Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
Hello, On 2015-12-17 03:55, Joonyoung Shim wrote: +Cc: Boram Park, Hi Marek, On 12/16/2015 09:21 PM, Marek Szyprowski wrote: This patch adds all infrastructure to make zpos plane property configurable from userspace. Signed-off-by: Marek Szyprowski--- drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 ++- drivers/gpu/drm/exynos/exynos_drm_plane.c | 51 --- 2 files changed, 49 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index 588b6763f9c7..f0827dbebb7d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -64,6 +64,7 @@ struct exynos_drm_plane_state { struct exynos_drm_rect src; unsigned int h_ratio; unsigned int v_ratio; + unsigned int zpos; }; static inline struct exynos_drm_plane_state * @@ -91,11 +92,12 @@ struct exynos_drm_plane { #define EXYNOS_DRM_PLANE_CAP_DOUBLE (1 << 0) #define EXYNOS_DRM_PLANE_CAP_SCALE(1 << 1) +#define EXYNOS_DRM_PLANE_CAP_ZPOS (1 << 2) /* * Exynos DRM plane configuration structure. * - * @zpos: z-position of the plane. + * @zpos: initial z-position of the plane. * @type: type of the plane (primary, cursor or overlay). * @pixel_formats: supported pixel formats. * @num_pixel_formats: number of elements in 'pixel_formats'. diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index fd6cb4cee01a..a2bdab836b50 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -124,6 +124,7 @@ static void exynos_plane_mode_set(struct exynos_drm_plane_state *exynos_state) static void exynos_drm_plane_reset(struct drm_plane *plane) { + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); struct exynos_drm_plane_state *exynos_state; if (plane->state) { @@ -136,6 +137,7 @@ static void exynos_drm_plane_reset(struct drm_plane *plane) exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL); if (exynos_state) { + exynos_state->zpos = exynos_plane->config->zpos; plane->state = _state->base; plane->state->plane = plane; } @@ -153,6 +155,7 @@ exynos_drm_plane_duplicate_state(struct drm_plane *plane) return NULL; __drm_atomic_helper_plane_duplicate_state(plane, >base); + copy->zpos = exynos_state->zpos; return >base; } @@ -165,13 +168,53 @@ static void exynos_drm_plane_destroy_state(struct drm_plane *plane, kfree(old_exynos_state); } +static int exynos_drm_plane_atomic_set_property(struct drm_plane *plane, + struct drm_plane_state *state, + struct drm_property *property, + uint64_t val) +{ + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); + struct exynos_drm_plane_state *exynos_state = + to_exynos_plane_state(state); + struct exynos_drm_private *dev_priv = plane->dev->dev_private; + const struct exynos_drm_plane_config *config = exynos_plane->config; + + if (property == dev_priv->plane_zpos_property && + (config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS)) + exynos_state->zpos = val; + else + return -EINVAL; + + return 0; +} + +static int exynos_drm_plane_atomic_get_property(struct drm_plane *plane, + const struct drm_plane_state *state, + struct drm_property *property, + uint64_t *val) +{ + const struct exynos_drm_plane_state *exynos_state = + container_of(state, const struct exynos_drm_plane_state, base); + struct exynos_drm_private *dev_priv = plane->dev->dev_private; + + if (property == dev_priv->plane_zpos_property) + *val = exynos_state->zpos; + else + return -EINVAL; + + return 0; +} + static struct drm_plane_funcs exynos_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, .destroy= drm_plane_cleanup, + .set_property = drm_atomic_helper_plane_set_property, .reset = exynos_drm_plane_reset, .atomic_duplicate_state = exynos_drm_plane_duplicate_state, .atomic_destroy_state = exynos_drm_plane_destroy_state, + .atomic_set_property = exynos_drm_plane_atomic_set_property, + .atomic_get_property = exynos_drm_plane_atomic_get_property, }; static int @@ -267,8 +310,8 @@ static void exynos_plane_attach_zpos_property(struct drm_plane *plane, prop =
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
