Re: Character Styles and LaTeX Commands

[José Matos]

On Friday 02 March 2007 3:19:50 am Juergen Spitzmueller wrote:
 Richard Heck wrote:
  LyxType               Inset

 or rather

 InsetType   {Collapsable|Inline}

 Looks like a valid enhacement to me. Please file a request at bugzilla.

 I agree. :-)

 Jürgen

-- 
José Abílio

Re: how to pronounce LyX

[christian . ridderstrom]

On Fri, 2 Mar 2007, Juergen Spitzmueller wrote:


qwertyu asdfg wrote:

How is LyX pronounced?


http://wiki.lyx.org/FAQ/Pronunciation


The page has links to threads from 2002, so just for fun I added a link to 
this thread as well. In case someone is bored, they could see if there has 
been at least one thread discussing this each year :-)


/C

--
Christian Ridderström, +46-8-768 39 44   http://www.md.kth.se/~chr

Re: LyX version 1.5.0 (beta 1) is released

[Russell Davie]

On Thu, 01 Mar 2007 22:25:30 +0100
Hellmut Weber [EMAIL PROTECTED] wrote:

 Hi,
 I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
 + tetex-3.0_p1-r3
 
 I'm still using LyX-1.3.7 because of the problems I have with some
 special characters like å, ç, accented Letters etc. in LyX-1.4.x.
 
 Some Questions:
 * Can I install LyX-1.5.0beta1 in parallel to LyX-1.3.7? (generating
 manually from the sources probably)


this might do it:
./configure  --with-qt-dir=/usr/share/qt4 --enable-optimization=-O3
--prefix=/usr/local --with-version-suffix=1.5.0b1

Read the INSTALL to get details on how to configure the flags for your purposes.
Or you may wish to do this in a chroot to be sure it behaves!

 
 * Is there a converter from the LyX file format 1.3.7 to 1.5.0.
 (Looking at them with vi there are some obvious differences...)

not sure

 
 * Is Qt4 needed for LyX-1.5.0?

I believe so.  When run, configure looked for this, and said not found.  And 
when I installed qt4, it went perfectly.

HTH

- R

Re: LyX version 1.5.0 (beta 1) is released

[Georg Baum]

Hellmut Weber wrote:

 Hi,
 I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
 + tetex-3.0_p1-r3
 
 I'm still using LyX-1.3.7 because of the problems I have with some
 special characters like å, ç, accented Letters etc. in LyX-1.4.x.

I am not aware of problems with accented characters in 1.4, but they should
be gone in 1.5 anyway. It would be nice if you could test that and file a
bug report if not.

 Some Questions:
 * Can I install LyX-1.5.0beta1 in parallel to LyX-1.3.7? (generating
 manually from the sources probably)

Yes. All you have to do is to compile from source and use the
--with-version-suffix argument of the configure script, e.g.
--with-version-suffix=1.5. Then it will use a different personal
configuration directory, and the binary will be named lyx1.5.
If you don't use that argument then LyX 1.5 will make your old configuration
unusable for LyX 1.3.x.

 * Is there a converter from the LyX file format 1.3.7 to 1.5.0.
 (Looking at them with vi there are some obvious differences...)

Yes. The converter is called lyx2lyx and used automatically, so you can
simply open your old files in 1.5. You can also export them in the old
format again, but that direction is not as complete as the conversion from
1.3 to 1.5.

 * Is Qt4 needed for LyX-1.5.0?

Yes.


Georg

Re: LyX version 1.5.0 (beta 1) is released

[Andrés Becerra Sandoval]

On 3/2/07, Georg Baum [EMAIL PROTECTED] wrote:

Hellmut Weber wrote:

 Hi,
 I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
 + tetex-3.0_p1-r3



There is an experimental ebuild for Gentoo users here:

http://bugs.gentoo.org/show_bug.cgi?id=168799


--
 Andrés

problem (bibtex, makeindex) with lyx 1.5.0 beta1

[Tino Langer]

Hello,

I have some problems using Lyx 1.5.0beta. I want to use bibtex, but noch 
 bibliography is to see. And than I use a special style-file for my 
index, but this file seems not to be used.


Are there known problems with bibtex and makeindex?

Using the same file with Lyx 1.4.4 - everything works fine to me.

thanks - Tino

--
Gäbe es kein Wasser auf der Welt, könnten die Menschen nicht schwimmen 
lernen und müssten alle ertrinken...

How to use PSfrag within LyX?

[Urtzi Jauregi]

HI everybody,

I routinely use PSfrag to embed complex mathematical expressions in EPS 
figures. I'd like to use it under LyX too, but I can't find a place in the 
figure float dialogs to enter the tag-to-formula definitions PSfrag needs. So 
I usually have to export my documento to LaTeX and work with the code by 
hand. Not that I mind terribly, but I'd very much like to be able to produce 
the whole document with a single program. Can I do this under LyX?

 ERT insets would be OK, but I wonder if one can do it the LyX way, just with 
the GUI options.

Cheers,

- Urtzi -

-- 
Urtzi Jauregi
Fakulteta za Matematiko in Fiziko, Univerza v Ljubljani
Jadranska 19, Si-1000 Ljubljana
Slovenija

Tel: ++386 01 540 13 53
e-mail: [EMAIL PROTECTED]

Long Table and Caption

[Jonas Weismueller]

Hi,
I am using Lyx 1.4.3. I followed the instructions on
http://wiki.lyx.org/LyX/Tables#toc10
But I get the following error message:

 \caption
 [Longtable]{Longtable with caption}\\%\selectlanguage{british}
I expect to see \noalign only after the \cr of
an alignment. Proceed, and I'll ignore this case.
 
