Re: [PATCH v4 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
On 10/29/2015 11:27 AM, Krzysztof Kozlowski wrote: On 29.10.2015 13:58, Alim Akhtar wrote: From: Thomas Abraham Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators. Cc: devicet...@vger.kernel.org Signed-off-by: Thomas Abraham Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski Acked-by: Lee Jones --- Documentation/devicetree/bindings/mfd/s2mps11.txt | 23 ++--- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 890f0b0e1643..c0427c9d0886 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" - or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". +- compatible: Should be one of the following + - "samsung,s2mps11-pmic" + - "samsung,s2mps13-pmic" + - "samsung,s2mps14-pmic" + - "samsung,s2mps15-pmic" + - "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -24,7 +28,7 @@ Optional properties: unwanted buck warm reset (setting buck voltages to default values). Optional nodes: -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : @@ -37,12 +41,13 @@ Optional nodes: the clock which they consume. Clock ID Devices -- -32KhzAP0S2MPS11, S2MPS13, S2MPS14, S5M8767 -32KhzCP1S2MPS11, S2MPS13, S5M8767 -32KhzBT2S2MPS11, S2MPS13, S2MPS14, S5M8767 +32KhzAP0S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 +32KhzCP1S2MPS11, S2MPS13, S2MPS15, S5M8767 +32KhzBT2S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", - "samsung,s2mps14-clk", "samsung,s5m8767-clk" + "samsung,s2mps14-clk", "samsung,s2mps15-clk", + "samsung,s5m8767-clk" N. Why "samsung,s2mps15-clk"? Adding a new compatible to bindings is a major change so my review tag (from v1 where there was no such compatible) should be dropped. Please drop it. My bad, will drop it. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v4 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
On 29.10.2015 13:58, Alim Akhtar wrote: > From: Thomas Abraham > > Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device > is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators. > > Cc: devicet...@vger.kernel.org > Signed-off-by: Thomas Abraham > Signed-off-by: Alim Akhtar > Reviewed-by: Krzysztof Kozlowski > Acked-by: Lee Jones > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 23 > ++--- > 1 file changed, 15 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt > b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index 890f0b0e1643..c0427c9d0886 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,5 +1,5 @@ > > -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator > +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator > > The Samsung S2MPS11 is a multi-function device which includes voltage and > current regulators, RTC, charger controller and other sub-blocks. It is > @@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. > Each sub-block is > addressed by the host system using different I2C slave addresses. > > Required properties: > -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" > - or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". > +- compatible: Should be one of the following > + - "samsung,s2mps11-pmic" > + - "samsung,s2mps13-pmic" > + - "samsung,s2mps14-pmic" > + - "samsung,s2mps15-pmic" > + - "samsung,s2mpu02-pmic". > - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. > > Optional properties: > @@ -24,7 +28,7 @@ Optional properties: >unwanted buck warm reset (setting buck voltages to default values). > > Optional nodes: > -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered > 32.768 > +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) > buffered 32.768 >KHz outputs, so to register these as clocks with common clock framework >instantiate a sub-node named "clocks". It uses the common clock binding >documented in : > @@ -37,12 +41,13 @@ Optional nodes: > the clock which they consume. > Clock ID Devices > -- > -32KhzAP 0S2MPS11, S2MPS13, S2MPS14, S5M8767 > -32KhzCP 1S2MPS11, S2MPS13, S5M8767 > -32KhzBT 2S2MPS11, S2MPS13, S2MPS14, S5M8767 > +32KhzAP 0S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 > +32KhzCP 1S2MPS11, S2MPS13, S2MPS15, S5M8767 > +32KhzBT 2S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 > >- compatible: Should be one of: "samsung,s2mps11-clk", > "samsung,s2mps13-clk", > - "samsung,s2mps14-clk", "samsung,s5m8767-clk" > + "samsung,s2mps14-clk", "samsung,s2mps15-clk", > + "samsung,s5m8767-clk" N. Why "samsung,s2mps15-clk"? Adding a new compatible to bindings is a major change so my review tag (from v1 where there was no such compatible) should be dropped. Please drop it. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v4 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
From: Thomas Abraham Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators. Cc: devicet...@vger.kernel.org Signed-off-by: Thomas Abraham Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski Acked-by: Lee Jones --- Documentation/devicetree/bindings/mfd/s2mps11.txt | 23 ++--- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 890f0b0e1643..c0427c9d0886 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,8 +7,12 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" - or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". +- compatible: Should be one of the following + - "samsung,s2mps11-pmic" + - "samsung,s2mps13-pmic" + - "samsung,s2mps14-pmic" + - "samsung,s2mps15-pmic" + - "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -24,7 +28,7 @@ Optional properties: unwanted buck warm reset (setting buck voltages to default values). Optional nodes: -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : @@ -37,12 +41,13 @@ Optional nodes: the clock which they consume. Clock ID Devices -- -32KhzAP0S2MPS11, S2MPS13, S2MPS14, S5M8767 -32KhzCP1S2MPS11, S2MPS13, S5M8767 -32KhzBT2S2MPS11, S2MPS13, S2MPS14, S5M8767 +32KhzAP0S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 +32KhzCP1S2MPS11, S2MPS13, S2MPS15, S5M8767 +32KhzBT2S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", - "samsung,s2mps14-clk", "samsung,s5m8767-clk" + "samsung,s2mps14-clk", "samsung,s2mps15-clk", + "samsung,s5m8767-clk" - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -90,6 +95,7 @@ as per the datasheet of s2mps11. - S2MPS11: 1 to 38 - S2MPS13: 1 to 40 - S2MPS14: 1 to 25 + - S2MPS15: 1 to 27 - S2MPU02: 1 to 28 - Example: LDO1, LDO2, LDO28 - BUCKn @@ -97,6 +103,7 @@ as per the datasheet of s2mps11. - S2MPS11: 1 to 10 - S2MPS13: 1 to 10 - S2MPS14: 1 to 5 + - S2MPS15: 1 to 10 - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