On 12/17/2015 10:05 PM, Marek Szyprowski wrote: > Hello, > > On 2015-12-17 03:55, Joonyoung Shim wrote: >> +Cc: Boram Park, >> >> Hi Marek, >> >> On 12/16/2015 09:21 PM, Marek Szyprowski wrote: >>> This patch adds all infrastructure to make zpos plane property >>> configurable from userspace. >>> >>> Signed-off-by: Marek Szyprowski>>> --- >>> drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 ++- >>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 51 >>> --- >>> 2 files changed, 49 insertions(+), 6 deletions(-) >>> >>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h >>> b/drivers/gpu/drm/exynos/exynos_drm_drv.h >>> index 588b6763f9c7..f0827dbebb7d 100644 >>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h >>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h >>> @@ -64,6 +64,7 @@ struct exynos_drm_plane_state { >>> struct exynos_drm_rect src; >>> unsigned int h_ratio; >>> unsigned int v_ratio; >>> +unsigned int zpos; >>> }; >>> static inline struct exynos_drm_plane_state * >>> @@ -91,11 +92,12 @@ struct exynos_drm_plane { >>> #define EXYNOS_DRM_PLANE_CAP_DOUBLE(1 << 0) >>> #define EXYNOS_DRM_PLANE_CAP_SCALE(1 << 1) >>> +#define EXYNOS_DRM_PLANE_CAP_ZPOS(1 << 2) >>> /* >>>* Exynos DRM plane configuration structure. >>>* >>> - * @zpos: z-position of the plane. >>> + * @zpos: initial z-position of the plane. >>>* @type: type of the plane (primary, cursor or overlay). >>>* @pixel_formats: supported pixel formats. >>>* @num_pixel_formats: number of elements in 'pixel_formats'. >>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> b/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> index fd6cb4cee01a..a2bdab836b50 100644 >>> --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> @@ -124,6 +124,7 @@ static void exynos_plane_mode_set(struct >>> exynos_drm_plane_state *exynos_state) >>> static void exynos_drm_plane_reset(struct drm_plane *plane) >>> { >>> +struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); >>> struct exynos_drm_plane_state *exynos_state; >>> if (plane->state) { >>> @@ -136,6 +137,7 @@ static void exynos_drm_plane_reset(struct drm_plane >>> *plane) >>> exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL); >>> if (exynos_state) { >>> +exynos_state->zpos = exynos_plane->config->zpos; >>> plane->state = _state->base; >>> plane->state->plane = plane; >>> } >>> @@ -153,6 +155,7 @@ exynos_drm_plane_duplicate_state(struct drm_plane >>> *plane) >>> return NULL; >>> __drm_atomic_helper_plane_duplicate_state(plane, >base); >>> +copy->zpos = exynos_state->zpos; >>> return >base; >>> } >>> @@ -165,13 +168,53 @@ static void exynos_drm_plane_destroy_state(struct >>> drm_plane *plane, >>> kfree(old_exynos_state); >>> } >>> +static int exynos_drm_plane_atomic_set_property(struct drm_plane *plane, >>> +struct drm_plane_state *state, >>> +struct drm_property *property, >>> +uint64_t val) >>> +{ >>> +struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); >>> +struct exynos_drm_plane_state *exynos_state = >>> +to_exynos_plane_state(state); >>> +struct exynos_drm_private *dev_priv = plane->dev->dev_private; >>> +const struct exynos_drm_plane_config *config = exynos_plane->config; >>> + >>> +if (property == dev_priv->plane_zpos_property && >>> +(config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS)) >>> +exynos_state->zpos = val; >>> +else >>> +return -EINVAL; >>> + >>> +return 0; >>> +} >>> + >>> +static int exynos_drm_plane_atomic_get_property(struct drm_plane *plane, >>> + const struct drm_plane_state *state, >>> + struct drm_property *property, >>> + uint64_t *val) >>> +{ >>> +const struct exynos_drm_plane_state *exynos_state = >>> +container_of(state, const struct exynos_drm_plane_state, base); >>> +struct exynos_drm_private *dev_priv = plane->dev->dev_private; >>> + >>> +if (property == dev_priv->plane_zpos_property) >>> +*val = exynos_state->zpos; >>> +else >>> +return -EINVAL; >>> + >>> +return 0; >>> +} >>> + >>> static struct drm_plane_funcs exynos_plane_funcs = { >>> .update_plane= drm_atomic_helper_update_plane, >>> .disable_plane= drm_atomic_helper_disable_plane, >>> .destroy= drm_plane_cleanup, >>> +.set_property= drm_atomic_helper_plane_set_property, >>> .reset= exynos_drm_plane_reset, >>> .atomic_duplicate_state = exynos_drm_plane_duplicate_state, >>> .atomic_destroy_state = exynos_drm_plane_destroy_state, >>> +.atomic_set_property = exynos_drm_plane_atomic_set_property,