 
 \caption[Longtable]{Longtable with caption}
\\%\selectlanguage{british}
I expect to see \omit only after tab marks or the \cr of
an alignment. Proceed, and I'll ignore this case.


Any hints?
Thanks in advance.

Cheers Jonas

Re: Long Table and Caption

[Uwe Stöhr]

Jonas Weismueller schrieb:


I am using Lyx 1.4.3. I followed the instructions on
http://wiki.lyx.org/LyX/Tables#toc10
But I get the following error message: ...


Have a look at the EmbeddedObjects manual (part of LyX 1.4.4) in section 2.6.2.
You can also download the manual from here:
http://www.lyx.org/trac/browser/lyx-devel/branches/BRANCH_1_4_X/lib/doc/EmbeddedObjects.lyx
and a PDF version from here:
http://wiki.lyx.org/LyX/DocumentationDevelopment

regards Uwe

Re: Struggling with Cross-refs again

[Richard Heck]

The problem here is that your label is inside the subsection title. If
you move it into the body of the section---just put it at the beginning
of the first paragraph---all should be well. Works for me, anyway.

There's something in the manual about this suggesting it's been fixed.
But it's not fixed in my version. Maybe you should try grabbing the most
recent version of the hyperref bundle and installing that manually.

Here's what seems to be happening. If you look at the .aux file, you'll
see this:

\newlabel{sub:This-is-the}{{2.1}{1}{\label {sub:This-is-the}This is the 
section I want to x-ref\relax }{}{}}


LaTeX thinks the label is part of the title, so when it substitutes the
title of the section for the occurrences of \nameref, the label gets
included. So you end up with \label{sub:This-is-the} three times, the
last of which is in section 3. And if you look at the .aux file on the
next run, you'll see \newlabel occurring an extra three times.

Richard

Stefano Franchi wrote:
Well, I am totally baffled by LyX and LaTeX management of cross 
references. I cannot get  either the LyX command or the \nameref 
command to produce the correct reference.  What happens is that the 
first pass of LaTeX produces the correct reference, then LyX runs 
LaTeX again and the reference is changed to an erroneous value. I can 
actually see this happening in real time if I keep TeXShop open: the 
document is typeset correctly and then re-typeset with the wrong 
value. I am enclosing a sample file LyX file below.
I suppose I must have misunderstood something very basic in LaTeX 
referencing system, but rereading the relevant section of the 
Companion was of no help.

Any advice is appreciated.

Cheers,

S.



 


__
Stefano Franchi
Department of Philosophy  Ph:  (64)  9 373-7599 x83940
University Of AucklandFax: (64) 9 373-8768
Private Bag 92019[EMAIL PROTECTED]
Auckland
New Zealand   



--
Richard G Heck Jr
[EMAIL PROTECTED]
http://bobjweil.com/heck/

Re: How to use PSfrag within LyX?

[Georg Baum]

Urtzi Jauregi wrote:

 HI everybody,
 
 I routinely use PSfrag to embed complex mathematical expressions in EPS
 figures. I'd like to use it under LyX too, but I can't find a place in the
 figure float dialogs to enter the tag-to-formula definitions PSfrag needs.
 So I usually have to export my documento to LaTeX and work with the code
 by hand. Not that I mind terribly, but I'd very much like to be able to
 produce the whole document with a single program. Can I do this under LyX?

Unfortunately not.

  ERT insets would be OK, but I wonder if one can do it the LyX way, just
  with
 the GUI options.

With ERT it works fine (I use it a lot), but there is no GUI yet.


Georg

Inline graphics with Rweave/Sweave, OS X

[Kevin Middleton]

LyXers -

This may be more of an R question than a LyX question, but I thought  
I would try lyx-users first.


Following the instructions on the wiki (http://wiki.lyx.org/LyX/ 
LyxWithRThroughSweave), I successfully setup Rweave (with an small OS  
X caveat, see below). Including R graphics as floats works fine, but  
I can't figure out how to get graphics included inline. I don't even  
know if this is possible. Using the Insert - Graphics dropdown  
brings up a dialog box -- so nowhere to put the Rweave code.


I also tried putting \includegraphics in an ERT box with the sweave  
code inside the {}, but it goes looking for a file called  
label=fig1,fig=T,echo=F=plot(1:10)@. Is there some way to wrap  
the Rweave code?


On a separate note, I'm running LyX 1.4.4 in OS X. Starting LyX from  
the LyX.app bundle and then trying to view PDF generates the  
following error: an error occurred whilst running Rweave  
'testfile.nw'. However, if LyX is started from the command line with  
/Applications/LyX.app/Contents/MacOS/lyx, then Rweave works fine. I  
was going to add this to the LyxWithRThroughSweave wiki page as a  
note. But could another OS X user confirm this behavior for me?


Thanks,
Kevin

Re: How to use PSfrag within LyX?

[Urtzi Jauregi]

On Friday 02 March 2007 17:25:54 Georg Baum wrote:
   ERT insets would be OK, but I wonder if one can do it the LyX way, just
   with
  the GUI options.

 With ERT it works fine (I use it a lot), but there is no GUI yet.

Where exacty do you insert the ERT? I've tried several places, but 
without 
success.

