Re: SVGs with alpha channel transparency

[Jean-Pierre Chretien]

>>Date: Wed, 21 Jun 2006 17:56:40 +0200 (MEST)
>>From: Jean-Pierre Chretien <[EMAIL PROTECTED]>
>>Subject: Re: SVGs with alpha channel transparency
>>To: lyx-users@lists.lyx.org
>>
>>
Date: Wed, 21 Jun 2006 09:57:10 +1000
From: John Pye <[EMAIL PROTECTED]>
To: Jean-Pierre Chretien <[EMAIL PROTECTED]>
CC: lyx-users@lists.lyx.org
Subject: Re: SVGs with alpha channel transparency

Hi Jean-Pierre,
[...]
>>A side conclusion of this thread (which was about svg export in general, not 
>>specific to transparency),
>>it came out that inkscape export could only provide transparency with bitmap 
>>output (png). 
>>
>>Uwe pointed out that a recent version of inkscape provides a transparent pdf 
>>output.

Another pointer, borrowed from the TexLive mailing list:
http://www.inf.bme.hu/~pts/sam2p/

I read there that 
"sam2p can create EPS and PDF images with transparency"
Alas, sam2p starts from bitmaps, not from vector graphics...

-- 
Jean-Pierre

How do you "un-grey" greyed out text?

[Tim Hume]

Hi,

I have recently started using LyX, (after using LaTeX for many years). One 
feature I really like is being able to add notes and greyed out text. 
However, I do not seem to be able to un-grey text which I have previously 
greyed out. At present I am cutting greyed out text and pasting it back as 
un-greyed out text, but this is clumsy. I'm sure there is a more elegant 
solution which I have just been unable to find.


Thanks for any help,

Tim Hume.

Re: Windows XP: Aspell for Opera and Lyx conflict

[Stephen Harris]

David Finlayson wrote:

Maybe some of you use Opera browser as well as Lyx on Windows XP?

I can't seem to get Opera to find the custom Aspell 0.6 built for Lyx,
and I can't get Lyx to work with Aspell 0.5 which Opera can use
(installed in C:\Aspell in both cases). Finally, it doesn't seem like
you can have both Aspell versions installed because Opera uses
c:\Aspell no matter where an alternate version is placed. Grrr.

Is it really true that I can only have spell checking in my email
client or my word processor but not both at the same time?



Joost has fixed it so Aspell can be installed where you want it.
Probably available in the next LyX release. You can have two
versions of Aspell installed for LyX, so I don't see why it
wouldn't work for LyX and Opera. The traditional 0.5 should work
with Opera or LyX1.3.7 -- and 0.6 should work with LyX1.4.1 --
they share the same parent folder, C:\Aspell but are installed
in different folders after that with different dictionaries.
They don't conflict for the two LyX versions. I don't have
Opera, but a full path specified to the 0.53 Aspell should work.

Regards,
Stephen

Windows XP: Aspell for Opera and Lyx conflict

[David Finlayson]

Maybe some of you use Opera browser as well as Lyx on Windows XP?

I can't seem to get Opera to find the custom Aspell 0.6 built for Lyx,
and I can't get Lyx to work with Aspell 0.5 which Opera can use
(installed in C:\Aspell in both cases). Finally, it doesn't seem like
you can have both Aspell versions installed because Opera uses
c:\Aspell no matter where an alternate version is placed. Grrr.

Is it really true that I can only have spell checking in my email
client or my word processor but not both at the same time?

I know there are issues with Aspell on Windows (I searched the mailing
list) but this is ridiculous. Why is Windows Lyx using a custom Aspell
version in the first place and even if this was a good idea, why is
the custom Aspell clobbering other programs which want the stable
version of Aspell?

