[PATCH v12 12/18] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288
There are some IP limit on rk3288 that only support 4 physical lanes
of 2.7/1.6 Gbps/lane, so seprate them out by device_type flag.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10:
- Remove the surplus "plat_data" check. (Heiko)
- switch (dp->plat_data && dp->plat_data->dev_type) {
+ switch (dp->plat_data->dev_type) {
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Seprate the link-rate and lane-count limit out with the device_type
flag. (Thierry)
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 33 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 +--
2 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 27752df..7c5f1f7 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -893,8 +893,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
-dp->video_info.link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
+dp->video_info.max_link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1203,16 +1203,25 @@ static int analogix_dp_dt_parse_pdata(struct
analogix_dp_device *dp)
struct device_node *dp_node = dp->dev->of_node;
struct video_info *video_info = >video_info;
- if (of_property_read_u32(dp_node, "samsung,link-rate",
-_info->link_rate)) {
- dev_err(dp->dev, "failed to get link-rate\n");
- return -EINVAL;
- }
-
- if (of_property_read_u32(dp_node, "samsung,lane-count",
-_info->lane_count)) {
- dev_err(dp->dev, "failed to get lane-count\n");
- return -EINVAL;
+ switch (dp->plat_data->dev_type) {
+ case RK3288_DP:
+ /*
+* Like Rk3288 DisplayPort TRM indicate that "Main link
+* containing 4 physical lanes of 2.7/1.62 Gbps/lane".
+*/
+ video_info->max_link_rate = 0x0A;
+ video_info->max_lane_count = 0x04;
+ break;
+ case EXYNOS_DP:
+ /*
+* NOTE: those property parseing code is used for
+* providing backward compatibility for samsung platform.
+*/
+ of_property_read_u32(dp_node, "samsung,link-rate",
+_info->max_link_rate);
+ of_property_read_u32(dp_node, "samsung,lane-count",
+_info->max_lane_count);
+ break;
}
return 0;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index d488dd6..6cc53d4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -123,8 +123,8 @@ struct video_info {
enum color_coefficient ycbcr_coeff;
enum color_depth color_depth;
- int link_rate;
- enum link_lane_count_type lane_count;
+ int max_link_rate;
+ enum link_lane_count_type max_lane_count;
};
struct link_train {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v12 13/18] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12: None
Changes in v11:
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
- Add the ack from Rob Herring
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 35 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..4f2ba8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 04d99e3..e832ff9 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 7c5f1f7..0be1ac8 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -62,15 +62,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->force_hpd)
+ return -ETIMEDOUT;
+
+ /*
+* The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+*
[PATCH v12 14/18] drm: bridge: analogix/dp: move hpd detect to connector detect function
This change just make a little clean to make code more like
drm core expect, move hdp detect code from bridge->enable(),
and place them into connector->detect().
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now the connector status don't hardcode to connected,
need to operate dp phy in .detect function, so we need to revert
parts if Gustavo Padovan's changes, add phy poweron
function in bind time.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12: None
Changes in v11:
- Revert parts of Gustavo Padovan's changes in commit:
drm/exynos: do not start enabling DP at bind() phase
Add dp phy poweron function in bind time.
- Move the panel prepare from get_modes time to bind time, and move
the panel unprepare from bridge->disable to unbind time. (Heiko)
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Take Jingoo suggest, add commit messages.
Changes in v3:
- move dp hpd detect to connector detect function.
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 38 --
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 0be1ac8..1ff2d8ee 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -904,12 +904,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_detect_hpd(dp);
- if (ret) {
- /* Cable has been disconnected, we're done */
- return;
- }
-
ret = analogix_dp_handle_edid(dp);
if (ret) {
dev_err(dp->dev, "unable to handle edid\n");
@@ -972,6 +966,11 @@ static struct drm_connector_helper_funcs
analogix_dp_connector_helper_funcs = {
enum drm_connector_status
analogix_dp_detect(struct drm_connector *connector, bool force)
{
+ struct analogix_dp_device *dp = to_dp(connector);
+
+ if (analogix_dp_detect_hpd(dp))
+ return connector_status_disconnected;
+
return connector_status_connected;
}
@@ -1051,13 +1050,6 @@ static void analogix_dp_bridge_enable(struct drm_bridge
*bridge)
pm_runtime_get_sync(dp->dev);
- if (dp->plat_data->panel) {
- if (drm_panel_prepare(dp->plat_data->panel)) {
- DRM_ERROR("failed to setup the panel\n");
- return;
- }
- }
-
if (dp->plat_data->power_on)
dp->plat_data->power_on(dp->plat_data);
@@ -1090,11 +1082,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
- if (dp->plat_data->panel) {
- if (drm_panel_unprepare(dp->plat_data->panel))
- DRM_ERROR("failed to turnoff the panel\n");
- }
-
pm_runtime_put_sync(dp->dev);
dp->dpms_mode = DRM_MODE_DPMS_OFF;
@@ -1352,6 +1339,15 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
pm_runtime_enable(dev);
+ phy_power_on(dp->phy);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EBUSY;
+ }
+ }
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
@@ -1385,6 +1381,12 @@ void analogix_dp_unbind(struct device *dev, struct
device *master,
struct analogix_dp_device *dp = dev_get_drvdata(dev);
analogix_dp_bridge_disable(dp->bridge);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
+ DRM_ERROR("failed to turnoff the panel\n");
+ }
+
pm_runtime_disable(dev);
}
EXPORT_SYMBOL_GPL(analogix_dp_unbind);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v12 15/18] drm: bridge: analogix/dp: add edid modes parse in get_modes method
Display Port monitor could support kinds of mode which indicate
in monitor edid, not just one single display resolution which
defined in panel or devivetree property display timing.
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now driver need to read edid message in .get_modes()
function, so controller must be inited in bind time, so we
need to add controller init back.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Call drm_panel_prepare() in .get_modes function, ensure panel should
power on before driver try to read edid message.
Changes in v3:
- Add edid modes parse support
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 17
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 46 +++---
2 files changed, 33 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 1ff2d8ee..a86a283 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -110,7 +110,7 @@ static unsigned char
analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
static int analogix_dp_read_edid(struct analogix_dp_device *dp)
{
- unsigned char edid[EDID_BLOCK_LENGTH * 2];
+ unsigned char *edid = dp->edid;
unsigned int extend_block = 0;
unsigned char sum;
unsigned char test_vector;
@@ -904,12 +904,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_handle_edid(dp);
- if (ret) {
- dev_err(dp->dev, "unable to handle edid\n");
- return;
- }
-
ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
dp->video_info.max_link_rate);
if (ret) {
@@ -939,8 +933,14 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
int analogix_dp_get_modes(struct drm_connector *connector)
{
struct analogix_dp_device *dp = to_dp(connector);
+ struct edid *edid = (struct edid *)dp->edid;
int num_modes = 0;
+ if (analogix_dp_handle_edid(dp) == 0) {
+ drm_mode_connector_update_edid_property(>connector, edid);
+ num_modes += drm_add_edid_modes(>connector, edid);
+ }
+
if (dp->plat_data->panel)
num_modes += drm_panel_get_modes(dp->plat_data->panel);
@@ -978,6 +978,7 @@ static void analogix_dp_connector_destroy(struct
drm_connector *connector)
{
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
+
}
static struct drm_connector_funcs analogix_dp_connector_funcs = {
@@ -1348,6 +1349,8 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
}
}
+ analogix_dp_init_dp(dp);
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index a8cba64..40a0759 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -20,6 +20,28 @@
#define MAX_CR_LOOP5
#define MAX_EQ_LOOP5
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR 0x50
+#define I2C_E_EDID_DEVICE_ADDR 0x30
+
+#define EDID_BLOCK_LENGTH 0x80
+#define EDID_HEADER_PATTERN0x00
+#define EDID_EXTENSION_FLAG0x7e
+#define EDID_CHECKSUM 0x7f
+
+/* DP_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
+
+/* DP_LANE_COUNT_SET */
+#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
+
+/* DP_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
+#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
+
enum link_lane_count_type {
LANE_COUNT1 = 1,
LANE_COUNT2 = 2,
@@ -155,6 +177,7 @@ struct analogix
[PATCH v12 16/18] drm: bridge: analogix/dp: expand the wait time for looking AUX CH reply flag
On Rockchip platform, sometimes driver would failed at reading EDID
message, and it's caused by the AUX reply flag wouldn't received under
the 100*10us wait time.
But after expand the wait time a little, the AUX reply flag would be
set, so maybe the wait time is a little critical. Besides the analogix
dp book haven't reminded the standard wait for looking AUX reply flag,
so I thought it's okay to expand the wait time.
And the external wait time won't hurt Exynos DP too much, cause they
wouldn't meet this problem, then driver would received the reply command
very soon, so no more additional wait time would bring to Exynos platform.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v12:
- Using another way to expand the AUX reply wait time (Jingoo)
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index cba3ffd..8687eea 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -471,7 +471,7 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
{
int reg;
int retval = 0;
- int timeout_loop = 0;
+ unsigned long timeout;
/* Enable AUX CH operation */
reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
@@ -479,14 +479,12 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
/* Is AUX CH command reply received? */
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
- while (!(reg & RPLY_RECEIV)) {
- timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ timeout = jiffies + msecs_to_jiffies(5);
+ while ((readl(dp->reg_base + ANALOGIX_DP_INT_STA) & RPLY_RECEIV) == 0) {
+ if (time_after(jiffies, timeout)) {
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
usleep_range(10, 11);
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v12 17/18] drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time
Turn off the panel power in suspend time would help to reduce
power waste.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a86a283..1e98489 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1400,6 +1400,12 @@ int analogix_dp_suspend(struct device *dev)
struct analogix_dp_device *dp = dev_get_drvdata(dev);
clk_disable_unprepare(dp->clock);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
+ DRM_ERROR("failed to turnoff the panel\n");
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(analogix_dp_suspend);
@@ -1415,6 +1421,13 @@ int analogix_dp_resume(struct device *dev)
return ret;
}
+ if (dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EBUSY;
+ }
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(analogix_dp_resume);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v12 18/18] drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time
It may caused a dead lock if we flush the hpd work in bridge disable time.
The normal flow would like:
IN --> DRM IOCTL
1. Acquire crtc_ww_class_mutex (DRM IOCTL)
IN --> analogix_dp_bridge
2. Acquire hpd work lock (Flush hpd work)
3. HPD work already in idle, no need to run the work function.
OUT <-- analogix_dp_bridge
OUT <-- DRM IOCTL
The dead lock flow would like:
IN --> DRM IOCTL
1. Acquire crtc_ww_class_mutex (DRM IOCTL)
IN --> analogix_dp_bridge
2. Acquire hpd work lock (Flush hpd work)
IN --> analogix_dp_hotplug
IN --> drm_helper_hpd_irq_event
3. Acquire mode_config lock (This lock already have been acquired in
previous step 1)
** Dead Lock Now **
It's wrong to flush the hpd work in bridge->disable time, I guess the
original code just want to ensure the delay work must be finish before
encoder disabled.
The flush work in bridge disable time is try to ensure the HPD event
won't be missed before display card disabled, actually we can take a
fast respond way(interrupt thread) to update DRM HPD event to fix the
delay update and possible dead lock.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 62 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 26 +
3 files changed, 55 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 1e98489..04efed2 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -851,47 +851,40 @@ static void analogix_dp_enable_scramble(struct
analogix_dp_device *dp,
}
}
-static irqreturn_t analogix_dp_irq_handler(int irq, void *arg)
+static irqreturn_t analogix_dp_hardirq(int irq, void *arg)
{
struct analogix_dp_device *dp = arg;
-
+ irqreturn_t ret = IRQ_NONE;
enum dp_irq_type irq_type;
irq_type = analogix_dp_get_irq_type(dp);
- switch (irq_type) {
- case DP_IRQ_TYPE_HP_CABLE_IN:
- dev_dbg(dp->dev, "Received irq - cable in\n");
- schedule_work(>hotplug_work);
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- case DP_IRQ_TYPE_HP_CABLE_OUT:
- dev_dbg(dp->dev, "Received irq - cable out\n");
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- case DP_IRQ_TYPE_HP_CHANGE:
- /*
-* We get these change notifications once in a while, but there
-* is nothing we can do with them. Just ignore it for now and
-* only handle cable changes.
-*/
- dev_dbg(dp->dev, "Received irq - hotplug change; ignoring.\n");
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- default:
- dev_err(dp->dev, "Received irq - unknown type!\n");
- break;
+ if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+ analogix_dp_mute_hpd_interrupt(dp);
+ ret = IRQ_WAKE_THREAD;
}
- return IRQ_HANDLED;
+
+ return ret;
}
-static void analogix_dp_hotplug(struct work_struct *work)
+static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
{
- struct analogix_dp_device *dp;
+ struct analogix_dp_device *dp = arg;
+ enum dp_irq_type irq_type;
+
+ irq_type = analogix_dp_get_irq_type(dp);
+ if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN ||
+ irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) {
+ dev_dbg(dp->dev, "Detected cable status changed!\n");
+ if (dp->drm_dev)
+ drm_helper_hpd_irq_event(dp->drm_dev);
+ }
- dp = container_of(work, struct analogix_dp_device, hotplug_work);
+ if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+ analogix_dp_clear_hotplug_interrupts(dp);
+ analogix_dp_unmute_hpd_interrupt(dp);
+ }
- if (dp->drm_dev)
- drm_helper_hpd_irq_event(dp->drm_dev);
+ return IRQ_HANDLED;
}
static void analogix_dp_commit(struct analogix_dp_device *dp)
@@ -1077,7 +1070,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
}
disable_irq(dp->irq);
- flush_work(>hotplug_work);
phy_power_off(dp->phy);
if (dp->plat_data->power_off)
@@ -1336,8 +1328,6 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm
Re: [PATCH v11 03/19] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
Hi Jingoo,
Thanks for your respond.
On 12/22/2015 08:09 PM, Jingoo Han wrote:
On Wednesday, December 16, 2015 12:28 PM, Yakir Yang wrote:
link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.
Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04
Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
directly, but we can take those as hardware limite. For example, RK3288
only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
like "link-rate = 0x0a" "lane-count = 4". (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 4a05c2b..6f899cd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct
analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+* For DP rev.1.2, Maximum link rate of Main Link lanes
+* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, );
*bandwidth = data;
@@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct
analogix_dp_device *dp,
analogix_dp_get_max_rx_lane_count(dp, >link_train.lane_count);
if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
+ (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 8e84208..57aa4b0d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -21,8 +21,9 @@
#define MAX_EQ_LOOP 5
enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
+ LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
+ LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
+ LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
Then, how about removing 'enum link_rate_type'?
If DP_LINK_BW_* are used, LINK_RATE_* are not necessary.
Sure, good catch.
Thanks,
- Yakir
Best regards,
Jingoo Han
};
enum link_lane_count_type {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v11 02/19] drm: bridge: analogix/dp: fix some obvious code style
On 12/22/2015 08:05 PM, Jingoo Han wrote:
On Wednesday, December 16, 2015 12:26 PM, Yakir Yang wrote:
Fix some obvious alignment problems, like alignment and line
over 80 characters problems, make this easy to be maintained
later.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Acked-by: Jingoo Han <jingooh...@gmail.com>
Thanks,
- Yakir
Best regards,
Jingoo Han
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Resequence this patch after analogix_dp driver have been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
Changes in v4: None
Changes in v3: None
Changes in v2:
- Improved commit message more readable, and avoid using some
uncommon style like bellow: (Joe Preches)
- retval = exynos_dp_read_bytes_from_i2c(...
...);
+ retval =
+ exynos_dp_read_bytes_from_i2c(..);
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 129 ++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 72 ++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 124 ++--
3 files changed, 163 insertions(+), 162 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index fb8bda8..4a05c2b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -61,7 +61,7 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
while (analogix_dp_get_plug_in_status(dp) != 0) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
dev_err(dp->dev, "failed to get hpd plug status\n");
return -ETIMEDOUT;
}
@@ -98,8 +98,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- _block);
+ EDID_EXTENSION_FLAG,
+ _block);
if (retval)
return retval;
@@ -107,7 +107,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
I2C_EDID_DEVICE_ADDR,
+ retval = analogix_dp_read_bytes_from_i2c(dp,
+ I2C_EDID_DEVICE_ADDR,
EDID_HEADER_PATTERN,
EDID_BLOCK_LENGTH,
[EDID_HEADER_PATTERN]);
@@ -138,7 +139,7 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
}
analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- _vector);
+ _vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
analogix_dp_write_byte_to_dpcd(dp,
DP_TEST_EDID_CHECKSUM,
@@ -152,10 +153,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read EDID data */
retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- [EDID_HEADER_PATTERN]);
+ I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH, [EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -166,16 +165,13 @@ static int analogix_dp_read_edid(struct
analogix_dp_device *dp)
return -EIO;
}
- analogix_dp_read_byte_from_dpcd(dp,
- DP_TEST_REQUEST,
- _vec
Re: [PATCH v11 06/19] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver
On 12/22/2015 08:13 PM, Jingoo Han wrote:
On Wednesday, December 16, 2015 12:35 PM, Yakir Yang wrote:
After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.
Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Reviewed-by: Jingoo Han < jingooh...@gmail.com >
Thanks,
- Yakir
Best regards,
Jingoo Han
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the misspell in commit message. (Krzysztof)
Changes in v4:
- Separate all DTS changes to a separate patch. (Krzysztof)
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/exynos5250-arndale.dts | 2 --
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 --
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +---
arch/arm/boot/dts/exynos5250-spring.dts | 4 +---
arch/arm/boot/dts/exynos5420-peach-pit.dts| 4 +---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 --
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +---
7 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..b1790cf 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -124,8 +124,6 @@
{
status = "okay";
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..f30c2db 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -80,8 +80,6 @@
{
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
b/arch/arm/boot/dts/exynos5250-snow-
common.dtsi
index 5cb33ba..b96624b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -236,12 +236,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 7 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts
b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..91881d7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -74,12 +74,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
- samsung,hpd-gpio = < 0 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 0 GPIO_ACTIVE_HIGH>;
};
{
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 35cfb07..2f37c87 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -148,12 +148,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 6 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..f67344f 100644
--- a/
Re: [PATCH v11 09/19] phy: Add driver for rockchip Display Port PHY
Hi Jingoo,
Thanks for your respond.
