Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On 04/24/2018 11:09 AM, Steffen Maier wrote: On 11/04/2016 05:35 PM, Martin K. Petersen wrote: "Hannes" == Hannes Reineckewrites: Hannes> Checking with SAT-3 (section 6.2.4: Commands the SATL queues Hannes> internally) the implemented behaviour is standards conformant, Hannes> although the standard also allows for returning 'TASK SET FULL' Hannes> or 'BUSY' in these cases. Doing so would nicely solve this Hannes> issue. I agree with Hannes that it would be appropriate for the SATL to report busy when it makes an non-queued command queueable. Wouldn't this potentially still cause problems if the secure erase takes longer than max_retries * scmd_tmo. I.e. the command timing out by default after 180 seconds as in https://www.spinics.net/lists/linux-block/msg24837.html ? The fix approach here seems to also handle this gracefully. Well, yes, of course the command will be terminated after it timed out. But typically secure erase is invoked from userspace via sg ioctls, and it's in the responsibility of the application to set the correct timeout. Cheers, Hannes
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On 11/04/2016 05:35 PM, Martin K. Petersen wrote: "Hannes" == Hannes Reineckewrites: Hannes> Checking with SAT-3 (section 6.2.4: Commands the SATL queues Hannes> internally) the implemented behaviour is standards conformant, Hannes> although the standard also allows for returning 'TASK SET FULL' Hannes> or 'BUSY' in these cases. Doing so would nicely solve this Hannes> issue. I agree with Hannes that it would be appropriate for the SATL to report busy when it makes an non-queued command queueable. Wouldn't this potentially still cause problems if the secure erase takes longer than max_retries * scmd_tmo. I.e. the command timing out by default after 180 seconds as in https://www.spinics.net/lists/linux-block/msg24837.html ? The fix approach here seems to also handle this gracefully. -- Mit freundlichen Grüßen / Kind regards Steffen Maier Linux on z Systems Development IBM Deutschland Research & Development GmbH Vorsitzende des Aufsichtsrats: Martina Koederitz Geschaeftsfuehrung: Dirk Wittkopp Sitz der Gesellschaft: Boeblingen Registergericht: Amtsgericht Stuttgart, HRB 243294
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
On Mon, Apr 23, 2018 at 06:28:03PM +, Igor Rybak wrote: > Hi, > > We are running kernel 4.4.0-22 and the patch below does not seem to be > present in the mpt3sas driver. Can you please confirm? Please update your kernel, this patch was in the 4.4.36 kernel release which came out December 2, 2016, well over a full year ago. thanks, greg k-h
RE: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
Hi, We are running kernel 4.4.0-22 and the patch below does not seem to be present in the mpt3sas driver. Can you please confirm? As a reminder the patch was related to a Security Erase ATA command that requires a very long timeout like 100 minutes or more and the drive retains a busy status. And the driver should not try to send other commands or reset the drive. Thanks, Igor Rybak CTO MediaClone Inc 6900 Canby Ave Ste 107 Reseda, CA 91335 USA +1-818-654-6286 From: Sreekanth Reddy [sreekanth.re...@broadcom.com] Sent: Thursday, November 10, 2016 8:38 PM To: Andrey Grodzovsky Cc: PDL-MPT-FUSIONLINUX; Igor Rybak; Ezra Kohavi; linux-scsi@vger.kernel.org; Sathya Prakash; Chaitra P B; Suganath Prabu Subramani; Hannes Reinecke; sta...@vger.kernel.org Subject: Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4) On Thu, Nov 10, 2016 at 8:05 PM, Andrey Grodzovsky <andrey2...@gmail.com> wrote: > Problem: > This is a work around for a bug with LSI Fusion MPT SAS2 when > pefroming secure erase. Due to the very long time the operation > takes commands issued during the erase will time out and will trigger > execution of abort hook. Even though the abort hook is called for > the specific command which timed out this leads to entire device halt > (scsi_state terminated) and premature termination of the secured erase. > > Fix: > Set device state to busy while erase in progress to reject any incoming > commands until the erase is done. The device is blocked any way during > this time and cannot execute any other command. > More data and logs can be found here - > https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view > > v2: Update according to example patch by Hannes Reinecke to apply > the blocking logic to any ATA 12/16 command. > > v3: Use SCSI commands opcodes definitions instead of value and > correct identation. > > v4: Fix checkpath errors and warning. > > Signed-off-by: Andrey Grodzovsky <andrey2...@gmail.com> > Cc: <linux-scsi@vger.kernel.org> > Cc: Sathya Prakash <sathya.prak...@broadcom.com> > Cc: Chaitra P B <chaitra.basa...@broadcom.com> > Cc: Suganath Prabu Subramani <suganath-prabu.subram...@broadcom.com> > Cc: Sreekanth Reddy <sreekanth.re...@broadcom.com> > Cc: Hannes Reinecke <h...@suse.de> > Cc: <sta...@vger.kernel.org> Acked-by: Sreekanth Reddy <sreekanth.re...@broadcom.com> > --- > drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 > 1 file changed, 16 insertions(+) > > diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c > b/drivers/scsi/mpt3sas/mpt3sas_scsih.c > index 5a97e32..c032319 100644 > --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c > +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c > @@ -3500,6 +3500,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 > ioc_status) > SAM_STAT_CHECK_CONDITION; > } > > +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) > +{ > + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); > +} > > /** > * _scsih_qcmd - main scsi request entry point > @@ -3528,6 +3532,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd > *scmd) > scsi_print_command(scmd); > #endif > > + /** > + * Lock the device for any subsequent command until > + * command is done. > + */ > + if (ata_12_16_cmd(scmd)) > + scsi_internal_device_block(scmd->device); > + > + > sas_device_priv_data = scmd->device->hostdata; > if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { > scmd->result = DID_NO_CONNECT << 16; > @@ -4062,6 +4074,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, > u8 msix_index, u32 reply) > if (scmd == NULL) > return 1; > > + if (ata_12_16_cmd(scmd)) > + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); > + > + > mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); > > if (mpi_reply == NULL) { > -- > 2.1.4 >
