setting graphics height to % of text height?
I'm using lyx-1.3.2, xforms.
I'm generating a page of thumbnail images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
Is there some way to do this?
Thanks,
Diab
--
Diab Jerius Harvard-Smithsonian Center for Astrophysics
60 Garden St, MS 70, Cambridge MA 02138 USA
[EMAIL PROTECTED] vox: 617 496 7575 fax: 617 495 7356
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Diab Jerius wrote:
I'm using lyx-1.3.2, xforms.
I'm generating a page of thumbnail images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
IIRC, just set the horizontal value to 0cm or something. Lyx uses the
largest value, if you have clicked keep proportions.
/Christian
--
Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
On 22 Aug, Christian Ridderström wrote:
On Fri, 22 Aug 2003, Diab Jerius wrote:
I'm using lyx-1.3.2, xforms.
I'm generating a page of thumbnail images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
IIRC, just set the horizontal value to 0cm or something. Lyx uses the
largest value, if you have clicked keep proportions.
/Christian
Hmm. no go. LyX still translates that to a textwidth
\includegraphics[%
bb=36bp 236bp 577bp 529bp,
clip,
height=0.2\textwidth,
keepaspectratio]{graphics/02+hrma_00.00:01.00.ps}
Re: setting graphics height to % of text height?
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
Juergen.
Re: setting graphics height to % of text height?
On 22 Aug, Juergen Spitzmueller wrote:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
Are you using lyx-qt? %theight isn't one of the choices I get in
the xforms version.
Diab
Re: setting graphics height to % of text height?
Juergen Spitzmueller schrieb:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
when this works, it is a bug. if not, also a bug ...
Herbert
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Diab Jerius wrote: Select width: 0 %theight height: 20 %theight Are you using lyx-qt? %theight isn't one of the choices I get in the xforms version. You're right.. there is no %theight in lyx 1.3.2-xforms... You should file a bug about this in bugzilla. /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Herbert Voß wrote:
Juergen Spitzmueller schrieb:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
when this works, it is a bug. if not, also a bug ...
I think the motivation for why it *should* work is that LyX will take the
larger value when keep aspect ratio is selected (which isn't very
obvious of course)
/Christian
--
Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
Thanks for the confirmation; the bug report is filed. On 22 Aug, Christian Ridderström wrote: On Fri, 22 Aug 2003, Diab Jerius wrote: Select width: 0 %theight height: 20 %theight Are you using lyx-qt? %theight isn't one of the choices I get in the xforms version. You're right.. there is no %theight in lyx 1.3.2-xforms... You should file a bug about this in bugzilla. Diab
Re: Output using arial font
On 2003-08-20, 02:50 GMT, Ben Nelson wrote: Let's assume that the audience is not typographically naive enough to distinguish the two. How would I go about exporting a postscript or PDF file that has arial embedded. You have to install version of dvips supporting type42 fonts, then convert arial font from TTF to Type42, generate .afm metrics, and then you can create PostScript with Arial. It is much more simple with pdflatex which supports TTF fonts natively -- read its manual. Matej -- Matej Cepl, GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC 138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
wierd crshes..
Hi all, I've recently re-installed lyx (after a PC crash, and massive loss of data (thank god for backups )). However, when i run it, I get the following output: -snip- checking for TeX fonts checking [for cmex10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmmi10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmr10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmsy10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for eufm10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for msam10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for msbm10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for wasy10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no removing lyxrc.defaults, which is identical to the system global version removing textclass.lst, which is identical to the system global version removing packages.lst, which is identical to the system global version removing doc/LaTeXConfig.lyx, which is identical to the system global version mv: cannot stat `xfonts/fonts.dir': No such file or directory mv: cannot stat `xfonts/fonts.dir.new': No such file or directory removing font links LyX: Done! lyx: SIGSEGV signal caught Sorry, you have found a bug in LyX. Please read the bug-reporting instructions in Help-Introduction and send us a bug report, if necessary. Thanks ! Bye. Aborted -/snip- Has anyone else come across this crash? Lyx *used* to work just fine, now I can't even geta GUI up. any ideas? Thanks, Thomi Richards
Re: wierd crshes..
checking [for cmex10]... /usr/local/share/lyx/configure: kpsewhich: command not found kpsewhich is part of the tex distribution right.. so you may want to check if the tex distribution was installed properly.. or maybe the path to kpsewhich isn't in your default path... the experts will be able to pinpoint the problem hopefully, but something to check out in the meanwhile.. nirmal
setting graphics height to % of text height?
