[linux-sunxi] Re: [PATCH v8 05/11] rtc: sun6i: Add support for broken-down alarm registers
On Sun, 25 Jul 2021 08:11:49 +0200 Jernej Škrabec wrote: Hi Jernej, > Dne petek, 23. julij 2021 ob 17:38:32 CEST je Andre Przywara napisal(a): > > Newer versions of the Allwinner RTC, for instance as found in the H616 > > SoC, not only store the current day as a linear number, but also change > > the way the alarm is handled: There are now two registers, that > > explicitly store the wakeup time, in the same format as the current > > time. > > > > Add support for that variant by writing the requested wakeup time > > directly into the registers, instead of programming the seconds left, as > > the old SoCs required. > > > > Signed-off-by: Andre Przywara > > --- > > drivers/rtc/rtc-sun6i.c | 60 + > > 1 file changed, 43 insertions(+), 17 deletions(-) > > > > diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c > > index a02be8bca6f3..f0ee20bfdccb 100644 > > --- a/drivers/rtc/rtc-sun6i.c > > +++ b/drivers/rtc/rtc-sun6i.c > > @@ -48,7 +48,8 @@ > > > > /* Alarm 0 (counter) */ > > #define SUN6I_ALRM_COUNTER 0x0020 > > -#define SUN6I_ALRM_CUR_VAL 0x0024 > > +/* This holds the remaining alarm seconds on older SoCs (current value) */ > > +#define SUN6I_ALRM_COUNTER_HMS 0x0024 > > #define SUN6I_ALRM_EN 0x0028 > > #define SUN6I_ALRM_EN_CNT_EN BIT(0) > > #define SUN6I_ALRM_IRQ_EN 0x002c > > @@ -523,32 +524,57 @@ static int sun6i_rtc_setalarm(struct device *dev, > struct rtc_wkalrm *wkalrm) > > struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); > > struct rtc_time *alrm_tm = >time; > > struct rtc_time tm_now; > > - time64_t time_now, time_set; > > + time64_t time_set; > > + u32 counter_val, counter_val_hms; > > int ret; > > > > - ret = sun6i_rtc_gettime(dev, _now); > > - if (ret < 0) { > > - dev_err(dev, "Error in getting time\n"); > > - return -EINVAL; > > - } > > - > > time_set = rtc_tm_to_time64(alrm_tm); > > - time_now = rtc_tm_to_time64(_now); > > - if (time_set <= time_now) { > > - dev_err(dev, "Date to set in the past\n"); > > - return -EINVAL; > > - } > > > > - if ((time_set - time_now) > U32_MAX) { > > - dev_err(dev, "Date too far in the future\n"); > > - return -EINVAL; > > + if (chip->flags & RTC_LINEAR_DAY) { > > + time64_t seconds; > > + > > + /* > > +* The alarm registers hold the actual alarm time, > encoded > > +* in the same way (linear day + HMS) as the current > time. > > +*/ > > + counter_val_hms = SUN6I_TIME_SET_SEC_VALUE(alrm_tm- > >tm_sec) | > > + > SUN6I_TIME_SET_MIN_VALUE(alrm_tm->tm_min) | > > + > SUN6I_TIME_SET_HOUR_VALUE(alrm_tm->tm_hour); > > + seconds = mktime64(alrm_tm->tm_year + 1900, alrm_tm- > >tm_mon, > > + alrm_tm->tm_mday, 0, 0, 0); > > While above line should work, it's confusing why you're adding 1900 to years. > In my opinion it would be better to use same trick you used in patch 4 - > rtc_tm_to_time64() with hours, minutes and seconds set to 0. IIRC setalarm does not want the time struct to be changed, but this is OK in settime. But anyway ... > Or maybe you > don't even need to do that, since division by SECS_PER_DAY will round down > anyway. In such way you hide RTC internal representation detail which doesn't > need to be exposed here. That is indeed a very clever idea! I changed both settime and setalarm accordingly now, adding a comment about this. > > Once fixed: > Reviewed by: Jernej Skrabec Many thanks for the reviews! Cheers, Andre > > + counter_val = div_u64(seconds, SECS_PER_DAY); > > + } else { > > + /* The alarm register holds the number of seconds left. > */ > > + time64_t time_now; > > + > > + ret = sun6i_rtc_gettime(dev, _now); > > + if (ret < 0) { > > + dev_err(dev, "Error in getting time\n"); > > + return -EINVAL; > > + } > > + > > + time_now = rtc_tm_to_time64(_now); > > + if (time_set <= time_now) { > > + dev_err(dev, "Date to set in the past\n"); > > + return -EINVAL; > > + } > > + if ((time_set - time_now) > U32_MAX) { > > + dev_err(dev, "Date too far in the future\n"); > > + return -EINVAL; > > + } > > + > > + counter_val = time_set - time_now; > > } > > > > sun6i_rtc_setaie(0, chip); > > writel(0, chip->base + SUN6I_ALRM_COUNTER); > > + if (chip->flags & RTC_LINEAR_DAY) > > + writel(0, chip->base + SUN6I_ALRM_COUNTER_HMS); > > usleep_range(100, 300); > > > > - writel(time_set - time_now, chip->base +