Patch "scsi: mpt3sas: Fix secure erase premature termination" has been added to the 4.8-stable tree
This is a note to let you know that I've just added the patch titled scsi: mpt3sas: Fix secure erase premature termination to the 4.8-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: scsi-mpt3sas-fix-secure-erase-premature-termination.patch and it can be found in the queue-4.8 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please letknow about it. >From 18f6084a989ba1b38702f9af37a2e4049a924be6 Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Thu, 10 Nov 2016 09:35:27 -0500 Subject: scsi: mpt3sas: Fix secure erase premature termination From: Andrey Grodzovsky commit 18f6084a989ba1b38702f9af37a2e4049a924be6 upstream. This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by: Andrey Grodzovsky Acked-by: Sreekanth Reddy Cc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 15 ++- 1 file changed, 14 insertions(+), 1 deletion(-) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4019,7 +4019,10 @@ _scsih_eedp_error_handling(struct scsi_c SAM_STAT_CHECK_CONDITION; } - +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); +} /** * scsih_qcmd - main scsi request entry point @@ -4047,6 +4050,13 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (ioc->logging_level & MPT_DEBUG_SCSI) scsi_print_command(scmd); + /* +* Lock the device for any subsequent command until command is +* done. +*/ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4622,6 +4632,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *i if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { Patches currently in stable-queue which might be from andrey2...@gmail.com are queue-4.8/scsi-mpt3sas-fix-secure-erase-premature-termination.patch -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Patch "scsi: mpt3sas: Fix secure erase premature termination" has been added to the 4.4-stable tree
This is a note to let you know that I've just added the patch titled scsi: mpt3sas: Fix secure erase premature termination to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: scsi-mpt3sas-fix-secure-erase-premature-termination.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please letknow about it. >From 18f6084a989ba1b38702f9af37a2e4049a924be6 Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Thu, 10 Nov 2016 09:35:27 -0500 Subject: scsi: mpt3sas: Fix secure erase premature termination From: Andrey Grodzovsky commit 18f6084a989ba1b38702f9af37a2e4049a924be6 upstream. This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by: Andrey Grodzovsky Acked-by: Sreekanth Reddy Cc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 15 ++- 1 file changed, 14 insertions(+), 1 deletion(-) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3831,7 +3831,10 @@ _scsih_eedp_error_handling(struct scsi_c SAM_STAT_CHECK_CONDITION; } - +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); +} /** * scsih_qcmd - main scsi request entry point @@ -3859,6 +3862,13 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (ioc->logging_level & MPT_DEBUG_SCSI) scsi_print_command(scmd); + /* +* Lock the device for any subsequent command until command is +* done. +*/ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4431,6 +4441,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *i if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { Patches currently in stable-queue which might be from andrey2...@gmail.com are queue-4.4/scsi-mpt3sas-fix-secure-erase-premature-termination.patch -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
> "Andrey" == Andrey Grodzovskywrites: Andrey, Andrey> Regarding older code where there is still a separate mpt2sas Andrey> driver, should a separate patch to be done or this fix will be Andrey> ported there ? Feel free to submit a mpt2sas patch to the pre-4.4 stable trees. -- Martin K. Petersen Oracle Linux Engineering -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
On Sat, Nov 12, 2016 at 10:29 AM, Martin K. Petersenwrote: >> "Andrey" == Andrey Grodzovsky writes: > > Andrey, > > Andrey> Problem: This is a work around for a bug with LSI Fusion MPT > Andrey> SAS2 when pefroming secure erase. Due to the very long time the > Andrey> operation takes commands issued during the erase will time out > Andrey> and will trigger execution of abort hook. Even though the abort > Andrey> hook is called for the specific command which timed out this > Andrey> leads to entire device halt (scsi_state terminated) and > Andrey> premature termination of the secured erase. > > This patch didn't apply to the SCSI tree. I merged it into > 4.9/scsi-fixes by hand. Sorry about that and thanks. Next time i will work of off latest tree. Regarding older code where there is still a separate mpt2sas driver, should a separate patch to be done or this fix will be ported there ? Thanks, Andrey > > Also, please check Documentation/SubmittingPatches for future > submissions. Patch version goes inside the [PATCH foo/bar] brackets and > patch changelog entries below "---" separator. > > Thanks! > Martin > > -- > Martin K. Petersen Oracle Linux Engineering -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
> "Andrey" == Andrey Grodzovskywrites: Andrey, Andrey> Problem: This is a work around for a bug with LSI Fusion MPT Andrey> SAS2 when pefroming secure erase. Due to the very long time the Andrey> operation takes commands issued during the erase will time out Andrey> and will trigger execution of abort hook. Even though the abort Andrey> hook is called for the specific command which timed out this Andrey> leads to entire device halt (scsi_state terminated) and Andrey> premature termination of the secured erase. This patch didn't apply to the SCSI tree. I merged it into 4.9/scsi-fixes by hand. Also, please check Documentation/SubmittingPatches for future submissions. Patch version goes inside the [PATCH foo/bar] brackets and patch changelog entries below "---" separator. Thanks! Martin -- Martin K. Petersen Oracle Linux Engineering -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
