RE: Re: Suggested module for PCI LAN Card..?
I use the Linksys PCI NIC in my linux router box and it uses the tulip driver without incident. It is running under suse 7.2 with kernel 2.4.16 and runs perfectly every time @ 100 mbps, whereas the realtek 8139 in the same machine can't handle the 2.4.16 kernel and sticks @ 10 mbps. Regards, Keith Boykin Bill Campbell [EMAIL PROTECTED] wrote: On Tue, Feb 05, 2002 at 07:02:52AM -0500, Jerry McBride wrote: On Mon, 04 Feb 2002 18:16:23 -0600 Michael Hipp [EMAIL PROTECTED] wrote: According to LinkSys support page they work fine with the ne2000 driver. Link: http://www.linksys.com/support/support.asp?spid=26 If it's the lne100tx, it'll work better with the tulip drivers... We stopped using the LinkSys NICs because they didn't work all that well with the Tulip drivers unless you used ones with their patches. It's been a couple of years since we last tried this so they may be better now. Bill -- INTERNET: [EMAIL PROTECTED] Bill Campbell; Celestial Software LLC UUCP: camco!bill PO Box 820; 6641 E. Mercer Way FAX:(206) 232-9186 Mercer Island, WA 98040-0820; (206) 236-1676 URL: http://www.celestial.com/ Anyone who cannot cope with mathematics is not fully human. At best he is a tolerable subhuman who has learned to wear shoes, bathe and not make messes in the house. -- Lazarus Long, Time Enough for Love ___ Linux-users mailing list - http://linux.nf/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL. ___ Linux-users mailing list - http://linux.nf/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
RE: Re: Suggested module for PCI LAN Card..?
Netgear is great and rtl8139 has troubles for me above kernel 2.4.4. Bye, Keith B. Jim Conner [EMAIL PROTECTED] wrote: Yeah, since you beat my record uptime of 173 days and some odd hours you can now reboot. :) I have had good luck with 3com and d-link. Although d-link's that use the rtl8039(?) module is broken in kernel 2.4.2 to about 2.4.9(?). I know my d-link wouldn't transmit or recieve packets with 2.4.2 stock W3.1 kernel. I swapped it out for my 3com and it works fine. I've since upgraded to kernel 2.4.16 and haven't put the d-link back in to test it. I've heard good things about netgear and some good and bad about linksys. Jim On Monday, February 04, 2002 7:09, Bill Day wrote: I am about to blow my uptime to throw another NIC into my box, 8^(, but the only ones I havve currently are Linksys EtherPCI LAN Card II's. I have th available PCI slots but I can't seem to find anything on the Caldera Hardware Compatibility about them.. Anyone currently using the mentioned card and if so what module are you using with it. I have a stock eDesktop 2.4 kernel installed and currently an NetGear FA310TX in the box running on a tulip.o module. TIA, -- 10:42am up 5 days, 22:11, 2 users, load average: 0.00, 0.00, 0.00 Running Caldera W3.1 - Linux - because life is too short for reboots... _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ Linux-users mailing list - http://linux.nf/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL. ___ Linux-users mailing list - http://linux.nf/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.