- Urtzi -

-- 
Urtzi Jauregi
Fakulteta za Matematiko in Fiziko, Univerza v Ljubljani
Jadranska 19, Si-1000 Ljubljana
Slovenija

Tel: ++386 01 540 13 53
e-mail: [EMAIL PROTECTED]

Re: LyX version 1.5.0 (beta 1) is released

[Rex Dieter]

José Matos wrote:

 Public release of LyX version 1.5.0 (beta 1)
 ===
 
 We are glad to announce the release of LyX 1.5.0 (beta 1).

Are target release date for 1.5.0 (final)?

-- Rex

LyX-1.4.4 for PPC Macs now available

[Bennett Helm]

Thanks to Anders Ekberg, we now have a version of LyX-1.4.4 for PPC  
Macs that should work. The download link can be found at the LyX/Mac  
wiki page here:


http://wiki.lyx.org/Mac/Mac

(The link there currently points to a server I have access to.  
Sometime in the next few days it will appear on the official LyX  
servers, at which time I will change the link on the wiki page.)


Please report any troubles with it to the list. Hopefully we won't  
need another version!


Thanks for your patience.

Bennett

Re: more paste problems in Lyx 1.5.0 beta 1

[Marcelo Acuña]

  Hello,
   With opensuse 10.2 and kde 3.5 I have another
 paste
  problem.
   
  1) I took (with ctrl + x)  a word for move it.
   Then I put it (with ctrl + v) in other site.
   Then I think that I put word in wrong site.
   Then I delete this word with baskspace key.
   I put cursor in other site, press ctrl + v and
  nothing appears.
   When I press backspace key, buffer with word was
  deleted.
 
 Works here.
 
  2) I confirmed previous paste problem.
   In a window I took (with crtl + c) an ERT (with a
  \setcounter command).
   Click in another window.
   I put cursor in a title of chapter.
   I press ctrl + v.
   ERT appears correctly.
   With mouse wheel I put cursor at the end of
 another
  title of section or chapter and I press ctrl + v.
   Appears a title of section instead ERT.
 
 This works here too.

I confirmed this two errors. Others applications work
without problems: Lyx 1.4.4, Lyx 1.3.7, etc.

Regards
Marcelo







__ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas, 
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: Inline graphics with Rweave/Sweave, OS X

[Gregor Gorjanc]

Kevin Middleton [EMAIL PROTECTED] writes:
 This may be more of an R question than a LyX question, but I thought  
 I would try lyx-users first.

I think this is the right place.

 Following the instructions on the wiki (http://wiki.lyx.org/LyX/ 
 LyxWithRThroughSweave), I successfully setup Rweave (with an small OS  
 X caveat, see below). Including R graphics as floats works fine, but  
 I can't figure out how to get graphics included inline. I don't even  
 know if this is possible. Using the Insert - Graphics dropdown  
 brings up a dialog box -- so nowhere to put the Rweave code.
 
 I also tried putting \includegraphics in an ERT box with the sweave  
 code inside the {}, but it goes looking for a file called  
 label=fig1,fig=T,echo=F=plot(1:10) at . Is there some way to wrap  
 the Rweave code?

Hmm, good catch. I might be wrong, but as far as I can tell this is not
possible. By definition, noweb file must have  in the first column of the
file. Therefore you could only use inline graphics as the very first thing in a
paragraph. But this will work only with ERT and not with scrap style, since that
produces its own paragraph.

 On a separate note, I'm running LyX 1.4.4 in OS X. Starting LyX from  
 the LyX.app bundle and then trying to view PDF generates the  
 following error: an error occurred whilst running Rweave  
 'testfile.nw'. However, if LyX is started from the command line with  
 /Applications/LyX.app/Contents/MacOS/lyx, then Rweave works fine. I  
 was going to add this to the LyxWithRThroughSweave wiki page as a  
 note. But could another OS X user confirm this behavior for me?

I am not an OS X user, but I imagine that Rweave cries due to path problems.

Gregor

Self-define figure label

[Mingfeng Yang]

This is a latex question. Hope someone can help me. 

Usually, latex automatically label figures as Figure 1, Figure 2 etc,
according to their order appearing in the document. Now I am writing a
paper and want to put a few figures in supplemental material section.
How can I let latex label these figures as Figure S1, Figure S2, etc?

Thanks a lot!
Mingfeng

Re: Character Styles and LaTeX Commands

[José Matos]

On Friday 02 March 2007 3:19:50 am Juergen Spitzmueller wrote:
 Richard Heck wrote:
  LyxType               Inset

 or rather

 InsetType   {Collapsable|Inline}

 Looks like a valid enhacement to me. Please file a request at bugzilla.

 I agree. :-)

 Jürgen

-- 
José Abílio

Re: how to pronounce LyX

[christian . ridderstrom]

On Fri, 2 Mar 2007, Juergen Spitzmueller wrote:


qwertyu asdfg wrote:

How is LyX pronounced?


http://wiki.lyx.org/FAQ/Pronunciation


The page has links to threads from 2002, so just for fun I added a link to 
this thread as well. In case someone is bored, they could see if there has 
been at least one thread discussing this each year :-)


/C

--
Christian Ridderström, +46-8-768 39 44   http://www.md.kth.se/~chr

Re: LyX version 1.5.0 (beta 1) is released

[Russell Davie]

On Thu, 01 Mar 2007 22:25:30 +0100
Hellmut Weber [EMAIL PROTECTED] wrote:

 Hi,
 I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
 + tetex-3.0_p1-r3
 
 I'm still using LyX-1.3.7 because of the problems I have with some
 special characters like å, ç, accented Letters etc. in LyX-1.4.x.
 