On Thu, Nov 10, 2016 at 8:05 PM, Andrey Grodzovskywrote: > Problem: > This is a work around for a bug with LSI Fusion MPT SAS2 when > pefroming secure erase. Due to the very long time the operation > takes commands issued during the erase will time out and will trigger > execution of abort hook. Even though the abort hook is called for > the specific command which timed out this leads to entire device halt > (scsi_state terminated) and premature termination of the secured erase. > > Fix: > Set device state to busy while erase in progress to reject any incoming > commands until the erase is done. The device is blocked any way during > this time and cannot execute any other command. > More data and logs can be found here - > https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view > > v2: Update according to example patch by Hannes Reinecke to apply > the blocking logic to any ATA 12/16 command. > > v3: Use SCSI commands opcodes definitions instead of value and > correct identation. > > v4: Fix checkpath errors and warning. > > Signed-off-by: Andrey Grodzovsky > Cc: > Cc: Sathya Prakash > Cc: Chaitra P B > Cc: Suganath Prabu Subramani > Cc: Sreekanth Reddy > Cc: Hannes Reinecke > Cc: Acked-by: Sreekanth Reddy > --- > drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 > 1 file changed, 16 insertions(+) > > diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c > b/drivers/scsi/mpt3sas/mpt3sas_scsih.c > index 5a97e32..c032319 100644 > --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c > +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c > @@ -3500,6 +3500,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 > ioc_status) > SAM_STAT_CHECK_CONDITION; > } > > +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) > +{ > + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); > +} > > /** > * _scsih_qcmd - main scsi request entry point > @@ -3528,6 +3532,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd > *scmd) > scsi_print_command(scmd); > #endif > > + /** > + * Lock the device for any subsequent command until > + * command is done. > + */ > + if (ata_12_16_cmd(scmd)) > + scsi_internal_device_block(scmd->device); > + > + > sas_device_priv_data = scmd->device->hostdata; > if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { > scmd->result = DID_NO_CONNECT << 16; > @@ -4062,6 +4074,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, > u8 msix_index, u32 reply) > if (scmd == NULL) > return 1; > > + if (ata_12_16_cmd(scmd)) > + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); > + > + > mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); > > if (mpi_reply == NULL) { > -- > 2.1.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v4)
Problem: This is a work around for a bug with LSI Fusion MPT SAS2 when pefroming secure erase. Due to the very long time the operation takes commands issued during the erase will time out and will trigger execution of abort hook. Even though the abort hook is called for the specific command which timed out this leads to entire device halt (scsi_state terminated) and premature termination of the secured erase. Fix: Set device state to busy while erase in progress to reject any incoming commands until the erase is done. The device is blocked any way during this time and cannot execute any other command. More data and logs can be found here - https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view v2: Update according to example patch by Hannes Reinecke to apply the blocking logic to any ATA 12/16 command. v3: Use SCSI commands opcodes definitions instead of value and correct identation. v4: Fix checkpath errors and warning. Signed-off-by: Andrey GrodzovskyCc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Cc: --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 1 file changed, 16 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 5a97e32..c032319 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3500,6 +3500,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); +} /** * _scsih_qcmd - main scsi request entry point @@ -3528,6 +3532,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) scsi_print_command(scmd); #endif + /** + * Lock the device for any subsequent command until + * command is done. + */ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4062,6 +4074,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v3)
On Thu, Nov 10, 2016 at 08:42:52AM -0500, Andrey Grodzovsky wrote: > Problem: > This is a work around for a bug with LSI Fusion MPT SAS2 when > pefroming secure erase. Due to the very long time the operation > takes commands issued during the erase will time out and will trigger > execution of abort hook. Even though the abort hook is called for > the specifc command which timed out this leads to entire device halt > (scsi_state terminated) and premature termination of the secured erase. > > Fix: > Set device state to busy while erase in progress to reject any incoming > commands until the erase is done. The device is blocked any way during > this time and cannot execute any other command. > More data and logs can be found here - > https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view > > v2: Update according to example patch by Hannes Reinecke to apply > the blocking logic to any ATA 12/16 command. > > v3: Use SCSI commands opcodes definitions instead of value and > correct identation. > > Signed-off-by: Andrey Grodzovsky> Cc: > Cc: Sathya Prakash > Cc: Chaitra P B > Cc: Suganath Prabu Subramani > Cc: Sreekanth Reddy > Cc: Hannes Reinecke > Cc: > --- > drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 > 1 file changed, 16 insertions(+) > > diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c > b/drivers/scsi/mpt3sas/mpt3sas_scsih.c > index 5a97e32..320f16c 100644 > --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c > +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c > @@ -3500,6 +3500,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 > ioc_status) > SAM_STAT_CHECK_CONDITION; > } > > +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) > +{ > + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); > +} Please always run your patches through checkpatch.pl so you don't get a grumpy maintainer emailing you and telling you to run your patches through checkpatch.pl... -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v3)