--
David Finlayson

Re: Turning a LyX environment into a LaTeX command

[David Neeley]

The latest version of this guide, dated February 2006, is at
http://www.tug.org/tex-archive/macros/latex/doc/clsguide.pdf

David

On 6/15/06, Rich Shepard <[EMAIL PROTECTED]> wrote:

On Thu, 15 Jun 2006, [EMAIL PROTECTED] wrote:

> PS. Steve, let me know if you need or would like help.

   There is a document available as a .pdf file that might be helpful. It's
called "LaTeX2e for class and package writers." The date is 12 March 1998.

   I no longer have the digital file because I printed it.

Rich

Re: Inserting a tab indented outline into a lyx document

[Paul A. Rubin]

Paul Johnson wrote:

Seems easier to just use the itemize environment with customized
bullet symbols.  if you use the Document/Settings/Bullets options, you
can eliminate the symbols and then the output looks exactly the way
you want.


I thought about that, but what if you also want bullet lists (with 
normal bullets) in the same document?



It would drive me nuts to keep turning the stevelist special
environment on and off.


Since I'm already nuts, this was not a concern for me.  :-)

/Paul

Re: Inserting a tab indented outline into a lyx document

[Paul Johnson]

Seems easier to just use the itemize environment with customized
bullet symbols.  if you use the Document/Settings/Bullets options, you
can eliminate the symbols and then the output looks exactly the way
you want.

It would drive me nuts to keep turning the stevelist special
environment on and off.

pj

On 6/19/06, Paul A. Rubin <[EMAIL PROTECTED]> wrote:

Steve Litt wrote:

>
> That works perfectly, and I could make a LyX environment to eliminate the ERT.
> As it turned out, I just used the itemize environment for this particular
> application, but your example showed me how to directly translate my tab
> indented outline into LyX with a simple Ruby script.
>

You might also have a look at the algorithmicx LaTeX package, which I
think allows you to customize some of the commands.

/Paul





--
Paul E. Johnson
Professor, Political Science
1541 Lilac Lane, Room 504
University of Kansas

Re: lyx 1.4.1 installation on Suse 10.1

[Georg Baum]

Holger Schmidt wrote:

> Of course it would be possible to give the command "make install" but I
> prefere it to make before a RPM-Package. For me and after than for all
> other users if they want.

make rpmdist

after the usual configure command is better.

> What can be the reason for the failed to build the package?

That has something to do with checkinstall, not with LyX. Obviously it
expects a spec file that does not exist.

>> > Ok maybey there is the problem. I have diverent packages / vision's
>> > qt3-3.3.5-58.3 and qt3-devel-3.3.5-58. Are this the reason of my
>> > problem's?
>>
>> Probably not, but you should do an online update to get all packages in
>> sync.
> 
> I am up to date.

It is hard to believe. It would be very strange if the devel package had a
different version number than the lib package.


Georg

Re: [Patch] GUI cleanup step 2

[Georg Baum]

Abdelrazak Younes wrote:

> Hello,
> 
> Here is the next step on my GUI API cleanup. Only qt4 for now.

wrong list?


Georg

Re: [Patch] GUI cleanup step 2

[Abdelrazak Younes]

Oups sorry, wrong list.

Abdel.

[Patch] GUI cleanup step 2

[Abdelrazak Younes]

Hello,

Here is the next step on my GUI API cleanup. Only qt4 for now.

Committed to the "younes" branch. Comments welcome.

Abdel.

Log:
* BufferView::BufferView(LyXView * owner, lyx::frontend::WorkArea * 
workArea)

  - now need a valid WorkArea on construction
  - but no more need for width and height

* BufferView_pimpl::BufferView_pimpl:
 - as above plus WorkArea creation is not done there anymore.
   The goal is to void the need for this WorkArea pointer.
   WorkArea shall use the BufferView and not the other way around.

* LyXView:
  - buffer_view_ is now a simple (BufferView *) that can be set via the 
setBufferView() method.

This buffer_view_ member should go eventually.
  - new "Gui & owner_" member set on construction.

