Re: [lmn] bond und trunk

2016-09-27 Diskussionsfäden Jens Baumgärtner
Hallo zusammen,

gibt es nicht doch vielleicht einen Cisco-Experten in der Liste?

Nun gut,
In einem anderen Thread habe ich mal gelesen, dass man sich
einiges an Ärger sparen kann, wenn man auf den Portchannel
verzichtet und eine 10GB-Karte benutzt. Ich habe wie geschrieben
einen 4506 mit Sup IV (WS-X4515). In den Cisco würde auch eine
Sup V-10GE (WS-4516-10GE) passen. Die hätte zudem die doppelte
Backplane mit 136GBit statt 64GBit und hat zwei X2-Slots eingebaut
in die ich zwei X2-10GB-CX4 einbauen könnte. Damit wäre dann eine
10GB-Verbindung zum Serverhost auf eine Intel EXPX9502CX4
NIC möglich.

Was haltet ihr von dieser Option?



Grüße

Jens Baumgärtner
Harzreißerstraße 7
72250 Freudenstadt
Tel. 07441/952050
FAX: 03212 1216120

Am 27.09.2016 um 07:15 schrieb Jens Baumgärtner:
> Hallo,
>
> wir haben folgende Konfiguration
>
>   * Cisco4506 mit WSX4448 (48x 1000Base-T)
>   * Proxmox mit 6x GBit-Karte (3xIntel e1000e und 3xRealtek 8169)
>   * darauf linuxmuster.net 6.1 mit virtIO-NIC
>
> Die sechs Netzwerkleitungen sind zu einem bond (Linux) / Trunk (cisco)
> zusammengefasst und wir trennen die VLAN erst auf dem Proxmox,
> wo sie dann auf verschiedene virtuelle Netzwerkbrücken gelegt sind.
> Das Gleiche habe ich in den Ferien bei unserer Partnerschule gemacht
> wo es jetzt komische Verzögerungen bei den Logins gibt, zusätzlich
> verschwinden nach dem Syncen nach kurzer Zeit die Drucker aus dem
> CUPS (Ubuntu 12.04), was vor den Ferien definitiv nicht so war).
> Ich hoffe, es kennt sich in der Liste jemand gut mit bonding/trunking aus
> und kann mal meine Konfiguration überprüfen:
>
> *auf dem cisco* (IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M),
> Version 12.1(13)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1))
>
> Mod  Ports Card Type  Model Serial No.
> +-+--+-+---
>  1  2  1000BaseX (GBIC) Supervisor(active)WS-X4515  
> JAB071704SS 
>  2 18  1000BaseX (GBIC)   WS-X4418-GB   
> JAE07200C5F 
>  3 18  1000BaseX (GBIC)   WS-X4418-GB   
> JAE07200C4U 
>  4 48  10/100BaseTX (RJ45)WS-X4148  
> JAB0349055E 
>  5 34  10/100BaseTX (RJ45), 1000BaseX (GBIC)  WS-X4232-GB-RJ
> JAE04330085 
>  6 48  10/100/1000BaseTX (RJ45)   WS-X4448-GB-RJ45  
> JAB070805XG 
> - show running-config interfaces po 5 --
> interface Port-channel5
>  switchport
>  switchport trunk encapsulation dot1q
>  switchport mode trunk
>  spanning-tree portfast trunk
> end
> - show interface po 5 --
> Port-channel5 is up, line protocol is up (connected)
>   Hardware is EtherChannel, address is 000b.fdf6.54d8 (bia 000b.fdf6.54d8)
>   MTU 1500 bytes, BW 600 Kbit, DLY 10 usec, 
>  reliability 255/255, txload 1/255, rxload 1/255
>   Encapsulation ARPA, loopback not set
>   Keepalive set (10 sec)
>   Unknown duplex, Unknown Speed, unknown 0
>   output flow-control is unsupported, input flow-control is unsupported
>   Members in this channel: Gi6/25 Gi6/26 Gi6/27 Gi6/28 Gi6/29 Gi6/30 
>   ARP type: ARPA, ARP Timeout 04:00:00
>   Last input never, output never, output hang never
>   Last clearing of "show interface" counters 2w1d
>   Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 1
>   Queueing strategy: fifo
>   Output queue: 0/40 (size/max)
>   5 minute input rate 797000 bits/sec, 89 packets/sec
>   5 minute output rate 19 bits/sec, 88 packets/sec
>  2527233634 packets input, 3536453959673 bytes, 0 no buffer
>  Received 2593156 broadcasts (0 multicast)
>  0 runts, 0 giants, 0 throttles
>  0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
>  0 input packets with dribble condition detected
>  1228207568 packets output, 340175961092 bytes, 0 underruns
>  0 output errors, 0 collisions, 0 interface resets
>  0 babbles, 0 late collision, 0 deferred
>  0 lost carrier, 0 no carrier
>  0 output buffer failures, 0 output buffers swapped out
>
> - show running-config interface gi6/25 -
>
> interface GigabitEthernet6/25
>  switchport trunk encapsulation dot1q
>  switchport mode trunk
>  channel-group 5 mode active
> end
>
> -
> So sehen auch die anderen Konfigurationen der Interfaces des Trunk aus.
> -show interfaces gigabitEthernet 6/25 
> --
> GigabitEthernet6/25 is up, line protocol is up (connected)
>   Hardware is Gigabit Ethernet Port, address is 000b.fdf6.54d8 (bia 
> 000b.fdf6.54d8)
>   MTU 1500 bytes, BW 100 Kbit, DLY 10 usec, 
>  reliability 255/255, txload 1/255, rxload 1/255
>   Encapsulation ARPA, loopback not set
>   Keepalive set (10 sec)
>   Full-duplex, 1000Mb/s, link type is auto, media type is T
>   output flow-control is unsupported, input flow-control is 