Problem: This is a work around for a bug with LSI Fusion MPT SAS2 when pefroming secure erase. Due to the very long time the operation takes commands issued during the erase will time out and will trigger execution of abort hook. Even though the abort hook is called for the specifc command which timed out this leads to entire device halt (scsi_state terminated) and premature termination of the secured erase. Fix: Set device state to busy while erase in progress to reject any incoming commands until the erase is done. The device is blocked any way during this time and cannot execute any other command. More data and logs can be found here - https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view v2: Update according to example patch by Hannes Reinecke to apply the blocking logic to any ATA 12/16 command. v3: Use SCSI commands opcodes definitions instead of value and correct identation. Signed-off-by: Andrey GrodzovskyCc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Cc: --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 1 file changed, 16 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 5a97e32..320f16c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3500,6 +3500,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); +} /** * _scsih_qcmd - main scsi request entry point @@ -3528,6 +3532,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) scsi_print_command(scmd); #endif + /** + * Lock the device for any subsequent command until + * command is done. + */ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4062,6 +4074,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On Sat, Nov 5, 2016 at 6:47 PM, Andrey Grodzovskywrote: > On Fri, Nov 4, 2016 at 10:51 AM, Hannes Reinecke wrote: >> On 11/04/2016 01:45 PM, Sreekanth Reddy wrote: >>> >>> Hi All, >>> >>> From last two days, I was working with my firmware team to get the >>> required info over this issue. Here is my firmware team response >>> >>> "For ATA PASSTHROUGH commands, the IOC SATL will not check for the >>> opcode and will direct it to the drive. So even though ATA PASSTHOUGH >>> has ATA erase to the drive, IOC SATL FW will not know that and as a >>> general logic for all ATA PASSTHOGH commands, IOC FW will pend the >>> upcoming IOs untill the previous ATA PASSTHORUGH completes. This is as >>> per the SAT specification for SAS controllers and we can't compare it >>> with the SATA controllers in the on board that have full fledge SATA >>> implementation". >>> >>> So this is an expected behavior from our HBA firmware. i.e. it will >>> pend the subsequent commands if any ATA PASSTHROUGH command is going >>> on. So their is no issue with the FW. >>> >> But is there a way to figure out if the firmware / SATL layer is busy >> processing requests? >> >> With 'real' ATA HBAs these issue doesn't occur, as the ATA erase command is >> a non-queued command, and hence the next command automatically has to wait >> for the erase command to complete. >> But this wait happens as the ATA HBA returns 'BUSY', and the linux I/O stack >> will then reset the timeout for all consecutive commands. >> >> With mpt3sas _all_ commands are queued, so if there is a long-running I/O >> command all other commands already in the queue will time out. >> >> Which is at least a very awkward behaviour. >> >> Checking with SAT-3 (section 6.2.4: Commands the SATL queues internally) the >> implemented behaviour is standards conformant, although the standard also >> allows for returning 'TASK SET FULL' or 'BUSY' in these cases. >> Doing so would nicely solve this issue. >> >>> Today I have tried the same test case on my local setup. i.e. I have >>> issued a secure erase command using hdparm utility and observed the >>> same issue on 4.2.3-300.fc23.x86_64 kernel. >>> >>> Then after browsing over this issue, I found that some people are >>> recommending to enable 'CONFIG_IDE_TASK_IOCTL' Kconfig flag. I had a >>> compiled 4.4.0 kernel, so I have enabled this CONFIG_IDE_TASK_IOCTL >>> and recompiled this 4.4.0 kernel and booted in to this kernel. Then I >>> tried same test case and I haven't observed this issue and secure >>> erase operation was completed successfully. >>> >>> So, can you please try once with CONFIG_IDE_TASK_IOCTL enabled. >>> >> Errm. >> CONFIG_IDE_TASK_IOCTL is for the old IDE subsystem, which isn't in use here. >> So this option does not make a difference when using mpt3sas, as this is a >> 'real' SCSI driver which never calls out into any of these subsystems. >> >> I would be _VERY_ much surprised if that would make a difference. >> >> The reason why this behaviour did go unnoticed with older kernels was that a >> command timeout would trigger SCSI EH to engage, and that in turn required >> all outstanding commands to complete. >> So by the time SCSI EH started the ERASE command was complete, and a retry >> of the timed-out commands would work. > > Indeed, when retesting with CONFIG_IDE_TASK_IOCTL=y and. reverting the > fix the bug is back. > > Thanks, > Andrey Hi Andrey, We are fine with this patch with below few changes, 1. Please remove below comment. it not a bug in firmware, it is designed like that, /* This is a work around for a bug with LSI Fusion MPT SAS2 when * pefroming secure erase. Due to the verly long time the operation * takes commands issued during the erase will time out and will trigger * execution of abort hook. This leads to device reset and premature * termination of the secured erase. */ 2. Use SCSI commands opcodes definitions instead of value, so replace below line return (scmd->cmnd[0] == 0xa1 || scmd->cmnd[0] == 0x85); as return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); 3. Please correct alignment for the below comment, /** * Lock the device for any subsequent command until * command is done. */ Thanks, Sreekanth >> >> >> Cheers, >> >> Hannes >> -- >> Dr. Hannes Reinecke zSeries & Storage >> h...