[pfSense] squid and squidguard versions
Would someone please be able to shed some light on the difference between the squid3 and squid3-dev packages for 2.1.5? And what is the difference between the squidGuard, squidGuard-squid3, and squidGuard-devel packages for pfsense 2.2? Which one should one use with squid3 (on 2.2)? It would be really useful if someone could update the descriptions that show up on https://pfsense.localdomain/pkg_mgr.php for all these packages. Thanks muchly, Volker -- Volker Kuhlmann http://volker.top.geek.nz/ Please do not CC list postings to me. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Release 2.2 - more problems than success by upgrades / looping packet installations / sshd is not working any more / crashes on X5550 CPU
2015-01-27 22:13 GMT+01:00 Chris Buechler c...@pfsense.com: we have general problems with v2.2 I tried to update 13 devices, and only some worked fine (1 ALIX), and one virtual machine (afterwards crashes see below) Most we had problems, e.g: - looping packet installations without ending - reboot is not solving it In what circumstance? after launching the amd64 based pfsense to make an upgrade from 2.1.5 to v.2.2 via webgui, it installs the upgrade, and then reinstalls all packages this never ends also a reboot will not solve this / brake package installation loop Intel X5550 Issue under VMware ESXi 5.1 - crashes on ALL machines which run under VMware ESXi 5.1 on CPU: There has to be some difference between this and the other outside of the CPU. Some configuration difference, or something. What are you using on these that you aren't on the others? all use same packages and same plattform, and same sevices: packages: - squid - lightsquid - open-vm-tools - cron - autoconfigbackup other vm's with only: packages: - open-vm-tools - cron - autoconfigbackup have same issue I tested also on different hosts (3x same HP DL 380 G6 with same CPU's) same issue also I thried without any package: - crashes services used: - DNS Forwarder - OpenVPN - Firewall for sure ;) - HA - Limiters all worked fine under v2.1.5 The only crashing scenario I've found in release is limiters+HA as noted in the upgrade guide. https://doc.pfsense.org/index.php/Upgrade_Guide uh, may have ignored that fact - yes - limiters HA well, question: - disabling the limiters would solve this issue in meantime ? - or do I have to delete all limiters but: on other CPU under VMware ESX5.1 I have release 2.2 WITH HA AND limiters up and running without problems strange so, would help If you anser upper questions - I will do some test here Many thanks for the helpinng hint Best regards Stephan ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100
Hi again, BQ_BEGIN BQ_BEGIN well, no kernel crash ? no kernel crash after upgrade BQ_END answering myself, seems to be this problem: https://redmine.pfsense.org/issues/3749 I'll try the workaround at https://redmine.pfsense.org/projects/pfsense/repository/revisions/720c529f2890708c8dca6264924ec5b1afbf0daf BQ_END Definetly, my problem was due to this error in the upgrade log: x ./tmp/pre_upgrade_command: Cannot extract through symlink tmp tar: Error exit delayed from previous errors. chmod: /tmp/pre_upgrade_command: No such file or directory /tmp/pre_upgrade_command: Can't open /tmp/pre_upgrade_command: No such file or directory Because of my tmp was a symlink to /var/tmp, the pre_upgrade_command script couldn't be untared, and the situation was the same as of pfSense 2.1.4 (this is pfSense 2.1.5) as explained in the bug 3749. Now, my system is upgraded (and limiters disabled) Maybe can be checked this before upgrading (for pfSense 2.2.1), I can't remember if I manually tweaked /tmp or it was in this way when installed (as of pfSense 2.0.1) and survived on upgrades. Thanks again BQ_BEGIN BQ_BEGIN BQ_BEGIN if kernel crashs: seems to me you did the same mistake like me: setup with HA and limiters ? BQ_END i read the note, i'm using limiters on a separate VLAN (not LAN) and i thought to test if it crashes. i think we must wait this issue to be solved, isn't it? :( thanks and regards BQ_BEGIN see: https://doc.pfsense.org/index.php/Upgrade_Guide#Limiters_with_High_Availability_not_working br stephan 2015-01-28 10:47 GMT+01:00 Toni Garcia toni.gar...@sistel.es : BQ_BEGIN I'm trying to upgrade my HA firewall, starting from the secondary CARP member, but with no success. I tried from BUI and CLI (downloading and verifying md5 also) but after complete the firmware upgrade process, the device doesn't reboot by itself (and rebooting takes it to an inconsistent state, boot loop'ing...) This is the CLI output: 0) Logout (SSH only) 8) Shell 1) Assign Interfaces 9) pfTop 2) Set interface(s) IP address 10) Filter Logs 3) Reset webConfigurator password 11) Restart webConfigurator 4) Reset to factory defaults 12) pfSense Developer Shell 5) Reboot system 13) Upgrade from console 6) Halt system 14) Disable Secure Shell (sshd) 7) Ping host 15) Restore recent configuration Enter an option: 13 Starting the pfSense console firmware update system.. 1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 2 Enter the complete path to the .tgz or .img.gz update file: /root/pfSense-Full-Update-2.2-RELEASE-amd64.tgz One moment please... Broadcast Message from ad...@selene2.sistel.es (no tty) at 10:04 CET... Firmware upgrade in progress... Done. Rebooting... After this, the console menu reappears and every command fails with a Out of file descriptors message (also rebooting is impossible, only but pressing the power button) I've checked and no firmware process is running after the Rebooting message. Any idea on what could be the problem? There's a full upgrade log? Thanks -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold BQ_END ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold BQ_END -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail.
Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100
well, no kernel crash ? if kernel crashs: seems to me you did the same mistake like me: setup with HA and limiters ? see: https://doc.pfsense.org/index.php/Upgrade_Guide#Limiters_with_High_Availability_not_working br stephan 2015-01-28 10:47 GMT+01:00 Toni Garcia toni.gar...@sistel.es: I'm trying to upgrade my HA firewall, starting from the secondary CARP member, but with no success. I tried from BUI and CLI (downloading and verifying md5 also) but after complete the firmware upgrade process, the device doesn't reboot by itself (and rebooting takes it to an inconsistent state, boot loop'ing...) This is the CLI output: 0) Logout (SSH only) 8) Shell 1) Assign Interfaces 9) pfTop 2) Set interface(s) IP address 10) Filter Logs 3) Reset webConfigurator password11) Restart webConfigurator 4) Reset to factory defaults 12) pfSense Developer Shell 5) Reboot system 13) Upgrade from console 6) Halt system 14) Disable Secure Shell (sshd) 7) Ping host 15) Restore recent configuration Enter an option: 13 Starting the pfSense console firmware update system.. 1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 2 Enter the complete path to the .tgz or .img.gz update file: /root/pfSense-Full-Update-2.2-RELEASE-amd64.tgz One moment please... Broadcast Message from ad...@selene2.sistel.es (no tty) at 10:04 CET... Firmware upgrade in progress... Done. Rebooting... After this, the console menu reappears and every command fails with a Out of file descriptors message (also rebooting is impossible, only but pressing the power button) I've checked and no firmware process is running after the Rebooting message. Any idea on what could be the problem? There's a full upgrade log? Thanks -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100
De: Toni Garcia toni.gar...@sistel.es Para: pfSense Support and Discussion Mailing List list@lists.pfsense.org Enviados: Miércoles, 28 de Enero 2015 13:37:03 Asunto: Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100 BQ_BEGIN well, no kernel crash ? no kernel crash after upgrade BQ_END answering myself, seems to be this problem: https://redmine.pfsense.org/issues/3749 I'll try the workaround at https://redmine.pfsense.org/projects/pfsense/repository/revisions/720c529f2890708c8dca6264924ec5b1afbf0daf BQ_BEGIN BQ_BEGIN if kernel crashs: seems to me you did the same mistake like me: setup with HA and limiters ? BQ_END i read the note, i'm using limiters on a separate VLAN (not LAN) and i thought to test if it crashes. i think we must wait this issue to be solved, isn't it? :( thanks and regards BQ_BEGIN see: https://doc.pfsense.org/index.php/Upgrade_Guide#Limiters_with_High_Availability_not_working br stephan 2015-01-28 10:47 GMT+01:00 Toni Garcia toni.gar...@sistel.es : BQ_BEGIN I'm trying to upgrade my HA firewall, starting from the secondary CARP member, but with no success. I tried from BUI and CLI (downloading and verifying md5 also) but after complete the firmware upgrade process, the device doesn't reboot by itself (and rebooting takes it to an inconsistent state, boot loop'ing...) This is the CLI output: 0) Logout (SSH only) 8) Shell 1) Assign Interfaces 9) pfTop 2) Set interface(s) IP address 10) Filter Logs 3) Reset webConfigurator password 11) Restart webConfigurator 4) Reset to factory defaults 12) pfSense Developer Shell 5) Reboot system 13) Upgrade from console 6) Halt system 14) Disable Secure Shell (sshd) 7) Ping host 15) Restore recent configuration Enter an option: 13 Starting the pfSense console firmware update system.. 1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 2 Enter the complete path to the .tgz or .img.gz update file: /root/pfSense-Full-Update-2.2-RELEASE-amd64.tgz One moment please... Broadcast Message from ad...@selene2.sistel.es (no tty) at 10:04 CET... Firmware upgrade in progress... Done. Rebooting... After this, the console menu reappears and every command fails with a Out of file descriptors message (also rebooting is impossible, only but pressing the power button) I've checked and no firmware process is running after the Rebooting message. Any idea on what could be the problem? There's a full upgrade log? Thanks -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold BQ_END ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold BQ_END -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold BQ_END -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental
[pfSense] Problem upgrading pfSense on Sun Fire x4100
I'm trying to upgrade my HA firewall, starting from the secondary CARP member, but with no success. I tried from BUI and CLI (downloading and verifying md5 also) but after complete the firmware upgrade process, the device doesn't reboot by itself (and rebooting takes it to an inconsistent state, boot loop'ing...) This is the CLI output: 0) Logout (SSH only) 8) Shell 1) Assign Interfaces 9) pfTop 2) Set interface(s) IP address 10) Filter Logs 3) Reset webConfigurator password 11) Restart webConfigurator 4) Reset to factory defaults 12) pfSense Developer Shell 5) Reboot system 13) Upgrade from console 6) Halt system 14) Disable Secure Shell (sshd) 7) Ping host 15) Restore recent configuration Enter an option: 13 Starting the pfSense console firmware update system.. 1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 2 Enter the complete path to the .tgz or .img.gz update file: /root/pfSense-Full-Update-2.2-RELEASE-amd64.tgz One moment please... Broadcast Message from ad...@selene2.sistel.es (no tty) at 10:04 CET... Firmware upgrade in progress... Done. Rebooting... After this, the console menu reappears and every command fails with a Out of file descriptors message (also rebooting is impossible, only but pressing the power button) I've checked and no firmware process is running after the Rebooting message. Any idea on what could be the problem? There's a full upgrade log? Thanks -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100
De: WolfSec-Support supp...@wolfsec.ch Para: pfSense Support and Discussion Mailing List list@lists.pfsense.org Enviados: Miércoles, 28 de Enero 2015 10:53:34 Asunto: Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100 well, no kernel crash ? no kernel crash after upgrade if kernel crashs: seems to me you did the same mistake like me: setup with HA and limiters ? i read the note, i'm using limiters on a separate VLAN (not LAN) and i thought to test if it crashes. i think we must wait this issue to be solved, isn't it? :( thanks and regards see: https://doc.pfsense.org/index.php/Upgrade_Guide#Limiters_with_High_Availability_not_working br stephan 2015-01-28 10:47 GMT+01:00 Toni Garcia toni.gar...@sistel.es : I'm trying to upgrade my HA firewall, starting from the secondary CARP member, but with no success. I tried from BUI and CLI (downloading and verifying md5 also) but after complete the firmware upgrade process, the device doesn't reboot by itself (and rebooting takes it to an inconsistent state, boot loop'ing...) This is the CLI output: 0) Logout (SSH only) 8) Shell 1) Assign Interfaces 9) pfTop 2) Set interface(s) IP address 10) Filter Logs 3) Reset webConfigurator password 11) Restart webConfigurator 4) Reset to factory defaults 12) pfSense Developer Shell 5) Reboot system 13) Upgrade from console 6) Halt system 14) Disable Secure Shell (sshd) 7) Ping host 15) Restore recent configuration Enter an option: 13 Starting the pfSense console firmware update system.. 1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 2 Enter the complete path to the .tgz or .img.gz update file: /root/pfSense-Full-Update-2.2-RELEASE-amd64.tgz One moment please... Broadcast Message from ad...@selene2.sistel.es (no tty) at 10:04 CET... Firmware upgrade in progress... Done. Rebooting... After this, the console menu reappears and every command fails with a Out of file descriptors message (also rebooting is impossible, only but pressing the power button) I've checked and no firmware process is running after the Rebooting message. Any idea on what could be the problem? There's a full upgrade log? Thanks -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Problem upgrading pfSense on Sun Fire x4100
