[pfSense] PRIVATE WAN CAN NOT PING PRIVATE LOCAL NETWORK
Hello All, Hope your all well. I need some assistance.I have setup my pfsense system as below. WAN IP (IP from ISP) on Pfsense (10.20.5.1/24)-- LOCAL LAN IP on Pfsense (192.168.0.0/22) From the diagnosis on my Pfsense, i can ping from my WAN (10.20.5.2 as source) to LAN Interface. I can not however ping any workstation on the local network for example: 192.168.1.4. I can of course ping the IP: 192.168.1.4 from the LAN interface as the source under my diagnosis. Internet Access is available. I just want to be able to get to the local IP's on the LAN network from the WAN Interface. Has anyone faced this or can anyone advise. Thanks alot. BR, Halonda Denis Enock. Tel: +256 (0) 772 840 763. SMS Text: +256 (0) 772 840 763. Email: ehalo...@yahoo.com Yahoo Chat ID: ehalonda Skype ID: enock.halonda In a time of Universal deceit, telling the truth is a revolutionary act, George Orwell.___ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list
Re: [pfSense] PRIVATE WAN CAN NOT PING PRIVATE LOCAL NETWORK
On 04/09/2014 09:58, Enock Halonda wrote: Hello All, Hope your all well. I need some assistance.I have setup my pfsense system as below. WAN IP (IP from ISP) on Pfsense (10.20.5.1/24)-- LOCAL LAN IP on Pfsense (192.168.0.0/22) From the diagnosis on my Pfsense, i can ping from my WAN (10.20.5.2 as source) to LAN Interface. I can not however ping any workstation on the local network for example: 192.168.1.4. I can of course ping the IP: 192.168.1.4 from the LAN interface as the source under my diagnosis. Internet Access is available. I just want to be able to get to the local IP's on the LAN network from the WAN Interface. Has anyone faced this or can anyone advise. Thanks alot. For starters, you would need a rule to allow inbound traffic from your WAN to your LAN, pfsense by its nature, blocks inbound traffic on the WAN interface. Secondly, you will need to uncheck Block private networks on your WAN interface. Lastly, I'm assuming that you have disabled NAT already, and that your ISP is doing NAT for both your LAN and WAN subnets. -- Regards, Giles Coochey, CCNP, CCNA, CCNAS NetSecSpec Ltd +44 (0) 8444 780677 +44 (0) 7584 634135 http://www.coochey.net http://www.netsecspec.co.uk gi...@coochey.net smime.p7s Description: S/MIME Cryptographic Signature ___ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list
Re: [pfSense] How do I fix this?
The price was right but yes it consumes some power. Its loud and warms the room. Should be good in another month or so when we turn the furnace on. As for the nics I have no idea if their intel or not. Don't recall that detail. I'll try your suggestion and change the time and see what happens. On 9/3/2014 3:40 PM, compdoc wrote: I have tried the alternate IP. No change. Not sure what the other two do? Some connections might be slow to respond occasionally, or not handle constant pings well. You can send fewer pings, (every 3 seconds for instance) and wait a longer period of time before declaring the link is down. (like 30 seconds or so) The hardware is a dell 2850, i have a 15x1 cable connection. If you have nothing better to do with the PowerEdge, might as well use it. They look like they might consume some watts, though. Yours has only Intel nics? ___ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list ___ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list
[pfSense] After upgrading 2.1.3-2.1.5 the SNMP.pm can't be found for Nagios anymore
Gents, after upgrading to 2.1.5, coming from 2.1.3 PFSense all of a sudden lost it's Net/SNMP.pm from it's path. This results in issues with some plugins of Nagios. e.g. /usr/pbi/nrpe-amd64/libexec/nagios/check_ifoperstatus which barfs : Can't locate Net/SNMP.pm in @INC (@INC contains: /usr/pbi/nrpe-amd64/libexec/nagios /usr/pbi/nrpe-amd64/lib/perl5/5.14.2/BSDPAN /usr/pbi/nrpe-amd64/lib/perl5/site_perl/5.14.2/mach /usr/pbi/nrpe-amd64/lib/perl5/site_perl/5.14.2 /usr/pbi/nrpe-amd64/lib/perl5/5.14.2/mach /usr/pbi/nrpe-amd64/lib/perl5/5.14.2 .) at /usr/pbi/nrpe-amd64/libexec/nagios/check_ifoperstatus line 40. BEGIN failed--compilation aborted at /usr/pbi/nrpe-amd64/libexec/nagios/check_ifoperstatus line 40. I guess something went wrong in the Perl dependencies. What is advised to get out of this situation? thx! ___ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list