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
+Cc: Boram Park, Hi Marek, On 12/16/2015 09:21 PM, Marek Szyprowski wrote: > This patch adds all infrastructure to make zpos plane property > configurable from userspace. > > Signed-off-by: Marek Szyprowski> --- > drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 ++- > drivers/gpu/drm/exynos/exynos_drm_plane.c | 51 > --- > 2 files changed, 49 insertions(+), 6 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h > b/drivers/gpu/drm/exynos/exynos_drm_drv.h > index 588b6763f9c7..f0827dbebb7d 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h > +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h > @@ -64,6 +64,7 @@ struct exynos_drm_plane_state { > struct exynos_drm_rect src; > unsigned int h_ratio; > unsigned int v_ratio; > + unsigned int zpos; > }; > > static inline struct exynos_drm_plane_state * > @@ -91,11 +92,12 @@ struct exynos_drm_plane { > > #define EXYNOS_DRM_PLANE_CAP_DOUBLE (1 << 0) > #define EXYNOS_DRM_PLANE_CAP_SCALE (1 << 1) > +#define EXYNOS_DRM_PLANE_CAP_ZPOS(1 << 2) > > /* > * Exynos DRM plane configuration structure. > * > - * @zpos: z-position of the plane. > + * @zpos: initial z-position of the plane. > * @type: type of the plane (primary, cursor or overlay). > * @pixel_formats: supported pixel formats. > * @num_pixel_formats: number of elements in 'pixel_formats'. > diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c > b/drivers/gpu/drm/exynos/exynos_drm_plane.c > index fd6cb4cee01a..a2bdab836b50 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c > @@ -124,6 +124,7 @@ static void exynos_plane_mode_set(struct > exynos_drm_plane_state *exynos_state) > > static void exynos_drm_plane_reset(struct drm_plane *plane) > { > + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); > struct exynos_drm_plane_state *exynos_state; > > if (plane->state) { > @@ -136,6 +137,7 @@ static void exynos_drm_plane_reset(struct drm_plane > *plane) > > exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL); > if (exynos_state) { > + exynos_state->zpos = exynos_plane->config->zpos; > plane->state = _state->base; > plane->state->plane = plane; > } > @@ -153,6 +155,7 @@ exynos_drm_plane_duplicate_state(struct drm_plane *plane) > return NULL; > > __drm_atomic_helper_plane_duplicate_state(plane, >base); > + copy->zpos = exynos_state->zpos; > return >base; > } > > @@ -165,13 +168,53 @@ static void exynos_drm_plane_destroy_state(struct > drm_plane *plane, > kfree(old_exynos_state); > } > > +static int exynos_drm_plane_atomic_set_property(struct drm_plane *plane, > + struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t val) > +{ > + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); > + struct exynos_drm_plane_state *exynos_state = > + to_exynos_plane_state(state); > + struct exynos_drm_private *dev_priv = plane->dev->dev_private; > + const struct exynos_drm_plane_config *config = exynos_plane->config; > + > + if (property == dev_priv->plane_zpos_property && > + (config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS)) > + exynos_state->zpos = val; > + else > + return -EINVAL; > + > + return 0; > +} > + > +static int exynos_drm_plane_atomic_get_property(struct drm_plane *plane, > + const struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t *val) > +{ > + const struct exynos_drm_plane_state *exynos_state = > + container_of(state, const struct exynos_drm_plane_state, base); > + struct exynos_drm_private *dev_priv = plane->dev->dev_private; > + > + if (property == dev_priv->plane_zpos_property) > + *val = exynos_state->zpos; > + else > + return -EINVAL; > + > + return 0; > +} > + > static struct drm_plane_funcs exynos_plane_funcs = { > .update_plane = drm_atomic_helper_update_plane, > .disable_plane = drm_atomic_helper_disable_plane, > .destroy= drm_plane_cleanup, > + .set_property = drm_atomic_helper_plane_set_property, > .reset = exynos_drm_plane_reset, > .atomic_duplicate_state = exynos_drm_plane_duplicate_state, > .atomic_destroy_state = exynos_drm_plane_destroy_state, > + .atomic_set_property = exynos_drm_plane_atomic_set_property, > + .atomic_get_property = exynos_drm_plane_atomic_get_property, > }; > > static int > @@ -267,8 +310,8 @@ static void
