[LUTE] Re: Nylon string 2m
that's 0.52 carbon. shouldn't be a problem. RT On 4/1/2019 9:11 AM, Edward Martin wrote: You say a nylgut .62 is too thick. You have stated the length you want, but what size string are you asking? Sent from my iPhone On Apr 1, 2019, at 7:42 AM, Yuval Dvoran wrote: I know, but carbon will be too thin for this job... I'd love to use Nylgut, but 0,62 is too thick, and they don't produce it in 0,6 in 1,80m length. Am 01.04.2019 15:39 schrieb Roman Turovsky : you can get unlimited lenghts of Seaguar carbonfiber. RT On 4/1/2019 7:20 AM, Yuval Dvoran wrote: Hi folks, Any ideas, where I can get a nylon string of 1,80-2,00m length? I already asked Pyramid and Kürschner, both only have short ones. Savarez I'll contact in some minutes. And any experiments with line? All the best from sunny Germany! Yuval To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
[LUTE] Re: LuteScribe
Another route would be to set up a PC 'within' your Mac and run LuteScribe there. I have done this so I can use Fronimo on my Mac Pro. If you follow the Instructions in Bootcamp Assistant on your Mac, it is straightforward (assuming your Mac is reasonably new) to set up Windows 10 in a sub-section of your Hard Disk. Robin On 01/04/2019, 21:10, "Luke Emmet" wrote: Hi Leonard LuteScribe is a Windows application, but it has been confirmed to work with Wine on Linux, so the process with a Mac should be very similar. The sequence of steps for getting it to run on Linux are as follows: 1. Install Winetricks https://wiki.winehq.org/Winetricks 2. Install Wine Gecko (32-bit) 2.47 into Wine 3. Install .NET runtime into Wine - Microsoft .NET framework 4.6.00081 4. Finally install LuteScribe into Wine I think you have to do it in this order. I can personally confirm this worked on Linux, but I'm not a Linux expert so I'm not sure I'm best placed to help debug this process. I don't have personal experience in getting it to install on Mac, but I would expect a similar process should work, since Winetricks is available for Mac. Best Wishes - Luke On 27-Mar-2019 14:45, Leonard Williams wrote: > Does anyone have any experience with installing and running > LuteScribe on a Mac? I tried it using wine and wine bottler (no, I > wasn't drunk) but was unsure of configuration settings, so I gave up. > Any suggestions out there? > > Thanks and regards, > > Leonard Williams > > -- > > > To get on or off this list see list information at > http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html -- __ Orlando Lutes http://www.orlando-lutes.com
[LUTE] Re: LuteScribe
Hi Leonard LuteScribe is a Windows application, but it has been confirmed to work with Wine on Linux, so the process with a Mac should be very similar. The sequence of steps for getting it to run on Linux are as follows: 1. Install Winetricks https://wiki.winehq.org/Winetricks 2. Install Wine Gecko (32-bit) 2.47 into Wine 3. Install .NET runtime into Wine - Microsoft .NET framework 4.6.00081 4. Finally install LuteScribe into Wine I think you have to do it in this order. I can personally confirm this worked on Linux, but I'm not a Linux expert so I'm not sure I'm best placed to help debug this process. I don't have personal experience in getting it to install on Mac, but I would expect a similar process should work, since Winetricks is available for Mac. Best Wishes - Luke On 27-Mar-2019 14:45, Leonard Williams wrote: Does anyone have any experience with installing and running LuteScribe on a Mac? I tried it using wine and wine bottler (no, I wasn't drunk) but was unsure of configuration settings, so I gave up. Any suggestions out there? Thanks and regards, Leonard Williams -- To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html -- __ Orlando Lutes http://www.orlando-lutes.com
[LUTE] LLD
Hello Everybody, Can anybody give me any opinion(s) about lutes sold by Le Lute Dore? I've been off-list for some time now, so I may have missed some discussion on this topic already. I believe they're Chinese (?). I'm just curious to hear anybody's views on whether they're any good or not. Best to reply off-list to my personal e-mail: d_lu...@comcast.net mailto:d_lu...@comcast.net . Thanks David Rastall -- To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
[LUTE] Re: Nylon string 2m
You say a nylgut .62 is too thick. You have stated the length you want, but what size string are you asking? Sent from my iPhone > On Apr 1, 2019, at 7:42 AM, Yuval Dvoran wrote: > > I know, but carbon will be too thin for this job... I'd love to use Nylgut, > but 0,62 is too thick, and they don't produce it in 0,6 in 1,80m length. > Am 01.04.2019 15:39 schrieb Roman Turovsky : >> >> you can get unlimited lenghts of Seaguar carbonfiber. >> RT >> >>> On 4/1/2019 7:20 AM, Yuval Dvoran wrote: >>> Hi folks, >>> >>> Any ideas, where I can get a nylon string of 1,80-2,00m length? I >>> already asked Pyramid and Kürschner, both only have short ones. >>> Savarez >>> I'll contact in some minutes. >>> And any experiments with line? >>> >>> All the best from sunny Germany! >>> Yuval >>> >>> >>> To get on or off this list see list information at >>> http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html >> >> > >
[LUTE] Re: Nylon string 2m
I know, but carbon will be too thin for this job... I'd love to use Nylgut, but 0,62 is too thick, and they don't produce it in 0,6 in 1,80m length. Am 01.04.2019 15:39 schrieb Roman Turovsky : > > you can get unlimited lenghts of Seaguar carbonfiber. > RT > > On 4/1/2019 7:20 AM, Yuval Dvoran wrote: > > Hi folks, > > > > Any ideas, where I can get a nylon string of 1,80-2,00m length? I > > already asked Pyramid and Kürschner, both only have short ones. > >Savarez > > I'll contact in some minutes. > > And any experiments with line? > > > > All the best from sunny Germany! > > Yuval > > > > > > To get on or off this list see list information at > > http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html > >
[LUTE] Re: Nylon string 2m
you can get unlimited lenghts of Seaguar carbonfiber. RT On 4/1/2019 7:20 AM, Yuval Dvoran wrote: Hi folks, Any ideas, where I can get a nylon string of 1,80-2,00m length? I already asked Pyramid and Kürschner, both only have short ones. Savarez I'll contact in some minutes. And any experiments with line? All the best from sunny Germany! Yuval To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
[LUTE] Nylon string 2m
Hi folks, Any ideas, where I can get a nylon string of 1,80-2,00m length? I already asked Pyramid and Kürschner, both only have short ones. Savarez I'll contact in some minutes. And any experiments with line? All the best from sunny Germany! Yuval To get on or off this list see list information at http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