 Some Questions:
 * Can I install LyX-1.5.0beta1 in parallel to LyX-1.3.7? (generating
 manually from the sources probably)


this might do it:
./configure  --with-qt-dir=/usr/share/qt4 --enable-optimization=-O3
--prefix=/usr/local --with-version-suffix=1.5.0b1

Read the INSTALL to get details on how to configure the flags for your purposes.
Or you may wish to do this in a chroot to be sure it behaves!

 
 * Is there a converter from the LyX file format 1.3.7 to 1.5.0.
 (Looking at them with vi there are some obvious differences...)

not sure

 
 * Is Qt4 needed for LyX-1.5.0?

I believe so.  When run, configure looked for this, and said not found.  And 
when I installed qt4, it went perfectly.

HTH

- R

Re: LyX version 1.5.0 (beta 1) is released

[Georg Baum]

Hellmut Weber wrote:

 Hi,
 I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
 + tetex-3.0_p1-r3
 
 I'm still using LyX-1.3.7 because of the problems I have with some
 special characters like å, ç, accented Letters etc. in LyX-1.4.x.

I am not aware of problems with accented characters in 1.4, but they should
be gone in 1.5 anyway. It would be nice if you could test that and file a
bug report if not.

 Some Questions:
 * Can I install LyX-1.5.0beta1 in parallel to LyX-1.3.7? (generating
 manually from the sources probably)

Yes. All you have to do is to compile from source and use the
--with-version-suffix argument of the configure script, e.g.
--with-version-suffix=1.5. Then it will use a different personal
configuration directory, and the binary will be named lyx1.5.
If you don't use that argument then LyX 1.5 will make your old configuration
unusable for LyX 1.3.x.

 * Is there a converter from the LyX file format 1.3.7 to 1.5.0.
 (Looking at them with vi there are some obvious differences...)

Yes. The converter is called lyx2lyx and used automatically, so you can
simply open your old files in 1.5. You can also export them in the old
format again, but that direction is not as complete as the conversion from
1.3 to 1.5.

 * Is Qt4 needed for LyX-1.5.0?

Yes.


Georg

Re: LyX version 1.5.0 (beta 1) is released

[Andrés Becerra Sandoval]

On 3/2/07, Georg Baum [EMAIL PROTECTED] wrote:

Hellmut Weber wrote:

 Hi,
 I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
 + tetex-3.0_p1-r3



There is an experimental ebuild for Gentoo users here:

http://bugs.gentoo.org/show_bug.cgi?id=168799


--
 Andrés

problem (bibtex, makeindex) with lyx 1.5.0 beta1

[Tino Langer]

Hello,

I have some problems using Lyx 1.5.0beta. I want to use bibtex, but noch 
 bibliography is to see. And than I use a special style-file for my 
index, but this file seems not to be used.


Are there known problems with bibtex and makeindex?

Using the same file with Lyx 1.4.4 - everything works fine to me.

thanks - Tino

--
Gäbe es kein Wasser auf der Welt, könnten die Menschen nicht schwimmen 
lernen und müssten alle ertrinken...

How to use PSfrag within LyX?

[Urtzi Jauregi]

HI everybody,

I routinely use PSfrag to embed complex mathematical expressions in EPS 
figures. I'd like to use it under LyX too, but I can't find a place in the 
figure float dialogs to enter the tag-to-formula definitions PSfrag needs. So 
I usually have to export my documento to LaTeX and work with the code by 
hand. Not that I mind terribly, but I'd very much like to be able to produce 
the whole document with a single program. Can I do this under LyX?

 ERT insets would be OK, but I wonder if one can do it the LyX way, just with 
the GUI options.

Cheers,

- Urtzi -

-- 
Urtzi Jauregi
Fakulteta za Matematiko in Fiziko, Univerza v Ljubljani
Jadranska 19, Si-1000 Ljubljana
Slovenija

Tel: ++386 01 540 13 53
e-mail: [EMAIL PROTECTED]

Long Table and Caption

[Jonas Weismueller]

Hi,
I am using Lyx 1.4.3. I followed the instructions on
http://wiki.lyx.org/LyX/Tables#toc10
But I get the following error message:

 \caption
 [Longtable]{Longtable with caption}\\%\selectlanguage{british}
I expect to see \noalign only after the \cr of
an alignment. Proceed, and I'll ignore this case.
 
 
 \caption[Longtable]{Longtable with caption}
\\%\selectlanguage{british}
I expect to see \omit only after tab marks or the \cr of
an alignment. Proceed, and I'll ignore this case.


Any hints?
Thanks in advance.

Cheers Jonas

Re: Long Table and Caption

[Uwe Stöhr]

Jonas Weismueller schrieb:


I am using Lyx 1.4.3. I followed the instructions on
http://wiki.lyx.org/LyX/Tables#toc10
But I get the following error message: ...


Have a look at the EmbeddedObjects manual (part of LyX 1.4.4) in section 2.6.2.
You can also download the manual from here:
http://www.lyx.org/trac/browser/lyx-devel/branches/BRANCH_1_4_X/lib/doc/EmbeddedObjects.lyx
and a PDF version from here:
http://wiki.lyx.org/LyX/DocumentationDevelopment

regards Uwe

Re: Struggling with Cross-refs again

[Richard Heck]

The problem here is that your label is inside the subsection title. If
you move it into the body of the section---just put it at the beginning
of the first paragraph---all should be well. Works for me, anyway.

There's something in the manual about this suggesting it's been fixed.
But it's not fixed in my version. Maybe you should try grabbing the most
recent version of the hyperref bundle and installing that manually.