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
On Wed, Dec 16, 2015 at 01:21:43PM +0100, Marek Szyprowski wrote: > This patch adds all infrastructure to make zpos plane property > configurable from userspace. > > Signed-off-by: Marek SzyprowskiImo zpos should be a generic atomic property with well-defined semantics shared across drivers. So - storead (in decoded form) in drm_plane_state - common functions to register/attach zpos prop to a plane, with full-blown kerneldoc explaining how it should work - generic kms igt to validate that interface One of the big things that always comes up when we talk about zpos is how equal zpos should be handled, and how exactly they should be sorted. I think for that we should have a drm function which computes a normalized zpos. Or the core check code should reject such nonsense. -Daniel > --- > drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 ++- > drivers/gpu/drm/exynos/exynos_drm_plane.c | 51 > --- > 2 files changed, 49 insertions(+), 6 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h > b/drivers/gpu/drm/exynos/exynos_drm_drv.h > index 588b6763f9c7..f0827dbebb7d 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h > +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h > @@ -64,6 +64,7 @@ struct exynos_drm_plane_state { > struct exynos_drm_rect src; > unsigned int h_ratio; > unsigned int v_ratio; > + unsigned int zpos; > }; > > static inline struct exynos_drm_plane_state * > @@ -91,11 +92,12 @@ struct exynos_drm_plane { > > #define EXYNOS_DRM_PLANE_CAP_DOUBLE (1 << 0) > #define EXYNOS_DRM_PLANE_CAP_SCALE (1 << 1) > +#define EXYNOS_DRM_PLANE_CAP_ZPOS(1 << 2) > > /* > * Exynos DRM plane configuration structure. > * > - * @zpos: z-position of the plane. > + * @zpos: initial z-position of the plane. > * @type: type of the plane (primary, cursor or overlay). > * @pixel_formats: supported pixel formats. > * @num_pixel_formats: number of elements in 'pixel_formats'. > diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c > b/drivers/gpu/drm/exynos/exynos_drm_plane.c > index fd6cb4cee01a..a2bdab836b50 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c > @@ -124,6 +124,7 @@ static void exynos_plane_mode_set(struct > exynos_drm_plane_state *exynos_state) > > static void exynos_drm_plane_reset(struct drm_plane *plane) > { > + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); > struct exynos_drm_plane_state *exynos_state; > > if (plane->state) { > @@ -136,6 +137,7 @@ static void exynos_drm_plane_reset(struct drm_plane > *plane) > > exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL); > if (exynos_state) { > + exynos_state->zpos = exynos_plane->config->zpos; > plane->state = _state->base; > plane->state->plane = plane; > } > @@ -153,6 +155,7 @@ exynos_drm_plane_duplicate_state(struct drm_plane *plane) > return NULL; > > __drm_atomic_helper_plane_duplicate_state(plane, >base); > + copy->zpos = exynos_state->zpos; > return >base; > } > > @@ -165,13 +168,53 @@ static void exynos_drm_plane_destroy_state(struct > drm_plane *plane, > kfree(old_exynos_state); > } > > +static int exynos_drm_plane_atomic_set_property(struct drm_plane *plane, > + struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t val) > +{ > + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); > + struct exynos_drm_plane_state *exynos_state = > + to_exynos_plane_state(state); > + struct exynos_drm_private *dev_priv = plane->dev->dev_private; > + const struct exynos_drm_plane_config *config = exynos_plane->config; > + > + if (property == dev_priv->plane_zpos_property && > + (config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS)) > + exynos_state->zpos = val; > + else > + return -EINVAL; > + > + return 0; > +} > + > +static int exynos_drm_plane_atomic_get_property(struct drm_plane *plane, > + const struct drm_plane_state *state, > + struct drm_property *property, > + uint64_t *val) > +{ > + const struct exynos_drm_plane_state *exynos_state = > + container_of(state, const struct exynos_drm_plane_state, base); > + struct exynos_drm_private *dev_priv = plane->dev->dev_private; > + > + if (property == dev_priv->plane_zpos_property) > + *val = exynos_state->zpos; > + else > + return -EINVAL; > + > + return 0; > +} > + > static struct drm_plane_funcs exynos_plane_funcs = { > .update_plane =