On 12/22/2015 08:20 PM, Jingoo Han wrote:
On Wednesday, December 16, 2015 12:41 PM, Yakir Yang wrote:
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v11: None
Changes in v10:
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
BIT(4) -> BIT(20)
Changes in v9:
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.
Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
the exist "grf" syscon already. And rename the example DT node from
"edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
struct" to "static const struct". And correct the input paramters of
devm_phy_create() interfaces. (Heiko)
Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
function, move those code to probe() method. And remove driver .owner
number. (Kishon)
Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
power control. (Heiko)
Changes in v2: None
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 151 ++
3 files changed, 159 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-dp.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)+=
phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..3cb3bf8
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
Please order these headers alphabetically.
It will enhance the readability.
Done,
Thanks,
- Yakir
Best regards,
Jingoo Han
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret =
Re: [PATCH v11 17/19] drm: bridge: analogix/dp: expand the look time for waiting AUX CH reply
Hi Jingoo,
On 12/22/2015 08:26 PM, Jingoo Han wrote:
On Wednesday, December 16, 2015 12:58 PM, Yakir Yang wrote:
After test on rockchiop platform, i found sometims driver would failed
at reading EDID message. After debugging more, i found that it's okay
to read_a byte from i2c, but it would failed at AUX transcation if we
try to ready multi-bytes from i2c.
Driver just can't received the AUX CH reply command, even no AUX error
code. I may guess that the AUX wait time is not enough, so I try to
expand the AUX wait time, and i do see this could fix the EDID read
failed at rockchip platform.
And I thought that expand the wait time won't hurt Exynos platform too
much, cause Exynos didn't have this problem, then driver would received
the reply command very soon, so no more additional wait time would bring
to Exynos platform.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index c7e2959..dc376bd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -482,7 +482,7 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
while (!(reg & RPLY_RECEIV)) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (DP_TIMEOUT_LOOP_COUNT * 10 < timeout_loop) {
No, I hate this coding.
analogix_dp_reg.c is the common code that can be shared by various SoCs.
Please, find another way.
Okay, I have double checked that i do have this problem in my side.
Hmmm.
I thought it's okay for you if I expand the "DP_TIMEOUT_LOOP_COUNT"
directly,
it won't hurt Exynos platform too much, cause Exynos didn't have this
problem,
then driver would received,the reply command very soon, so no more
additional
wait time would bring to Exynos platform.
And actually the datasheet haven't described the spec of aux reply delay
time.
Thanks,
- Yakir
Best regards,
Jingoo Han
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v11 17/19] drm: bridge: analogix/dp: expand the look time for waiting AUX CH reply
Hi Jingoo,
On 12/23/2015 12:24 PM, Yakir Yang wrote:
Hi Jingoo,
On 12/22/2015 08:26 PM, Jingoo Han wrote:
On Wednesday, December 16, 2015 12:58 PM, Yakir Yang wrote:
After test on rockchiop platform, i found sometims driver would failed
at reading EDID message. After debugging more, i found that it's okay
to read_a byte from i2c, but it would failed at AUX transcation if we
try to ready multi-bytes from i2c.
Driver just can't received the AUX CH reply command, even no AUX error
code. I may guess that the AUX wait time is not enough, so I try to
expand the AUX wait time, and i do see this could fix the EDID read
failed at rockchip platform.
And I thought that expand the wait time won't hurt Exynos platform too
much, cause Exynos didn't have this problem, then driver would received
the reply command very soon, so no more additional wait time would
bring
to Exynos platform.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index c7e2959..dc376bd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -482,7 +482,7 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
while (!(reg & RPLY_RECEIV)) {
timeout_loop++;
-if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+if (DP_TIMEOUT_LOOP_COUNT * 10 < timeout_loop) {
No, I hate this coding.
analogix_dp_reg.c is the common code that can be shared by various SoCs.
Please, find another way.
Okay, I have double checked that i do have this problem in my side.
Hmmm.
I thought it's okay for you if I expand the "DP_TIMEOUT_LOOP_COUNT"
directly,
it won't hurt Exynos platform too much, cause Exynos didn't have this
problem,
then driver would received,the reply command very soon, so no more
additional
wait time would bring to Exynos platform.
Oh, sorry, little mistaken, I mean, is it okay for you to expand the
"DP_TIMEOUT_LOOP_COUNT" directly ?
- Yakir
And actually the datasheet haven't described the spec of aux reply
delay time.
Thanks,
- Yakir
Best regards,
Jingoo Han
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
--
1.9.1
___
Linux-rockchip mailing list
linux-rockc...@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v11 0/19] Add Analogix Core Display Port Driver
Hi Heiko,
On 12/18/2015 07:51 AM, Heiko Stübner wrote:
Hi Yakir,
Am Mittwoch, 16. Dezember 2015, 11:20:18 schrieb Yakir Yang:
The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
share the same IP, so a lot of parts can be re-used. I split the common
code into bridge directory, then rk3288 and exynos only need to keep
some platform code. Cause I can't find the exact IP name of exynos dp
controller, so I decide to name dp core driver with "analogix" which I
find in rk3288 eDP TRM
I'm really sorry for not thinking of this earlier, but I think we'll be doing
the atomic modesetting conversion of the drm/kms driver first - see v3 series
from Mark Yao.
Could you handle necessary changes to make it apply and work _after_ the
atomic modesetting conversion please?
Sure, I also want to rebase on Mark's atomic series. Would send the new
[PATCH v11.1 01/19] out today :)
- Yakir
Thanks
Heiko
But there are still three light registers setting differents bewteen
exynos and rk3288.
1. RK3288 have five special pll resigters which not indicata in exynos
dp controller.
2. The address of DP_PHY_PD(dp phy power manager register) are different
between rk3288 and exynos.
3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
register).
This series have been well tested on Rockchip platform with eDP panel on
Jerry Chromebook and Display Port Monitor on RK3288 board. Also I have
tested on Samsung Snow and Peach Pit Chromebooks, and thanks to
Javier@Samsung help to retest the whole series on Samsung Exynos5800 Peach
Pi Chromebook, glad to say that things works rightlly.
Thanks,
- Yakir
Changes in v11:
- Uses tabs to fix the indentation issues in analogix_dp_core.h (Heiko)
- Correct the title of this rockchip dp phy document(Rob)
- Add the ack from Rob Herring
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
- Add the ack from Rob Herring
- Revert parts of Gustavo Padovan's changes in commit:
drm/exynos: do not start enabling DP at bind() phase
Add dp phy poweron function in bind time.
- Move the panel prepare from get_modes time to bind time, and move
the panel unprepare from bridge->disable to unbind time. (Heiko)
Changes in v10:
- Add the ack from Rob Herring
- Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here
(Heiko) - Add the ack from Rob Herring
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
BIT(4) -> BIT(20)
- Remove the surplus "plat_data" check. (Heiko)
- switch (dp->plat_data && dp->plat_data->dev_type) {
+ switch (dp->plat_data->dev_type) {
Changes in v9:
- Document more details for 'ports' property.
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
- Modify the commit subject name. (Heiko)
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
- Simplify the commit message. (Kishon)
Changes in v6:
- Fix the Kconfig recursive dependency (Javier)
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the check condition of gpio_is_valid when driver try to get
the "hpd-gpios" DT propery. (Heiko)
- Move the platform attach callback in the front of core driver bridge
attch function. Cause once platform failed at attach, core driver should
still failed, so no need to init connector before platform attached
(Krzysztof) - Keep code style no changes with the previous exynos_dp_code.c
in this patch, and update commit message about the new export symbol
(Krzysztof) - Gather the device type patch (v4 11/16) into this one.
(Krzysztof) - leave out the connector registration to analogix platform
driver. (Thierry) - Resequence this patch after analogix_dp driver have
been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
- Switch video timing type to "u32", so driver could use
"of_property_read_u32" to get the backword
Re: [PATCH v10 0/17] Add Analogix Core Display Port Driver
Hi Heiko, On 12/15/2015 08:06 AM, Heiko Stübner wrote: Hi Yakir, Am Montag, 7. Dezember 2015, 14:37:19 schrieb Yakir Yang: The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller share the same IP, so a lot of parts can be re-used. I split the common code into bridge directory, then rk3288 and exynos only need to keep some platform code. Cause I can't find the exact IP name of exynos dp controller, so I decide to name dp core driver with "analogix" which I find in rk3288 eDP TRM so it looks like the hotplug works nicely now. I was able to test it sucessfully on both a Jerry and a Minnie device without needing to force hotplug :-) . As I needed to adapt some patches when applying the lastest ones, I think it would be good for a full send of the latest version as v11. Got it, will send soon ;) When going over the patches before sending, please also fix the indentation issues in analogix_dp_core.h - both newly added elements to analogix_dp_device use spaces between type and name, where the rest uses tabs. [This should of course be fixed in the patches adding these lines :-) ] Done, Thanks, - Yakir Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 02/19] drm: bridge: analogix/dp: fix some obvious code style
Fix some obvious alignment problems, like alignment and line
over 80 characters problems, make this easy to be maintained
later.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Resequence this patch after analogix_dp driver have been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
Changes in v4: None
Changes in v3: None
Changes in v2:
- Improved commit message more readable, and avoid using some
uncommon style like bellow: (Joe Preches)
- retval = exynos_dp_read_bytes_from_i2c(...
...);
+ retval =
+ exynos_dp_read_bytes_from_i2c(..);
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 129 ++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 72 ++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 124 ++--
3 files changed, 163 insertions(+), 162 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index fb8bda8..4a05c2b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -61,7 +61,7 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
while (analogix_dp_get_plug_in_status(dp) != 0) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
dev_err(dp->dev, "failed to get hpd plug status\n");
return -ETIMEDOUT;
}
@@ -98,8 +98,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- _block);
+ EDID_EXTENSION_FLAG,
+ _block);
if (retval)
return retval;
@@ -107,7 +107,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
I2C_EDID_DEVICE_ADDR,
+ retval = analogix_dp_read_bytes_from_i2c(dp,
+ I2C_EDID_DEVICE_ADDR,
EDID_HEADER_PATTERN,
EDID_BLOCK_LENGTH,
[EDID_HEADER_PATTERN]);
@@ -138,7 +139,7 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
}
analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- _vector);
+ _vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
analogix_dp_write_byte_to_dpcd(dp,
DP_TEST_EDID_CHECKSUM,
@@ -152,10 +153,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read EDID data */
retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- [EDID_HEADER_PATTERN]);
+ I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH, [EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -166,16 +165,13 @@ static int analogix_dp_read_edid(struct
analogix_dp_device *dp)
return -EIO;
}
- analogix_dp_read_byte_from_dpcd(dp,
- DP_TEST_REQUEST,
- _vector);
+ analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+ _vector);
if (test_vector & DP_TEST_LINK
[PATCH v11 0/19] Add Analogix Core Display Port Driver
ause the previous "platform device type support (v4 11/16)" already merge into (v5 02/14). - Implement connector registration code. (Thierry) - Split binding doc's from driver changes. (Rob) - Add eDP hotplug pinctrl property. (Heiko) - Remove "reg" DT property, cause driver could poweron/poweroff phy via the exist "grf" syscon already. And rename the example DT node from "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko) - Add deivce_node at the front of driver, update phy_ops type from "static struct" to "static const struct". And correct the input paramters of devm_phy_create() interfaces. (Heiko) - Split binding doc's from driver changes. (Rob) - Update the rockchip,grf explain in document, and correct the clock required elemets in document. (Rob & Heiko) - Fix compiled error (Heiko) - Using the connector display info message to configure eDP driver input video mode, but hard code CRTC video output mode to RGBaaa. Changes in v4: - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob) - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo) - Create a separate folder for analogix code in bridge/ (Archit) - Update commit message more readable. (Jingoo) - Adjust the order from 05 to 04 - Provide backword compatibility with samsung. (Krzysztof) - Split all DTS changes, and provide backward compatibility. Mark old properties as deprecated but still support them. (Krzysztof) - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob) - Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry) "analogix,color-space" & "analogix,color-depth" & "analogix,link-rate" & "analogix,lane-count"& "analogix,ycbcr-coeff" & "analogix,dynamic-range" & "vsync-active-high"& "hsync-active-high" & "interlaces" - Separate all DTS changes to a separate patch. (Krzysztof) - Remove some deprecated DT properties in rockchip dp document. - Add commit message, and remove the redundant rockchip_dp_phy_init() function, move those code to probe() method. And remove driver .owner number. (Kishon) - Seprate the link-rate and lane-count limit out with the device_type flag. (Thierry) - Take Jingoo suggest, add commit messages. - Call drm_panel_prepare() in .get_modes function, ensure panel should power on before driver try to read edid message. Changes in v3: - Move exynos's video_timing code to analogix_dp-exynos platform driver, add get_modes method to struct analogix_dp_plat_data. (Thierry) - Rename some "samsung*" dts propery to "analogix*". (Heiko) - The link_rate and lane_count shouldn't config to the DT property value directly, but we can take those as hardware limite. For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would like "link-rate = 0x0a" "lane-count = 4". (Thierry) - Dynamic parse video timing info from struct drm_display_mode and struct drm_display_info. (Thierry) - Add devicetree binding documents. (Heiko) - Remove sync pol & colorimetry properies from the new analogix dp driver devicetree binding. (Thierry) - Update the exist exynos dtsi file with the latest DP DT properies. - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform driver which name to "pclk". (Thierry & Heiko) - Add devicetree binding document. (Heiko) - Remove "rockchip,panel" DT property, take use of remote point to get panel node. (Heiko) - Add the new function point dp_platdata->get_modes() init. - Suggest, add rockchip dp phy driver, collect the phy clocks and power control. (Heiko) - Add "analogix,need-force-hpd" to indicate whether driver need foce hpd when hpd detect failed. - move dp hpd detect to connector detect function. - Add edid modes parse support Changes in v2: - Remove new copyright (Jingoo) - Fix compiled failed due to analogix_dp_device misspell - Improved commit message more readable, and avoid using some uncommon style like bellow: (Joe Preches) - retval = exynos_dp_read_bytes_from_i2c(... ...); + retval = + exynos_dp_read_bytes_from_i2c(..); - Get panel node with remote-endpoint method, and create devicetree binding for driver. (Heiko) - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m", leave those clock to rockchip dp phy driver. - Fix compile failed dut to phy_pd_addr variable misspell error Mark Yao (1): drm: rockchip: vop: add bpc and color mode setting
[PATCH v11 05/19] dt-bindings: add document for analogix display port driver
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10:
- Add the ack from Rob Herring
Changes in v9: None
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count"&
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high"& "hsync-active-high" & "interlaces"
Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 50 +
.../bindings/display/exynos/exynos_dp.txt | 65 --
2 files changed, 72 insertions(+), 43 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+* "samsung,exynos5-dp"
+* "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ *
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+---
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b 0x1>;
+ interrupts = <10 3>;
+ interrupt-parent = <>;
+ clocks = < 342>;
+ clock-names = "dp";
+
+ phys = <_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2..9905081 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
-
[PATCH v11 11/19] drm: rockchip: vop: add bpc and color mode setting
From: Mark Yao <y...@rock-chips.com>
Add bpc and color mode setting in rockchip_drm_vop driver, so
connector could try to use the edid drm_display_info to config
vop output mode.
Signed-off-by: Mark Yao <y...@rock-chips.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Fix compiled error (Heiko)
- Using the connector display info message to configure eDP driver input
video mode, but hard code CRTC video output mode to RGBaaa.
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25 +++
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 32 ++---
4 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 2c82a9a..3990951 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -180,14 +180,29 @@ static void rockchip_dp_drm_encoder_mode_set(struct
drm_encoder *encoder,
static void rockchip_dp_drm_encoder_prepare(struct drm_encoder *encoder)
{
struct rockchip_dp_device *dp = to_dp(encoder);
+ struct drm_connector *cn = >connector;
+ int ret = -1;
u32 val;
- int ret;
- ret = rockchip_drm_crtc_mode_config(encoder->crtc,
- DRM_MODE_CONNECTOR_eDP,
- ROCKCHIP_OUT_MODE_);
+ /*
+* FIXME(Yakir): driver should configure the CRTC output video
+* mode with the display information which indicated the monitor
+* support colorimetry.
+*
+* But don't know why the CRTC driver seems could only output the
+* RGBaaa rightly. For example, if connect the "innolux,n116bge"
+* eDP screen, EDID would indicated that screen only accepted the
+* 6bpc mode. But if I configure CRTC to RGB666 output, then eDP
+* screen would show a blue picture (RGB888 show a green picture).
+* But if I configure CTRC to RGBaaa, and eDP driver still keep
+* RGB666 input video mode, then screen would works prefect.
+*/
+ if (cn->display_info.color_formats & DRM_COLOR_FORMAT_RGB444)
+ ret = rockchip_drm_crtc_mode_config(encoder->crtc,
+ DRM_MODE_CONNECTOR_eDP,
+ 10, DRM_COLOR_FORMAT_RGB444);
if (ret < 0) {
- dev_err(dp->dev, "Could not set crtc mode config: %d.\n", ret);
+ dev_err(dp->dev, "Could not set crtc mode config (%d)\n", ret);
return;
}
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 80d6fc8..428a3c1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -215,7 +215,7 @@ static void dw_hdmi_rockchip_encoder_commit(struct
drm_encoder *encoder)
static void dw_hdmi_rockchip_encoder_prepare(struct drm_encoder *encoder)
{
rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_HDMIA,
- ROCKCHIP_OUT_MODE_);
+ 10, DRM_COLOR_FORMAT_RGB444);
}
static struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs =
{
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index dc4e5f0..ef1d7fb 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -59,7 +59,7 @@ void rockchip_unregister_crtc_funcs(struct drm_device *dev,
int pipe);
int rockchip_drm_encoder_get_mux_id(struct device_node *node,
struct drm_encoder *encoder);
int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc, int connector_type,
- int out_mode);
+ int bpc, int color);
int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
struct device *dev);
void rockchip_drm_dma_detach_device(struct drm_device *drm_dev,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..9ef4a1f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1062,14 +1062,40 @@ static const struct drm_plane_funcs vop_plane_funcs = {
int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
int connector_type,
-
[PATCH v11 15/19] drm: bridge: analogix/dp: move hpd detect to connector detect function
This change just make a little clean to make code more like
drm core expect, move hdp detect code from bridge->enable(),
and place them into connector->detect().