* qt4/GuiView:
  - implememted above LyXView changes.
  - GuiView::init() new method overloaded from LyXView::init()

* controllers/Kernel.C: adapted to LyXView changes.
* importer.C: ditto
* lyx_main.[Ch]: ditto
* lyxfunc.C: ditto

* Action.C: added frontends/ path to #include

* Application.h:
  - font_loader_: new FontLoader member that replace the global one.
  - gui_ : new GuiImplementation member that replace the instance in 
GuiView


* qt4/FontLoader.h: removed the global variable.
* qt4/qfont_metrics.C: adapted to FontLoader and Application Change
* qt4/QLPainter.C: ditto

* frontends/Gui :
  - 3 new pure virtual methods that handle the LyXView creation/deletion
and reference.
  - buffer_views_ : contains the needed  BufferViews

* qt4/GuiImplementation:
  - now manage also GuiView and BufferView creations. For now a new
BufferView is created at the same time as a WorkArea but this might
change in the feature.

* frontends/WorkArea:
  - WorkArea::WorkArea() now only need a BufferView (no more LyXView)
  - BufferView * buffer_view_: new member.

* frontends/qt4/GuiWorkArea: implemented the above changes.

* qt4/lyx_gui.C :
  - a new LyXView and a new WorkArea are created there using theApp->Gui()
  - use theApp->fontLoader()

* lyx_main.h: now needs a simple (LyXView *).

Index: BufferView.C
===
--- BufferView.C(revision 14165)
+++ BufferView.C(working copy)
@@ -48,6 +48,7 @@
 #include "insets/insetcommand.h" // ChangeRefs
 #include "insets/insettext.h"
 
+
 using lyx::support::bformat;
 
 using lyx::cap::setSelectionRange;
@@ -61,8 +62,8 @@
 extern BufferList bufferlist;
 
 
-BufferView::BufferView(LyXView * owner, int width, int height)
-   : pimpl_(new Pimpl(*this, owner, width, height))
+BufferView::BufferView(LyXView * owner, lyx::frontend::WorkArea * workArea)
+   : pimpl_(new Pimpl(*this, owner, workArea))
 {}
 
 
Index: BufferView.h
===
--- BufferView.h(revision 14165)
+++ BufferView.h(working copy)
@@ -38,6 +38,7 @@
 namespace lyx {
 namespace frontend {
 class Painter;
+class WorkArea;
 }
 }
 
@@ -76,7 +77,7 @@
 * Create a view with the given owner main window,
 * of the given dimensions.
 */
-   BufferView(LyXView * owner, int w, int h);
+   BufferView(LyXView * owner, lyx::frontend::WorkArea * workArea);
 
~BufferView();
 
@@ -186,10 +187,10 @@
 
///
void workAreaResize();
+   
+   /// Receive a keypress
+   void workAreaKeyPress(LyXKeySymPtr key, key_modifier::state state);
 
-/// Receive a keypress
-void workAreaKeyPress(LyXKeySymPtr key, key_modifier::state state);
-
/// a function should be executed from the workarea
bool workAreaDispatch(FuncRequest const & ev);
 
Index: BufferView_pimpl.C
===
--- BufferView_pimpl.C  (revision 14165)
+++ BufferView_pimpl.C  (working copy)
@@ -137,23 +137,19 @@
 } // anon namespace
 
 
-BufferView::Pimpl::Pimpl(BufferView & bv, LyXView * owner,
-int width, int height)
-   : bv_(&bv), owner_(owner), buffer_(0), wh_(0), cursor_timeout(400),
+BufferView::Pimpl::Pimpl(BufferView & bv, LyXView * owner, WorkArea * workArea)
+   : bv_(&bv), owner_(owner), workArea_(workArea), buffer_(0), wh_(0), 
cursor_timeout(400),
  using_xterm_cursor(false), cursor_(bv),
  anchor_ref_(0), offset_ref_(0)
 {
xsel_cache_.set = false;
 