well, no kernel crash ? no kernel crash after upgrade answering myself, seems to be this problem: https://redmine.pfsense.org/issues/3749 I'll try the workaround at https://redmine.pfsense.org/projects/pfsense/repository/revisions/720c529f2890708c8dca6264924ec5b1afbf0daf if kernel crashs: seems to me you did the same mistake like me: setup with HA and limiters ? i read the note, i'm using limiters on a separate VLAN (not LAN) and i thought to test if it crashes. i think we must wait this issue to be solved, isn't it? :( thanks and regards see: https://doc.pfsense.org/index.php/Upgrade_Guide#Limiters_with_High_Availability_not_working br stephan 2015-01-28 10:47 GMT+01:00 Toni Garcia toni.gar...@sistel.es : I'm trying to upgrade my HA firewall, starting from the secondary CARP member, but with no success. I tried from BUI and CLI (downloading and verifying md5 also) but after complete the firmware upgrade process, the device doesn't reboot by itself (and rebooting takes it to an inconsistent state, boot loop'ing...) This is the CLI output: 0) Logout (SSH only) 8) Shell 1) Assign Interfaces 9) pfTop 2) Set interface(s) IP address 10) Filter Logs 3) Reset webConfigurator password 11) Restart webConfigurator 4) Reset to factory defaults 12) pfSense Developer Shell 5) Reboot system 13) Upgrade from console 6) Halt system 14) Disable Secure Shell (sshd) 7) Ping host 15) Restore recent configuration Enter an option: 13 Starting the pfSense console firmware update system.. 1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 2 Enter the complete path to the .tgz or .img.gz update file: /root/pfSense-Full-Update-2.2-RELEASE-amd64.tgz One moment please... Broadcast Message from ad...@selene2.sistel.es (no tty) at 10:04 CET... Firmware upgrade in progress... Done. Rebooting... After this, the console menu reappears and every command fails with a Out of file descriptors message (also rebooting is impossible, only but pressing the power button) I've checked and no firmware process is running after the Rebooting message. Any idea on what could be the problem? There's a full upgrade log? Thanks -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold -- Toni Garcia Técnico de Sistemas Oracle Linux 6 Certified Implementation Specialist Oracle Certified Professional Solaris 10 System Administrator Oracle Certified Associate Solaris 11 System Administrator SISTEL Servicios Informáticos de Software y Telecomunicaciones Avd. Los Jarales, 4 (03010) ALICANTE TLF 965930080 - FAX 901021558 www.sistel.es Por favor recuerda tu responsabilidad medioambiental antes de imprimir este e-mail. / Please consider your environmental responsibility before printing this e-mail. ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE Via Padlock
On Mon, January 26, 2015 23:34, Nenhum_de_Nos wrote: On Mon, January 26, 2015 09:16, Nenhum_de_Nos wrote: On Sun, January 25, 2015 22:59, Peder Rovelstad wrote: Hello. Has Via Padlock Hardware Crypto support been disabled in pfSense/FreeBSD 10? Not a big deal for me as I can stay on 2.1.5, but may be for others. Also, when will x86 support disappear entirely? Burdened by old hardware here... Thanks. Hi, amd64 images can run on net6501 already ? the soekris board has a acpi issue that would make the amd64 kernel need one extra kernel conf line. I will try and tell here. matheus Unfortunately, its no good. 1 pfSense 2 pfSense 5 Drive 0 F6 PXE Boot: 1 /boot/config: -h Consoles: serial port BIOS drive C: is disk0 BIOS drive D: is disk1 BIOS 620kB/2096000kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@pfsense-22-amd64-builder, Thu Jan 22 15:01:25 CST 2015) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x1213f88 data=0x8819b0+0x357620 syms=[0x8+0x16db38+0x8+0x16accb] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... KDB: debugger backends: ddb KDB: current backend: ddb ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) panic: running without device atpic requires a local APIC cpuid = 0 KDB: enter: panic [ thread pid 0 tid 0 ] Stopped at kdb_enter+0x3e: movq$0,kdb_why db The solution is here http://lists.soekris.com/pipermail/soekris-tech/2011-December/018026.html Are there any plans to it ? thanks, matheus ps: I tried to build pfSense myself to have this. A work not finished though :( Hi, I will take this as a no. Somewhere in future I will try to resume this project, and then I broadcast it here. a,, matheus -- We will call you cygnus, The God of balance you shall be A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? http://en.wikipedia.org/wiki/Posting_style ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold -- We will call you Cygnus, The God of balance you shall be A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? http://en.wikipedia.org/wiki/Posting_style ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold -- We will call you Cygnus, The God of balance you shall be A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? http://en.wikipedia.org/wiki/Posting_style ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] squidGuard Stopped
