[linux-sunxi] Re: [U-Boot] [PATCH] sunxi: Add support for Cubietruck Plus

2016-03-19 Thread Dennis Gilmore 
On Saturday, March 19, 2016 5:43:52 PM CDT Dennis Gilmore wrote:
> Hans,
> 
> What is the status of this patch?
> 
> Dennis

With the patch applied building for Cubietruck_plus fails with 

  ld.bfd   -pie  --gc-sections -Bstatic -Ttext 0x4a00 -o u-boot -T u-
boot.lds arch/arm/cpu/armv7/start.o --start-group  arch/arm/cpu/built-in.o  
arch/arm/cpu/armv7/built-in.o  arch/arm/lib/built-in.o  board/sunxi/built-in.o  
cmd/built-in.o  common/built-in.o  disk/built-in.o  drivers/built-in.o  
drivers/dma/built-in.o  drivers/gpio/built-in.o  drivers/i2c/built-in.o  
drivers/mmc/built-in.o  drivers/mtd/built-in.o  drivers/mtd/onenand/built-in.o  
drivers/mtd/spi/built-in.o  drivers/net/built-in.o  drivers/net/phy/built-in.o  
drivers/pci/built-in.o  drivers/power/built-in.o  drivers/power/battery/built-
in.o  drivers/power/fuel_gauge/built-in.o  drivers/power/mfd/built-in.o  
drivers/power/pmic/built-in.o  drivers/power/regulator/built-in.o  drivers/
serial/built-in.o  drivers/spi/built-in.o  drivers/usb/dwc3/built-in.o  
drivers/usb/emul/built-in.o  drivers/usb/eth/built-in.o  drivers/usb/gadget/
built-in.o  drivers/usb/gadget/udc/built-in.o  drivers/usb/host/built-in.o  
drivers/usb/musb-new/built-in.o  drivers/usb/musb/built-in.o  drivers/usb/phy/
built-in.o  drivers/usb/ulpi/built-in.o  fs/built-in.o  lib/built-in.o  net/
built-in.o  test/built-in.o  test/dm/built-in.o --end-group arch/arm/lib/
eabi_compat.o  -L /usr/lib/gcc/armv7hl-redhat-linux-gnueabi/6.0.0 -lgcc -Map 
u-boot.map
board/sunxi/built-in.o: In function `i2c_init_board':
/builddir/build/BUILD/u-boot-2016.03/board/sunxi/board.c:363: undefined 
reference to `clock_twi_onoff'
ld.bfd: BFD version 2.26.20160125 assertion fail elf32-arm.c:8434
ld.bfd: error: required section '.rel.plt' not found in the linker script
ld.bfd: final link failed: Invalid operation


> On Wednesday, January 27, 2016 4:34:44 PM CDT Chen-Yu Tsai wrote:
> > Cubietruck Plus is a A83T/H8 based development board. The board has
> > standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
> > via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
> > WiFi, headphone out / mic in, and various GPIO headers.
> > 
> > The board also has an EEPROM on i2c0 which holds the MAC address.
> > 
> > DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
> > is connected to the reset control of the PHY. EMAC is not actually
> > supported yet.
> > 
> > The DTS is the same as the one already in the kernel.
> > 
> > Signed-off-by: Chen-Yu Tsai <w...@csie.org>
> > ---
> > 
> >  arch/arm/dts/Makefile   |  1 +
> >  arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65
> > 
> > + configs/Cubietruck_plus_defconfig  
> > |
> > 18 
> > 
> >  3 files changed, 84 insertions(+)
> >  create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> >  create mode 100644 configs/Cubietruck_plus_defconfig
> > 
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 1c7d359..e338db5 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -184,6 +184,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
> > 
> > sun8i-a33-sinlinx-sina33.dtb
> >  
> >  dtb-$(CONFIG_MACH_SUN8I_A83T) += \
> >  
> > sun8i-a83t-allwinner-h8homlet-v2.dtb \
> > 
> > +   sun8i-a83t-cubietruck-plus.dtb \
> > 
> > sun8i-a83t-sinovoip-bpi-m3.dtb
> >  
> >  dtb-$(CONFIG_MACH_SUN8I_H3) += \
> >  
> > sun8i-h3-orangepi-pc.dtb \
> > 
> > diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> > b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644
> > index 000..88b1e09
> > --- /dev/null
> > +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> > @@ -0,0 +1,65 @@
> > +/*
> > + * Copyright 2015 Chen-Yu Tsai
> > + *
> > + * Chen-Yu Tsai <w...@csie.org>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + *  a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >

[linux-sunxi] Re: [U-Boot] [PATCH] sunxi: Add support for Cubietruck Plus

2016-03-19 Thread Dennis Gilmore 
Hans,

What is the status of this patch?