-   workAreaId_ = owner_->gui().newWorkArea(width, height);
-   workArea_ = & owner_->gui().workArea(workAreaId_);
-
// Setup the signals
timecon = cursor_timeout.timeout
.connect(boost::bind(&BufferView::Pimpl::cursorToggle, this));
-   
+
cursor_timeout.start();
-
+   
saved_positions.resize(saved_positions_num);
// load saved bookmarks
lyx::Session::BookmarkList & bmList = 
LyX::ref().session().loadBookmarks();
@@ -583,7 +579,7 @@
 // scrollDocView(new_top_y);
 //
 // // Update the scrollbar.
-// workArea_->.setScr

Re: SVGs with alpha channel transparency

[Jean-Pierre Chretien]

>>Date: Wed, 21 Jun 2006 09:57:10 +1000
>>From: John Pye <[EMAIL PROTECTED]>
>>To: Jean-Pierre Chretien <[EMAIL PROTECTED]>
>>CC: lyx-users@lists.lyx.org
>>Subject: Re: SVGs with alpha channel transparency
>>
>>Hi Jean-Pierre,
>>
>>>
>>>   Re: Lyx 1.4.0pre3 + SVG + pdflatex
>>>
>>> Georg Baum
>>> Tue, 31 Jan 2006 00:56:43 -0800
>>>
>>> Alfonso Gazo wrote:
>>>
>>> > After, when generating the PDF file, it produces a messy graphic just in
>>> > the place the SVG graphic should be. I've found that LyX is somewhat
>>> > converting from SVG to EPS and then to PNG. Finally, PNG image is
>>> > included in PDF file.
>>>
>>> Correct. This is unfortunately hardcoded in LyX.
>>
>>Is that still true? I take it to mean that I can't bypass LyX's use of 
>>'convert' in converting my SVG first to a PNG?

Ahum, Georg wrote that, I'm sorry I pointed out the wrong message in the thread.
A side conclusion of this thread (which was about svg export in general, not 
specific to transparency),
it came out that inkscape export could only provide transparency with bitmap 
output (png). 

Uwe pointed out that a recent version of inkscape provides a transparent pdf 
output.

Regards

-- 
Jean-Pierre

Re: lyx 1.4.1 installation on Suse 10.1

[Holger Schmidt]

Am Mittwoch, 21. Juni 2006 16:15 schrieb Georg Baum:
> Holger Schmidt wrote:
> > After this command:
> >
> > "./configure --with-frontend=qt --with-qt-dir=/usr/lib/qt3"
> >
> > was until now everything ok. After my next command:
> >
> > "make" I get all the time the following error-message:
> >
> > ../../boost/boost/config/compiler/gcc.hpp:92:7: warning: #warning
> > "Unknown compiler version - please run the configure tests and report the
> > results"
>
> That is no error, but a warning, and is harmless.
>
> > Inside the log file stay:
> > "error: failed to stat /home/username/daten/software/lyx/suse
> > 10.1/lyx-1.4.1/lyx-1.4.1.spec: Datei oder Verzeichnis nicht gefunden
> > Building target platforms: i386
> > Building for target i386
>
> What exactly did you do? A simple 'make' should not need this file.

I use "checkinstall" from the DVD Suse 10.1

I get this messages:
"Building file list...OK
/usr/sbin/checkinstall: line 1711: [: /home/xhosch/daten/software/lyx/suse: 
binary operator expected
/usr/sbin/checkinstall: line 1779: cd: /home/xhosch/daten/software/lyx/suse: 
Datei oder Verzeichnis nicht gefunden
cat: description-pak: Datei oder Verzeichnis nicht gefunden

Building RPM package... FAILED!

*** Failed to build the package

Do you want to see the log file?  [y]:"

This is the reason for the log file.