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now the connector status don't hardcode to connected,
need to operate dp phy in .detect function, so we need to revert
parts if Gustavo Padovan's changes, add phy poweron
function in bind time.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11:
- Revert parts of Gustavo Padovan's changes in commit:
drm/exynos: do not start enabling DP at bind() phase
Add dp phy poweron function in bind time.
- Move the panel prepare from get_modes time to bind time, and move
the panel unprepare from bridge->disable to unbind time. (Heiko)
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Take Jingoo suggest, add commit messages.
Changes in v3:
- move dp hpd detect to connector detect function.
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 38 --
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 9eb17ce..952c2c3 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -901,12 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_detect_hpd(dp);
- if (ret) {
- /* Cable has been disconnected, we're done */
- return;
- }
-
ret = analogix_dp_handle_edid(dp);
if (ret) {
dev_err(dp->dev, "unable to handle edid\n");
@@ -941,6 +935,11 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
enum drm_connector_status analogix_dp_detect(struct device *dev, bool force)
{
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
+
+ if (analogix_dp_detect_hpd(dp))
+ return connector_status_disconnected;
+
return connector_status_connected;
}
EXPORT_SYMBOL_GPL(analogix_dp_detect);
@@ -1006,13 +1005,6 @@ static void analogix_dp_bridge_enable(struct drm_bridge
*bridge)
pm_runtime_get_sync(dp->dev);
- if (dp->plat_data->panel) {
- if (drm_panel_prepare(dp->plat_data->panel)) {
- DRM_ERROR("failed to setup the panel\n");
- return;
- }
- }
-
if (dp->plat_data->power_on)
dp->plat_data->power_on(dp->plat_data);
@@ -1045,11 +1037,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
- if (dp->plat_data->panel) {
- if (drm_panel_unprepare(dp->plat_data->panel))
- DRM_ERROR("failed to turnoff the panel\n");
- }
-
pm_runtime_put_sync(dp->dev);
dp->dpms_mode = DRM_MODE_DPMS_OFF;
@@ -1307,6 +1294,15 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
pm_runtime_enable(dev);
+ phy_power_on(dp->phy);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EBUSY;
+ }
+ }
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
@@ -1340,6 +1336,12 @@ void analogix_dp_unbind(struct device *dev, struct
device *master,
struct analogix_dp_device *dp = dev_get_drvdata(dev);
analogix_dp_bridge_disable(dp->bridge);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
+ DRM_ERROR("failed to turnoff the panel\n");
+ }
+
pm_runtime_disable(dev);
}
EXPORT_SYMBOL_GPL(analogix_dp_unbind);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 17/19] drm: bridge: analogix/dp: expand the look time for waiting AUX CH reply
After test on rockchiop platform, i found sometims driver would failed
at reading EDID message. After debugging more, i found that it's okay
to read_a byte from i2c, but it would failed at AUX transcation if we
try to ready multi-bytes from i2c.
Driver just can't received the AUX CH reply command, even no AUX error
code. I may guess that the AUX wait time is not enough, so I try to
expand the AUX wait time, and i do see this could fix the EDID read
failed at rockchip platform.
And I thought that expand the wait time won't hurt Exynos platform too
much, cause Exynos didn't have this problem, then driver would received
the reply command very soon, so no more additional wait time would bring
to Exynos platform.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index c7e2959..dc376bd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -482,7 +482,7 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
while (!(reg & RPLY_RECEIV)) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (DP_TIMEOUT_LOOP_COUNT * 10 < timeout_loop) {
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 18/19] drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time
Turn off the panel power in suspend time would help to reduce
power waste.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index d18054d..bc4a9e0 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1357,6 +1357,12 @@ int analogix_dp_suspend(struct device *dev)
struct analogix_dp_device *dp = dev_get_drvdata(dev);
clk_disable_unprepare(dp->clock);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
+ DRM_ERROR("failed to turnoff the panel\n");
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(analogix_dp_suspend);
@@ -1372,6 +1378,13 @@ int analogix_dp_resume(struct device *dev)
return ret;
}
+ if (dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EBUSY;
+ }
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(analogix_dp_resume);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 07/19] drm: rockchip: dp: add rockchip platform dp driver
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10:
- Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here (Heiko)
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Remove the empty line at the end of document, and correct the endpoint
numbers in the example DT node, and remove the regulator iomux setting
in driver code while using the pinctl in devicetree instead. (Heiko)
- Add device type declared, cause the previous "platform device type
support (v4 11/16)" already merge into (v5 02/14).
- Implement connector registration code. (Thierry)
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.
Changes in v3:
- Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
and leave "sclk_edp" to analogix dp core driver which name to "dp",
and leave "pclk_edp" to rockchip dp platform driver which name to
"pclk". (Thierry & Heiko)
- Add devicetree binding document. (Heiko)
- Remove "rockchip,panel" DT property, take use of remote point to get panel
node. (Heiko)
- Add the new function point dp_platdata->get_modes() init.
Changes in v2:
- Get panel node with remote-endpoint method, and create devicetree binding
for driver. (Heiko)
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
drivers/gpu/drm/rockchip/Kconfig| 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 442
include/drm/bridge/analogix_dp.h| 1 +
4 files changed, 453 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..686cb49 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_ANALOGIX_DP
+ tristate "Rockchip specific extensions for Analogix DP driver"
+ depends on DRM_ROCKCHIP
+ select DRM_ANALOGIX_DP
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile
b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
new file mode 100644
index 000..2c82a9a
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,442 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy@rock-chips.com>
+ * Yakir Yang <y...@rock-chips.com>
+ * Jeff Chen <jeff.c...@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
+
+/* dp grf register offset */
+#define GRF_SOC_CON60x025c
+#define GRF_EDP_LCD_SEL_MASKBIT(5)
+#define GRF_EDP_SEL_VOP_LIT BIT(5)
+#define GRF_EDP_SEL_VOP_BIG 0
+
+struct rockchip_dp_device {
+ struct drm_device*drm_dev;
+ struct device*dev;
+ struct drm_encoder encoder;
+ struct drm_connector connector;
+ struct drm_display_mode mode;
+
+ struct
[PATCH v11 06/19] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver
After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.
Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the misspell in commit message. (Krzysztof)
Changes in v4:
- Separate all DTS changes to a separate patch. (Krzysztof)
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/exynos5250-arndale.dts | 2 --
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 --
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +---
arch/arm/boot/dts/exynos5250-spring.dts | 4 +---
arch/arm/boot/dts/exynos5420-peach-pit.dts| 4 +---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 --
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +---
7 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..b1790cf 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -124,8 +124,6 @@
{
status = "okay";
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..f30c2db 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -80,8 +80,6 @@
{
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 5cb33ba..b96624b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -236,12 +236,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 7 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts
b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..91881d7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -74,12 +74,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
- samsung,hpd-gpio = < 0 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 0 GPIO_ACTIVE_HIGH>;
};
{
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 35cfb07..2f37c87 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -148,12 +148,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 6 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..f67344f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -93,8 +93,6 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
-
[PATCH v11 10/19] dt-bindings: add document for rockchip dp phy
Add dt binding documentation for rockchip display port PHY.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v11:
- Correct the title of this rockchip dp phy document(Rob)
- Add the ack from Rob Herring
Changes in v10: None
Changes in v9: None
Changes in v8:
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Simplify the commit message. (Kishon)
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Update the rockchip,grf explain in document, and correct the clock required
elemets in document. (Rob & Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/phy/rockchip-dp-phy.txt| 22 ++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 000..50c4f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip specific extensions to the Analogix Display Port PHY
+
+
+Required properties:
+- compatible : should be one of the following supported values:
+- "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ rockchip,grf = <>;
+ clocks = < SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 14/19] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11:
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
- Add the ack from Rob Herring
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 35 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..4f2ba8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 04d99e3..e832ff9 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index f624810..9eb17ce 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->force_hpd)
+ return -ETIMEDOUT;
+
+ /*
+* The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+* will not work, so we need to give a f
[PATCH v11 16/19] drm: bridge: analogix/dp: add edid modes parse in get_modes method
Display Port monitor could support kinds of mode which indicate
in monitor edid, not just one single display resolution which
defined in panel or devivetree property display timing.
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now driver need to read edid message in .get_modes()
function, so controller must be inited in bind time, so we
need to add controller init back.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Call drm_panel_prepare() in .get_modes function, ensure panel should
power on before driver try to read edid message.
Changes in v3:
- Add edid modes parse support
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 19 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 46 +++---
2 files changed, 35 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 952c2c3..d18054d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -107,7 +107,7 @@ static unsigned char
analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
static int analogix_dp_read_edid(struct analogix_dp_device *dp)
{
- unsigned char edid[EDID_BLOCK_LENGTH * 2];
+ unsigned char *edid = dp->edid;
unsigned int extend_block = 0;
unsigned char sum;
unsigned char test_vector;
@@ -901,12 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_handle_edid(dp);
- if (ret) {
- dev_err(dp->dev, "unable to handle edid\n");
- return;
- }
-
ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
dp->video_info.max_link_rate);
if (ret) {
@@ -947,8 +941,17 @@ EXPORT_SYMBOL_GPL(analogix_dp_detect);
int analogix_dp_get_modes(struct device *dev)
{
struct analogix_dp_device *dp = dev_get_drvdata(dev);
+ struct edid *edid = (struct edid *)dp->edid;
int num_modes = 0;
+ if (analogix_dp_handle_edid(dp)) {
+ dev_err(dp->dev, "unable to handle edid\n");
+ return -EINVAL;
+ }
+
+ drm_mode_connector_update_edid_property(dp->connector, edid);
+ num_modes += drm_add_edid_modes(dp->connector, edid);
+
if (dp->plat_data->panel)
num_modes += drm_panel_get_modes(dp->plat_data->panel);
@@ -1303,6 +1306,8 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
}
}
+ analogix_dp_init_dp(dp);
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index baa06e2..73b780e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -20,6 +20,28 @@
#define MAX_CR_LOOP5
#define MAX_EQ_LOOP5
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR 0x50
+#define I2C_E_EDID_DEVICE_ADDR 0x30
+
+#define EDID_BLOCK_LENGTH 0x80
+#define EDID_HEADER_PATTERN0x00
+#define EDID_EXTENSION_FLAG0x7e
+#define EDID_CHECKSUM 0x7f
+
+/* DP_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
+
+/* DP_LANE_COUNT_SET */
+#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
+
+/* DP_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
+#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
+
enum link_rate_type {
LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
@@ -161,6 +183,7 @@ struct analogix_dp_device {
int dpms_mode;
int hpd_gpio;
boolforce_hpd;
+ unsigned char edid[EDID_BLOCK_LE
[PATCH v11 19/19] drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time
It may caused a dead lock if we flush the hpd work in bridge disable time.
The normal flow would like:
IN --> DRM IOCTL
1. Acquire crtc_ww_class_mutex (DRM IOCTL)
IN --> analogix_dp_bridge
2. Acquire hpd work lock (Flush hpd work)
3. HPD work already in idle, no need to run the work function.
OUT <-- analogix_dp_bridge
OUT <-- DRM IOCTL
The dead lock flow would like:
IN --> DRM IOCTL
1. Acquire crtc_ww_class_mutex (DRM IOCTL)
IN --> analogix_dp_bridge
2. Acquire hpd work lock (Flush hpd work)
IN --> analogix_dp_hotplug
IN --> drm_helper_hpd_irq_event
3. Acquire mode_config lock (This lock already have been acquired in
previous step 1)
** Dead Lock Now **
It's wrong to flush the hpd work in bridge->disable time, I guess the
original code just want to ensure the delay work must be finish before
encoder disabled.
The flush work in bridge disable time is try to ensure the HPD event
won't be missed before display card disabled, actually we can take a
fast respond way(interrupt thread) to update DRM HPD event to fix the
delay update and possible dead lock.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 62 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 26 +
3 files changed, 55 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index bc4a9e0..c66c522 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -848,47 +848,40 @@ static void analogix_dp_enable_scramble(struct
analogix_dp_device *dp,
}
}
-static irqreturn_t analogix_dp_irq_handler(int irq, void *arg)
+static irqreturn_t analogix_dp_hardirq(int irq, void *arg)
{
struct analogix_dp_device *dp = arg;
-
+ irqreturn_t ret = IRQ_NONE;
enum dp_irq_type irq_type;
irq_type = analogix_dp_get_irq_type(dp);
- switch (irq_type) {
- case DP_IRQ_TYPE_HP_CABLE_IN:
- dev_dbg(dp->dev, "Received irq - cable in\n");
- schedule_work(>hotplug_work);
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- case DP_IRQ_TYPE_HP_CABLE_OUT:
- dev_dbg(dp->dev, "Received irq - cable out\n");
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- case DP_IRQ_TYPE_HP_CHANGE:
- /*
-* We get these change notifications once in a while, but there
-* is nothing we can do with them. Just ignore it for now and
-* only handle cable changes.
-*/
- dev_dbg(dp->dev, "Received irq - hotplug change; ignoring.\n");
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- default:
- dev_err(dp->dev, "Received irq - unknown type!\n");
- break;
+ if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+ analogix_dp_mute_hpd_interrupt(dp);
+ ret = IRQ_WAKE_THREAD;
}
- return IRQ_HANDLED;
+
+ return ret;
}
-static void analogix_dp_hotplug(struct work_struct *work)
+static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
{
- struct analogix_dp_device *dp;
+ struct analogix_dp_device *dp = arg;
+ enum dp_irq_type irq_type;
+
+ irq_type = analogix_dp_get_irq_type(dp);
+ if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN ||
+ irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) {
+ dev_dbg(dp->dev, "Detected cable status changed!\n");
+ if (dp->drm_dev)
+ drm_helper_hpd_irq_event(dp->drm_dev);
+ }
- dp = container_of(work, struct analogix_dp_device, hotplug_work);
+ if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+ analogix_dp_clear_hotplug_interrupts(dp);
+ analogix_dp_unmute_hpd_interrupt(dp);
+ }
- if (dp->drm_dev)
- drm_helper_hpd_irq_event(dp->drm_dev);
+ return IRQ_HANDLED;
}
static void analogix_dp_commit(struct analogix_dp_device *dp)
@@ -1034,7 +1027,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
}
disable_irq(dp->irq);
- flush_work(>hotplug_work);
phy_power_off(dp->phy);
if (dp->plat_data->power_off)
@@ -1293,8 +1285,6 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
return -ENO
[PATCH v11 03/19] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.
Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04
Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
directly, but we can take those as hardware limite. For example, RK3288
only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
like "link-rate = 0x0a" "lane-count = 4". (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 4a05c2b..6f899cd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct
analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+* For DP rev.1.2, Maximum link rate of Main Link lanes
+* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, );
*bandwidth = data;
@@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct
analogix_dp_device *dp,
analogix_dp_get_max_rx_lane_count(dp, >link_train.lane_count);
if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
+ (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 8e84208..57aa4b0d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -21,8 +21,9 @@
#define MAX_EQ_LOOP5
enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
+ LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
+ LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
+ LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
};
enum link_lane_count_type {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 04/19] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
Changes in v6: None
Changes in v5:
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
to get the backword timing values. Krzysztof suggest me that driver could use
the "of_property_read_bool" to get backword timing values, but that interfacs
would modify the original drm_display_mode timing directly (whether those
properties exists or not).
Changes in v4:
- Provide backword compatibility with samsung. (Krzysztof)
Changes in v3:
- Dynamic parse video timing info from struct drm_display_mode and
struct drm_display_info. (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 148 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
3 files changed, 103 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6f899cd..a0d97cb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
-dp->video_info->link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
+dp->video_info.link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1032,6 +1032,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *orig_mode,
+ struct drm_display_mode *mode)
+{
+ struct analogix_dp_device *dp = bridge->driver_private;
+ struct drm_display_info *display_info = >connector->display_info;
+ struct video_info *video = >video_info;
+ struct device_node *dp_node = dp->dev->of_node;
+ int vic;
+
+ /* Input video interlaces & hsync pol & vsync pol */
+ video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+ video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+ video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+ /* Input video dynamic_range & colorimetry */
+ vic = drm_match_cea_mode(mode);
+ if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+ (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR601;
+ } else if (vic) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ } else {
+ video->dynamic_range = VESA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ }
+
+ /* Input vide bpc and color_formats */
+ switch (display_info->bpc) {
+ case 12:
+ video->color_depth = COLOR_12;
+ break;
+ case 10:
+ video->color_depth = COLOR_10;
+ break;
+ case 8:
+ video->color_depth = COLOR_8;
+ break;
+ case 6:
+ video->color_depth = COLOR_6;
+ break;
+ default:
+ video->color_depth = COLOR_8;
+ break;
+ }
+ if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ video->color_space = COLOR_YCBCR444;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ video->color_space = COLOR_YCBCR422;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+ video->color_space = COLOR_RGB;
+ else
+
[PATCH v11 09/19] phy: Add driver for rockchip Display Port PHY
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v11: None
Changes in v10:
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
BIT(4) -> BIT(20)
Changes in v9:
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.
Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
the exist "grf" syscon already. And rename the example DT node from
"edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
struct" to "static const struct". And correct the input paramters of
devm_phy_create() interfaces. (Heiko)
Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
function, move those code to probe() method. And remove driver .owner
number. (Kishon)
Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
power control. (Heiko)
Changes in v2: None
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 151 ++
3 files changed, 159 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-dp.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)+=
phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)+= phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)+= phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..3cb3bf8
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+ } else {
+ clk_disable_unprepare(dp->phy_24m);
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_
[PATCH v11 08/19] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v11: None
Changes in v10:
- Add the ack from Rob Herring
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..04d99e3
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the output of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v11 12/19] drm: bridge: analogix/dp: add some rk3288 special registers setting
RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix compile failed dut to phy_pd_addr variable misspell error
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 76 ++-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 12
2 files changed, 60 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 861097a..21a3287 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -15,6 +15,8 @@
#include
#include
+#include
+
#include "analogix_dp_core.h"
#include "analogix_dp_reg.h"
@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device
*dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+ writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+ writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+ writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+ writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+ writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+ }
+
reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct
analogix_dp_device *dp,
bool enable)
{
u32 reg;
+ u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH0_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH1_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH2_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = re
[PATCH v11 13/19] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288
There are some IP limit on rk3288 that only support 4 physical lanes
of 2.7/1.6 Gbps/lane, so seprate them out by device_type flag.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v11: None
Changes in v10:
- Remove the surplus "plat_data" check. (Heiko)
- switch (dp->plat_data && dp->plat_data->dev_type) {
+ switch (dp->plat_data->dev_type) {
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Seprate the link-rate and lane-count limit out with the device_type
flag. (Thierry)
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 33 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 +--
2 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a0d97cb..f624810 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
-dp->video_info.link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
+dp->video_info.max_link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1158,16 +1158,25 @@ static int analogix_dp_dt_parse_pdata(struct
analogix_dp_device *dp)
struct device_node *dp_node = dp->dev->of_node;
struct video_info *video_info = >video_info;
- if (of_property_read_u32(dp_node, "samsung,link-rate",
-_info->link_rate)) {
- dev_err(dp->dev, "failed to get link-rate\n");
- return -EINVAL;
- }
-
- if (of_property_read_u32(dp_node, "samsung,lane-count",
-_info->lane_count)) {
- dev_err(dp->dev, "failed to get lane-count\n");
- return -EINVAL;
+ switch (dp->plat_data->dev_type) {
+ case RK3288_DP:
+ /*
+* Like Rk3288 DisplayPort TRM indicate that "Main link
+* containing 4 physical lanes of 2.7/1.62 Gbps/lane".
+*/
+ video_info->max_link_rate = 0x0A;
+ video_info->max_lane_count = 0x04;
+ break;
+ case EXYNOS_DP:
+ /*
+* NOTE: those property parseing code is used for
+* providing backward compatibility for samsung platform.
+*/
+ of_property_read_u32(dp_node, "samsung,link-rate",
+_info->max_link_rate);
+ of_property_read_u32(dp_node, "samsung,lane-count",
+_info->max_lane_count);
+ break;
}
return 0;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 0416d23..4ec 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -129,8 +129,8 @@ struct video_info {
enum color_coefficient ycbcr_coeff;
enum color_depth color_depth;
- enum link_rate_type link_rate;
- enum link_lane_count_type lane_count;
+ enum link_rate_type max_link_rate;
+ enum link_lane_count_type max_lane_count;
};
struct link_train {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10.1 15/19] drm: bridge: analogix/dp: move hpd detect to connector detect function
This change just make a little clean to make code more like
drm core expect, move hdp detect code from bridge->enable(),
and place them into connector->detect().
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now the connector status don't hardcode to connected,
need to operate dp phy in .detect function, so we need to revert
parts if Gustavo Padovan's changes, add phy poweron
function in bind time.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10.1:
- Move the panel prepare from get_modes time to bind time, and move
the panel unprepare from bridge->disable to unbind time. (Heiko)
Changes in v10:
- Revert parts of Gustavo Padovan's changes in commit:
drm/exynos: do not start enabling DP at bind() phase
Add dp phy poweron function in bind time.
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Take Jingoo suggest, add commit messages.
Changes in v3:
- move dp hpd detect to connector detect function.
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 38 --
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 00aee44..6a13167 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -901,12 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_detect_hpd(dp);
- if (ret) {
- /* Cable has been disconnected, we're done */
- return;
- }
-
ret = analogix_dp_handle_edid(dp);
if (ret) {
dev_err(dp->dev, "unable to handle edid\n");
@@ -941,6 +935,11 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
enum drm_connector_status analogix_dp_detect(struct device *dev, bool force)
{
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
+
+ if (analogix_dp_detect_hpd(dp))
+ return connector_status_disconnected;
+
return connector_status_connected;
}
EXPORT_SYMBOL_GPL(analogix_dp_detect);
@@ -1006,13 +1005,6 @@ static void analogix_dp_bridge_enable(struct drm_bridge
*bridge)
pm_runtime_get_sync(dp->dev);
- if (dp->plat_data->panel) {
- if (drm_panel_prepare(dp->plat_data->panel)) {
- DRM_ERROR("failed to setup the panel\n");
- return;
- }
- }
-
if (dp->plat_data->power_on)
dp->plat_data->power_on(dp->plat_data);
@@ -1045,11 +1037,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
- if (dp->plat_data->panel) {
- if (drm_panel_unprepare(dp->plat_data->panel))
- DRM_ERROR("failed to turnoff the panel\n");
- }
-
pm_runtime_put_sync(dp->dev);
dp->dpms_mode = DRM_MODE_DPMS_OFF;
@@ -1307,6 +1294,15 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
pm_runtime_enable(dev);
+ phy_power_on(dp->phy);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EBUSY;
+ }
+ }
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
@@ -1340,6 +1336,12 @@ void analogix_dp_unbind(struct device *dev, struct
device *master,
struct analogix_dp_device *dp = dev_get_drvdata(dev);
analogix_dp_bridge_disable(dp->bridge);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
+ DRM_ERROR("failed to turnoff the panel\n");
+ }
+
pm_runtime_disable(>dev);
}
EXPORT_SYMBOL_GPL(analogix_dp_unbind);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 18/19] drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time
Turn off the panel power in suspend time would help to reduce
power waste.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
This patch was introduced in v10.1, suggested by Heiko
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index f5047ac..79ba88e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1364,6 +1364,12 @@ int analogix_dp_suspend(struct device *dev)
struct analogix_dp_device *dp = dev_get_drvdata(dev);
clk_disable_unprepare(dp->clock);
+
+ if (dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
+ DRM_ERROR("failed to turnoff the panel\n");
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(analogix_dp_suspend);
@@ -1379,6 +1385,13 @@ int analogix_dp_resume(struct device *dev)
return ret;
}
+ if (dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EBUSY;
+ }
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(analogix_dp_resume);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 19/19] drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time
It may caused a dead lock if we flush the hpd work in bridge disable time.
The normal flow would like:
IN --> DRM IOCTL
1. Acquire crtc_ww_class_mutex (DRM IOCTL)
IN --> analogix_dp_bridge
2. Acquire hpd work lock (Flush hpd work)
3. HPD work already in idle, no need to run the work function.
OUT <-- analogix_dp_bridge
OUT <-- DRM IOCTL
The dead lock flow would like:
IN --> DRM IOCTL
1. Acquire crtc_ww_class_mutex (DRM IOCTL)
IN --> analogix_dp_bridge
2. Acquire hpd work lock (Flush hpd work)
IN --> analogix_dp_hotplug
IN --> drm_helper_hpd_irq_event
3. Acquire mode_config lock (This lock already have been acquired in
previous step 1)
** Dead Lock Now **
It's wrong to flush the hpd work in bridge->disable time, I guess the
original code just want to ensure the delay work must be finish before
encoder disabled.
The flush work in bridge disable time is try to ensure the HPD event
won't be missed before display card disabled, actually we can take a
fast respond way(interrupt thread) to update DRM HPD event to fix the
delay update and possible dead lock.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
This patch was introduced in v10.1, suggested by Heiko
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 62 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 26 +
3 files changed, 55 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 79ba88e..5977e06 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -848,47 +848,40 @@ static void analogix_dp_enable_scramble(struct
analogix_dp_device *dp,
}
}
-static irqreturn_t analogix_dp_irq_handler(int irq, void *arg)
+static irqreturn_t analogix_dp_hardirq(int irq, void *arg)
{
struct analogix_dp_device *dp = arg;
-
+ irqreturn_t ret = IRQ_NONE;
enum dp_irq_type irq_type;
irq_type = analogix_dp_get_irq_type(dp);
- switch (irq_type) {
- case DP_IRQ_TYPE_HP_CABLE_IN:
- dev_dbg(dp->dev, "Received irq - cable in\n");
- schedule_work(>hotplug_work);
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- case DP_IRQ_TYPE_HP_CABLE_OUT:
- dev_dbg(dp->dev, "Received irq - cable out\n");
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- case DP_IRQ_TYPE_HP_CHANGE:
- /*
-* We get these change notifications once in a while, but there
-* is nothing we can do with them. Just ignore it for now and
-* only handle cable changes.
-*/
- dev_dbg(dp->dev, "Received irq - hotplug change; ignoring.\n");
- analogix_dp_clear_hotplug_interrupts(dp);
- break;
- default:
- dev_err(dp->dev, "Received irq - unknown type!\n");
- break;
+ if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+ analogix_dp_mute_hpd_interrupt(dp);
+ ret = IRQ_WAKE_THREAD;
}
- return IRQ_HANDLED;
+
+ return ret;
}
-static void analogix_dp_hotplug(struct work_struct *work)
+static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
{
- struct analogix_dp_device *dp;
+ struct analogix_dp_device *dp = arg;
+ enum dp_irq_type irq_type;
+
+ irq_type = analogix_dp_get_irq_type(dp);
+ if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN ||
+ irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) {
+ dev_dbg(dp->dev, "Detected cable status changed!\n");
+ if (dp->drm_dev)
+ drm_helper_hpd_irq_event(dp->drm_dev);
+ }
- dp = container_of(work, struct analogix_dp_device, hotplug_work);
+ if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+ analogix_dp_clear_hotplug_interrupts(dp);
+ analogix_dp_unmute_hpd_interrupt(dp);
+ }
- if (dp->drm_dev)
- drm_helper_hpd_irq_event(dp->drm_dev);
+ return IRQ_HANDLED;
}
static void analogix_dp_commit(struct analogix_dp_device *dp)
@@ -1041,7 +1034,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
}
disable_irq(dp->irq);
- flush_work(>hotplug_work);
phy_power_off(dp->phy);
if (dp->plat_data->power_off)
@@ -1300,8 +1292,6 @@ int analogix_dp_bind(struct device *dev, struct
drm_device
[PATCH v10.1 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10.1:
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 35 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..4f2ba8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index dae86c4..187a708e 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a11504b..00aee44 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->force_hpd)
+ return -ETIMEDOUT;
+
+ /*
+* The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+* will not work, so we need to give a force hpd action to
+* set HPD_STATUS manually.
+*/
+ dev_dbg(dp->dev, &
Re: [PATCH v10 10/17] dt-bindings: add document for rockchip dp phy
Hi Rob
On 12/08/2015 11:06 PM, Rob Herring wrote:
On Mon, Dec 07, 2015 at 02:39:50PM +0800, Yakir Yang wrote:
Add dt binding documentation for rockchip display port PHY.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
One possible typo below, otherwise:
Acked-by: Rob Herring <r...@kernel.org>
Thanks, it's a typo :)
---
Changes in v10: None
Changes in v9: None
Changes in v8:
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Simplify the commit message. (Kishon)
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Update the rockchip,grf explain in document, and correct the clock required
elemets in document. (Rob & Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/phy/rockchip-dp-phy.txt| 22 ++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 000..00902cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip Soc Seroes Display Port PHY
^
Is this supposed to be SerDes?
Hmmm... it shouldn't be SerDes, i guess i may want 'series' which copy
from samsung-phy.txt.
Thanks for catch that, for now i think it should be "Rockchip specific
extensions to the Analogix Display Port PHY". I would send the v10.1 to
fix this typo :)
Thanks,
- Yakir
+
+
+Required properties:
+- compatible : should be one of the following supported values:
+- "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ rockchip,grf = <>;
+ clocks = < SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+};
--
1.9.1
___
dri-devel mailing list
dri-de...@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10.1 10/17] dt-bindings: add document for rockchip dp phy
Add dt binding documentation for rockchip display port PHY.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v10.1:
- Add the ack from Rob Herring
- Correct the title of this rockchip dp phy document(Rob)
Changes in v9: None
Changes in v8:
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Simplify the commit message. (Kishon)
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Update the rockchip,grf explain in document, and correct the clock required
elemets in document. (Rob & Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/phy/rockchip-dp-phy.txt| 22 ++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 000..50c4f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip specific extensions to the Analogix Display Port PHY
+
+
+Required properties:
+- compatible : should be one of the following supported values:
+- "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ rockchip,grf = <>;
+ clocks = < SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10.1 05/17] dt-bindings: add document for analogix display port driver
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10.1:
- Add the ack from Rob Herring
Changes in v10: None
Changes in v9: None
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count"&
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high"& "hsync-active-high" & "interlaces"
Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 50 +
.../bindings/display/exynos/exynos_dp.txt | 65 --
2 files changed, 72 insertions(+), 43 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+* "samsung,exynos5-dp"
+* "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ *
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+---
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b 0x1>;
+ interrupts = <10 3>;
+ interrupt-parent = <>;
+ clocks = < 342>;
+ clock-names = "dp";
+
+ phys = <_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2..9905081 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
[PATCH v10.1 08/17] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v10.1:
- Add the ack from Rob Herring
Changes in v10: None
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v10 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Hi Rob,
Thanks for your respond.
On 12/08/2015 11:09 PM, Rob Herring wrote:
On Mon, Dec 07, 2015 at 02:40:42PM +0800, Yakir Yang wrote:
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
I can see this being common. Just make it "force-hpd".
Okay, I would send the v10.1 out.
- Yakir
Rob
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 36 +++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..74f0e80 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -analogix,need-force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index dae86c4..1f1e594 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- analogix,need-force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a11504b..94968e4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->need_force_hpd)
+ return -ETIM
Re: [PATCH v10 05/17] dt-bindings: add document for analogix display port driver
Hi Rob,
Thanks
- Yakir
On 12/08/2015 11:01 PM, Rob Herring wrote:
On Mon, Dec 07, 2015 at 02:39:07PM +0800, Yakir Yang wrote:
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Acked-by: Rob Herring <r...@kernel.org>
---
Changes in v10: None
Changes in v9: None
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count"&
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high"& "hsync-active-high" & "interlaces"
Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 50 +
.../bindings/display/exynos/exynos_dp.txt | 65 --
2 files changed, 72 insertions(+), 43 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+* "samsung,exynos5-dp"
+* "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ *
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+---
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b 0x1>;
+ interrupts = <10 3>;
+ interrupt-parent = <>;
+ clocks = < 342>;
+ clock-names = "dp";
+
+ phys = <_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2..9905081 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-r
Re: [PATCH v10 08/17] dt-bindings: add document for rockchip variant of analogix_dp
Hi Rob,
On 12/08/2015 11:03 PM, Rob Herring wrote:
On Mon, Dec 07, 2015 at 02:39:34PM +0800, Yakir Yang wrote:
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
I already acked the previous v10 you sent.
Acked-by: Rob Herring <r...@kernel.org>
Ah, I remember it, sorry about the mistaken :-D
Thanks
- Yakir
---
Changes in v10: None
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10.2 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"force-hpd" to indicate this sutiation.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10.2:
- Add the ack from Rob Herring
- Fix the omissive "analogix,need-force-hpd" in Exynos DP document
Changes in v10.1:
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 35 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..4f2ba8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index dae86c4..187a708e 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a11504b..00aee44 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->force_hpd)
+ return -ETIMEDOUT;
+
+ /*
+* The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+
Re: [PATCH v10.1 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Hi Rob,
On 12/09/2015 12:25 PM, Rob Herring wrote:
On Wed, Dec 09, 2015 at 10:10:39AM +0800, Yakir Yang wrote:
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Acked-by: Rob Herring <r...@kernel.org>
Thanks,
---
Changes in v10.1:
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 35 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..4f2ba8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
Forget about this one, will send the new version to fix this, and carry
your ack.
- Yakir
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index dae86c4..187a708e 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a11504b..00aee44 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driv
[PATCH v10 07/17] drm: rockchip: dp: add rockchip platform dp driver
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10:
- Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here (Heiko)
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Remove the empty line at the end of document, and correct the endpoint
numbers in the example DT node, and remove the regulator iomux setting
in driver code while using the pinctl in devicetree instead. (Heiko)
- Add device type declared, cause the previous "platform device type
support (v4 11/16)" already merge into (v5 02/14).
- Implement connector registration code. (Thierry)
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.
Changes in v3:
- Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
and leave "sclk_edp" to analogix dp core driver which name to "dp",
and leave "pclk_edp" to rockchip dp platform driver which name to
"pclk". (Thierry & Heiko)
- Add devicetree binding document. (Heiko)
- Remove "rockchip,panel" DT property, take use of remote point to get panel
node. (Heiko)
- Add the new function point dp_platdata->get_modes() init.
Changes in v2:
- Get panel node with remote-endpoint method, and create devicetree binding
for driver. (Heiko)
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
drivers/gpu/drm/rockchip/Kconfig| 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 442
include/drm/bridge/analogix_dp.h| 1 +
4 files changed, 453 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..686cb49 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_ANALOGIX_DP
+ tristate "Rockchip specific extensions for Analogix DP driver"
+ depends on DRM_ROCKCHIP
+ select DRM_ANALOGIX_DP
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile
b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
new file mode 100644
index 000..2c82a9a
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,442 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy@rock-chips.com>
+ * Yakir Yang <y...@rock-chips.com>
+ * Jeff Chen <jeff.c...@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
+
+/* dp grf register offset */
+#define GRF_SOC_CON60x025c
+#define GRF_EDP_LCD_SEL_MASKBIT(5)
+#define GRF_EDP_SEL_VOP_LIT BIT(5)
+#define GRF_EDP_SEL_VOP_BIG 0
+
+struct rockchip_dp_device {
+ struct drm_device*drm_dev;
+ struct device*dev;
+ struct drm_encoder encoder;
+ struct drm_connector connector;
+ struct drm_display_mode mode;
+
+ struct clk *pclk;
+
[PATCH v10 04/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
Changes in v6: None
Changes in v5:
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
to get the backword timing values. Krzysztof suggest me that driver could use
the "of_property_read_bool" to get backword timing values, but that interfacs
would modify the original drm_display_mode timing directly (whether those
properties exists or not).
