Sorry, Please ignore this patch.
This is replaced.
Replace by: http://patchwork.ozlabs.org/patch/250032/
- dongsheng
-Original Message-
From: Wang Dongsheng-B40534
Sent: Sunday, June 09, 2013 1:21 PM
To: johan...@sipsolutions.net; an...@enomsg.org; Wood Scott-B07421
Cc: ga...@kernel.crashing.org; linuxppc-dev@lists.ozlabs.org; Wang
Dongsheng-B40534
Subject: [PATCH v2 1/2] powerpc: add Book E support to 64-bit hibernation
Update the 64-bit hibernation code to support Book E CPUs.
Some registers and instructions are not defined for Book3e
(SDR reg, tlbia instruction).
SDR: Storage Description Register. Book3S and Book3E have different
address translation mode, we do not need HTABORG HTABSIZE to
translate virtual address to real address.
More registers are saved in BookE-64bit.(TCR, SPRGx, ...)
Signed-off-by: Wang Dongsheng dongsheng.w...@freescale.com
---
v2:
* Add: _tlbil_all
*
* The boot core get a virtual address, when the boot process,
* the virtual address corresponds to a physical address. After
* hibernation resume memory snapshots, The corresponding
* relationship between the virtual memory and physical memory
* might change again. We need to get a new page table. So we
* need to invalidate TLB after resume pages.
*
* Invalidations TLB Using tlbilx/tlbivax/MMUCSR0.
* tlbilx used here.
*
* Add: save/restore PID
*
* We must restore PID register, because TLB will use PID. The
* hibernation suspend flow is trapped from user space to kernel
* space, the PID register is user thread pid.
*
* The hibernation resume is begin in kernel start flow, the PID
* alway 0. After the kernel thread back to user thread, there is
* not have context switch and the pid can not update, because the
* kernel thread is trapped form user space. So if we did't restore
* PID the user space of thread will be addressing in the kernel
* space.
*
* There are two ways to restore PID:
* 1/ In this file save/resotre PID register.
* 2/ Form restore_processor_state to restore. this function will
*do context switch.
*switch_mmu_context(current-active_mm, current-active_mm)
*
* PPC32 Using the second method. For consistency reason, PPC64
* using the same way.
*
* History:
* Wood Scott(A): Please investigate the issue of whether we are loading
*kernel module code in this step
* R: Kernel will allocate the memory for module code segment and data
*segment. First allocate a memory, and copy the umod to hdr members
*of the struct load_info. Due to the temporary assigned module
belongs
*to the kernel space, so it belongs to the kernel data.
*
*The kernel of all data will be saved when hibernation suspend. So
*the module which has already been inserted will be saved.
arch/powerpc/kernel/swsusp_asm64.S | 102
-
1 file changed, 100 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/swsusp_asm64.S
b/arch/powerpc/kernel/swsusp_asm64.S
index 86ac1d9..c7e2b4a 100644
--- a/arch/powerpc/kernel/swsusp_asm64.S
+++ b/arch/powerpc/kernel/swsusp_asm64.S
@@ -46,10 +46,30 @@
#define SL_r29 0xe8
#define SL_r30 0xf0
#define SL_r31 0xf8
-#define SL_SIZE SL_r31+8
+#define SL_SPRG0 0x100
+#define SL_SPRG1 0x108
+#define SL_SPRG2 0x110
+#define SL_SPRG3 0x118
+#define SL_SPRG4 0x120
+#define SL_SPRG5 0x128
+#define SL_SPRG6 0x130
+#define SL_SPRG7 0x138
+#define SL_TCR 0x140
+#define SL_PID 0x148
+#define SL_SIZE SL_PID+8
/* these macros rely on the save area being
* pointed to by r11 */
+
+#define SAVE_SPR(register) \
+ mfspr r0,SPRN_##register ;\
+ std r0,SL_##register(r11)
+#define RESTORE_SPR(register)\
+ ld r0,SL_##register(r11) ;\
+ mtspr SPRN_##register,r0
+#define RESTORE_SPRG(n) \
+ ld r0,SL_SPRG##n(r11) ;\
+ mtsprg n,r0
#define SAVE_SPECIAL(special)\
mf##special r0 ;\
std r0, SL_##special(r11)
@@ -103,8 +123,22 @@ _GLOBAL(swsusp_arch_suspend)
SAVE_REGISTER(r30)
SAVE_REGISTER(r31)
SAVE_SPECIAL(MSR)
- SAVE_SPECIAL(SDR1)
SAVE_SPECIAL(XER)
+#ifdef CONFIG_PPC_BOOK3S_64
+ SAVE_SPECIAL(SDR1)
+#else
+ SAVE_SPR(TCR)
+ /* Save SPRGs */
+ SAVE_SPR(SPRG0)
+ SAVE_SPR(SPRG1)
+ SAVE_SPR(SPRG2)
+ SAVE_SPR(SPRG3)
+ SAVE_SPR(SPRG4)
+ SAVE_SPR(SPRG5)
+ SAVE_SPR(SPRG6)
+ SAVE_SPR(SPRG7)
+ SAVE_SPR(PID);
+#endif
/* we push the stack up 128 bytes but don't store the
* stack pointer on the stack like a real stackframe */
@@ -151,6 +185,7 @@ copy_page_loop:
bne+copyloop
nothing_to_copy:
+#ifdef CONFIG_PPC_BOOK3S_64
/* flush caches */
lis