I'm using lyx-1.3.2, xforms.
I'm generating a page of thumbnail images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
Is there some way to do this?
Thanks,
Diab
--
Diab Jerius Harvard-Smithsonian Center for Astrophysics
60 Garden St, MS 70, Cambridge MA 02138 USA
[EMAIL PROTECTED] vox: 617 496 7575 fax: 617 495 7356
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Diab Jerius wrote:
I'm using lyx-1.3.2, xforms.
I'm generating a page of thumbnail images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
IIRC, just set the horizontal value to 0cm or something. Lyx uses the
largest value, if you have clicked keep proportions.
/Christian
--
Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
On 22 Aug, Christian Ridderström wrote:
On Fri, 22 Aug 2003, Diab Jerius wrote:
I'm using lyx-1.3.2, xforms.
I'm generating a page of thumbnail images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
IIRC, just set the horizontal value to 0cm or something. Lyx uses the
largest value, if you have clicked keep proportions.
/Christian
Hmm. no go. LyX still translates that to a textwidth
\includegraphics[%
bb=36bp 236bp 577bp 529bp,
clip,
height=0.2\textwidth,
keepaspectratio]{graphics/02+hrma_00.00:01.00.ps}
Re: setting graphics height to % of text height?
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
Juergen.
Re: setting graphics height to % of text height?
On 22 Aug, Juergen Spitzmueller wrote:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
Are you using lyx-qt? %theight isn't one of the choices I get in
the xforms version.
Diab
Re: setting graphics height to % of text height?
Juergen Spitzmueller schrieb:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
when this works, it is a bug. if not, also a bug ...
Herbert
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Diab Jerius wrote: Select width: 0 %theight height: 20 %theight Are you using lyx-qt? %theight isn't one of the choices I get in the xforms version. You're right.. there is no %theight in lyx 1.3.2-xforms... You should file a bug about this in bugzilla. /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Herbert Voß wrote:
Juergen Spitzmueller schrieb:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
when this works, it is a bug. if not, also a bug ...
I think the motivation for why it *should* work is that LyX will take the
larger value when keep aspect ratio is selected (which isn't very
obvious of course)
/Christian
--
Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
Thanks for the confirmation; the bug report is filed. On 22 Aug, Christian Ridderström wrote: On Fri, 22 Aug 2003, Diab Jerius wrote: Select width: 0 %theight height: 20 %theight Are you using lyx-qt? %theight isn't one of the choices I get in the xforms version. You're right.. there is no %theight in lyx 1.3.2-xforms... You should file a bug about this in bugzilla. Diab
Re: Output using arial font
On 2003-08-20, 02:50 GMT, Ben Nelson wrote: Let's assume that the audience is not typographically naive enough to distinguish the two. How would I go about exporting a postscript or PDF file that has arial embedded. You have to install version of dvips supporting type42 fonts, then convert arial font from TTF to Type42, generate .afm metrics, and then you can create PostScript with Arial. It is much more simple with pdflatex which supports TTF fonts natively -- read its manual. Matej -- Matej Cepl, GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC 138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
wierd crshes..