Changes in v4:
- Provide backword compatibility with samsung. (Krzysztof)
Changes in v3:
- Dynamic parse video timing info from struct drm_display_mode and
struct drm_display_info. (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 148 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
3 files changed, 103 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 1f66deb..5f542b7 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
-dp->video_info->link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
+dp->video_info.link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1032,6 +1032,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *orig_mode,
+ struct drm_display_mode *mode)
+{
+ struct analogix_dp_device *dp = bridge->driver_private;
+ struct drm_display_info *display_info = >connector->display_info;
+ struct video_info *video = >video_info;
+ struct device_node *dp_node = dp->dev->of_node;
+ int vic;
+
+ /* Input video interlaces & hsync pol & vsync pol */
+ video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+ video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+ video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+ /* Input video dynamic_range & colorimetry */
+ vic = drm_match_cea_mode(mode);
+ if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+ (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR601;
+ } else if (vic) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ } else {
+ video->dynamic_range = VESA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ }
+
+ /* Input vide bpc and color_formats */
+ switch (display_info->bpc) {
+ case 12:
+ video->color_depth = COLOR_12;
+ break;
+ case 10:
+ video->color_depth = COLOR_10;
+ break;
+ case 8:
+ video->color_depth = COLOR_8;
+ break;
+ case 6:
+ video->color_depth = COLOR_6;
+ break;
+ default:
+ video->color_depth = COLOR_8;
+ break;
+ }
+ if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ video->color_space = COLOR_YCBCR444;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ video->color_space = COLOR_YCBCR422;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+ video->color_space = COLOR_RGB;
+ else
+ video->color_space =
[PATCH v10 08/17] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v10: None
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 12/17] drm: bridge: analogix/dp: add some rk3288 special registers setting
RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix compile failed dut to phy_pd_addr variable misspell error
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 76 ++-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 12
2 files changed, 60 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 861097a..21a3287 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -15,6 +15,8 @@
#include
#include
+#include
+
#include "analogix_dp_core.h"
#include "analogix_dp_reg.h"
@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device
*dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+ writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+ writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+ writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+ writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+ writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+ }
+
reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct
analogix_dp_device *dp,
bool enable)
{
u32 reg;
+ u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH0_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH1_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH2_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->
[PATCH v10 11/17] drm: rockchip: vop: add bpc and color mode setting
From: Mark Yao <y...@rock-chips.com>
Add bpc and color mode setting in rockchip_drm_vop driver, so
connector could try to use the edid drm_display_info to config
vop output mode.
Signed-off-by: Mark Yao <y...@rock-chips.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Fix compiled error (Heiko)
- Using the connector display info message to configure eDP driver input
video mode, but hard code CRTC video output mode to RGBaaa.
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25 +++
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 32 ++---
4 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 2c82a9a..3990951 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -180,14 +180,29 @@ static void rockchip_dp_drm_encoder_mode_set(struct
drm_encoder *encoder,
static void rockchip_dp_drm_encoder_prepare(struct drm_encoder *encoder)
{
struct rockchip_dp_device *dp = to_dp(encoder);
+ struct drm_connector *cn = >connector;
+ int ret = -1;
u32 val;
- int ret;
- ret = rockchip_drm_crtc_mode_config(encoder->crtc,
- DRM_MODE_CONNECTOR_eDP,
- ROCKCHIP_OUT_MODE_);
+ /*
+* FIXME(Yakir): driver should configure the CRTC output video
+* mode with the display information which indicated the monitor
+* support colorimetry.
+*
+* But don't know why the CRTC driver seems could only output the
+* RGBaaa rightly. For example, if connect the "innolux,n116bge"
+* eDP screen, EDID would indicated that screen only accepted the
+* 6bpc mode. But if I configure CRTC to RGB666 output, then eDP
+* screen would show a blue picture (RGB888 show a green picture).
+* But if I configure CTRC to RGBaaa, and eDP driver still keep
+* RGB666 input video mode, then screen would works prefect.
+*/
+ if (cn->display_info.color_formats & DRM_COLOR_FORMAT_RGB444)
+ ret = rockchip_drm_crtc_mode_config(encoder->crtc,
+ DRM_MODE_CONNECTOR_eDP,
+ 10, DRM_COLOR_FORMAT_RGB444);
if (ret < 0) {
- dev_err(dp->dev, "Could not set crtc mode config: %d.\n", ret);
+ dev_err(dp->dev, "Could not set crtc mode config (%d)\n", ret);
return;
}
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 80d6fc8..428a3c1 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -215,7 +215,7 @@ static void dw_hdmi_rockchip_encoder_commit(struct
drm_encoder *encoder)
static void dw_hdmi_rockchip_encoder_prepare(struct drm_encoder *encoder)
{
rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_HDMIA,
- ROCKCHIP_OUT_MODE_);
+ 10, DRM_COLOR_FORMAT_RGB444);
}
static struct drm_encoder_helper_funcs dw_hdmi_rockchip_encoder_helper_funcs =
{
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index dc4e5f0..ef1d7fb 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -59,7 +59,7 @@ void rockchip_unregister_crtc_funcs(struct drm_device *dev,
int pipe);
int rockchip_drm_encoder_get_mux_id(struct device_node *node,
struct drm_encoder *encoder);
int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc, int connector_type,
- int out_mode);
+ int bpc, int color);
int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
struct device *dev);
void rockchip_drm_dma_detach_device(struct drm_device *drm_dev,
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..9ef4a1f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1062,14 +1062,40 @@ static const struct drm_plane_funcs vop_plane_funcs = {
int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
int connector_type,
-
[PATCH v10 09/17] phy: Add driver for rockchip Display Port PHY
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v10:
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
BIT(4) -> BIT(20)
Changes in v9:
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.
Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
the exist "grf" syscon already. And rename the example DT node from
"edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
struct" to "static const struct". And correct the input paramters of
devm_phy_create() interfaces. (Heiko)
Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
function, move those code to probe() method. And remove driver .owner
number. (Kishon)
Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
power control. (Heiko)
Changes in v2: None
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 151 ++
3 files changed, 159 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-dp.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)+=
phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)+= phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)+= phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..3cb3bf8
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+ } else {
+ clk_disable_unprepare(dp->phy_24m);
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_OFF);
+ }
[PATCH v10 0/17] Add Analogix Core Display Port Driver
ly. (Heiko) - Add deivce_node at the front of driver, update phy_ops type from "static struct" to "static const struct". And correct the input paramters of devm_phy_create() interfaces. (Heiko) - Split binding doc's from driver changes. (Rob) - Update the rockchip,grf explain in document, and correct the clock required elemets in document. (Rob & Heiko) - Fix compiled error (Heiko) - Using the connector display info message to configure eDP driver input video mode, but hard code CRTC video output mode to RGBaaa. Changes in v4: - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob) - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo) - Create a separate folder for analogix code in bridge/ (Archit) - Update commit message more readable. (Jingoo) - Adjust the order from 05 to 04 - Provide backword compatibility with samsung. (Krzysztof) - Split all DTS changes, and provide backward compatibility. Mark old properties as deprecated but still support them. (Krzysztof) - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob) - Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry) "analogix,color-space" & "analogix,color-depth" & "analogix,link-rate" & "analogix,lane-count"& "analogix,ycbcr-coeff" & "analogix,dynamic-range" & "vsync-active-high"& "hsync-active-high" & "interlaces" - Separate all DTS changes to a separate patch. (Krzysztof) - Remove some deprecated DT properties in rockchip dp document. - Add commit message, and remove the redundant rockchip_dp_phy_init() function, move those code to probe() method. And remove driver .owner number. (Kishon) - Seprate the link-rate and lane-count limit out with the device_type flag. (Thierry) - Take Jingoo suggest, add commit messages. - Call drm_panel_prepare() in .get_modes function, ensure panel should power on before driver try to read edid message. Changes in v3: - Move exynos's video_timing code to analogix_dp-exynos platform driver, add get_modes method to struct analogix_dp_plat_data. (Thierry) - Rename some "samsung*" dts propery to "analogix*". (Heiko) - The link_rate and lane_count shouldn't config to the DT property value directly, but we can take those as hardware limite. For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would like "link-rate = 0x0a" "lane-count = 4". (Thierry) - Dynamic parse video timing info from struct drm_display_mode and struct drm_display_info. (Thierry) - Add devicetree binding documents. (Heiko) - Remove sync pol & colorimetry properies from the new analogix dp driver devicetree binding. (Thierry) - Update the exist exynos dtsi file with the latest DP DT properies. - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform driver which name to "pclk". (Thierry & Heiko) - Add devicetree binding document. (Heiko) - Remove "rockchip,panel" DT property, take use of remote point to get panel node. (Heiko) - Add the new function point dp_platdata->get_modes() init. - Suggest, add rockchip dp phy driver, collect the phy clocks and power control. (Heiko) - Add "analogix,need-force-hpd" to indicate whether driver need foce hpd when hpd detect failed. - move dp hpd detect to connector detect function. - Add edid modes parse support Changes in v2: - Remove new copyright (Jingoo) - Fix compiled failed due to analogix_dp_device misspell - Improved commit message more readable, and avoid using some uncommon style like bellow: (Joe Preches) - retval = exynos_dp_read_bytes_from_i2c(... ...); + retval = + exynos_dp_read_bytes_from_i2c(..); - Get panel node with remote-endpoint method, and create devicetree binding for driver. (Heiko) - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m", leave those clock to rockchip dp phy driver. - Fix compile failed dut to phy_pd_addr variable misspell error Mark Yao (1): drm: rockchip: vop: add bpc and color mode setting Yakir Yang (16): drm: bridge: analogix/dp: split exynos dp driver to bridge directory drm: bridge: analogix/dp: fix some obvious code style drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range dt-bindings: add document for analogix display port driver ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver drm: rockc
[PATCH v10 02/17] drm: bridge: analogix/dp: fix some obvious code style
Fix some obvious alignment problems, like alignment and line
over 80 characters problems, make this easy to be maintained
later.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Resequence this patch after analogix_dp driver have been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
Changes in v4: None
Changes in v3: None
Changes in v2:
- Improved commit message more readable, and avoid using some
uncommon style like bellow: (Joe Preches)
- retval = exynos_dp_read_bytes_from_i2c(...
...);
+ retval =
+ exynos_dp_read_bytes_from_i2c(..);
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 129 ++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 72 ++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 124 ++--
3 files changed, 163 insertions(+), 162 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index cd86413..039aaab 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -61,7 +61,7 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
while (analogix_dp_get_plug_in_status(dp) != 0) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
dev_err(dp->dev, "failed to get hpd plug status\n");
return -ETIMEDOUT;
}
@@ -98,8 +98,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- _block);
+ EDID_EXTENSION_FLAG,
+ _block);
if (retval)
return retval;
@@ -107,7 +107,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
I2C_EDID_DEVICE_ADDR,
+ retval = analogix_dp_read_bytes_from_i2c(dp,
+ I2C_EDID_DEVICE_ADDR,
EDID_HEADER_PATTERN,
EDID_BLOCK_LENGTH,
[EDID_HEADER_PATTERN]);
@@ -138,7 +139,7 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
}
analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- _vector);
+ _vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
analogix_dp_write_byte_to_dpcd(dp,
DP_TEST_EDID_CHECKSUM,
@@ -152,10 +153,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read EDID data */
retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- [EDID_HEADER_PATTERN]);
+ I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH, [EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -166,16 +165,13 @@ static int analogix_dp_read_edid(struct
analogix_dp_device *dp)
return -EIO;
}
- analogix_dp_read_byte_from_dpcd(dp,
- DP_TEST_REQUEST,
- _vector);
+ analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+ _vector);
if (test_vector & DP_TEST_LINK
[PATCH v10 06/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver
After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.
Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the misspell in commit message. (Krzysztof)
Changes in v4:
- Separate all DTS changes to a separate patch. (Krzysztof)
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/exynos5250-arndale.dts | 2 --
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 --
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +---
arch/arm/boot/dts/exynos5250-spring.dts | 4 +---
arch/arm/boot/dts/exynos5420-peach-pit.dts| 4 +---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 --
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +---
7 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..b1790cf 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -124,8 +124,6 @@
{
status = "okay";
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..f30c2db 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -80,8 +80,6 @@
{
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 5cb33ba..b96624b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -236,12 +236,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 7 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts
b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..91881d7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -74,12 +74,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
- samsung,hpd-gpio = < 0 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 0 GPIO_ACTIVE_HIGH>;
};
{
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 35cfb07..2f37c87 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -148,12 +148,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 6 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..f67344f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -93,8 +93,6 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynam
[PATCH v10 03/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.
Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04
Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
directly, but we can take those as hardware limite. For example, RK3288
only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
like "link-rate = 0x0a" "lane-count = 4". (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 039aaab..1f66deb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct
analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+* For DP rev.1.2, Maximum link rate of Main Link lanes
+* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, );
*bandwidth = data;
@@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct
analogix_dp_device *dp,
analogix_dp_get_max_rx_lane_count(dp, >link_train.lane_count);
if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
+ (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 14d20be..9a90a18 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -21,8 +21,9 @@
#define MAX_EQ_LOOP 5
enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
+ LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
+ LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
+ LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
};
enum link_lane_count_type {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v10 01/17] drm: bridge: analogix/dp: split exynos dp driver to bridge directory
On 12/07/2015 02:38 PM, Yakir Yang wrote:
Split the dp core driver from exynos directory to bridge directory,
and rename the core driver to analogix_dp_*, rename the platform
code to exynos_dp.
Beside the new analogix_dp driver would export six hooks.
"analogix_dp_bind()" and "analogix_dp_unbind()"
"analogix_dp_suspned()" and "analogix_dp_resume()"
"analogix_dp_detect()" and "analogix_dp_get_modes()"
The bind/unbind symbols is used for analogix platform driver to connect
with analogix_dp core driver. And the detect/get_modes is used for analogix
platform driver to init the connector.
They reason why connector need register in helper driver is rockchip drm
haven't implement the atomic API, but Exynos drm have implement it, so
there would need two different connector helper functions, that's why we
leave the connector register in helper driver.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
similarity index 50%
rename from drivers/gpu/drm/exynos/exynos_dp_core.c
rename to drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index aee3262..cd86413 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
-static int exynos_dp_remove(struct platform_device *pdev)
+void analogix_dp_unbind(struct device *dev, struct device *master,
+ void *data)
{
- pm_runtime_disable(>dev);
- component_del(>dev, _dp_ops);
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
- return 0;
+ analogix_dp_bridge_disable(dp->bridge);
+ pm_runtime_disable(>dev);
}
+EXPORT_SYMBOL_GPL(analogix_dp_unbind);
Sorry to introduce an compiled error, my test 4.4-rc3 kernel have some
different with linux-next kernel, so i used to write the patches on next
kernel,
and back the changes to my 4.4 kernel to test.
I already found this error when I'm testing, but forget to reserver this
changes
to linux-next kernel, I would send a new version to fix this.
- Yakir
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 16/17] drm: bridge: analogix/dp: add edid modes parse in get_modes method
Display Port monitor could support kinds of mode which indicate
in monitor edid, not just one single display resolution which
defined in panel or devivetree property display timing.
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now driver need to read edid message in .get_modes()
function, so controller must be inited in bind time, so we
need to add controller init back.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Call drm_panel_prepare() in .get_modes function, ensure panel should
power on before driver try to read edid message.
Changes in v3:
- Add edid modes parse support
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 26
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 46 +++---
2 files changed, 42 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 0f42d73..aa1a9be 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -107,7 +107,7 @@ static unsigned char
analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
static int analogix_dp_read_edid(struct analogix_dp_device *dp)
{
- unsigned char edid[EDID_BLOCK_LENGTH * 2];
+ unsigned char *edid = dp->edid;
unsigned int extend_block = 0;
unsigned char sum;
unsigned char test_vector;
@@ -901,12 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_handle_edid(dp);
- if (ret) {
- dev_err(dp->dev, "unable to handle edid\n");
- return;
- }
-
ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
dp->video_info.max_link_rate);
if (ret) {
@@ -947,8 +941,24 @@ EXPORT_SYMBOL_GPL(analogix_dp_detect);
int analogix_dp_get_modes(struct device *dev)
{
struct analogix_dp_device *dp = dev_get_drvdata(dev);
+ struct edid *edid = (struct edid *)dp->edid;
int num_modes = 0;
+ if (dp->plat_data && dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
+ DRM_ERROR("failed to setup the panel\n");
+ return -EINVAL;
+ }
+ }
+
+ if (analogix_dp_handle_edid(dp)) {
+ dev_err(dp->dev, "unable to handle edid\n");
+ return -EINVAL;
+ }
+
+ drm_mode_connector_update_edid_property(dp->connector, edid);
+ num_modes += drm_add_edid_modes(dp->connector, edid);
+
if (dp->plat_data->panel)
num_modes += drm_panel_get_modes(dp->plat_data->panel);
@@ -1309,6 +1319,8 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
phy_power_on(dp->phy);
+ analogix_dp_init_dp(dp);
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index d3c7e0a..2bd2e0d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -20,6 +20,28 @@
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 5
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR 0x50
+#define I2C_E_EDID_DEVICE_ADDR 0x30
+
+#define EDID_BLOCK_LENGTH 0x80
+#define EDID_HEADER_PATTERN0x00
+#define EDID_EXTENSION_FLAG0x7e
+#define EDID_CHECKSUM 0x7f
+
+/* DP_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
+
+/* DP_LANE_COUNT_SET */
+#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
+
+/* DP_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
+#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
+
enum link_rate_type {
LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
[PATCH v10 15/17] drm: bridge: analogix/dp: move hpd detect to connector detect function
This change just make a little clean to make code more like
drm core expect, move hdp detect code from bridge->enable(),
and place them into connector->detect().
