Newer firmware versions return physical port information to the partition,
so hand that information to the consumer if it's present.

Signed-off-by: Joachim Fenkes <[EMAIL PROTECTED]>
---
 drivers/infiniband/hw/ehca/ehca_hca.c |   20 ++++++++++++++------
 drivers/infiniband/hw/ehca/hipz_hw.h  |    6 +++++-
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c 
b/drivers/infiniband/hw/ehca/ehca_hca.c
index 15806d1..5bd7b59 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -151,7 +151,6 @@ int ehca_query_port(struct ib_device *ibdev,
        }
 
        memset(props, 0, sizeof(struct ib_port_attr));
-       props->state = rblock->state;
 
        switch (rblock->max_mtu) {
        case 0x1:
@@ -188,11 +187,20 @@ int ehca_query_port(struct ib_device *ibdev,
        props->subnet_timeout  = rblock->subnet_timeout;
        props->init_type_reply = rblock->init_type_reply;
 
-       props->active_width    = IB_WIDTH_12X;
-       props->active_speed    = 0x1;
-
-       /* at the moment (logical) link state is always LINK_UP */
-       props->phys_state      = 0x5;
+       if (rblock->state && rblock->phys_width) {
+               props->phys_state      = rblock->phys_pstate;
+               props->state           = rblock->phys_state;
+               props->active_width    = rblock->phys_width;
+               props->active_speed    = rblock->phys_speed;
+       } else {
+               /* old firmware releases don't report physical
+                * port info, so use default values
+                */
+               props->phys_state      = 5;
+               props->state           = rblock->state;
+               props->active_width    = IB_WIDTH_12X;
+               props->active_speed    = 0x1;
+       }
 
 query_port1:
        ehca_free_fw_ctrlblock(rblock);
diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h 
b/drivers/infiniband/hw/ehca/hipz_hw.h
index d9739e5..485b840 100644
--- a/drivers/infiniband/hw/ehca/hipz_hw.h
+++ b/drivers/infiniband/hw/ehca/hipz_hw.h
@@ -402,7 +402,11 @@ struct hipz_query_port {
        u64 max_msg_sz;
        u32 max_mtu;
        u32 vl_cap;
-       u8  reserved2[1900];
+       u32 phys_pstate;
+       u32 phys_state;
+       u32 phys_speed;
+       u32 phys_width;
+       u8  reserved2[1884];
        u64 guid_entries[255];
 } __attribute__ ((packed));
 
-- 
1.5.2


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to