Here's what seems to be happening. If you look at the .aux file, you'll
see this:

\newlabel{sub:This-is-the}{{2.1}{1}{\label {sub:This-is-the}This is the 
section I want to x-ref\relax }{}{}}


LaTeX thinks the label is part of the title, so when it substitutes the
title of the section for the occurrences of \nameref, the label gets
included. So you end up with \label{sub:This-is-the} three times, the
last of which is in section 3. And if you look at the .aux file on the
next run, you'll see \newlabel occurring an extra three times.

Richard

Stefano Franchi wrote:
Well, I am totally baffled by LyX and LaTeX management of cross 
references. I cannot get  either the LyX command or the \nameref 
command to produce the correct reference.  What happens is that the 
first pass of LaTeX produces the correct reference, then LyX runs 
LaTeX again and the reference is changed to an erroneous value. I can 
actually see this happening in real time if I keep TeXShop open: the 
document is typeset correctly and then re-typeset with the wrong 
value. I am enclosing a sample file LyX file below.
I suppose I must have misunderstood something very basic in LaTeX 
referencing system, but rereading the relevant section of the 
Companion was of no help.

Any advice is appreciated.

Cheers,

S.



 


__
Stefano Franchi
Department of Philosophy  Ph:  (64)  9 373-7599 x83940
University Of AucklandFax: (64) 9 373-8768
Private Bag 92019[EMAIL PROTECTED]
Auckland
New Zealand   



--
Richard G Heck Jr
[EMAIL PROTECTED]
http://bobjweil.com/heck/

Re: How to use PSfrag within LyX?

[Georg Baum]

Urtzi Jauregi wrote:

 HI everybody,
 
 I routinely use PSfrag to embed complex mathematical expressions in EPS
 figures. I'd like to use it under LyX too, but I can't find a place in the
 figure float dialogs to enter the tag-to-formula definitions PSfrag needs.
 So I usually have to export my documento to LaTeX and work with the code
 by hand. Not that I mind terribly, but I'd very much like to be able to
 produce the whole document with a single program. Can I do this under LyX?

Unfortunately not.

  ERT insets would be OK, but I wonder if one can do it the LyX way, just
  with
 the GUI options.

With ERT it works fine (I use it a lot), but there is no GUI yet.


Georg

Inline graphics with Rweave/Sweave, OS X

[Kevin Middleton]

LyXers -

This may be more of an R question than a LyX question, but I thought  
I would try lyx-users first.


Following the instructions on the wiki (http://wiki.lyx.org/LyX/ 
LyxWithRThroughSweave), I successfully setup Rweave (with an small OS  
X caveat, see below). Including R graphics as floats works fine, but  
I can't figure out how to get graphics included inline. I don't even  
know if this is possible. Using the Insert - Graphics dropdown  
brings up a dialog box -- so nowhere to put the Rweave code.


I also tried putting \includegraphics in an ERT box with the sweave  
code inside the {}, but it goes looking for a file called  
label=fig1,fig=T,echo=F=plot(1:10)@. Is there some way to wrap  
the Rweave code?


On a separate note, I'm running LyX 1.4.4 in OS X. Starting LyX from  
the LyX.app bundle and then trying to view PDF generates the  
following error: an error occurred whilst running Rweave  
'testfile.nw'. However, if LyX is started from the command line with  
/Applications/LyX.app/Contents/MacOS/lyx, then Rweave works fine. I  
was going to add this to the LyxWithRThroughSweave wiki page as a  
note. But could another OS X user confirm this behavior for me?


Thanks,
Kevin

Re: How to use PSfrag within LyX?

[Urtzi Jauregi]

On Friday 02 March 2007 17:25:54 Georg Baum wrote:
   ERT insets would be OK, but I wonder if one can do it the LyX way, just
   with
  the GUI options.

 With ERT it works fine (I use it a lot), but there is no GUI yet.

Where exacty do you insert the ERT? I've tried several places, but 
without 
success.

- Urtzi -

-- 
Urtzi Jauregi
Fakulteta za Matematiko in Fiziko, Univerza v Ljubljani
Jadranska 19, Si-1000 Ljubljana
Slovenija

Tel: ++386 01 540 13 53
e-mail: [EMAIL PROTECTED]

Re: LyX version 1.5.0 (beta 1) is released

[Rex Dieter]

José Matos wrote:

 Public release of LyX version 1.5.0 (beta 1)
 ===
 
 We are glad to announce the release of LyX 1.5.0 (beta 1).

Are target release date for 1.5.0 (final)?

-- Rex

LyX-1.4.4 for PPC Macs now available

[Bennett Helm]

Thanks to Anders Ekberg, we now have a version of LyX-1.4.4 for PPC  
Macs that should work. The download link can be found at the LyX/Mac  
wiki page here:


http://wiki.lyx.org/Mac/Mac

(The link there currently points to a server I have access to.  
Sometime in the next few days it will appear on the official LyX  
servers, at which time I will change the link on the wiki page.)


Please report any troubles with it to the list. Hopefully we won't  
need another version!


Thanks for your patience.

Bennett

Re: more paste problems in Lyx 1.5.0 beta 1

[Marcelo Acuña]

  Hello,
   With opensuse 10.2 and kde 3.5 I have another
 paste
  problem.
   
  1) I took (with ctrl + x)  a word for move it.
   Then I put it (with ctrl + v) in other site.
   Then I think that I put word in wrong site.
   Then I delete this word with baskspace key.
   I put cursor in other site, press ctrl + v and
  nothing appears.
   When I press backspace key, buffer with word was
  deleted.
 