Note: Gustavo Padovan try to remove the controller and phy
power on function in bind time at bellow commit:
drm/exynos: do not start enabling DP at bind() phase
But for now the connector status don't hardcode to connected,
need to operate dp phy in .detect function, so we need to revert
parts if Gustavo Padovan's changes, add phy poweron
function in bind time.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10:
- Revert parts of Gustavo Padovan's changes in commit:
drm/exynos: do not start enabling DP at bind() phase
Add dp phy poweron function in bind time.
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Take Jingoo suggest, add commit messages.
Changes in v3:
- move dp hpd detect to connector detect function.
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 +++--
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 94968e4..0f42d73 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -901,12 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = analogix_dp_detect_hpd(dp);
- if (ret) {
- /* Cable has been disconnected, we're done */
- return;
- }
-
ret = analogix_dp_handle_edid(dp);
if (ret) {
dev_err(dp->dev, "unable to handle edid\n");
@@ -941,6 +935,11 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
enum drm_connector_status analogix_dp_detect(struct device *dev, bool force)
{
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
+
+ if (analogix_dp_detect_hpd(dp))
+ return connector_status_disconnected;
+
return connector_status_connected;
}
EXPORT_SYMBOL_GPL(analogix_dp_detect);
@@ -1308,6 +1307,8 @@ int analogix_dp_bind(struct device *dev, struct
drm_device *drm_dev,
pm_runtime_enable(dev);
+ phy_power_on(dp->phy);
+
ret = devm_request_irq(>dev, dp->irq, analogix_dp_irq_handler,
irq_flags, "analogix-dp", dp);
if (ret) {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 10/17] dt-bindings: add document for rockchip dp phy
Add dt binding documentation for rockchip display port PHY.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v10: None
Changes in v9: None
Changes in v8:
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Simplify the commit message. (Kishon)
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Update the rockchip,grf explain in document, and correct the clock required
elemets in document. (Rob & Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/phy/rockchip-dp-phy.txt| 22 ++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 000..00902cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip Soc Seroes Display Port PHY
+
+
+Required properties:
+- compatible : should be one of the following supported values:
+- "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ rockchip,grf = <>;
+ clocks = < SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 17/17] drm: bridge: analogix/dp: expand the look time for waiting AUX CH reply
After test on rockchiop platform, i found sometims driver would failed
at reading EDID message. After debugging more, i found that it's okay
to read_a byte from i2c, but it would failed at AUX transcation if we
try to ready multi-bytes from i2c.
Driver just can't received the AUX CH reply command, even no AUX error
code. I may guess that the AUX wait time is not enough, so I try to
expand the AUX wait time, and i do see this could fix the EDID read
failed at rockchip platform.
And I thought that expand the wait time won't hurt Exynos platform too
much, cause Exynos didn't have this problem, then driver would received
the reply command very soon, so no more additional wait time would bring
to Exynos platform.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index c7e2959..dc376bd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -482,7 +482,7 @@ int analogix_dp_start_aux_transaction(struct
analogix_dp_device *dp)
reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
while (!(reg & RPLY_RECEIV)) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (DP_TIMEOUT_LOOP_COUNT * 10 < timeout_loop) {
dev_err(dp->dev, "AUX CH command reply failed!\n");
return -ETIMEDOUT;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 36 +++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..74f0e80 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -analogix,need-force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index dae86c4..1f1e594 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- analogix,need-force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a11504b..94968e4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->need_force_hpd)
+ return -ETIMEDOUT;
+
+ /*
+* The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+* will not work, so we need to give a force hpd action to
+* set HPD_STATUS manually.
+*/
+ dev_dbg(dp->dev, "faile
[PATCH v10 13/17] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288
There are some IP limit on rk3288 that only support 4 physical lanes
of 2.7/1.6 Gbps/lane, so seprate them out by device_type flag.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10:
- Remove the surplus "plat_data" check. (Heiko)
- switch (dp->plat_data && dp->plat_data->dev_type) {
+ switch (dp->plat_data->dev_type) {
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Seprate the link-rate and lane-count limit out with the device_type
flag. (Thierry)
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 33 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 +--
2 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5f542b7..a11504b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
-dp->video_info.link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
+dp->video_info.max_link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1158,16 +1158,25 @@ static int analogix_dp_dt_parse_pdata(struct
analogix_dp_device *dp)
struct device_node *dp_node = dp->dev->of_node;
struct video_info *video_info = >video_info;
- if (of_property_read_u32(dp_node, "samsung,link-rate",
-_info->link_rate)) {
- dev_err(dp->dev, "failed to get link-rate\n");
- return -EINVAL;
- }
-
- if (of_property_read_u32(dp_node, "samsung,lane-count",
-_info->lane_count)) {
- dev_err(dp->dev, "failed to get lane-count\n");
- return -EINVAL;
+ switch (dp->plat_data->dev_type) {
+ case RK3288_DP:
+ /*
+* Like Rk3288 DisplayPort TRM indicate that "Main link
+* containing 4 physical lanes of 2.7/1.62 Gbps/lane".
+*/
+ video_info->max_link_rate = 0x0A;
+ video_info->max_lane_count = 0x04;
+ break;
+ case EXYNOS_DP:
+ /*
+* NOTE: those property parseing code is used for
+* providing backward compatibility for samsung platform.
+*/
+ of_property_read_u32(dp_node, "samsung,link-rate",
+_info->max_link_rate);
+ of_property_read_u32(dp_node, "samsung,lane-count",
+_info->max_lane_count);
+ break;
}
return 0;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index e37cef6..e6f8243 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -129,8 +129,8 @@ struct video_info {
enum color_coefficient ycbcr_coeff;
enum color_depth color_depth;
- enum link_rate_type link_rate;
- enum link_lane_count_type lane_count;
+ enum link_rate_type max_link_rate;
+ enum link_lane_count_type max_lane_count;
};
struct link_train {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 05/17] dt-bindings: add document for analogix display port driver
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count"&
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high"& "hsync-active-high" & "interlaces"
Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 50 +
.../bindings/display/exynos/exynos_dp.txt | 65 --
2 files changed, 72 insertions(+), 43 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+* "samsung,exynos5-dp"
+* "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ *
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+---
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b 0x1>;
+ interrupts = <10 3>;
+ interrupt-parent = <>;
+ clocks = < 342>;
+ clock-names = "dp";
+
+ phys = <_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2..9905081 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
- -samsung,ycbcr-coeff:
- YCbCr co-efficients for input video.
-
[RFC PATCH v1 1/2] drm: Add Content Protection properties to drm
From: Sean Paul <seanp...@chromium.org>
Add new standard connector properties to track whether content protection
(ex: hdcp) is desired by userspace. There are two properties involved,
"Content Protection" and "Content Protection KSV".
The "Content Protection" property allows userspace to request protection
on a connector. Set "Desired" to enable, "Undesired" to disable.
The "Content Protection KSV" property reflects the current state of
protection. If the KSV is 0, the connection is not protected. Once the
driver has enabled protection, it will update the the value with the KSV
(or similarly unique identifier, if not using HDCP) of the first-hop
device (sink or repeater).
Signed-off-by: Sean Paul <seanp...@chromium.org>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
drivers/gpu/drm/drm_crtc.c | 21 +
drivers/gpu/drm/drm_sysfs.c | 46 +
include/drm/drm_crtc.h | 3 +++
include/uapi/drm/drm_mode.h | 4
4 files changed, 74 insertions(+)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 32dd134..de7ae6a 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -78,6 +78,13 @@ static const struct drm_prop_enum_list
drm_plane_type_enum_list[] = {
{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
};
+static struct drm_prop_enum_list drm_cp_enum_list[] = {
+ { DRM_MODE_CONTENT_PROTECTION_UNDESIRED, "Undesired" },
+ { DRM_MODE_CONTENT_PROTECTION_DESIRED, "Desired" },
+};
+
+DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
+
/*
* Optional properties
*/
@@ -1470,6 +1477,20 @@ static int drm_mode_create_standard_properties(struct
drm_device *dev)
return -ENOMEM;
dev->mode_config.prop_mode_id = prop;
+ prop = drm_property_create_enum(dev, 0,
+ "Content Protection", drm_cp_enum_list,
+ ARRAY_SIZE(drm_cp_enum_list));
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.content_protection_property = prop;
+
+ prop = drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE,
+"Content Protection KSV", 0,
+0xFF);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.content_protection_ksv_property = prop;
+
return 0;
}
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index c75f022..dc122b8 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -248,6 +248,48 @@ static ssize_t enabled_show(struct device *device,
"disabled");
}
+static ssize_t content_protection_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct drm_connector *connector = to_drm_connector(device);
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+ uint64_t cp;
+ int ret;
+
+ prop = dev->mode_config.content_protection_property;
+ if (!prop)
+ return 0;
+
+ ret = drm_object_property_get_value(>base, prop, );
+ if (ret)
+ return 0;
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ drm_get_content_protection_name((int)cp));
+}
+
+static ssize_t content_protection_ksv_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct drm_connector *connector = to_drm_connector(device);
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+ uint64_t ksv;
+ int ret;
+
+ prop = dev->mode_config.content_protection_ksv_property;
+ if (!prop)
+ return 0;
+
+ ret = drm_object_property_get_value(>base, prop, );
+ if (ret)
+ return 0;
+
+ return snprintf(buf, PAGE_SIZE, "%llx\n", ksv);
+}
+
static ssize_t edid_show(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr, char *buf, loff_t off,
size_t count)
@@ -399,12 +441,16 @@ static DEVICE_ATTR_RW(status);
static DEVICE_ATTR_RO(enabled);
static DEVICE_ATTR_RO(dpms);
static DEVICE_ATTR_RO(modes);
+static DEVICE_ATTR_RO(content_protection);
+static DEVICE_ATTR_RO(content_protection_ksv);
static struct attribute *connector_dev_attrs[] = {
_attr_status.attr,
_attr_enabled.attr,
_attr_dpms.attr,
_attr_modes.attr,
+ _attr_content_protection.attr,
+ _attr_content_protection_ksv.attr,
NULL
};
diff --git a/include/drm/drm_crtc.h b/
[RFC PATCH v1 0/2] Add basic HDCP function support for dw_hdmi driver
Hi, This series try to add the basic HDCP function support for bridge dw_hdmi driver. Beside this series also resend the patch from Sean Paul that try to introduce a common way for userspace to operate the HDCP function. Userspace could chose to enable/disable the HDCP function throught the new standard properties "Content Protection", and driver would reflect the HDCP auth status to "Content Protection KSV" property. Beside this series also base on Vladimir Zapolskiy's patch that help to introduce DDC support for dw_hdmi driver. [Resend] Sean Pual: https://patchwork.kernel.org/patch/7279801 [Rebased on] Vladimir Zapolskiy: https://patchwork.kernel.org/patch/7279801 Thanks - Yakir Sean Paul (1): drm: Add Content Protection properties to drm Yakir Yang (1): drm: bridgw/dw_hdmi: add basic hdmi hdcp driver drivers/gpu/drm/bridge/dw_hdmi.c | 355 --- drivers/gpu/drm/bridge/dw_hdmi.h | 20 +++ drivers/gpu/drm/drm_crtc.c | 21 +++ drivers/gpu/drm/drm_sysfs.c | 46 + include/drm/bridge/dw_hdmi.h | 17 ++ include/drm/drm_crtc.h | 3 + include/uapi/drm/drm_mode.h | 4 + 7 files changed, 447 insertions(+), 19 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[RFC PATCH v1 2/2] drm: bridgw/dw_hdmi: add basic hdmi hdcp driver
Userspace could set the drm property "Content Protection"
to "Desired", and then driver would start to authenticate.
If the authentication successed, then the "Content Protection
KSV" would be write with the right HDCP KSV KEY, and enable
the HDCP encryption.
Besides driver export an interface for specific platform
driver that used for passing the encrypted HDCP key.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
drivers/gpu/drm/bridge/dw_hdmi.c | 355 ---
drivers/gpu/drm/bridge/dw_hdmi.h | 20 +++
include/drm/bridge/dw_hdmi.h | 17 ++
3 files changed, 373 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 2c4dfc8..593a5b9 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -53,6 +53,13 @@ enum hdmi_datamap {
YCbCr422_12B = 0x12,
};
+enum dw_hdmi_hdcp_state {
+ DW_HDMI_HDCP_STATE_DISABLED,
+ DW_HDMI_HDCP_STATE_AUTH_START,
+ DW_HDMI_HDCP_STATE_AUTH_DONE,
+ DW_HDMI_HDCP_STATE_ENCRY_EN,
+};
+
static const u16 csc_coeff_default[3][4] = {
{ 0x2000, 0x, 0x, 0x },
{ 0x, 0x2000, 0x, 0x },
@@ -97,7 +104,6 @@ struct hdmi_data_info {
unsigned int enc_color_depth;
unsigned int colorimetry;
unsigned int pix_repet_factor;
- unsigned int hdcp_enable;
struct hdmi_vmode video_mode;
};
@@ -154,6 +160,14 @@ struct dw_hdmi {
unsigned int audio_n;
bool audio_enable;
+ /* this mutex is used for sync hdcp key content */
+ struct mutex hdcp_key_mutex;
+ struct dw_hdmi_hdcp_key_1x hdcp_key;
+ bool is_hdcp_key_present;
+
+ struct mutex hdcp_state_mutex;
+ enum dw_hdmi_hdcp_state hdcp_state;
+
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
u8 (*read)(struct dw_hdmi *hdmi, int offset);
};
@@ -1087,23 +1101,195 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
return 0;
}
-static void hdmi_tx_hdcp_config(struct dw_hdmi *hdmi)
+static int hdmi_hdcp_wait_rmsts_ok(struct dw_hdmi *hdmi)
{
- u8 de;
+ unsigned long timeout;
- if (hdmi->hdmi_data.video_mode.mdataenablepolarity)
- de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH;
- else
- de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW;
+ timeout = jiffies + msecs_to_jiffies(100);
+ while ((hdmi_readb(hdmi, HDMI_HDCPREG_RMSTS) & DPK_WR_OK_STS) == 0) {
+ if (time_after(jiffies, timeout))
+ return -EBUSY;
+ usleep_range(10, 15);
+ }
+
+ return 0;
+}
+
+static int _hdmi_write_hdcp_key(struct dw_hdmi *hdmi)
+{
+ struct dw_hdmi_hdcp_key_1x *key = >hdcp_key;
+ int i, j;
+ int ret;
+
+ /* Disable decryption logic */
+ hdmi_writeb(hdmi, 0, HDMI_HDCPREG_RMCTL);
+ ret = hdmi_hdcp_wait_rmsts_ok(hdmi);
+ if (ret)
+ return ret;
+
+ /* The useful data in ksv should be 5 byte */
+ for (i = 4; i >= 0; i--)
+ hdmi_writeb(hdmi, key->ksv[i], HDMI_HDCPREG_DPK0 + i);
+
+ ret = hdmi_hdcp_wait_rmsts_ok(hdmi);
+ if (ret)
+ return ret;
+
+ /* Enable decryption logic */
+ hdmi_writeb(hdmi, 1, HDMI_HDCPREG_RMCTL);
+ hdmi_writeb(hdmi, key->seed[1], HDMI_HDCPREG_SEED1);
+ hdmi_writeb(hdmi, key->seed[0], HDMI_HDCPREG_SEED0);
+
+ /* Write encrypt device private key */
+ for (i = 0; i < DW_HDMI_HDCP_DPK_LEN - 6; i += 7) {
+ for (j = 6; j >= 0; j--)
+ hdmi_writeb(hdmi, key->device_key[i + j],
+ HDMI_HDCPREG_DPK0 + j);
+ ret = hdmi_hdcp_wait_rmsts_ok(hdmi);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void _hdmi_close_hdcp_auth(struct dw_hdmi *hdmi)
+{
+ WARN_ON(!mutex_is_locked(>hdcp_state_mutex));
+
+ /* Disable hdcp encryption */
+ hdmi_modb(hdmi, HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE,
+ HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK, HDMI_A_HDCPCFG1);
- /* disable rx detect */
+ /* Disable the RX detect */
hdmi_modb(hdmi, HDMI_A_HDCPCFG0_RXDETECT_DISABLE,
HDMI_A_HDCPCFG0_RXDETECT_MASK, HDMI_A_HDCPCFG0);
- hdmi_modb(hdmi, de, HDMI_A_VIDPOLCFG_DATAENPOL_MASK, HDMI_A_VIDPOLCFG);
+ hdmi->hdcp_state = DW_HDMI_HDCP_STATE_DISABLED;
+}
+
+static void _hdmi_start_hdcp_auth(struct dw_hdmi *hdmi)
+{
+ WARN_ON(!mutex_is_locked(>hdcp_state_mutex));
+
+ /* Make sure RX detect is off before we start */
+ _hdmi_close_hdcp_auth(hdmi);
+
+ /* Enable the RX detect; expect an interrupt after this */
+ hdmi_modb(hdmi, HDMI_A_HDCPCFG0_RXDETECT_ENABLE,
+
Re: [PATCH v8 0/17] Add Analogix Core Display Port Driver
Hi Jingoo & Exynos DRM Maintainers (Inki & Andrzej & Joonyoung) & Bridge
Maintainers (Thierry?):
Ping...
The front part of this series (exynos_dp to analogix_dp) haven't received
more comments in the pasted several months. Is it difficult to carry those
patches without new changes but rebased on the latest kernel again and
again. If you thought those patches is fine, it would be very grateful to
give some ACKs to those changes.
Thanks,
- Yakir
On 10/28/2015 04:15 PM, Yakir Yang wrote:
Hi all,
The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
share the same IP, so a lot of parts can be re-used. I split the common
code into bridge directory, then rk3288 and exynos only need to keep
some platform code. Cause I can't find the exact IP name of exynos dp
controller, so I decide to name dp core driver with "analogix" which I
find in rk3288 eDP TRM
But there are still three light registers setting differents bewteen
exynos and rk3288.