[linux-sunxi] Re: [PATCH v8 05/11] rtc: sun6i: Add support for broken-down alarm registers
Hi Andre! Dne petek, 23. julij 2021 ob 17:38:32 CEST je Andre Przywara napisal(a): > Newer versions of the Allwinner RTC, for instance as found in the H616 > SoC, not only store the current day as a linear number, but also change > the way the alarm is handled: There are now two registers, that > explicitly store the wakeup time, in the same format as the current > time. > > Add support for that variant by writing the requested wakeup time > directly into the registers, instead of programming the seconds left, as > the old SoCs required. > > Signed-off-by: Andre Przywara > --- > drivers/rtc/rtc-sun6i.c | 60 + > 1 file changed, 43 insertions(+), 17 deletions(-) > > diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c > index a02be8bca6f3..f0ee20bfdccb 100644 > --- a/drivers/rtc/rtc-sun6i.c > +++ b/drivers/rtc/rtc-sun6i.c > @@ -48,7 +48,8 @@ > > /* Alarm 0 (counter) */ > #define SUN6I_ALRM_COUNTER 0x0020 > -#define SUN6I_ALRM_CUR_VAL 0x0024 > +/* This holds the remaining alarm seconds on older SoCs (current value) */ > +#define SUN6I_ALRM_COUNTER_HMS 0x0024 > #define SUN6I_ALRM_EN0x0028 > #define SUN6I_ALRM_EN_CNT_EN BIT(0) > #define SUN6I_ALRM_IRQ_EN0x002c > @@ -523,32 +524,57 @@ static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm) > struct sun6i_rtc_dev *chip = dev_get_drvdata(dev); > struct rtc_time *alrm_tm = >time; > struct rtc_time tm_now; > - time64_t time_now, time_set; > + time64_t time_set; > + u32 counter_val, counter_val_hms; > int ret; > > - ret = sun6i_rtc_gettime(dev, _now); > - if (ret < 0) { > - dev_err(dev, "Error in getting time\n"); > - return -EINVAL; > - } > - > time_set = rtc_tm_to_time64(alrm_tm); > - time_now = rtc_tm_to_time64(_now); > - if (time_set <= time_now) { > - dev_err(dev, "Date to set in the past\n"); > - return -EINVAL; > - } > > - if ((time_set - time_now) > U32_MAX) { > - dev_err(dev, "Date too far in the future\n"); > - return -EINVAL; > + if (chip->flags & RTC_LINEAR_DAY) { > + time64_t seconds; > + > + /* > + * The alarm registers hold the actual alarm time, encoded > + * in the same way (linear day + HMS) as the current time. > + */ > + counter_val_hms = SUN6I_TIME_SET_SEC_VALUE(alrm_tm- >tm_sec) | > + SUN6I_TIME_SET_MIN_VALUE(alrm_tm->tm_min) | > + SUN6I_TIME_SET_HOUR_VALUE(alrm_tm->tm_hour); > + seconds = mktime64(alrm_tm->tm_year + 1900, alrm_tm- >tm_mon, > +alrm_tm->tm_mday, 0, 0, 0); While above line should work, it's confusing why you're adding 1900 to years. In my opinion it would be better to use same trick you used in patch 4 - rtc_tm_to_time64() with hours, minutes and seconds set to 0. Or maybe you don't even need to do that, since division by SECS_PER_DAY will round down anyway. In such way you hide RTC internal representation detail which doesn't need to be exposed here. Once fixed: Reviewed by: Jernej Skrabec Best regards, Jernej > + counter_val = div_u64(seconds, SECS_PER_DAY); > + } else { > + /* The alarm register holds the number of seconds left. */ > + time64_t time_now; > + > + ret = sun6i_rtc_gettime(dev, _now); > + if (ret < 0) { > + dev_err(dev, "Error in getting time\n"); > + return -EINVAL; > + } > + > + time_now = rtc_tm_to_time64(_now); > + if (time_set <= time_now) { > + dev_err(dev, "Date to set in the past\n"); > + return -EINVAL; > + } > + if ((time_set - time_now) > U32_MAX) { > + dev_err(dev, "Date too far in the future\n"); > + return -EINVAL; > + } > + > + counter_val = time_set - time_now; > } > > sun6i_rtc_setaie(0, chip); > writel(0, chip->base + SUN6I_ALRM_COUNTER); > + if (chip->flags & RTC_LINEAR_DAY) > + writel(0, chip->base + SUN6I_ALRM_COUNTER_HMS); > usleep_range(100, 300); > > - writel(time_set - time_now, chip->base + SUN6I_ALRM_COUNTER); > + writel(counter_val, chip->base + SUN6I_ALRM_COUNTER); > + if (chip->flags & RTC_LINEAR_DAY) > + writel(counter_val_hms, chip->base + SUN6I_ALRM_COUNTER_HMS); > chip->alarm = time_set; > > sun6i_rtc_setaie(wkalrm->enabled, chip); > -- > 2.17.6 > > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and