OK ! The first step with the command:
"./configure --with-frontend=qt --with-qt-dir=/usr/lib/qt3"
and the second step with the command:
"make"
runs now without problems and without any warning and error-messages :)

Of course it would be possible to give the command "make install" but I 
prefere it to make before a RPM-Package. For me and after than for all other 
users if they want.

What can be the reason for the failed to build the package?

> > Ok maybey there is the problem. I have diverent packages / vision's
> > qt3-3.3.5-58.3 and qt3-devel-3.3.5-58. Are this the reason of my
> > problem's?
>
> Probably not, but you should do an online update to get all packages in
> sync.

I am up to date.

Thank's
Holger

Re: lyx 1.4.1 installation on Suse 10.1

[Georg Baum]

Holger Schmidt wrote:

> After this command:
> 
> "./configure --with-frontend=qt --with-qt-dir=/usr/lib/qt3"
> 
> was until now everything ok. After my next command:
> 
> "make" I get all the time the following error-message:
> 
> ../../boost/boost/config/compiler/gcc.hpp:92:7: warning: #warning "Unknown
> compiler version - please run the configure tests and report the results"

That is no error, but a warning, and is harmless.

> Inside the log file stay:
> "error: failed to stat /home/username/daten/software/lyx/suse
> 10.1/lyx-1.4.1/lyx-1.4.1.spec: Datei oder Verzeichnis nicht gefunden
> Building target platforms: i386
> Building for target i386

What exactly did you do? A simple 'make' should not need this file.

> Ok maybey there is the problem. I have diverent packages / vision's
> qt3-3.3.5-58.3 and qt3-devel-3.3.5-58. Are this the reason of my
> problem's?

Probably not, but you should do an online update to get all packages in
sync.


Georg

Re: Tutorial in french about Lyx on Mac OSX

[Bennett Helm]

On Jun 21, 2006, at 4:37 AM, Isaac Pante wrote:


Hello everybody!

I made a tutorial in french which describes step-by-step how to  
localize Lyx in french on Mac OS X (change the GUI interface and  
install the right spellchecker).

Is there a way to publish it on lyx.org or anywhere else?

You can see the tutorial at this adress (http://isaacpante.net/ 
LocaliserLyxMacOSX.pdf).


It looks very nice!

I've taken the liberty of putting it up on the wiki. It's linked off  
the LyXOnMac page, found here:


.

Thanks!

Bennett

Re: lyx 1.4.1 installation on Suse 10.1

[Holger Schmidt]

Am Mittwoch, 21. Juni 2006 13:20 schrieb Georg Baum:
> Holger Schmidt wrote:
> > I tryed this with following commands:
> > [CODE]NB07:/home/username/daten/software/lyx/suse 10.1/lyx-1.4.1 #
> > [./configure
> > --with-frontend=qt --with-qt-dir=/usr/share/qt3[/CODE]
> >
> > [CODE]NB07:/home/username/daten/software/lyx/suse 10.1/lyx-1.4.1
> > [#./configure
> > --with-frontend=qt --with-qt-dir=/usr/share/qt[/CODE]
> >
> > Where are my qt library?
>
> Probably in /usr/lib/qt3

Thath was the straight tip

After this command:

"./configure --with-frontend=qt --with-qt-dir=/usr/lib/qt3"  

was until now everything ok. After my next command:

"make" I get all the time the following error-message:

../../boost/boost/config/compiler/gcc.hpp:92:7: warning: #warning "Unknown 
compiler version - please run the configure tests and report the results"

Inside the log file stay:
"error: failed to stat /home/username/daten/software/lyx/suse 
10.1/lyx-1.4.1/lyx-1.4.1.spec: Datei oder Verzeichnis nicht gefunden
Building target platforms: i386
Building for target i386

>
> > How can I see the vision from my qt and qt-develpackage's?
>
> rpm -q 

IAfter the following commands:

"rpm -q qt3" I get this information:  qt3-3.3.5-58.3
"rpm -q qt3-devel I get this information: qt3-devel-3.3.5-58
"rpm -q qt" Iget this information: qt-4.1.0-29
"rpm -q qt-devel" Iget this information: qt-devel-4.1.0-29

> > In the file INSTALL it is to read:
> > 0) Linux users beware: if compiling the Qt frontend, you need qt and
> > qt-devel packages of the same version to compile LyX.