1. RK3288 have five special pll resigters which not indicata in exynos
dp controller.
2. The address of DP_PHY_PD(dp phy power manager register) are different
between rk3288 and exynos.
3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
register).
This series have been well tested on Rockchip platform with eDP panel on
Jerry Chromebook and Display Port Monitor on RK3288 board. Also I have
tested on Samsung Snow and Peach Pit Chromebooks, and thanks to Javier@Samsung
help to retest the whole series on Samsung Exynos5800 Peach Pi Chromebook,
glad to say that things works rightlly.
Thanks,
- Yakir
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
- Modify the commit subject name. (Heiko)
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
- Simplify the commit message. (Kishon)
Changes in v6:
- Fix the wrong code in previous series, and test on Samsung snow Chromebook
successfully, here are the detail changes:
=>
- if (!dp->panel && !dp->bridge) {
+ if (!dp->panel && !dp->ptn_bridge) {
ret = exynos_dp_dt_parse_panel(dp);
if (ret)
=>
+ encoder->bridge = bridge;
bridge->driver_private = dp;
bridge->encoder = encoder;
bridge->funcs = _dp_bridge_funcs;
ret = drm_bridge_attach(drm_dev, bridge);
- Fix the Kconfig recursive dependency (Javier)
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the check condition of gpio_is_valid when driver try to get
the "hpd-gpios" DT propery. (Heiko)
- Move the platform attach callback in the front of core driver bridge
attch function. Cause once platform failed at attach, core driver should
still failed, so no need to init connector before platform attached
(Krzysztof)
- Keep code style no changes with the previous exynos_dp_code.c in this
patch, and update commit message about the new export symbol (Krzysztof)
- Gather the device type patch (v4 11/16) into this one. (Krzysztof)
- leave out the connector registration to analogix platform driver. (Thierry)
- Resequence this patch after analogix_dp driver have been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
to get the backword timing values. Krzysztof suggest me that driver could use
the "of_property_read_bool" to get backword timing values, but that interfacs
would modify the original drm_display_mode timing directly (whether those
properties exists or not).
- Correct the misspell in commit message. (Krzysztof)
- Remove the empty line at the end of document, and correct the endpoint
numbers in the example DT node, and remove the regulator iomux setting
in driver code while using the pinctl in devicetree instead. (Heiko)
- Add device type declared, cause the previous "platform device type
support (v4 11/16)" already merge into
[PATCH v10 10/17] phy: Add driver for rockchip Display Port PHY
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v10:
- Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK (Brian)
BIT(4) -> BIT(20)
Changes in v9:
- Removed the unused the variable "res" in probe function. (Heiko)
- Removed the unused head file.
Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
the exist "grf" syscon already. And rename the example DT node from
"edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
struct" to "static const struct". And correct the input paramters of
devm_phy_create() interfaces. (Heiko)
Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
function, move those code to probe() method. And remove driver .owner
number. (Kishon)
Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
power control. (Heiko)
Changes in v2: None
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 151 ++
3 files changed, 159 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-dp.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)+=
phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)+= phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)+= phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..3cb3bf8
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+ } else {
+ clk_disable_unprepare(dp->phy_24m);
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_
Re: [PATCH v9 10/17] phy: Add driver for rockchip Display Port PHY
Hi Brian,
Thank you for debugging, and fell sorry for the delay reply
On 11/06/2015 07:45 AM, Brian Norris wrote:
Hi,
A few updates:
On Tue, Nov 03, 2015 at 05:13:48PM -0800, Brian Norris wrote:
On Wed, Nov 04, 2015 at 08:48:38AM +0800, Yakir Yang wrote:
On 11/03/2015 12:38 PM, Brian Norris wrote:
On Thu, Oct 29, 2015 at 09:58:38AM +0800, Yakir Yang wrote:
(FYI, I came across this by inspection when comparing Heiko's
'somewhat-stable' branch [1] with this series. The former brings up eDP
fine on veyron-jaq, whereas this one doesn't yet, even with the above
change. Still debugging the issue.)
Some time after the above comment, I managed to kill the panel on my
Jaq :( I think the wiring around the hinge was a bit flaky, and it
finally went out for good.
Hmm... I'm not sure whether your eDP screen have the hotplug signal, so I
I believe hotplug is hooked up but...
think you can try to add "analogix,force-hpd" flag into
rk3288-veyron-jaq.dts
{
analogix,need-force-hpd;
}
...already tried, just in case. No luck.
However, now when testing a different Jaq device, now this series +
Heiko's DTS updates + the "analogix,force-hpd" (i.e., [1]) works fine,
modulo a few log warnings, some of which are probably expected (for
instance, I believe the EDID is known not-so-helpful). Snippets:
[3.170176] rockchip-dp ff97.dp: AUX CH command reply failed!
[3.178058] rockchip-dp ff97.dp: AUX CH command reply failed!
[3.184166] rockchip-dp ff97.dp: unable to handle edid
and later:
[3.953300] rockchip-dp ff97.dp: EDID data does not include any
extensions.
[3.966731] rockchip-dp ff97.dp: EDID data does not include any
extensions.
[3.979409] rockchip-dp ff97.dp: EDID data does not include any
extensions.
[3.998730] rockchip-dp ff97.dp: Link Training Clock Recovery success
[4.007046] rockchip-dp ff97.dp: Link Training success!
[4.115040] rockchip-dp ff97.dp: Timeout of video streamclk ok
[4.121211] rockchip-dp ff97.dp: unable to config video
[4.127616] rockchip-dp ff97.dp: EDID data does not include any
extensions.
So, I'll chalk that earlier failure up to a hardware failure (or
possibly a still yet-undiagnosed hardware difference; my new Jaq has
some small differences from the previous unit).
Yeah, I have saw this failed on some chromebook too, but finally it transmit
successfully, so I guess this maybe caused by hardware different.
Also, it's still not real clear why HPD isn't working upstream (and we
have to use the "force-hpd" property), when it appears to work on our
downstream Chrome OS tree.
I have tested that driver do receive the hpd interrupt when i
plugged/unplugged the
eDP screen, and at that time driver would read the HPD connected status
rightly.
But I haven't fingered out why driver couldn't get the right HPD status
in the early time,
need debug more...
Finally, I'll leave you with some small bits I've noticed from exploring
this issue on Jaq:
* The Chrome OS driver for this IP has a much longer timeout in (the
equivalent of) analogix_dp_detect_hpd; it polls in 10-20 ms intervals
(rather than 10-11 us) and takes something around 60 to 120 ms to
notice the panel.
Thanks, I have noticed it too, also I try to expand the hotplug timeout,
but Jingoo
suggested not to do that, cause it would bring external delay on Exynos
platform.
Besides from what Heiko reply, expand this delay time wouldn't give any help
on those Jaq no display case, delay the panel power up time would be the
right
way to fix that, so maybe no need to expand the hotpulg timeout.
- Thanks
* AFAICT, the Chrome OS driver never actually used the HPD interrupt;
it was only polling the HPD status bit. So I can't claim that the
functionality that Yakir is supporting here has ever been tested on
these platforms. (Now, I'm not sure this is extremely important,
since we still can fall back to polled status checks; see
drm_kms_helper_poll_init().)
That's all I've got for now.
Regards,
Brian
[1] https://github.com/mmind/linux-rockchip/commits/tmp/analogixdp-veyron
plus this diff:
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 5c97e3153526..e77ae4c5531e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -88,6 +88,18 @@
};
};
+ {
+ power-supply = <_regulator>;
+};
+
+ {
+ power-supply = <_regulator>;
+};
+
+ {
+ analogix,need-force-hpd;
+};
+
{
pinctrl-names = "default";
pinctrl-0 = <_int_l _1 _2>;
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
index c82c22f3d0e1..994189f49db5 100644
--- a/drivers/phy/phy-rockchip-dp.c
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -22,7 +22,7 @@
#define GRF_SOC_CON12 0x0274
-#defin
Re: [PATCH v9 10/17] phy: Add driver for rockchip Display Port PHY
Hi Brain,
On 11/03/2015 12:38 PM, Brian Norris wrote:
Hi Yakir,
On Thu, Oct 29, 2015 at 09:58:38AM +0800, Yakir Yang wrote:
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Reviewed-by: Heiko Stuebner<he...@sntech.de>
Signed-off-by: Yakir Yang<y...@rock-chips.com>
---
...
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..f3e0058
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,151 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang<ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(4)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
Why are the above two macros the same? Judging by the RK3288 manual and
other downstream drivers, it seems like you want the _MASK one to be
shifted left by 16 (i.e., BIT(20)).
Oops, yes, you're right, it should be BIT(20), thanks for the catch.
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
...
+ ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
+ GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK);
IOW, the above is writing:
BIT(4) | BIT(4)
whereas I think you want:
BIT(4) | BIT(20)
+ if (ret != 0) {
+ dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
+ return ret;
+ }
+
...
(FYI, I came across this by inspection when comparing Heiko's
'somewhat-stable' branch [1] with this series. The former brings up eDP
fine on veyron-jaq, whereas this one doesn't yet, even with the above
change. Still debugging the issue.)
Hmm... I'm not sure whether your eDP screen have the hotplug signal, so I
think you can try to add "analogix,force-hpd" flag into
rk3288-veyron-jaq.dts
{
analogix,need-force-hpd;
}
If that changes couldn't fix the problem, guess you may need max the panel
power up delay time which pointed by Heiko. Like:
Thanks,
- Yakir
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 4fa5f69..546a506 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -82,6 +82,13 @@ static int analogix_dp_detect_hpd(struct
analogix_dp_device *dp)
*/
dev_dbg(dp->dev, "failed to get hpd plug status, try to force
hpd\n");
+ /*
+* Hotplug signal would indicate the right time to operate
+* panel after poweron, but if the hotplug is missing, then
+* panel would need wait hundreds of milliseconds at here.
+*/
+ mdelay(100);
+
analogix_dp_force_hpd(dp);
if (analogix_dp_get_plug_in_status(dp) != 0) {
Brian
[1]https://github.com/mmind/linux-rockchip/tree/devel/somewhat-stable
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v10 09/17] dt-bindings: add document for rockchip variant of analogix_dp
On 11/01/2015 02:37 AM, Rob Herring wrote:
On Sat, Oct 31, 2015 at 1:42 AM, Yakir Yang <y...@rock-chips.com> wrote:
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Thanks,
- Yakir
---
Changes in v10:
- Removed the duplicated signed-of.
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v9 09/17] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v9 09/17] dt-bindings: add document for rockchip variant of analogix_dp
On 10/31/2015 02:30 PM, Yakir Yang wrote:
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Sorry about the duplicate signed-off, I would send a new version now.
---
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 09/17] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v10:
- Removed the duplicated signed-of.
Changes in v9:
- Document more details for 'ports' property.
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 91 ++
1 file changed, 91 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..dae86c4
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,91 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: there are 2 port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+Port 0: contained 2 endpoints, connecting to the ouput of vop.
+Port 1: contained 1 endpoint, connecting to the input of panel.
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v8 11/17] dt-bindings: add document for rockchip dp phy
On 10/31/2015 12:42 AM, Rob Herring wrote:
On Wed, Oct 28, 2015 at 3:31 AM, Yakir Yang <y...@rock-chips.com> wrote:
Add dt binding documentation for rockchip display port PHY.
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Thanks,
- Yakir
---
Changes in v8:
- Remove the specific address in the example node name. (Heiko)
Changes in v7:
- Simplify the commit message. (Kishon)
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Update the rockchip,grf explain in document, and correct the clock required
elemets in document. (Rob & Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/phy/rockchip-dp-phy.txt| 22 ++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 000..00902cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip Soc Seroes Display Port PHY
+
+
+Required properties:
+- compatible : should be one of the following supported values:
+- "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+ compatible = "rockchip,rk3288-dp-phy";
+ rockchip,grf = <>;
+ clocks = < SCLK_EDP_24M>;
+ clock-names = "24m";
+ #phy-cells = <0>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v8 09/17] dt-bindings: add document for rockchip variant of analogix_dp
Hi Rob, On 10/31/2015 12:46 AM, Rob Herring wrote: On Wed, Oct 28, 2015 at 3:28 AM, Yakir Yang <y...@rock-chips.com> wrote: Rockchip DP driver is a helper driver of analogix_dp coder driver, so most of the DT property should be descriped in analogix_dp document. Reviewed-by: Heiko Stuebner <he...@sntech.de> Signed-off-by: Yakir Yang <y...@rock-chips.com> --- Looks mostly fine to me. [...] +- rockchip,grf: this soc should set GRF regs, so need get grf here. + +- ports: contain a port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. Please document that you have 2 ports 0 and 1, port0 has 2 endpoints for ? and port1 has 1 endpoint connected to a panel(or another bridge). Otherwise that is only evident from the example. Okay, looks great. Thanks, - Yakir Rob -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v9 15/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.
Tested-by: Heiko Stuebner <he...@sntech.de>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 4 ++-
.../bindings/display/exynos/exynos_dp.txt | 1 +
.../display/rockchip/analogix_dp-rockchip.txt | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 36 +++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 ++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 9 ++
6 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..74f0e80 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
from general PHY binding: Should be "dp".
Optional properties for dp-controller:
+ -analogix,need-force-hpd:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don't have hpd signal.
-hpd-gpios:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
*
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
-
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
---
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@ For the below properties, please refer to Analogix DP binding
document:
-phys (required)
-phy-names (required)
-hpd-gpios (optional)
+ -analogix,need-force-hpd (optional)
-video interfaces (optional)
Deprecated properties for DisplayPort:
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index ec93917..be18388 100644
---
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -31,6 +31,7 @@ For the below properties, please refer to Analogix DP binding
document:
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
+- analogix,need-force-hpd (optional)
---
Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 563ffb1d..3842dbd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+* Some edp screen do not have hpd signal, so we can't just
+* return failed when hpd plug in detect failed, DT property
+* "need-force-hpd" would indicate whether driver need this.
+*/
+ if (!dp->need_force_hpd)
+ return -ETIMEDOUT;
+
+ /*
+* The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+* will not work, so we need to give a force hpd action to
+* set HPD_STATUS manually.
+*/
+ dev_dbg(dp->dev, "
[PATCH v8 06/17] dt-bindings: add document for analogix display port driver
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8:
- Correct the right document path of display-timing.txt (Heiko)
- Correct the misspell of 'from' to 'frm'. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Split all DTS changes, and provide backward compatibility. Mark old
properties as deprecated but still support them. (Krzysztof)
- Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
- Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry)
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count"&
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high"& "hsync-active-high" & "interlaces"
Changes in v3:
- Add devicetree binding documents. (Heiko)
- Remove sync pol & colorimetry properies from the new analogix dp driver
devicetree binding. (Thierry)
- Update the exist exynos dtsi file with the latest DP DT properies.
Changes in v2: None
.../bindings/display/bridge/analogix_dp.txt| 50 +
.../bindings/display/exynos/exynos_dp.txt | 65 --
2 files changed, 72 insertions(+), 43 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
new file mode 100644
index 000..7659a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+* "samsung,exynos5-dp"
+* "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+ *
Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+---
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b 0x1>;
+ interrupts = <10 3>;
+ interrupt-parent = <>;
+ clocks = < 342>;
+ clock-names = "dp";
+
+ phys = <_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 7a3a9cd..9905081 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
- -samsung,ycbcr-coeff:
- YCbCr co-efficients for input video.
- COLOR_Y
[PATCH v8 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8: None
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
Changes in v6: None
Changes in v5:
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
to get the backword timing values. Krzysztof suggest me that driver could use
the "of_property_read_bool" to get backword timing values, but that interfacs
would modify the original drm_display_mode timing directly (whether those
properties exists or not).