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
On Wed, Dec 16, 2015 at 02:28:36PM +0100, Daniel Vetter wrote: > On Wed, Dec 16, 2015 at 01:21:43PM +0100, Marek Szyprowski wrote: > > This patch adds all infrastructure to make zpos plane property > > configurable from userspace. > > > > Signed-off-by: Marek Szyprowski> > Imo zpos should be a generic atomic property with well-defined semantics > shared across drivers. So > - storead (in decoded form) in drm_plane_state > - common functions to register/attach zpos prop to a plane, with > full-blown kerneldoc explaining how it should work > - generic kms igt to validate that interface > > One of the big things that always comes up when we talk about zpos is how > equal zpos should be handled, and how exactly they should be sorted. I > think for that we should have a drm function which computes a normalized > zpos. Or the core check code should reject such nonsense. Yeah I think just having some core check reject the operation if two planes end up with the same zpos. And zpos should probably just be in the [0-number_of_planes_on_the_crtc_currently] range? Or maybe [0-max_number_of_planes_possible_on_the_crtc], or just [0-total_max_number_of_planes] ? One of the latter two might be sensible because you could then enable/disable some planes on the crtc without necessarily touching the zpos for the other planes. Another complication is how you think about color keying. Eg. if you use dst keying between the primary plane and some other plane, then it may make sense to think of the primary being above the other plane and the colorkey just punches a hole into the primary. But if the planes otherwise are always ordered with the primary at the botton, then I'm not sure if exposing zpos and requiring it to be reconfigured for colorkeying to work would just make things more confusing. But this decisions might also depend on what happens to pixels on the other plane that fall outside of the primary plane (assuming the primary can be non-fullscreen). I don't remember off the top of my head how this works on Intel hw. The other option I suppose is to define color keying as just being slightly magic that it can effectively reorder the planes even though zpos says something else. Not quite sure which is best. Dst color keying is rather confusing in any case since it may work only between certain planes (and exactly which planes may depend which planes are active on the same crtc). > -Daniel > > > --- > > drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 ++- > > drivers/gpu/drm/exynos/exynos_drm_plane.c | 51 > > --- > > 2 files changed, 49 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h > > b/drivers/gpu/drm/exynos/exynos_drm_drv.h > > index 588b6763f9c7..f0827dbebb7d 100644 > > --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h > > +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h > > @@ -64,6 +64,7 @@ struct exynos_drm_plane_state { > > struct exynos_drm_rect src; > > unsigned int h_ratio; > > unsigned int v_ratio; > > + unsigned int zpos; > > }; > > > > static inline struct exynos_drm_plane_state * > > @@ -91,11 +92,12 @@ struct exynos_drm_plane { > > > > #define EXYNOS_DRM_PLANE_CAP_DOUBLE(1 << 0) > > #define EXYNOS_DRM_PLANE_CAP_SCALE (1 << 1) > > +#define EXYNOS_DRM_PLANE_CAP_ZPOS (1 << 2) > > > > /* > > * Exynos DRM plane configuration structure. > > * > > - * @zpos: z-position of the plane. > > + * @zpos: initial z-position of the plane. > > * @type: type of the plane (primary, cursor or overlay). > > * @pixel_formats: supported pixel formats. > > * @num_pixel_formats: number of elements in 'pixel_formats'. > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c > > b/drivers/gpu/drm/exynos/exynos_drm_plane.c > > index fd6cb4cee01a..a2bdab836b50 100644 > > --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c > > +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c > > @@ -124,6 +124,7 @@ static void exynos_plane_mode_set(struct > > exynos_drm_plane_state *exynos_state) > > > > static void exynos_drm_plane_reset(struct drm_plane *plane) > > { > > + struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); > > struct exynos_drm_plane_state *exynos_state; > > > > if (plane->state) { > > @@ -136,6 +137,7 @@ static void exynos_drm_plane_reset(struct drm_plane > > *plane) > > > > exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL); > > if (exynos_state) { > > + exynos_state->zpos = exynos_plane->config->zpos; > > plane->state = _state->base; > > plane->state->plane = plane; > > } > > @@ -153,6 +155,7 @@ exynos_drm_plane_duplicate_state(struct drm_plane > > *plane) > > return NULL; > > > > __drm_atomic_helper_plane_duplicate_state(plane, >base); > > + copy->zpos = exynos_state->zpos; > > return >base; > > } > > > > @@ -165,13 +168,53 @@ static void
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
Hello, On 2015-12-16 14:28, Daniel Vetter wrote: On Wed, Dec 16, 2015 at 01:21:43PM +0100, Marek Szyprowski wrote: This patch adds all infrastructure to make zpos plane property configurable from userspace. Signed-off-by: Marek SzyprowskiImo zpos should be a generic atomic property with well-defined semantics shared across drivers. So - storead (in decoded form) in drm_plane_state - common functions to register/attach zpos prop to a plane, with full-blown kerneldoc explaining how it should work - generic kms igt to validate that interface One of the big things that always comes up when we talk about zpos is how equal zpos should be handled, and how exactly they should be sorted. I think for that we should have a drm function which computes a normalized zpos. Or the core check code should reject such nonsense. IMHO it will be enough to state that the case of equal zpos is HW specific. This might simplify some driver logic. For example, in case of Exynos Mixer, equal priority (zpos) means that HW predefined order will be used, so there is no need to normalize zpos values. If you want I can move zpos to drm core and add a function to normalize zpos, although for this particular driver normalization is not needed. It should be quite easy to convert other drivers to use the generic zpos property. The only problem I see is how to handle omap driver, which use 'zorder' property. What about some other typical properties related to blending: - global plane alpha, - colorkey, - alpha mode (standard or pre-multiplied) for alpha-enabled modes, - crtc background color. Do you also want to handle them as generic or driver-specific properties? I plan to add support for them to Exynos Mixer and I would like to avoid doing this twice. Best regards -- Marek Szyprowski, PhD Samsung R Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
On Wed, Dec 16, 2015 at 02:54:04PM +0100, Marek Szyprowski wrote: > Hello, > > On 2015-12-16 14:28, Daniel Vetter wrote: > >On Wed, Dec 16, 2015 at 01:21:43PM +0100, Marek Szyprowski wrote: > >>This patch adds all infrastructure to make zpos plane property > >>configurable from userspace. > >> > >>Signed-off-by: Marek Szyprowski> >Imo zpos should be a generic atomic property with well-defined semantics > >shared across drivers. So > >- storead (in decoded form) in drm_plane_state > >- common functions to register/attach zpos prop to a plane, with > > full-blown kerneldoc explaining how it should work > >- generic kms igt to validate that interface > > > >One of the big things that always comes up when we talk about zpos is how > >equal zpos should be handled, and how exactly they should be sorted. I > >think for that we should have a drm function which computes a normalized > >zpos. Or the core check code should reject such nonsense. > > IMHO it will be enough to state that the case of equal zpos is HW specific. > This might simplify some driver logic. For example, in case of Exynos Mixer, > equal priority (zpos) means that HW predefined order will be used, so there > is no need to normalize zpos values. > > If you want I can move zpos to drm core and add a function to normalize > zpos, > although