 Works here.
 
  2) I confirmed previous paste problem.
   In a window I took (with crtl + c) an ERT (with a
  \setcounter command).
   Click in another window.
   I put cursor in a title of chapter.
   I press ctrl + v.
   ERT appears correctly.
   With mouse wheel I put cursor at the end of
 another
  title of section or chapter and I press ctrl + v.
   Appears a title of section instead ERT.
 
 This works here too.

I confirmed this two errors. Others applications work
without problems: Lyx 1.4.4, Lyx 1.3.7, etc.

Regards
Marcelo







__ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas, 
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: Inline graphics with Rweave/Sweave, OS X

[Gregor Gorjanc]

Kevin Middleton [EMAIL PROTECTED] writes:
 This may be more of an R question than a LyX question, but I thought  
 I would try lyx-users first.

I think this is the right place.

 Following the instructions on the wiki (http://wiki.lyx.org/LyX/ 
 LyxWithRThroughSweave), I successfully setup Rweave (with an small OS  
 X caveat, see below). Including R graphics as floats works fine, but  
 I can't figure out how to get graphics included inline. I don't even  
 know if this is possible. Using the Insert - Graphics dropdown  
 brings up a dialog box -- so nowhere to put the Rweave code.
 
 I also tried putting \includegraphics in an ERT box with the sweave  
 code inside the {}, but it goes looking for a file called  
 label=fig1,fig=T,echo=F=plot(1:10) at . Is there some way to wrap  
 the Rweave code?

Hmm, good catch. I might be wrong, but as far as I can tell this is not
possible. By definition, noweb file must have  in the first column of the
file. Therefore you could only use inline graphics as the very first thing in a
paragraph. But this will work only with ERT and not with scrap style, since that
produces its own paragraph.

 On a separate note, I'm running LyX 1.4.4 in OS X. Starting LyX from  
 the LyX.app bundle and then trying to view PDF generates the  
 following error: an error occurred whilst running Rweave  
 'testfile.nw'. However, if LyX is started from the command line with  
 /Applications/LyX.app/Contents/MacOS/lyx, then Rweave works fine. I  
 was going to add this to the LyxWithRThroughSweave wiki page as a  
 note. But could another OS X user confirm this behavior for me?

I am not an OS X user, but I imagine that Rweave cries due to path problems.

Gregor

Self-define figure label

[Mingfeng Yang]

This is a latex question. Hope someone can help me. 

Usually, latex automatically label figures as Figure 1, Figure 2 etc,
according to their order appearing in the document. Now I am writing a
paper and want to put a few figures in supplemental material section.
How can I let latex label these figures as Figure S1, Figure S2, etc?

Thanks a lot!
Mingfeng

Re: Character Styles and LaTeX Commands

[José Matos]

On Friday 02 March 2007 3:19:50 am Juergen Spitzmueller wrote:
> Richard Heck wrote:
> > LyxType               Inset
>
> or rather
>
> InsetType   {Collapsable|Inline}
>
> Looks like a valid enhacement to me. Please file a request at bugzilla.

 I agree. :-)

> Jürgen

-- 
José Abílio

Re: how to pronounce LyX

[christian . ridderstrom]

On Fri, 2 Mar 2007, Juergen Spitzmueller wrote:


qwertyu asdfg wrote:

How is LyX pronounced?


http://wiki.lyx.org/FAQ/Pronunciation


The page has links to threads from 2002, so just for fun I added a link to 
this thread as well. In case someone is bored, they could see if there has 
been at least one thread discussing this each year :-)


/C

--
Christian Ridderström, +46-8-768 39 44   http://www.md.kth.se/~chr

Re: LyX version 1.5.0 (beta 1) is released

[Russell Davie]

On Thu, 01 Mar 2007 22:25:30 +0100
Hellmut Weber <[EMAIL PROTECTED]> wrote:

> Hi,
> I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
> + tetex-3.0_p1-r3
> 
> I'm still using LyX-1.3.7 because of the problems I have with some
> special characters like å, ç, accented Letters etc. in LyX-1.4.x.
> 
> Some Questions:
> * Can I install LyX-1.5.0beta1 in parallel to LyX-1.3.7? (generating
> manually from the sources probably)


this might do it:
./configure  --with-qt-dir=/usr/share/qt4 --enable-optimization=-O3
--prefix=/usr/local --with-version-suffix=1.5.0b1

Read the INSTALL to get details on how to configure the flags for your purposes.
Or you may wish to do this in a chroot to be sure it behaves!

> 
> * Is there a converter from the LyX file format 1.3.7 to 1.5.0.
> (Looking at them with vi there are some obvious differences...)

not sure

> 
> * Is Qt4 needed for LyX-1.5.0?

I believe so.  When run, configure looked for this, and said "not found".  And 
when I installed qt4, it went perfectly.

HTH

- R

>

Re: LyX version 1.5.0 (beta 1) is released

[Georg Baum]

Hellmut Weber wrote:

> Hi,
> I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
> + tetex-3.0_p1-r3
> 
> I'm still using LyX-1.3.7 because of the problems I have with some
> special characters like å, ç, accented Letters etc. in LyX-1.4.x.

I am not aware of problems with accented characters in 1.4, but they should
be gone in 1.5 anyway. It would be nice if you could test that and file a
bug report if not.