Ok maybey there is the problem. I have diverent packages / vision's 
qt3-3.3.5-58.3 and qt3-devel-3.3.5-58. Are this the reason of my problem's?

Thank's

Holger

Re: lyx 1.4.1 installation on Suse 10.1

[Georg Baum]

Holger Schmidt wrote:

> I tryed this with following commands:
> [CODE]NB07:/home/username/daten/software/lyx/suse 10.1/lyx-1.4.1 #
> [./configure
> --with-frontend=qt --with-qt-dir=/usr/share/qt3[/CODE]
> 
> [CODE]NB07:/home/username/daten/software/lyx/suse 10.1/lyx-1.4.1
> [#./configure
> --with-frontend=qt --with-qt-dir=/usr/share/qt[/CODE]
> 
> Where are my qt library?

Probably in /usr/lib/qt3

> How can I see the vision from my qt and qt-develpackage's?

rpm -q 

I don't know the new package tool of qt yet.

> In the file INSTALL it is to read:
> 0) Linux users beware: if compiling the Qt frontend, you need qt and
> qt-devel packages of the same version to compile LyX.

They are probably called qt3 and qt3-devel on SuSE 10.1


Georg

lyx 1.4.1 installation on Suse 10.1

[Holger Schmidt]

Hi,

my problem is to install lyx 1.4.1 on Suse Linux 10.1

I get the following message:
[code] The following problems have been detected by configure.
 Please check the messages below before running 'make'.
 (see the section 'Problems' in the INSTALL file)

** qt library not found ![/code]

(A directory with name "qt3" in my Suse 10.1-installation is not exist. 
only /usr/share/qt.)

I tryed this with following commands:
[CODE]NB07:/home/username/daten/software/lyx/suse 10.1/lyx-1.4.1 # ./configure 
--with-frontend=qt --with-qt-dir=/usr/share/qt3[/CODE]

[CODE]NB07:/home/username/daten/software/lyx/suse 10.1/lyx-1.4.1 #./configure 
--with-frontend=qt --with-qt-dir=/usr/share/qt[/CODE]

Where are my qt library?

How can I see the vision from my qt and qt-develpackage's?

In the file INSTALL it is to read:
0) Linux users beware: if compiling the Qt frontend, you need qt and qt-devel 
packages of the same version to compile LyX.


Thanks
xhosch

 

Re: SVGs with alpha channel transparency

[Georg Baum]

Jose' Matos wrote:

> On Wednesday 21 June 2006 09:16, Georg Baum wrote:
>> The workaround to get svg->pdf conversion is to create an external
>> template (IIRC more detailed instructions are in the list archive).
> 
>   Georg I think that here you mean an external inset or am I wrong?

Yes and no: First you need yo create a template , then you can use it in an
external inset. I attach a template that I created some time ago. It might
or might not work, I forgot.