What do the logs say? On Jan 27, 2015 10:16 PM, A Mohan Rao mohanra...@gmail.com wrote: Hello, After i upgrade pfsense from 2.1.5 to 2.2-i386 squidGuard service is stopped i already uninstall then install with 5 times still its not started please give any idea. Also i m not get package squid3-dev on 2.2 Thanks mohan ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] user certs
On Sat, Jan 24, 2015 at 1:03 PM, Randy Bush ra...@psg.com wrote: 2.2-RELEASE (i386) the book does not cover user certs. [yes, i donated by payng for gold] and https://doc.pfsense.org/index.php/User_Manager is not very helpful. if i go to create user, it offers to create a user cert, by default off the openvpn client ca. but i live in a world which already has a cert universe, so i already have a user cert descending from the same ca which signed the https cert. once the user has been created, i can go back and edit user and this time it takes me to the cert paste page. but that lets me paste a cert but also demands teh key. the user should not have their key anywhere but on their very private machine. so color me confused on how to use a cert as a user credential. The cert, in that context, is intended for where you're managing the certs entirely within the built-in cert manager. Then it's used for OpenVPN Client Export from there, where it must have the key. I can't think of any current use of that functionality outside of that. If you're using user certs generated elsewhere, no need to import the certs into the user manager at all. There a requirement for that somewhere that I'm missing? ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] 2.2-RELEASE Via Padlock
On Sun, Jan 25, 2015 at 7:59 PM, Peder Rovelstad provels...@comcast.net wrote: Hello. Has Via Padlock Hardware Crypto support been disabled in pfSense/FreeBSD 10? No, should still be there. Whether anyone's continually testing the old drivers like that is unknown, that's one I haven't personally tested. You seeing it not work, or just curious? ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Release 2.2 - more problems than success by upgrades / looping packet installations / sshd is not working any more / crashes on X5550 CPU
On a plain vanilla Alix 3port board with 2.1.5 previously installed, my autoupdate installed Asterisk (my only package) with no problems. I have only lightly tested things though - perhaps problems will pop up. FWIW Bob G On 01/28/2015 03:41 AM, WolfSec-Support wrote: 2015-01-27 22:13 GMT+01:00 Chris Buechler c...@pfsense.com mailto:c...@pfsense.com: we have general problems with v2.2 I tried to update 13 devices, and only some worked fine (1 ALIX), and one virtual machine (afterwards crashes see below) Most we had problems, e.g: - looping packet installations without ending - reboot is not solving it In what circumstance? after launching the amd64 based pfsense to make an upgrade from 2.1.5 to v.2.2 via webgui, it installs the upgrade, and then reinstalls all packages this never ends also a reboot will not solve this / brake package installation loop Intel X5550 Issue under VMware ESXi 5.1 - crashes on ALL machines which run under VMware ESXi 5.1 on CPU: There has to be some difference between this and the other outside of the CPU. Some configuration difference, or something. What are you using on these that you aren't on the others? all use same packages and same plattform, and same sevices: packages: - squid - lightsquid - open-vm-tools - cron - autoconfigbackup other vm's with only: packages: - open-vm-tools - cron - autoconfigbackup have same issue I tested also on different hosts (3x same HP DL 380 G6 with same CPU's) same issue also I thried without any package: - crashes services used: - DNS Forwarder - OpenVPN - Firewall for sure ;) - HA - Limiters all worked fine under v2.1.5 The only crashing scenario I've found in release is limiters+HA as noted in the upgrade guide. https://doc.pfsense.org/index.php/Upgrade_Guide uh, may have ignored that fact - yes - limiters HA well, question: - disabling the limiters would solve this issue in meantime ? - or do I have to delete all limiters but: on other CPU under VMware ESX5.1 I have release 2.2 WITH HA AND limiters up and running without problems strange so, would help If you anser upper questions - I will do some test here Many thanks for the helpinng hint Best regards Stephan ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