Changes in v4:
- Provide backword compatibility with samsung. (Krzysztof)
Changes in v3:
- Dynamic parse video timing info from struct drm_display_mode and
struct drm_display_info. (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 148 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
3 files changed, 103 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 96afb67..6307060 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
-dp->video_info->link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
+dp->video_info.link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1030,6 +1030,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge
*bridge)
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *orig_mode,
+ struct drm_display_mode *mode)
+{
+ struct analogix_dp_device *dp = bridge->driver_private;
+ struct drm_display_info *display_info = >connector->display_info;
+ struct video_info *video = >video_info;
+ struct device_node *dp_node = dp->dev->of_node;
+ int vic;
+
+ /* Input video interlaces & hsync pol & vsync pol */
+ video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+ video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+ video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+ /* Input video dynamic_range & colorimetry */
+ vic = drm_match_cea_mode(mode);
+ if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+ (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR601;
+ } else if (vic) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ } else {
+ video->dynamic_range = VESA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ }
+
+ /* Input vide bpc and color_formats */
+ switch (display_info->bpc) {
+ case 12:
+ video->color_depth = COLOR_12;
+ break;
+ case 10:
+ video->color_depth = COLOR_10;
+ break;
+ case 8:
+ video->color_depth = COLOR_8;
+ break;
+ case 6:
+ video->color_depth = COLOR_6;
+ break;
+ default:
+ video->color_depth = COLOR_8;
+ break;
+ }
+ if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ video->color_space = COLOR_YCBCR444;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ video->color_space = COLOR_YCBCR422;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+ video->color_space = COLOR_RGB;
+ else
+ video->color_space = COLOR_RGB;
+
+ /*
+* NOTE:
[PATCH v8 0/17] Add Analogix Core Display Port Driver
correct the input paramters of devm_phy_create() interfaces. (Heiko) - Split binding doc's from driver changes. (Rob) - Update the rockchip,grf explain in document, and correct the clock required elemets in document. (Rob & Heiko) - Fix compiled error (Heiko) - Using the connector display info message to configure eDP driver input video mode, but hard code CRTC video output mode to RGBaaa. Changes in v4: - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob) - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo) - Create a separate folder for analogix code in bridge/ (Archit) - Update commit message more readable. (Jingoo) - Adjust the order from 05 to 04 - Provide backword compatibility with samsung. (Krzysztof) - Split all DTS changes, and provide backward compatibility. Mark old properties as deprecated but still support them. (Krzysztof) - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob) - Deprecated some properties which could parsed from Edid/Mode/DPCD. (Thierry) "analogix,color-space" & "analogix,color-depth" & "analogix,link-rate" & "analogix,lane-count"& "analogix,ycbcr-coeff" & "analogix,dynamic-range" & "vsync-active-high"& "hsync-active-high" & "interlaces" - Separate all DTS changes to a separate patch. (Krzysztof) - Remove some deprecated DT properties in rockchip dp document. - Add commit message, and remove the redundant rockchip_dp_phy_init() function, move those code to probe() method. And remove driver .owner number. (Kishon) - Seprate the link-rate and lane-count limit out with the device_type flag. (Thierry) - Take Jingoo suggest, add commit messages. - Call drm_panel_prepare() in .get_modes function, ensure panel should power on before driver try to read edid message. Changes in v3: - Move exynos's video_timing code to analogix_dp-exynos platform driver, add get_modes method to struct analogix_dp_plat_data. (Thierry) - Rename some "samsung*" dts propery to "analogix*". (Heiko) - The link_rate and lane_count shouldn't config to the DT property value directly, but we can take those as hardware limite. For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would like "link-rate = 0x0a" "lane-count = 4". (Thierry) - Dynamic parse video timing info from struct drm_display_mode and struct drm_display_info. (Thierry) - Add devicetree binding documents. (Heiko) - Remove sync pol & colorimetry properies from the new analogix dp driver devicetree binding. (Thierry) - Update the exist exynos dtsi file with the latest DP DT properies. - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform driver which name to "pclk". (Thierry & Heiko) - Add devicetree binding document. (Heiko) - Remove "rockchip,panel" DT property, take use of remote point to get panel node. (Heiko) - Add the new function point dp_platdata->get_modes() init. - Suggest, add rockchip dp phy driver, collect the phy clocks and power control. (Heiko) - Add "analogix,need-force-hpd" to indicate whether driver need foce hpd when hpd detect failed. - move dp hpd detect to connector detect function. - Add edid modes parse support Changes in v2: - Keep author name list no changed (Jingoo) - Remove new copyright (Jingoo) - Fix compiled failed due to analogix_dp_device misspell - Improved commit message more readable, and avoid using some uncommon style like bellow: (Joe Preches) - retval = exynos_dp_read_bytes_from_i2c(... ...); + retval = + exynos_dp_read_bytes_from_i2c(..); - Get panel node with remote-endpoint method, and create devicetree binding for driver. (Heiko) - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m", leave those clock to rockchip dp phy driver. - Fix compile failed dut to phy_pd_addr variable misspell error Mark Yao (1): drm: rockchip: vop: add bpc and color mode setting Yakir Yang (16): drm: exynos: dp: convert to drm bridge mode drm: bridge: analogix/dp: split exynos dp driver to bridge directory drm: bridge: analogix/dp: fix some obvious code style drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range dt-bindings: add document for analogix display port driver ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver drm: rockchip: dp: add rockchip platform dp driver dt-binding
[PATCH v8 04/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
link_rate and lane_count already configured in analogix_dp_set_link_train(),
so we don't need to config those repeatly after training finished, just
remove them out.
Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Update commit message more readable. (Jingoo)
- Adjust the order from 05 to 04
Changes in v3:
- The link_rate and lane_count shouldn't config to the DT property value
directly, but we can take those as hardware limite. For example, RK3288
only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property would
like "link-rate = 0x0a" "lane-count = 4". (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 8
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 5 +++--
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 334181c..96afb67 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -624,6 +624,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct
analogix_dp_device *dp,
/*
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+* For DP rev.1.2, Maximum link rate of Main Link lanes
+* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
*/
analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, );
*bandwidth = data;
@@ -657,7 +659,8 @@ static void analogix_dp_init_training(struct
analogix_dp_device *dp,
analogix_dp_get_max_rx_lane_count(dp, >link_train.lane_count);
if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
+ (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -898,9 +901,6 @@ static void analogix_dp_commit(struct analogix_dp_device
*dp)
analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
analogix_dp_enable_enhanced_mode(dp, 1);
- analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
- analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
analogix_dp_init_video(dp);
ret = analogix_dp_config_video(dp);
if (ret)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 14d20be..9a90a18 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -21,8 +21,9 @@
#define MAX_EQ_LOOP 5
enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
+ LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
+ LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
+ LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
};
enum link_lane_count_type {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v8 10/17] phy: Add driver for rockchip Display Port PHY
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8:
- Fix the mixed spacers on macro definitions. (Heiko)
- Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
Changes in v7:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)
Changes in v6: None
Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
the exist "grf" syscon already. And rename the example DT node from
"edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
struct" to "static const struct". And correct the input paramters of
devm_phy_create() interfaces. (Heiko)
Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
function, move those code to probe() method. And remove driver .owner
number. (Kishon)
Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
power control. (Heiko)
Changes in v2: None
drivers/phy/Kconfig | 7 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 155 ++
3 files changed, 163 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-dp.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)+=
phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)+= phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)+= phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 000..c82c22f
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,155 @@
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define GRF_SOC_CON12 0x0274
+
+#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(4)
+#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
+
+#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON0
+#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
+
+struct rockchip_dp_phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+ struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+ int ret;
+
+ if (enable) {
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_ON);
+ if (ret < 0) {
+ dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dp->phy_24m);
+ } else {
+ clk_disable_unprepare(dp->phy_24m);
+
+ ret = regmap_write(dp->grf, GRF_SOC_CON12,
+ GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
+ GRF_EDP_PHY_SIDDQ_OFF);
+ }
+
+ return ret;
+}
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+ return rockchip_set_phy_state(phy, true);
+}
+
+static int rockchip_dp_phy_power_off(struct phy *
[PATCH v8 01/17] drm: exynos: dp: convert to drm bridge mode
In order to move exynos dp code to bridge directory,
we need to convert driver drm bridge mode first. As
dp driver already have a ptn3460 bridge, so we need
to move ptn bridge to the next bridge of dp bridge.
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6:
- Fix the wrong code in previous series, and test on Samsung snow Chromebook
successfully, here are the detail changes:
=>
- if (!dp->panel && !dp->bridge) {
+ if (!dp->panel && !dp->ptn_bridge) {
ret = exynos_dp_dt_parse_panel(dp);
if (ret)
=>
+ encoder->bridge = bridge;
bridge->driver_private = dp;
bridge->encoder = encoder;
bridge->funcs = _dp_bridge_funcs;
ret = drm_bridge_attach(drm_dev, bridge);
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Keep author name list no changed (Jingoo)
drivers/gpu/drm/exynos/exynos_dp_core.c | 103
drivers/gpu/drm/exynos/exynos_dp_core.h | 1 +
2 files changed, 78 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c
b/drivers/gpu/drm/exynos/exynos_dp_core.c
index 124fb9a..aedd074 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.c
+++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
@@ -1009,9 +1009,9 @@ static int exynos_drm_attach_lcd_bridge(struct
exynos_dp_device *dp,
{
int ret;
- encoder->bridge = dp->bridge;
- dp->bridge->encoder = encoder;
- ret = drm_bridge_attach(encoder->dev, dp->bridge);
+ encoder->bridge->next = dp->ptn_bridge;
+ dp->ptn_bridge->encoder = encoder;
+ ret = drm_bridge_attach(encoder->dev, dp->ptn_bridge);
if (ret) {
DRM_ERROR("Failed to attach bridge to drm\n");
return ret;
@@ -1020,14 +1020,15 @@ static int exynos_drm_attach_lcd_bridge(struct
exynos_dp_device *dp,
return 0;
}
-static int exynos_dp_create_connector(struct drm_encoder *encoder)
+static int exynos_dp_bridge_attach(struct drm_bridge *bridge)
{
- struct exynos_dp_device *dp = encoder_to_dp(encoder);
+ struct exynos_dp_device *dp = bridge->driver_private;
+ struct drm_encoder *encoder = >encoder;
struct drm_connector *connector = >connector;
int ret;
/* Pre-empt DP connector creation if there's a bridge */
- if (dp->bridge) {
+ if (dp->ptn_bridge) {
ret = exynos_drm_attach_lcd_bridge(dp, encoder);
if (!ret)
return 0;
@@ -1052,22 +1053,9 @@ static int exynos_dp_create_connector(struct drm_encoder
*encoder)
return ret;
}
-static bool exynos_dp_mode_fixup(struct drm_encoder *encoder,
-const struct drm_display_mode *mode,
-struct drm_display_mode *adjusted_mode)
-{
- return true;
-}
-
-static void exynos_dp_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
-}
-
-static void exynos_dp_enable(struct drm_encoder *encoder)
+static void exynos_dp_bridge_enable(struct drm_bridge *bridge)
{
- struct exynos_dp_device *dp = encoder_to_dp(encoder);
+ struct exynos_dp_device *dp = bridge->driver_private;
struct exynos_drm_crtc *crtc = dp_to_crtc(dp);
if (dp->dpms_mode == DRM_MODE_DPMS_ON)
@@ -1092,9 +1080,9 @@ static void exynos_dp_enable(struct drm_encoder *encoder)
dp->dpms_mode = DRM_MODE_DPMS_ON;
}
-static void exynos_dp_disable(struct drm_encoder *encoder)
+static void exynos_dp_bridge_disable(struct drm_bridge *bridge)
{
- struct exynos_dp_device *dp = encoder_to_dp(encoder);
+ struct exynos_dp_device *dp = bridge->driver_private;
struct exynos_drm_crtc *crtc = dp_to_crtc(dp);
if (dp->dpms_mode != DRM_MODE_DPMS_ON)
@@ -1123,6 +,69 @@ static void exynos_dp_disable(struct drm_encoder
*encoder)
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
+static void exynos_dp_bridge_nop(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static const struct drm_bridge_funcs exynos_dp_bridge_funcs = {
+ .enable = exynos_dp_bridge_enable,
+ .disable = exynos_dp_bridge_disable,
+ .pre_enable = exynos_dp_bridge_nop,
+ .post_disable = exynos_dp_bridge_nop,
+ .attach = exynos_dp_bridge_attach,
+};
+
+static int exynos_dp_create_connector(struct drm_encoder *encoder)
+{
+ struct exynos_dp_device *dp = encoder_to_dp(encoder);
+ struct drm_device *drm_dev = dp->drm_dev;
+ struct drm_bridge *bridge;
+ int ret;
+
+ bridge = devm_kzalloc(drm_dev->
[PATCH v8 03/17] drm: bridge: analogix/dp: fix some obvious code style
Fix some obvious alignment problems, like alignment and line
over 80 characters problems, make this easy to be maintained
later.
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Resequence this patch after analogix_dp driver have been split
from exynos_dp code, and rephrase reasonable commit message, and
remove some controversial style (Krzysztof)
- analogix_dp_write_byte_to_dpcd(
- dp, DP_TEST_RESPONSE,
+ analogix_dp_write_byte_to_dpcd(dp,
+ DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
Changes in v4: None
Changes in v3: None
Changes in v2:
- Improved commit message more readable, and avoid using some
uncommon style like bellow: (Joe Preches)
- retval = exynos_dp_read_bytes_from_i2c(...
...);
+ retval =
+ exynos_dp_read_bytes_from_i2c(..);
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 129 ++---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 72 ++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 124 ++--
3 files changed, 163 insertions(+), 162 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index e561590..334181c 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -61,7 +61,7 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device
*dp)
while (analogix_dp_get_plug_in_status(dp) != 0) {
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
dev_err(dp->dev, "failed to get hpd plug status\n");
return -ETIMEDOUT;
}
@@ -98,8 +98,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- _block);
+ EDID_EXTENSION_FLAG,
+ _block);
if (retval)
return retval;
@@ -107,7 +107,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = analogix_dp_read_bytes_from_i2c(dp,
I2C_EDID_DEVICE_ADDR,
+ retval = analogix_dp_read_bytes_from_i2c(dp,
+ I2C_EDID_DEVICE_ADDR,
EDID_HEADER_PATTERN,
EDID_BLOCK_LENGTH,
[EDID_HEADER_PATTERN]);
@@ -138,7 +139,7 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
}
analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- _vector);
+ _vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
analogix_dp_write_byte_to_dpcd(dp,
DP_TEST_EDID_CHECKSUM,
@@ -152,10 +153,8 @@ static int analogix_dp_read_edid(struct analogix_dp_device
*dp)
/* Read EDID data */
retval = analogix_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- [EDID_HEADER_PATTERN]);
+ I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH, [EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -166,16 +165,13 @@ static int analogix_dp_read_edid(struct
analogix_dp_device *dp)
return -EIO;
}
- analogix_dp_read_byte_from_dpcd(dp,
- DP_TEST_REQUEST,
- _vector);
+ analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+ _vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
analogix_dp_write
[PATCH v8 08/17] drm: rockchip: dp: add rockchip platform dp driver
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
- Remove the empty line at the end of document, and correct the endpoint
numbers in the example DT node, and remove the regulator iomux setting
in driver code while using the pinctl in devicetree instead. (Heiko)
- Add device type declared, cause the previous "platform device type
support (v4 11/16)" already merge into (v5 02/14).
- Implement connector registration code. (Thierry)
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.
Changes in v3:
- Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
and leave "sclk_edp" to analogix dp core driver which name to "dp",
and leave "pclk_edp" to rockchip dp platform driver which name to
"pclk". (Thierry & Heiko)
- Add devicetree binding document. (Heiko)
- Remove "rockchip,panel" DT property, take use of remote point to get panel
node. (Heiko)
- Add the new function point dp_platdata->get_modes() init.
Changes in v2:
- Get panel node with remote-endpoint method, and create devicetree binding
for driver. (Heiko)
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
drivers/gpu/drm/rockchip/Kconfig| 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 442
include/drm/bridge/analogix_dp.h| 1 +
4 files changed, 453 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..c2ba945 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_ANALOGIX_DP
+tristate "Rockchip specific extensions for Analogix DP driver"
+depends on DRM_ROCKCHIP
+select DRM_ANALOGIX_DP
+help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile
b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
new file mode 100644
index 000..2c82a9a
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,442 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy@rock-chips.com>
+ * Yakir Yang <y...@rock-chips.com>
+ * Jeff Chen <jeff.c...@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
+
+/* dp grf register offset */
+#define GRF_SOC_CON60x025c
+#define GRF_EDP_LCD_SEL_MASKBIT(5)
+#define GRF_EDP_SEL_VOP_LIT BIT(5)
+#define GRF_EDP_SEL_VOP_BIG 0
+
+struct rockchip_dp_device {
+ struct drm_device*drm_dev;
+ struct device*dev;
+ struct drm_encoder encoder;
+ struct drm_connector connector;
+ struct drm_display_mode mode;
+
+ struct clk *pclk;
+ struct regmap*grf;
+ struct reset_control *rst;
+
+ struct a
[PATCH v8 07/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver
After exynos_dp have been split the common IP code into analogix_dp driver,
the analogix_dp driver have deprecated some Samsung platform properties which
could be dynamically parsed from EDID/MODE/DPCD message, so this is an update
for Exynos DTS file for dp-controller.
Beside the backward compatibility is fully preserved, so there are no
bisectability break that make this change in a separate patch.
Reviewed-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Tested-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6:
- Fix Peach Pit hpd property name error:
- hpd-gpio = < 6 0>;
+ hpd-gpios = < 6 0>;
Changes in v5:
- Correct the misspell in commit message. (Krzysztof)
Changes in v4:
- Separate all DTS changes to a separate patch. (Krzysztof)
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/exynos5250-arndale.dts | 2 --
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 --
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 +---
arch/arm/boot/dts/exynos5250-spring.dts | 4 +---
arch/arm/boot/dts/exynos5420-peach-pit.dts| 4 +---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 --
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +---
7 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532..b1790cf 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -124,8 +124,6 @@
{
status = "okay";
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0f5dcd4..f30c2db 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -80,8 +80,6 @@
{
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 0a7f408..ee94110 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -236,12 +236,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 7 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts
b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d..91881d7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -74,12 +74,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
- samsung,hpd-gpio = < 0 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 0 GPIO_ACTIVE_HIGH>;
};
{
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 72ba6f0..8baf40a 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -148,12 +148,10 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd_gpio>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = < 6 GPIO_ACTIVE_HIGH>;
+ hpd-gpios = < 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ac35aef..f67344f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -93,8 +93,6 @@
pinctrl-names = "default";
pinctrl-0 = <_hpd>;
samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbc
[PATCH v8 09/17] dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Yakir Yang <y...@rock-chips.com>
---
Changes in v8:
- Modify the commit subject name. (Heiko)
Changes in v7: None
Changes in v6: None
Changes in v5:
- Split binding doc's from driver changes. (Rob)
- Add eDP hotplug pinctrl property. (Heiko)
Changes in v4: None
Changes in v3: None
Changes in v2: None
.../display/rockchip/analogix_dp-rockchip.txt | 90 ++
1 file changed, 90 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
diff --git
a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
new file mode 100644
index 000..ec93917
--- /dev/null
+++
b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -0,0 +1,90 @@
+Rockchip RK3288 specific extensions to the Analogix Display Port
+
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+
+- clock-names: from common clock binding:
+ Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+
+- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
+- pinctrl-0: pin-control mode. should be <_hpd>
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+---
+
+Example:
+ dp-controller: dp@ff97 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff97 0x4000>;
+ interrupts = ;
+ clocks = < SCLK_EDP>, < PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <_phy>;
+ phy-names = "dp";
+
+ rockchip,grf = <>;
+ resets = < 111>;
+ reset-names = "dp";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <_hpd>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint {
+ reg = <0>;
+ remote-endpoint = <_in_edp>
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ edp {
+ edp_hpd: edp-hpd {
+ rockchip,pins = <7 11 RK_FUNC_2
_pull_none>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