> Some Questions:
> * Can I install LyX-1.5.0beta1 in parallel to LyX-1.3.7? (generating
> manually from the sources probably)

Yes. All you have to do is to compile from source and use the
--with-version-suffix argument of the configure script, e.g.
--with-version-suffix=1.5. Then it will use a different personal
configuration directory, and the binary will be named lyx1.5.
If you don't use that argument then LyX 1.5 will make your old configuration
unusable for LyX 1.3.x.

> * Is there a converter from the LyX file format 1.3.7 to 1.5.0.
> (Looking at them with vi there are some obvious differences...)

Yes. The converter is called lyx2lyx and used automatically, so you can
simply open your old files in 1.5. You can also export them in the old
format again, but that direction is not as complete as the conversion from
1.3 to 1.5.

> * Is Qt4 needed for LyX-1.5.0?

Yes.


Georg

Re: LyX version 1.5.0 (beta 1) is released

[Andrés Becerra Sandoval]

On 3/2/07, Georg Baum <[EMAIL PROTECTED]> wrote:

Hellmut Weber wrote:

> Hi,
> I'm working on an IBM Lenovo ThinkPad T60 with gentoo-Linux + KDE-3.5.6
> + tetex-3.0_p1-r3
>


There is an experimental ebuild for Gentoo users here:

http://bugs.gentoo.org/show_bug.cgi?id=168799


--
 Andrés

problem (bibtex, makeindex) with lyx 1.5.0 beta1

[Tino Langer]

Hello,

I have some problems using Lyx 1.5.0beta. I want to use bibtex, but noch 
 bibliography is to see. And than I use a special style-file for my 
index, but this file seems not to be used.


Are there known problems with bibtex and makeindex?

Using the same file with Lyx 1.4.4 - everything works fine to me.

thanks - Tino

--
Gäbe es kein Wasser auf der Welt, könnten die Menschen nicht schwimmen 
lernen und müssten alle ertrinken...

How to use PSfrag within LyX?

[Urtzi Jauregi]

HI everybody,

I routinely use PSfrag to embed complex mathematical expressions in EPS 
figures. I'd like to use it under LyX too, but I can't find a place in the 
figure float dialogs to enter the tag-to-formula definitions PSfrag needs. So 
I usually have to export my documento to LaTeX and work with the code by 
hand. Not that I mind terribly, but I'd very much like to be able to produce 
the whole document with a single program. Can I do this under LyX?

 ERT insets would be OK, but I wonder if one can do it the LyX way, just with 
the GUI options.

Cheers,

- Urtzi -

-- 
Urtzi Jauregi
Fakulteta za Matematiko in Fiziko, Univerza v Ljubljani
Jadranska 19, Si-1000 Ljubljana
Slovenija

Tel: ++386 01 540 13 53
e-mail: [EMAIL PROTECTED]

Long Table and Caption

[Jonas Weismueller]

Hi,
I am using Lyx 1.4.3. I followed the instructions on
http://wiki.lyx.org/LyX/Tables#toc10
But I get the following error message:

 \caption
 [Longtable]{Longtable with caption}\\%\selectlanguage{british}
I expect to see \noalign only after the \cr of
an alignment. Proceed, and I'll ignore this case.
 
 
 \caption[Longtable]{Longtable with caption}
\\%\selectlanguage{british}
I expect to see \omit only after tab marks or the \cr of
an alignment. Proceed, and I'll ignore this case.


Any hints?
Thanks in advance.

Cheers Jonas

Re: Long Table and Caption

[Uwe Stöhr]

Jonas Weismueller schrieb:


I am using Lyx 1.4.3. I followed the instructions on
http://wiki.lyx.org/LyX/Tables#toc10
But I get the following error message: ...


Have a look at the EmbeddedObjects manual (part of LyX 1.4.4) in section 2.6.2.
You can also download the manual from here:
http://www.lyx.org/trac/browser/lyx-devel/branches/BRANCH_1_4_X/lib/doc/EmbeddedObjects.lyx
and a PDF version from here:
http://wiki.lyx.org/LyX/DocumentationDevelopment

regards Uwe

Re: Struggling with Cross-refs again

[Richard Heck]

The problem here is that your label is inside the subsection title. If
you move it into the body of the section---just put it at the beginning
of the first paragraph---all should be well. Works for me, anyway.

There's something in the manual about this suggesting it's been fixed.
But it's not fixed in my version. Maybe you should try grabbing the most
recent version of the hyperref bundle and installing that manually.

Here's what seems to be happening. If you look at the .aux file, you'll
see this:

\newlabel{sub:This-is-the}{{2.1}{1}{\label {sub:This-is-the}This is the 
section I want to x-ref\relax }{}{}}


LaTeX thinks the label is part of the title, so when it substitutes the
title of the section for the occurrences of \nameref, the label gets
included. So you end up with "\label{sub:This-is-the}" three times, the
last of which is in section 3. And if you look at the .aux file on the
next run, you'll see \newlabel occurring an extra three times.

Richard

Stefano Franchi wrote:
Well, I am totally baffled by LyX and LaTeX management of cross 
references. I cannot get  either the LyX command or the \nameref 
command to produce the correct reference.  What happens is that the 
first pass of LaTeX produces the correct reference, then LyX runs 
LaTeX again and the reference is changed to an erroneous value. I can 
actually see this happening in real time if I keep TeXShop open: the 
document is typeset correctly and then re-typeset with the wrong 
value. I am enclosing a sample file LyX file below.
I suppose I must have misunderstood something very basic in LaTeX 
referencing system, but rereading the relevant section of the 
Companion was of no help.

Any advice is appreciated.

Cheers,

S.