@suse.de +49 911 74053 688 >> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg >> GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On Fri, Nov 4, 2016 at 10:51 AM, Hannes Reineckewrote: > On 11/04/2016 01:45 PM, Sreekanth Reddy wrote: >> >> Hi All, >> >> From last two days, I was working with my firmware team to get the >> required info over this issue. Here is my firmware team response >> >> "For ATA PASSTHROUGH commands, the IOC SATL will not check for the >> opcode and will direct it to the drive. So even though ATA PASSTHOUGH >> has ATA erase to the drive, IOC SATL FW will not know that and as a >> general logic for all ATA PASSTHOGH commands, IOC FW will pend the >> upcoming IOs untill the previous ATA PASSTHORUGH completes. This is as >> per the SAT specification for SAS controllers and we can't compare it >> with the SATA controllers in the on board that have full fledge SATA >> implementation". >> >> So this is an expected behavior from our HBA firmware. i.e. it will >> pend the subsequent commands if any ATA PASSTHROUGH command is going >> on. So their is no issue with the FW. >> > But is there a way to figure out if the firmware / SATL layer is busy > processing requests? > > With 'real' ATA HBAs these issue doesn't occur, as the ATA erase command is > a non-queued command, and hence the next command automatically has to wait > for the erase command to complete. > But this wait happens as the ATA HBA returns 'BUSY', and the linux I/O stack > will then reset the timeout for all consecutive commands. > > With mpt3sas _all_ commands are queued, so if there is a long-running I/O > command all other commands already in the queue will time out. > > Which is at least a very awkward behaviour. > > Checking with SAT-3 (section 6.2.4: Commands the SATL queues internally) the > implemented behaviour is standards conformant, although the standard also > allows for returning 'TASK SET FULL' or 'BUSY' in these cases. > Doing so would nicely solve this issue. > >> Today I have tried the same test case on my local setup. i.e. I have >> issued a secure erase command using hdparm utility and observed the >> same issue on 4.2.3-300.fc23.x86_64 kernel. >> >> Then after browsing over this issue, I found that some people are >> recommending to enable 'CONFIG_IDE_TASK_IOCTL' Kconfig flag. I had a >> compiled 4.4.0 kernel, so I have enabled this CONFIG_IDE_TASK_IOCTL >> and recompiled this 4.4.0 kernel and booted in to this kernel. Then I >> tried same test case and I haven't observed this issue and secure >> erase operation was completed successfully. >> >> So, can you please try once with CONFIG_IDE_TASK_IOCTL enabled. >> > Errm. > CONFIG_IDE_TASK_IOCTL is for the old IDE subsystem, which isn't in use here. > So this option does not make a difference when using mpt3sas, as this is a > 'real' SCSI driver which never calls out into any of these subsystems. > > I would be _VERY_ much surprised if that would make a difference. > > The reason why this behaviour did go unnoticed with older kernels was that a > command timeout would trigger SCSI EH to engage, and that in turn required > all outstanding commands to complete. > So by the time SCSI EH started the ERASE command was complete, and a retry > of the timed-out commands would work. Indeed, when retesting with CONFIG_IDE_TASK_IOCTL=y and. reverting the fix the bug is back. Thanks, Andrey > > > Cheers, > > Hannes > -- > Dr. Hannes Reinecke zSeries & Storage > h...@suse.de +49 911 74053 688 > SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg > GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
> "Hannes" == Hannes Reineckewrites: Hannes> Checking with SAT-3 (section 6.2.4: Commands the SATL queues Hannes> internally) the implemented behaviour is standards conformant, Hannes> although the standard also allows for returning 'TASK SET FULL' Hannes> or 'BUSY' in these cases. Doing so would nicely solve this Hannes> issue. I agree with Hannes that it would be appropriate for the SATL to report busy when it makes an non-queued command queueable. -- Martin K. Petersen Oracle Linux Engineering -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On 11/04/2016 01:45 PM, Sreekanth Reddy wrote: Hi All, From last two days, I was working with my firmware team to get the required info over this issue. Here is my firmware team response "For ATA PASSTHROUGH commands, the IOC SATL will not check for the opcode and will direct it to the drive. So even though ATA PASSTHOUGH has ATA erase to the drive, IOC SATL FW will not know that and as a general logic for all ATA PASSTHOGH commands, IOC FW will pend the upcoming IOs untill the previous ATA PASSTHORUGH completes. This is as per the SAT specification for SAS controllers and we can't compare it with the SATA controllers in the on board that have full fledge SATA implementation". So this is an expected behavior from our HBA firmware. i.e. it will pend the subsequent commands if any ATA PASSTHROUGH command is going on. So their is no issue with the FW. But is there a way to figure out if the firmware / SATL layer is busy processing requests? With 'real' ATA HBAs these issue doesn't occur, as the ATA erase command is a non-queued command, and hence the next command automatically has to wait for the erase command to complete. But this wait happens as the ATA HBA returns 'BUSY', and the linux I/O stack will then reset the timeout for all consecutive commands. With mpt3sas _all_ commands are queued, so if there is a long-running I/O command all other commands already in the queue will time out. Which is at least a very awkward behaviour. Checking with SAT-3 (section 6.2.4: Commands the SATL queues internally) the implemented behaviour is standards conformant, although the standard also allows for returning 'TASK SET FULL' or 'BUSY' in these cases. Doing so would nicely solve this issue. Today I have tried the same test case on my local setup. i.e. I have issued a secure erase command using hdparm utility and observed the same issue on 4.2.3-300.fc23.x86_64 kernel. Then after browsing over this issue, I found that some people are recommending to enable 'CONFIG_IDE_TASK_IOCTL' Kconfig flag. I had a compiled 4.4.0 kernel, so I have enabled this CONFIG_IDE_TASK_IOCTL and recompiled this 4.4.0 kernel and booted in to this kernel. Then I tried same test case and I haven't observed this issue and secure erase operation was completed successfully. So, can you please try once with CONFIG_IDE_TASK_IOCTL enabled. Errm. CONFIG_IDE_TASK_IOCTL is for the old IDE subsystem, which isn't in use here. So this option does not make a difference when using mpt3sas, as this is a 'real' SCSI driver which never calls out into any of these subsystems. I would be _VERY_ much surprised if that would make a difference. The reason why this behaviour did go unnoticed with older kernels was that a command timeout would trigger SCSI EH to engage, and that in turn required all outstanding commands to complete. So by the time SCSI EH started the ERASE command was complete, and a retry of the timed-out commands would work. Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage h...@suse.de +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