GeorgTemplate VectorGraphics
# By default, InsetExternal is displayed as a grey button
# containing this text.
GuiName "Vector: $$AbsOrRelPathParent$$Basename"
# This text is used in the External dialog.
# Provide enough information to explain to the user just
# what the template can provide him with.
HelpText
A vector drawing.
HelpTextEnd
# ANY file type can be displayed as a RasterImage.
# Specifically, LyX will attempt to interrogate the file itself
# in order to deduce its format.
InputFormat "*"
# Globbing pattern used when browsing for a Raster image file.
FileFilter "*.{pdf,eps,fig,obj,tgo,svg}"
# Set to "true" if the file represented by the template
# must be generated by LyX.
AutomaticProduction true
# LyX has hard-coded support for these transformations
Transform Rotate
Transform Resize
Transform Clip
Transform Extra
Format LaTeX
TransformOption Rotate RotationLatexOption
TransformOption Resize ResizeLatexOption
TransformOption Clip   ClipLatexOption
TransformOption Extra  ExtraOption
Option Arg "[$$Extra,$$Rotate,$$Resize,$$Clip]"
# This string is what is output to the LaTeX file.
Product "\\includegraphics$$Arg{$$AbsOrRelPathMaster$$Basename}"
UpdateFormat eps
UpdateResult "$$AbsPath$$Basename.eps"
Requirement "graphicx"
ReferencedFile latex "$$AbsPath$$Basename.eps"
ReferencedFile dvi   "$$AbsPath$$Basename.eps"
FormatEnd
Format PDFLaTeX
TransformCommand Rotate RotationLatexCommand
TransformCommand Resize ResizeLatexCommand
# FIXME: use native pdfximage resizing
# FIXME: support Clip
# FIXME: support Extra
Product 
"$$RotateFront$$ResizeFront\\pdfximage{$$AbsOrRelPathMaster$$Basename.pdf}$$ResizeBack$$RotateBack"
UpdateFormat pdf
UpdateResult "$$AbsPath$$Basename.pdf"
Requirement "graphicx"
ReferencedFile latex "$$AbsPath$$Basename.pdf"
FormatEnd
Format Ascii
Product "$$Contents(\"$$AbsPath$$Basename.asc\")"
UpdateFormat asciiimage
UpdateResult "$$AbsPath$$Basename.asc"
FormatEnd
Format DocBook
Product ""
UpdateFormat eps
UpdateResult "$$AbsPath$$Basename.eps"
ReferencedFile docbook "$$AbsPath$$Basename.eps"
ReferencedFile docbook-xml "$$AbsPath$$Basename.eps"
FormatEnd
Format LinuxDoc
Product "[VectorGraphic: $$FName]"
FormatEnd
TemplateEnd

Tutorial in french about Lyx on Mac OSX

[Isaac Pante]

Hello everybody!

I made a tutorial in french which describes step-by-step how to  
localize Lyx in french on Mac OS X (change the GUI interface and  
install the right spellchecker).

Is there a way to publish it on lyx.org or anywhere else?

You can see the tutorial at this adress (http://isaacpante.net/ 
LocaliserLyxMacOSX.pdf).


Isaac Pante

Re: SVGs with alpha channel transparency

[Jose' Matos]

On Wednesday 21 June 2006 09:16, Georg Baum wrote:
> The workaround to get svg->pdf conversion is to create an external template
> (IIRC more detailed instructions are in the list archive).

  Georg I think that here you mean an external inset or am I wrong?

> Georg

-- 
José Abílio

Re: SVGs with alpha channel transparency

[Georg Baum]

John Pye wrote:

> Hi Jean-Pierre,
> 
>>
>>   Re: Lyx 1.4.0pre3 + SVG + pdflatex
>>
>> Georg Baum
>> Tue, 31 Jan 2006 00:56:43 -0800
>>
>> Alfonso Gazo wrote:
>>
>> > After, when generating the PDF file, it produces a messy graphic just
>> > in the place the SVG graphic should be. I've found that LyX is somewhat
>> > converting from SVG to EPS and then to PNG. Finally, PNG image is
>> > included in PDF file.
>>
>> Correct. This is unfortunately hardcoded in LyX.
> 
> Is that still true?

Yes.

> I take it to mean that I can't bypass LyX's use of 
> 'convert' in converting my SVG first to a PNG?

No, you misunderstood. You can configure any converter you like for svg->png
conversion. You can currently not change the target format png: For
pdflatex export included graphics are always converted to png if they
cannot be used directly.
The workaround to get svg->pdf conversion is to create an external template
(IIRC more detailed instructions are in the list archive).