 


__
Stefano Franchi
Department of Philosophy  Ph:  (64)  9 373-7599 x83940
University Of AucklandFax: (64) 9 373-8768
Private Bag 92019[EMAIL PROTECTED]
Auckland
New Zealand   



--
Richard G Heck Jr
[EMAIL PROTECTED]
http://bobjweil.com/heck/

Re: How to use PSfrag within LyX?

[Georg Baum]

Urtzi Jauregi wrote:

> HI everybody,
> 
> I routinely use PSfrag to embed complex mathematical expressions in EPS
> figures. I'd like to use it under LyX too, but I can't find a place in the
> figure float dialogs to enter the tag-to-formula definitions PSfrag needs.
> So I usually have to export my documento to LaTeX and work with the code
> by hand. Not that I mind terribly, but I'd very much like to be able to
> produce the whole document with a single program. Can I do this under LyX?

Unfortunately not.

>  ERT insets would be OK, but I wonder if one can do it the LyX way, just
>  with
> the GUI options.

With ERT it works fine (I use it a lot), but there is no GUI yet.


Georg

Inline graphics with Rweave/Sweave, OS X

[Kevin Middleton]

LyXers -

This may be more of an R question than a LyX question, but I thought  
I would try lyx-users first.


Following the instructions on the wiki (http://wiki.lyx.org/LyX/ 
LyxWithRThroughSweave), I successfully setup Rweave (with an small OS  
X caveat, see below). Including R graphics as floats works fine, but  
I can't figure out how to get graphics included inline. I don't even  
know if this is possible. Using the Insert -> Graphics dropdown  
brings up a dialog box -- so nowhere to put the Rweave code.


I also tried putting \includegraphics in an ERT box with the sweave  
code inside the {}, but it goes looking for a file called  

Re: How to use PSfrag within LyX?

[Urtzi Jauregi]

On Friday 02 March 2007 17:25:54 Georg Baum wrote:
> >  ERT insets would be OK, but I wonder if one can do it the LyX way, just
> >  with
> > the GUI options.
>
> With ERT it works fine (I use it a lot), but there is no GUI yet.

Where exacty do you insert the ERT? I've tried several places, but 
without 
success.

- Urtzi -

-- 
Urtzi Jauregi
Fakulteta za Matematiko in Fiziko, Univerza v Ljubljani
Jadranska 19, Si-1000 Ljubljana
Slovenija

Tel: ++386 01 540 13 53
e-mail: [EMAIL PROTECTED]

Re: LyX version 1.5.0 (beta 1) is released

[Rex Dieter]

José Matos wrote:

> Public release of LyX version 1.5.0 (beta 1)
> ===
> 
> We are glad to announce the release of LyX 1.5.0 (beta 1).

Are target release date for 1.5.0 (final)?

-- Rex

LyX-1.4.4 for PPC Macs now available

[Bennett Helm]

Thanks to Anders Ekberg, we now have a version of LyX-1.4.4 for PPC  
Macs that should work. The download link can be found at the LyX/Mac  
wiki page here:




(The link there currently points to a server I have access to.  
Sometime in the next few days it will appear on the official LyX  
servers, at which time I will change the link on the wiki page.)


Please report any troubles with it to the list. Hopefully we won't  
need another version!


Thanks for your patience.

Bennett

Re: more paste problems in Lyx 1.5.0 beta 1

[Marcelo Acuña]

> > Hello,
> >  With opensuse 10.2 and kde 3.5 I have another
> paste
> > problem.
> >  
> > 1) I took (with ctrl + x)  a word for move it.
> >  Then I put it (with ctrl + v) in other site.
> >  Then I think that I put word in wrong site.
> >  Then I delete this word with baskspace key.
> >  I put cursor in other site, press ctrl + v and
> > nothing appears.
> >  When I press backspace key, buffer with word was
> > deleted.
> 
> Works here.
> 
> > 2) I confirmed previous paste problem.
> >  In a window I took (with crtl + c) an ERT (with a
> > \setcounter command).
> >  Click in another window.
> >  I put cursor in a title of chapter.
> >  I press ctrl + v.
> >  ERT appears correctly.
> >  With mouse wheel I put cursor at the end of
> another
> > title of section or chapter and I press ctrl + v.
> >  Appears a title of section instead ERT.
> 
> This works here too.

I confirmed this two errors. Others applications work
without problems: Lyx 1.4.4, Lyx 1.3.7, etc.

Regards
Marcelo







__ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas, 
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: Inline graphics with Rweave/Sweave, OS X

[Gregor Gorjanc]

Kevin Middleton <[EMAIL PROTECTED]> writes:
> This may be more of an R question than a LyX question, but I thought  
> I would try lyx-users first.

I think this is the right place.

> Following the instructions on the wiki (http://wiki.lyx.org/LyX/ 
> LyxWithRThroughSweave), I successfully setup Rweave (with an small OS  
> X caveat, see below). Including R graphics as floats works fine, but  
> I can't figure out how to get graphics included inline. I don't even  
> know if this is possible. Using the Insert -> Graphics dropdown  
> brings up a dialog box -- so nowhere to put the Rweave code.
> 
> I also tried putting \includegraphics in an ERT box with the sweave  
> code inside the {}, but it goes looking for a file called  
> 

Self-define figure label

[Mingfeng Yang]

This is a latex question. Hope someone can help me. 

Usually, latex automatically label figures as Figure 1, Figure 2 etc,
according to their order appearing in the document. Now I am writing a
paper and want to put a few figures in supplemental material section.
How can I let latex label these figures as Figure S1, Figure S2, etc?

Thanks a lot!
Mingfeng