Hi All, >From last two days, I was working with my firmware team to get the required info over this issue. Here is my firmware team response "For ATA PASSTHROUGH commands, the IOC SATL will not check for the opcode and will direct it to the drive. So even though ATA PASSTHOUGH has ATA erase to the drive, IOC SATL FW will not know that and as a general logic for all ATA PASSTHOGH commands, IOC FW will pend the upcoming IOs untill the previous ATA PASSTHORUGH completes. This is as per the SAT specification for SAS controllers and we can't compare it with the SATA controllers in the on board that have full fledge SATA implementation". So this is an expected behavior from our HBA firmware. i.e. it will pend the subsequent commands if any ATA PASSTHROUGH command is going on. So their is no issue with the FW. Today I have tried the same test case on my local setup. i.e. I have issued a secure erase command using hdparm utility and observed the same issue on 4.2.3-300.fc23.x86_64 kernel. Then after browsing over this issue, I found that some people are recommending to enable 'CONFIG_IDE_TASK_IOCTL' Kconfig flag. I had a compiled 4.4.0 kernel, so I have enabled this CONFIG_IDE_TASK_IOCTL and recompiled this 4.4.0 kernel and booted in to this kernel. Then I tried same test case and I haven't observed this issue and secure erase operation was completed successfully. So, can you please try once with CONFIG_IDE_TASK_IOCTL enabled. Thanks, Sreekanth On Thu, Nov 3, 2016 at 9:19 AM, Igor Rybak <i...@media-clone.com> wrote: > Hi, > > We tried the latest LSI firmware 20.0.0.7, also collected logs by the > Broadcom script and emailed to their tech support already. > > Thanks, > > Igor Rybak > VP Engineering > MediaClone Inc > > > Original message > From: Andrey Grodzovsky <andrey2...@gmail.com> > Date: 11/2/16 9:31 PM (GMT+05:30) > To: Sreekanth Reddy <sreekanth.re...@broadcom.com>, Igor Rybak > <i...@media-clone.com>, Ezra Kohavi <e...@media-clone.com> > Cc: PDL-MPT-FUSIONLINUX <mpt-fusionlinux@broadcom.com>, > linux-scsi@vger.kernel.org, Hannes Reinecke <h...@suse.de>, Sathya Prakash > <sathya.prak...@broadcom.com>, Chaitra P B <chaitra.basa...@broadcom.com>, > Suganath Prabu Subramani <suganath-prabu.subram...@broadcom.com>, > sta...@vger.kernel.org > Subject: Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination > (v2) > > > > On Wed, Nov 2, 2016 at 6:05 AM, Sreekanth Reddy > <sreekanth.re...@broadcom.com> wrote: >> >> On Wed, Nov 2, 2016 at 7:37 AM, Hannes Reinecke <h...@suse.de> wrote: >> > On 11/02/2016 01:09 AM, Andrey Grodzovsky wrote: >> >> >> >> Problem: >> >> This is a work around for a bug with LSI Fusion MPT SAS2 when >> >> pefroming secure erase. Due to the very long time the operation >> >> takes commands issued during the erase will time out and will trigger >> >> execution of abort hook. Even though the abort hook is called for >> >> the specifc command which timed out this leads to entire device halt >> >> (scsi_state terminated) and premature termination of the secured erase. >> >> >> >> Fix: >> >> Set device state to busy while erase in progress to reject any incoming >> >> commands until the erase is done. The device is blocked any way during >> >> this time and cannot execute any other command. >> >> More data and logs can be found here - >> >> https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view >> >> >> >> v2: Update according to example patch by Hannes Reinecke to apply >> >> the blocking logic to any ATA 12/16 command. >> >> >> >> Signed-off-by: Andrey Grodzovsky <andrey2...@gmail.com> >> >> Cc: <linux-scsi@vger.kernel.org> >> >> Cc: Sathya Prakash <sathya.prak...@broadcom.com> >> >> Cc: Chaitra P B <chaitra.basa...@broadcom.com> >> >> Cc: Suganath Prabu Subramani <suganath-prabu.subram...@broadcom.com> >> >> Cc: Sreekanth Reddy <sreekanth.re...@broadcom.com> >> >> Cc: Hannes Reinecke <h...@suse.de> >> >> Cc: <sta...@vger.kernel.org> >> >> --- >> >> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 26 ++ >> >> 1 file changed, 26 insertions(+) >> >> >> >> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> >> b/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> >> index 5a97e32..43ab0cc 100644 >> >> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> >> +++ b/drivers/scsi/mpt3sa
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On Wed, Nov 2, 2016 at 7:37 AM, Hannes Reineckewrote: > On 11/02/2016 01:09 AM, Andrey Grodzovsky wrote: >> >> Problem: >> This is a work around for a bug with LSI Fusion MPT SAS2 when >> pefroming secure erase. Due to the very long time the operation >> takes commands issued during the erase will time out and will trigger >> execution of abort hook. Even though the abort hook is called for >> the specifc command which timed out this leads to entire device halt >> (scsi_state terminated) and premature termination of the secured erase. >> >> Fix: >> Set device state to busy while erase in progress to reject any incoming >> commands until the erase is done. The device is blocked any way during >> this time and cannot execute any other command. >> More data and logs can be found here - >> https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view >> >> v2: Update according to example patch by Hannes Reinecke to apply >> the blocking logic to any ATA 12/16 command. >> >> Signed-off-by: Andrey Grodzovsky >> Cc: >> Cc: Sathya Prakash >> Cc: Chaitra P B >> Cc: Suganath Prabu Subramani >> Cc: Sreekanth Reddy >> Cc: Hannes Reinecke >> Cc: >> --- >> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 26 ++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> b/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> index 5a97e32..43ab0cc 100644 >> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c >> @@ -3500,6 +3500,20 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, >> u16 ioc_status) >> SAM_STAT_CHECK_CONDITION; >> } >> >> +/** >> + * This is a work around for a bug with LSI Fusion MPT SAS2 when >> + * pefroming secure erase. Due to the verly long time the operation >> + * takes commands issued during the erase will time out and will trigger >> + * execution of abort hook. This