Georg

Links partnership request to http://www.mybookmarks.com

[Daniel Bennet]

Hello, 
My name is Daniel Bennet, and I want to propose you triangle (three way 
linking) link exchange.
I can place your link on the following sites:
http://www.casino-tribune.com  (PR=6)   or 
http://slotsgame4u.com/  (PR=6) or
http://www.videopoker4u.com/  (PR=5) or
http://www.roulette4u.com/  (PR=5) or
http://www.craps4u.com/  (PR=5) or
http://www.baccarat-game.org/  (PR=5) or
http://online-casino.auto.pl  (PR=6)
http://online-casino.freewebtools.com  (PR=5)
http://online-casino.webpark.pl  (PR=5)
http://games.az.pl  (PR=6)

Page where you place our link must meet next requirements:

1. Page Rank of the page is not less than Page Rank of our Page - 1 
2. Your page is not the page in site link directory 
3. If your page has less PR than PR of our page, then you page must be home 
page. Or else our page is not casino thematic. 
4. Your page must be casino thematic. 
5. Your page must contain not more than 15 outbound links. 
Here http://www.casino-focus.com/site_linking.php you can acquaint with 
deatiled information about my proposal.

Here is my linking info (choose one, that meets your site casino thematic most 
closer):
http://www.casino-focus.com/"; alt="Online Casino">Online Casino
http://www.casino-focus.com/"; alt="Online Casino Focus">Online Casino 
Focus
http://www.casino-focus.com/poker.html"; alt="Poker">Poker
http://www.casino-focus.com/poker.html"; alt="Poker at Online Casino 
Focus">Poker at Online Casino Focus
http://www.casino-focus.com/blackjack.html"; 
alt="BlackJack">BlackJack
http://www.casino-focus.com/blackjack.html"; alt="BlackJack at Online 
Casino Focus">BlackJack at Online Casino Focus
http://www.casino-focus.com/roulette.html"; alt="Roulette">Roulette
http://www.casino-focus.com/roulette.html"; alt="Roulette at Online 
Casino Focus">Roulette at Online Casino Focus
http://www.casino-focus.com/online_casinos.html"; alt="Online 
Casinos">Online Casinos
http://www.casino-focus.com/online_casinos.html"; alt="Online Casinos 
at Online Casino Focus">Online Casinos at Online Casino Focus
http://www.casino-focus.com/slots.html"; alt="Slots">Slots
http://www.casino-focus.com/slots.html"; alt="Slots at Online Casino 
Focus">Slots at Online Casino Focus
http://www.casino-focus.com/bingo.html"; alt="Bingo">Bingo
http://www.casino-focus.com/bingo.html"; alt="Bingo at Online Casino 
Focus">Bingo at Online Casino Focus
http://www.casino-focus.com/keno.html"; alt="Keno">Keno
http://www.casino-focus.com/keno.html"; alt="Keno at Online Casino 
Focus">Keno at Online Casino Focus
http://www.casino-focus.com/baccarat.html"; alt="Baccarat at Online 
Casino Focus">Baccarat at Online Casino Focus
http://www.casino-focus.com/baccarat.html"; alt="Baccarat">Baccarat

Waiting for your decision, and responce.
Regards, Daniel Bennet.

Re: URL in References

[Julio Rojas]

I believe you have to use Jurabib. It's the only one with a URL record that
works.

On 6/21/06, Christian von Lani-Fischer <[EMAIL PROTECTED]> wrote:


Hi there,
I'm using the actual Version of Lyx and Bibdesk on Mac OS. My problem
is, that i create a Bibdesk entry for a webpage, enter the url in the
specific field but in my generated pdf, the url is not shown. All
other entry types (book, article,..) work fine. What am i doing
wrong? is there maybe a font missing?

Christian





--
-
Julio Rojas
[EMAIL PROTECTED]