Dennis

On Wednesday, January 27, 2016 4:34:44 PM CDT Chen-Yu Tsai wrote:
> Cubietruck Plus is a A83T/H8 based development board. The board has
> standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
> via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
> WiFi, headphone out / mic in, and various GPIO headers.
> 
> The board also has an EEPROM on i2c0 which holds the MAC address.
> 
> DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
> is connected to the reset control of the PHY. EMAC is not actually
> supported yet.
> 
> The DTS is the same as the one already in the kernel.
> 
> Signed-off-by: Chen-Yu Tsai 
> ---
>  arch/arm/dts/Makefile   |  1 +
>  arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65
> + configs/Cubietruck_plus_defconfig   |
> 18 
>  3 files changed, 84 insertions(+)
>  create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
>  create mode 100644 configs/Cubietruck_plus_defconfig
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 1c7d359..e338db5 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -184,6 +184,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
>   sun8i-a33-sinlinx-sina33.dtb
>  dtb-$(CONFIG_MACH_SUN8I_A83T) += \
>   sun8i-a83t-allwinner-h8homlet-v2.dtb \
> + sun8i-a83t-cubietruck-plus.dtb \
>   sun8i-a83t-sinovoip-bpi-m3.dtb
>  dtb-$(CONFIG_MACH_SUN8I_H3) += \
>   sun8i-h3-orangepi-pc.dtb \
> diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644
> index 000..88b1e09
> --- /dev/null
> +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> @@ -0,0 +1,65 @@
> +/*
> + * Copyright 2015 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai 
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-a83t.dtsi"
> +
> +/ {
> + model = "Cubietech Cubietruck Plus";
> + compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
> +
> + aliases {
> + serial0 = 
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> + {
> + pinctrl-names = "default";
> + pinctrl-0 = <_pins_b>;
> + status = "okay";
> +};
> diff --git a/configs/Cubietruck_plus_defconfig
> b/configs/Cubietruck_plus_defconfig new file mode 100644
> index 000..bb0b336
> --- /dev/null
> +++ b/configs/Cubietruck_plus_defconfig
> @@ -0,0 +1,18 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN8I_A83T=y
> +CONFIG_DRAM_CLK=672
> +CONFIG_DRAM_ZQ=15355
> +CONFIG_DRAM_ODT_EN=y
> +CONFIG_MMC0_CD_PIN="PF6"
> +CONFIG_I2C0_ENABLE=y
> +CONFIG_AXP_GPIO=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
> +# CONFIG_CMD_IMLS is not

[linux-sunxi] Re: [U-Boot] [PATCH v1 0/9] sunxi: initial upstreamining effort

2014-03-14 Thread Dennis Gilmore 
On Fri, 14 Mar 2014 10:16:42 -0400
Tom Rini tr...@ti.com wrote:

 On Fri, Mar 14, 2014 at 10:33:32AM +, Ian Campbell wrote:
 
  Hi,
  
  This is my first cut at an upstreamable series based upon the
  https://github.com/linux-sunxi/u-boot-sunxi.git#sunxi tree. The
  intention is to present a minimal starting point for upstreaming to
  which support for other processors, peripherals, boards etc can be
  added in the future. Therefore this has been stripped right back and
  currently supports only sun7i processors and the cubietruck
  board. Supported peripherals are UART, MMC and Ethernet.
 
 Some global comments:
 - If you haven't already, make sure it's all checkpatch clean.
 - Use the SPDX tags rather than including the GPL boilerplate.
 - Please re-word the commit messages.  The how we got here / where
 this is from is fine for the cover letter.
 - Magic numbers need to be defined.

I have a quick request also, Please incorporate the ongoing generic
distro work as most if not all of the sunxi systems I know of are
targets for generic distros.

Dennis

-- 
You received this message because you are subscribed to the Google Groups 
linux-sunxi group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.