leads to device reset and premature >> + * termination of the secured erase. >> + * >> + */ >> +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) >> +{ >> + return (scmd->cmnd[0] == 0xa1 || scmd->cmnd[0] == 0x85); >> +} >> + >> + >> >> /** >> * _scsih_qcmd - main scsi request entry point >> @@ -3528,6 +3542,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct >> scsi_cmnd *scmd) >> scsi_print_command(scmd); >> #endif >> >> + /** >> + * Lock the device for any subsequent command until >> + * command is done. >> + */ >> + if (ata_12_16_cmd(scmd)) >> + scsi_internal_device_block(scmd->device); >> + >> + >> sas_device_priv_data = scmd->device->hostdata; >> if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { >> scmd->result = DID_NO_CONNECT << 16; >> @@ -4062,6 +4084,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 >> smid, u8 msix_index, u32 reply) >> if (scmd == NULL) >> return 1; >> >> + if (ata_12_16_cmd(scmd)) >> + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); >> + >> + >> mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); >> >> if (mpi_reply == NULL) { >> > Yeah, it's ugly, but I can't think of a better solution for the moment. > Thanks for debugging this. May I known the result of same test case if the SATA drive is connected to on-bord SATA? If it is assumed to be HBA firmware issue then it should be fixed in the Firmware not in the driver. Have you tried with the latest HBA Firmware image? if it still occurs then is it possible for you to share the firmware logs? I think that service request has raised for this issue with Broadcom, in this service request our support people can help you in collecting the firmware logs and can provide the analysis of those firmware logs. Thanks, Sreekanth > > Reviewed-by: Hannes Reinecke > > Cheers, > > Hannes > -- > Dr. Hannes Reinecke zSeries & Storage > h...@suse.de +49 911 74053 688 > SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg > GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
On 11/02/2016 01:09 AM, Andrey Grodzovsky wrote: Problem: This is a work around for a bug with LSI Fusion MPT SAS2 when pefroming secure erase. Due to the very long time the operation takes commands issued during the erase will time out and will trigger execution of abort hook. Even though the abort hook is called for the specifc command which timed out this leads to entire device halt (scsi_state terminated) and premature termination of the secured erase. Fix: Set device state to busy while erase in progress to reject any incoming commands until the erase is done. The device is blocked any way during this time and cannot execute any other command. More data and logs can be found here - https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view v2: Update according to example patch by Hannes Reinecke to apply the blocking logic to any ATA 12/16 command. Signed-off-by: Andrey GrodzovskyCc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Cc: --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 26 ++ 1 file changed, 26 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 5a97e32..43ab0cc 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3500,6 +3500,20 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } +/** + * This is a work around for a bug with LSI Fusion MPT SAS2 when + * pefroming secure erase. Due to the verly long time the operation + * takes commands issued during the erase will time out and will trigger + * execution of abort hook. This leads to device reset and premature + * termination of the secured erase. + * + */ +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == 0xa1 || scmd->cmnd[0] == 0x85); +} + + /** * _scsih_qcmd - main scsi request entry point @@ -3528,6 +3542,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) scsi_print_command(scmd); #endif + /** + * Lock the device for any subsequent command until + * command is done. + */ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4062,6 +4084,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { Yeah, it's ugly, but I can't think of a better solution for the moment. Thanks for debugging this. Reviewed-by: Hannes Reinecke Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage h...@suse.de +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] [SCSI] mpt3sas: Fix secure erase premature termination (v2)
Problem: This is a work around for a bug with LSI Fusion MPT SAS2 when pefroming secure erase. Due to the very long time the operation takes commands issued during the erase will time out and will trigger execution of abort hook. Even though the abort hook is called for the specifc command which timed out this leads to entire device halt (scsi_state terminated) and premature termination of the secured erase. Fix: Set device state to busy while erase in progress to reject any incoming commands until the erase is done. The device is blocked any way during this time and cannot execute any other command. More data and logs can be found here - https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view v2: Update according to example patch by Hannes Reinecke to apply the blocking logic to any ATA 12/16 command. Signed-off-by: Andrey GrodzovskyCc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Cc: --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 26 ++ 1 file changed, 26 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 5a97e32..43ab0cc 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3500,6 +3500,20 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } +/** + * This is a work around for a bug with LSI Fusion MPT SAS2 when + * pefroming secure erase. Due to the verly long time the operation + * takes commands issued during the erase will time out and will trigger + * execution of abort hook. This leads to device reset and premature + * termination of the secured erase. + * + */ +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == 0xa1 || scmd->cmnd[0] == 0x85); +} + + /** * _scsih_qcmd - main scsi request entry point @@ -3528,6 +3542,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) scsi_print_command(scmd); #endif + /** + * Lock the device for any subsequent command until + * command is done. + */ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4062,6 +4084,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] [SCSI] mpt3sas: Fix secure erase premature termination.