for this particular driver normalization is not needed. > > It should be quite easy to convert other drivers to use the generic zpos > property. The only problem I see is how to handle omap driver, which use > 'zorder' property. > > What about some other typical properties related to blending: > - global plane alpha, > - colorkey, > - alpha mode (standard or pre-multiplied) for alpha-enabled modes, > - crtc background color. > > Do you also want to handle them as generic or driver-specific properties? Should all be generic really. And it's also kinda ABI, so userspace needed, and preferrably a proper/automated testcase. i915 has infrastructure to use display pipeline CRCs to really measure it's all correct even, and that's the standard I'd like to see for all KMS API extensions like this. Since if we don't do this we'll end up in a giant mess, and it will be impossible to write a kms compositor that's generic and uses all this. And since this stuff is supposed to be generic, fluffy/unspecified semantics aren't good. Especially if your hw can just somehow deal with it all. > I plan to add support for them to Exynos Mixer and I would like to avoid > doing this twice. It's a lot more work than just adding a few members to drm_plane_state. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v3 2/7] drm/exynos: make zpos property configurable
Hello, On 2015-12-16 15:21, Daniel Vetter wrote: On Wed, Dec 16, 2015 at 02:54:04PM +0100, Marek Szyprowski wrote: On 2015-12-16 14:28, Daniel Vetter wrote: On Wed, Dec 16, 2015 at 01:21:43PM +0100, Marek Szyprowski wrote: This patch adds all infrastructure to make zpos plane property configurable from userspace. Signed-off-by: Marek SzyprowskiImo zpos should be a generic atomic property with well-defined semantics shared across drivers. So - storead (in decoded form) in drm_plane_state - common functions to register/attach zpos prop to a plane, with full-blown kerneldoc explaining how it should work - generic kms igt to validate that interface One of the big things that always comes up when we talk about zpos is how equal zpos should be handled, and how exactly they should be sorted. I think for that we should have a drm function which computes a normalized zpos. Or the core check code should reject such nonsense. IMHO it will be enough to state that the case of equal zpos is HW specific. This might simplify some driver logic. For example, in case of Exynos Mixer, equal priority (zpos) means that HW predefined order will be used, so there is no need to normalize zpos values. If you want I can move zpos to drm core and add a function to normalize zpos, although for this particular driver normalization is not needed. It should be quite easy to convert other drivers to use the generic zpos property. The only problem I see is how to handle omap driver, which use 'zorder' property. What about some other typical properties related to blending: - global plane alpha, - colorkey, - alpha mode (standard or pre-multiplied) for alpha-enabled modes, - crtc background color. Do you also want to handle them as generic or driver-specific properties? Should all be generic really. And it's also kinda ABI, so userspace needed, and preferrably a proper/automated testcase. i915 has infrastructure to use display pipeline CRCs to really measure it's all correct even, and that's the standard I'd like to see for all KMS API extensions like this. Could you tell a bit more about this pipeline CRCs? What is it? Since if we don't do this we'll end up in a giant mess, and it will be impossible to write a kms compositor that's generic and uses all this. And since this stuff is supposed to be generic, fluffy/unspecified semantics aren't good. Especially if your hw can just somehow deal with it all. I plan to add support for them to Exynos Mixer and I would like to avoid doing this twice. It's a lot more work than just adding a few members to drm_plane_state. I see. Could you elaborate a bit more on what you want to have in drm core for handling all the mentioned features? Best regards -- Marek Szyprowski, PhD Samsung R Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html