Hi all, I've recently re-installed lyx (after a PC crash, and massive loss of data (thank god for backups )). However, when i run it, I get the following output: -snip- checking for TeX fonts checking [for cmex10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmmi10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmr10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmsy10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for eufm10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for msam10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for msbm10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for wasy10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no removing lyxrc.defaults, which is identical to the system global version removing textclass.lst, which is identical to the system global version removing packages.lst, which is identical to the system global version removing doc/LaTeXConfig.lyx, which is identical to the system global version mv: cannot stat `xfonts/fonts.dir': No such file or directory mv: cannot stat `xfonts/fonts.dir.new': No such file or directory removing font links LyX: Done! lyx: SIGSEGV signal caught Sorry, you have found a bug in LyX. Please read the bug-reporting instructions in Help-Introduction and send us a bug report, if necessary. Thanks ! Bye. Aborted -/snip- Has anyone else come across this crash? Lyx *used* to work just fine, now I can't even geta GUI up. any ideas? Thanks, Thomi Richards
Re: wierd crshes..
checking [for cmex10]... /usr/local/share/lyx/configure: kpsewhich: command not found kpsewhich is part of the tex distribution right.. so you may want to check if the tex distribution was installed properly.. or maybe the path to kpsewhich isn't in your default path... the experts will be able to pinpoint the problem hopefully, but something to check out in the meanwhile.. nirmal
setting graphics height to % of text height?
I'm using lyx-1.3.2, xforms.
I'm generating a page of "thumbnail" images and need to specify the
graphics height as a percentage of the text height. The width should
scale with the height, as it is not the constraining dimension.
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
In order to make the Height input box active, I select anything but
Scale% for the Width. I then select text% for Height, but it translates
that to textwidth, not textheight, in the output LaTeX.
Is there some way to do this?
Thanks,
Diab
--
Diab Jerius Harvard-Smithsonian Center for Astrophysics
60 Garden St, MS 70, Cambridge MA 02138 USA
[EMAIL PROTECTED] vox: 617 496 7575 fax: 617 495 7356
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Diab Jerius wrote:
> I'm using lyx-1.3.2, xforms.
>
> I'm generating a page of "thumbnail" images and need to specify the
> graphics height as a percentage of the text height. The width should
> scale with the height, as it is not the constraining dimension.
>
> What I'd like to get is the equivalent of
>
> \includegraphics[height=0.2\textheight]{foo.ps}
>
> I can't figure out how to do this.
>
> In order to make the Height input box active, I select anything but
> Scale% for the Width. I then select text% for Height, but it translates
> that to textwidth, not textheight, in the output LaTeX.
>
IIRC, just set the horizontal value to 0cm or something. Lyx uses the
largest value, if you have clicked keep proportions.
/Christian
--
Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
On 22 Aug, Christian Ridderström wrote:
> On Fri, 22 Aug 2003, Diab Jerius wrote:
>
>> I'm using lyx-1.3.2, xforms.
>>
>> I'm generating a page of "thumbnail" images and need to specify the
>> graphics height as a percentage of the text height. The width should
>> scale with the height, as it is not the constraining dimension.
>>
>> What I'd like to get is the equivalent of
>>
>> \includegraphics[height=0.2\textheight]{foo.ps}
>>
>> I can't figure out how to do this.
>>
>> In order to make the Height input box active, I select anything but
>> Scale% for the Width. I then select text% for Height, but it translates
>> that to textwidth, not textheight, in the output LaTeX.
>>
>
> IIRC, just set the horizontal value to 0cm or something. Lyx uses the
> largest value, if you have clicked keep proportions.
>
> /Christian
>
Hmm. no go. LyX still translates that to a textwidth
\includegraphics[%
bb=36bp 236bp 577bp 529bp,
clip,
height=0.2\textwidth,
keepaspectratio]{graphics/02+hrma_00.00:01.00.ps}&
Re: setting graphics height to % of text height?
Diab Jerius wrote:
> What I'd like to get is the equivalent of
>
> \includegraphics[height=0.2\textheight]{foo.ps}
>
> I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
Juergen.
Re: setting graphics height to % of text height?
On 22 Aug, Juergen Spitzmueller wrote:
> Diab Jerius wrote:
>> What I'd like to get is the equivalent of
>>
>> \includegraphics[height=0.2\textheight]{foo.ps}
>>
>> I can't figure out how to do this.