On 10/30/2016 01:43 PM, Andrey Grodzovsky wrote: Problem: This is a work around for a bug with LSI Fusion MPT SAS2 when pefroming secure erase. Due to the very long time the operation takes commands issued during the erase will time out and will trigger execution of abort hook. Even though the abort hook is called for the specifc command which timed out this leads to entire device halt (scsi_state terminated) and premature termination of the secured erase. Actually, it is _not_ the erase command which times out, it's the successive commands which time out, as the controller is unable to process them while erase is running. I suspect a bug in the SAT-layer from the mpt3sas firmware, which simply does not return 'busy' for additional commands when erase is in progress. That being said, this issue was obscured prior to implementing asynchronous aborts, as originally a timeout would be invoking SCSI EH, which would wait for all outstanding commands to complete. So by the time SCSI EH was invoked the erase command was already completed, allowing for a successful retry of the failing command. With asynchronous aborts we don't have this option, as the abort will succeed, but the command cannot be retried as the original erase command is still running. In the light of the above I guess we need something like the attached patch. I'm not utterly proud of if, but I guess it's the best we can do for the moment. Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage h...@suse.de +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) >From 1556746987c3b4c1a1a4705625280b1136554f89 Mon Sep 17 00:00:00 2001 From: Hannes ReineckeDate: Sun, 30 Oct 2016 14:24:44 +0100 Subject: [PATCH] mpt3sas: hack: disable concurrent commands for ATA_16/ATA_12 There's a bug in the mpt3sas driver/firmware which would not return BUSY if it's busy processing requests (eg 'erase') and cannot respond to other commands. Hence these commands will timeout and eventually start the error handler. This patch disallows request processing whenever an ATA_12 or ATA_16 command is received, thereby avoiding this problem. Signed-off-by: Hannes Reinecke --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 11 +++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 97987e7..18b9f09 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4096,6 +4096,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) sas_device_priv_data->block) return SCSI_MLQUEUE_DEVICE_BUSY; + /* + * Hack: block the device for any ATA_12/ATA_16 command + */ + if (scmd->cmnd[0] == 0xa1 || scmd->cmnd[0] == 0x85) { + sas_device_priv_data = scmd->device->hostdata; + _scsih_internal_device_block(scmd->device, sas_device_priv_data); + } if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) @@ -4835,6 +4842,10 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) out: + if (scmd->cmnd[0] == 0xa1 || scmd->cmnd[0] == 0x85) { + sas_device_priv_data = scmd->device->hostdata; + _scsih_internal_device_unblock(scmd->device, sas_device_priv_data); + } scsi_dma_unmap(scmd); scmd->scsi_done(scmd); -- 2.6.6
[PATCH] [SCSI] mpt3sas: Fix secure erase premature termination.
Problem: This is a work around for a bug with LSI Fusion MPT SAS2 when pefroming secure erase. Due to the very long time the operation takes commands issued during the erase will time out and will trigger execution of abort hook. Even though the abort hook is called for the specifc command which timed out this leads to entire device halt (scsi_state terminated) and premature termination of the secured erase. Fix: Set device state to busy while erase in progress to reject any incoming commands until the erase is done. The device is blocked any way during this time and cannot execute any other command. More data and logs can be found here - https://drive.google.com/file/d/0B9ocOHYHbbS1Q3VMdkkzeWFkTjg/view Signed-off-by: Andrey GrodzovskyCc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Cc: --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 30 ++ 1 file changed, 30 insertions(+) diff --git [PATCH]drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 5a97e32..5542dd02 100644 --- [PATCH]drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3500,6 +3500,23 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } +/** + * This is a work around for a bug with LSI Fusion MPT SAS2 when + * pefroming secure erase. Due to the verly long time the operation + * takes commands issued during the erase will time out and will trigger + * execution of abort hook. This leads to device reset and premature + * termination of the secured erase. + */ +static inline bool disk_erase_command(struct scsi_cmnd *scmd) +{ + /** + * Identify secure erase command according to + * ATA/ATAPI Command Set (ATA8-ACS) p.202 + */ + return scmd->cmd_len == 16 && scmd->cmnd[14] == 0xf4; +} + + /** * _scsih_qcmd - main scsi request entry point @@ -3528,6 +3545,14 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) scsi_print_command(scmd); #endif + /** + * Lock the device for any subsequent command until secured erase + * command is done. + */ + if (disk_erase_command(scmd)) + scsi_internal_device_block(scmd->device); + + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4062,6 +4087,11 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; + /* Secured erase is done. Unlock the device */ + if (disk_erase_command(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html