[lmn] bond und trunk

2016-09-26 Diskussionsfäden Jens Baumgärtner
Hallo,

wir haben folgende Konfiguration

  * Cisco4506 mit WSX4448 (48x 1000Base-T)
  * Proxmox mit 6x GBit-Karte (3xIntel e1000e und 3xRealtek 8169)
  * darauf linuxmuster.net 6.1 mit virtIO-NIC

Die sechs Netzwerkleitungen sind zu einem bond (Linux) / Trunk (cisco)
zusammengefasst und wir trennen die VLAN erst auf dem Proxmox,
wo sie dann auf verschiedene virtuelle Netzwerkbrücken gelegt sind.
Das Gleiche habe ich in den Ferien bei unserer Partnerschule gemacht
wo es jetzt komische Verzögerungen bei den Logins gibt, zusätzlich
verschwinden nach dem Syncen nach kurzer Zeit die Drucker aus dem
CUPS (Ubuntu 12.04), was vor den Ferien definitiv nicht so war).
Ich hoffe, es kennt sich in der Liste jemand gut mit bonding/trunking aus
und kann mal meine Konfiguration überprüfen:

*auf dem cisco* (IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M),
Version 12.1(13)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1))

Mod  Ports Card Type  Model Serial No.

+-+--+-+---

 1  2  1000BaseX (GBIC) Supervisor(active)WS-X4515  JAB071704SS 

 2 18  1000BaseX (GBIC)   WS-X4418-GB   JAE07200C5F 

 3 18  1000BaseX (GBIC)   WS-X4418-GB   JAE07200C4U 

 4 48  10/100BaseTX (RJ45)WS-X4148  JAB0349055E 

 5 34  10/100BaseTX (RJ45), 1000BaseX (GBIC)  WS-X4232-GB-RJJAE04330085 

 6 48  10/100/1000BaseTX (RJ45)   WS-X4448-GB-RJ45  JAB070805XG 

- show running-config interfaces po 5 --

interface Port-channel5
 switchport
 switchport trunk encapsulation dot1q
 switchport mode trunk
 spanning-tree portfast trunk
end

- show interface po 5 --

Port-channel5 is up, line protocol is up (connected)
  Hardware is EtherChannel, address is 000b.fdf6.54d8 (bia 000b.fdf6.54d8)
  MTU 1500 bytes, BW 600 Kbit, DLY 10 usec, 
 reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Unknown duplex, Unknown Speed, unknown 0
  output flow-control is unsupported, input flow-control is unsupported
  Members in this channel: Gi6/25 Gi6/26 Gi6/27 Gi6/28 Gi6/29 Gi6/30 
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters 2w1d
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 1
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 797000 bits/sec, 89 packets/sec
  5 minute output rate 19 bits/sec, 88 packets/sec
 2527233634 packets input, 3536453959673 bytes, 0 no buffer
 Received 2593156 broadcasts (0 multicast)
 0 runts, 0 giants, 0 throttles
 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
 0 input packets with dribble condition detected
 1228207568 packets output, 340175961092 bytes, 0 underruns
 0 output errors, 0 collisions, 0 interface resets
 0 babbles, 0 late collision, 0 deferred
 0 lost carrier, 0 no carrier
 0 output buffer failures, 0 output buffers swapped out

- show running-config interface gi6/25 -

interface GigabitEthernet6/25
 switchport trunk encapsulation dot1q
 switchport mode trunk
 channel-group 5 mode active
end

-

So sehen auch die anderen Konfigurationen der Interfaces des Trunk aus.

-show interfaces gigabitEthernet 6/25 --

GigabitEthernet6/25 is up, line protocol is up (connected)

  Hardware is Gigabit Ethernet Port, address is 000b.fdf6.54d8 (bia 
000b.fdf6.54d8)

  MTU 1500 bytes, BW 100 Kbit, DLY 10 usec, 

 reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  Keepalive set (10 sec)

  Full-duplex, 1000Mb/s, link type is auto, media type is T

  output flow-control is unsupported, input flow-control is unsupported

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:04, output never, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 1000 bits/sec, 2 packets/sec

  5 minute output rate 17000 bits/sec, 23 packets/sec

 617740848 packets input, 820563575012 bytes, 0 no buffer

 Received 485417 broadcasts (0 multicast)

 0 runts, 0 giants, 0 throttles

 4 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

 0 input packets with dribble condition detected

 831603071 packets output, 277502479156 bytes, 0 underruns

 0 output errors, 0 collisions, 0 interface resets

 0 babbles, 0 late collision, 0 deferred

 0 lost carrier, 0 no carrier

 0 output buffer failures, 0 output buffers swapped out



*
auf dem ProxMox:

*