>
> Select
> width: 0 %theight
> height: 20 %theight
>
Are you using lyx-qt? %theight isn't one of the choices I get in
the xforms version.
Diab
Re: setting graphics height to % of text height?
Juergen Spitzmueller schrieb:
Diab Jerius wrote:
What I'd like to get is the equivalent of
\includegraphics[height=0.2\textheight]{foo.ps}
I can't figure out how to do this.
Select
width: 0 %theight
height: 20 %theight
when this works, it is a bug. if not, also a bug ...
Herbert
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Diab Jerius wrote: > > > Select > > width: 0 %theight > > height: 20 %theight > > > > Are you using lyx-qt? %theight isn't one of the choices I get in > the xforms version. > You're right.. there is no %theight in lyx 1.3.2-xforms... You should file a bug about this in bugzilla. /Christian -- Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
On Fri, 22 Aug 2003, Herbert Voß wrote:
> Juergen Spitzmueller schrieb:
> > Diab Jerius wrote:
> >
> >>What I'd like to get is the equivalent of
> >>
> >>\includegraphics[height=0.2\textheight]{foo.ps}
> >>
> >>I can't figure out how to do this.
> >
> >
> > Select
> > width: 0 %theight
> > height: 20 %theight
>
> when this works, it is a bug. if not, also a bug ...
>
I think the motivation for why it *should* work is that LyX will take the
larger value when "keep aspect ratio" is selected (which isn't very
obvious of course)
/Christian
--
Christian Ridderström http://www.md.kth.se/~chr
Re: setting graphics height to % of text height?
Thanks for the confirmation; the bug report is filed. On 22 Aug, Christian Ridderström wrote: > On Fri, 22 Aug 2003, Diab Jerius wrote: > >> >> > Select >> > width: 0 %theight >> > height: 20 %theight >> > >> >> Are you using lyx-qt? %theight isn't one of the choices I get in >> the xforms version. >> > You're right.. there is no %theight in lyx 1.3.2-xforms... You should file > a bug about this in bugzilla. > Diab
Re: Output using arial font
On 2003-08-20, 02:50 GMT, Ben Nelson wrote: > Let's assume that the audience is not typographically naive enough to > distinguish the two. How would I go about exporting a postscript or PDF > file that has arial embedded. You have to install version of dvips supporting type42 fonts, then convert arial font from TTF to Type42, generate .afm metrics, and then you can create PostScript with Arial. It is much more simple with pdflatex which supports TTF fonts natively -- read its manual. Matej -- Matej Cepl, GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC 138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
wierd crshes..
Hi all, I've recently re-installed lyx (after a PC crash, and massive loss of data (thank god for backups )). However, when i run it, I get the following output: -- checking for TeX fonts checking [for cmex10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmmi10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmr10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for cmsy10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for eufm10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for msam10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for msbm10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no checking [for wasy10]... /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found /usr/local/share/lyx/configure: kpsewhich: command not found no removing lyxrc.defaults, which is identical to the system global version removing textclass.lst, which is identical to the system global version removing packages.lst, which is identical to the system global version removing doc/LaTeXConfig.lyx, which is identical to the system global version mv: cannot stat `xfonts/fonts.dir': No such file or directory mv: cannot stat `xfonts/fonts.dir.new': No such file or directory removing font links LyX: Done! lyx: SIGSEGV signal caught Sorry, you have found a bug in LyX. Please read the bug-reporting instructions in Help->Introduction and send us a bug report, if necessary. Thanks ! Bye. Aborted -- Has anyone else come across this crash? Lyx *used* to work just fine, now I can't even geta GUI up. any ideas? Thanks, Thomi Richards
Re: wierd crshes..
> checking [for cmex10]... /usr/local/share/lyx/configure: kpsewhich: > command not found kpsewhich is part of the tex distribution right.. so you may want to check if the tex distribution was installed properly.. or maybe the path to kpsewhich isn't in your default path... the experts will be able to pinpoint the problem hopefully, but something to check out in the meanwhile.. nirmal
