Re: 2.6.24-rc1 freezes on powerbook at first boot stage
[FWIW, my powerbook worked with -rc1] 2.6.24-rc2 works so lala :) b43 doesn't authenticate via wpa (bluetooth isn't loaded): WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 5 value 0x1 - Internet Systems Consortium DHCP Client V3.1.0 Those error messages are unrelated. My b43 works fine, even with a multi-MAC patch. TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered sysctl table check failed: /kernel .1 Writable sysctl directory Call Trace: [c1061e60] [c0008b28] show_stack+0x4c/0x1ac (unreliable) [c1061ea0] [c0047354] set_fail+0x50/0x68 [c1061ec0] [c0047784] sysctl_check_table+0x418/0x714 [c1061f30] [c00335b8] register_sysctl_table+0x64/0xb4 [c1061f50] [c033fd5c] register_powersave_nap_sysctl+0x18/0x2c [c1061f60] [c03391e4] kernel_init+0xc0/0x2a0 [c1061ff0] [c0011a58] kernel_thread+0x44/0x60 This has been fixed. There is a lot to do, but it seems to be a big, big code change in that version. This impressed me by looking at the git changes and the size of patches. And the rc's don't seem to be frozend versions. A lot of new code comes in Let me know whether a complete dmesg is needed. What is the problem? Why is this on wireless? It'd help if you'd make one message per problem and post it to the correct mailing lists. johannes signature.asc Description: This is a digitally signed message part ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
Re: 2.6.24-rc1 freezes on powerbook at first boot stage
On Sat, 03 Nov 2007 the mental interface of Nathan Lynch told: (cc'ing linuxppc-dev, see http://www.mail-archive.com/[EMAIL PROTECTED]/msg221770.html for original post and .config) [...] console handover: boot [udbg0] - real [tty0] Does 2.6.23 (or any earlier kernel) work? The powerbook runs Linux since 2.6.12. The config is generated always by make oldconfig and checking new options for meaningful use. If I have time, I test rc versions. Thanks for cooperation :) Elimar -- Experience is something you don't get until just after you need it! ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
Re: 2.6.24-rc1 freezes on powerbook at first boot stage
(cc'ing linuxppc-dev, see http://www.mail-archive.com/[EMAIL PROTECTED]/msg221770.html for original post and .config) Elimar Riesebieter wrote: On Wed, 24 Oct 2007 the mental interface of Elimar Riesebieter told: [...] The kernel is loaded from firmware but freezes at the moment to load the radeon framebuffer. I can't get any debug info (don't know how?). Screen dump till freeze: Using PowerMac machine description Total memory = 1024MB; using 2048kB for hash table (at cfe0) Linux version 2.6.24-rc1-aragorn ([EMAIL PROTECTED]) (gcc version 4.2.3 20071014 (prelelease) (Debian 4.2.2-3)) #1 Wed Oct 24 12:48:27 CEST 2007 Found UniNorth memory controller host bridge @ 0xf800 revision: 0xd2 Mapped at 0xfdfc Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf4 PowerMac motherboard: PowerBook G4 15 console [udbg0] enabled setup_arch: bootmem Found UniNorth PCI host bridge at 0xf000. Firmware bus number: 0-1 Found UniNorth PCI host bridge at 0xf200. Firmware bus number: 0-1 Found UniNorth PCI host bridge at 0xf400. Firmware bus number: 0-1 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=741, gen1=740 nvram: Active bank is: 0 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 arch: exit Zone PFN ranges: DMA 0 - 196608 Normal 196608 - 196608 HighMem196608 - 262144 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0:0 - 262144 Built 1 zonelists in Zone order. Total pages: 260096 Kernel command line: root=/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]:5 root=/dev/hda5 mpic: Setting up MPIC MPIC 1version 1.2 at 8004, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources PID hash table entries: 4096 (order: 12, 16384 bytes) GMT Delta read from XPRAM: 0 minutes, DST: off clocksource: timebase mult[d9038e4] shift [22] registered clockevent: decremeter mult[4b7] shift[16] cpu[0] Console: colour dummy device 80x25 console handover: boot [udbg0] - real [tty0] Does 2.6.23 (or any earlier kernel) work? ___ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
