RE: [PATCH 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups

[Peter Chen]

 
> On Tue, Oct 16, 2018 at 2:02 AM Peter Chen  wrote:
> >
> > For USB HSIC, the data and strobe pin needs to be pulled down at
> > default, we consider it as "idle" state. When the USB host is ready to
> > be used, the strobe pin needs to be pulled up, we consider it as
> > "active" state.
> >
> > Signed-off-by: Peter Chen 
> > ---
> >  Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > index 529e51879fb2..10c8d793ea49 100644
> > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > @@ -81,6 +81,7 @@ Optional properties:
> >mux state of 1 indicates host mode.
> >  - mux-control-names: Shall be "usb_switch" if mux-controls is specified.
> >  - pinctrl-names: Names for optional pin modes in "default", "host", 
> > "device"
> > +  Or names for HSIC "idle" and "active" pin modes.
> 
> I don't think this description is clear enough.
> 
> Could you please add a real dts snippet for the HSIC case instead?

Ok, I will add example like below at next version.
 usb@02184000 { /* USB OTG */ {
...
pinctrl-names = "idle", "active";
pinctrl-0 = <_usbh2_1>;
pinctrl-1 = <_usbh2_2>;
...
};

Peter

Re: [PATCH 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups

[Fabio Estevam]

Hi Peter,

On Tue, Oct 16, 2018 at 2:02 AM Peter Chen  wrote:
>
> For USB HSIC, the data and strobe pin needs to be pulled down
> at default, we consider it as "idle" state. When the USB host
> is ready to be used, the strobe pin needs to be pulled up,
> we consider it as "active" state.
>
> Signed-off-by: Peter Chen 
> ---
>  Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt 
> b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> index 529e51879fb2..10c8d793ea49 100644
> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> @@ -81,6 +81,7 @@ Optional properties:
>mux state of 1 indicates host mode.
>  - mux-control-names: Shall be "usb_switch" if mux-controls is specified.
>  - pinctrl-names: Names for optional pin modes in "default", "host", "device"
> +  Or names for HSIC "idle" and "active" pin modes.

I don't think this description is clear enough.

Could you please add a real dts snippet for the HSIC case instead?

[PATCH 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups

[Peter Chen]

For USB HSIC, the data and strobe pin needs to be pulled down
at default, we consider it as "idle" state. When the USB host
is ready to be used, the strobe pin needs to be pulled up,
we consider it as "active" state.

Signed-off-by: Peter Chen 
---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt 
b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 529e51879fb2..10c8d793ea49 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -81,6 +81,7 @@ Optional properties:
   mux state of 1 indicates host mode.
 - mux-control-names: Shall be "usb_switch" if mux-controls is specified.
 - pinctrl-names: Names for optional pin modes in "default", "host", "device"
+  Or names for HSIC "idle" and "active" pin modes.
 - pinctrl-n: alternate pin modes
 
 i.mx specific properties
-- 
2.14.1