Bibliography does not print when using biblatex instead of bibtex
Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536 Linux member
Re: degrees Celsius in Lyx
Thanks for the hints re degrees Celsius in Lyx
Wolfgang
Am 26.06.2015 um 10:31 schrieb aparsloe:
On 26/06/2015 8:07 p.m., Wolfgang Engelmann wrote:
This is the correct latex way for 100 degrees Celsius, I believe:
100\,^{\circ}\mathrm{C}
\, is for a certain distance between 100 and ^0
Is there a shortcut in lyx for achieving it?
Under
Symbolscharacter-like symbols
I find
^{\circ}\mathrm{C}
but do I have to enter \, in tex
or is half distance under formation the correct one?
(sorry, the English expressions are probably different)
The best solution would be to have an all over replacement of my
100\textcelsius
by
100\,^{\circ}\mathrm{C}
Possible in Lyx (advanced search and replace)?
Wolfgang
Ctrl+Shift+Space gives \, on my system (but check in the Source Pane).
Andrew
xdvi problem in lyx 2.1.2
I recently upgraded to lyx 2.1.2.
The following preamble worked fine until I did the upgrade.
* \usepackage{geometry}
* \newgeometry{top=.85in, bottom=.85in, left=1.30in, right=.65in}
* \setlength{\footskip}{15pt}\usepackage{fancyhdr}
* \usepackage{color}
* \lhead{\small{www.dedoimedo.com}}
* \rhead{\small{all rights reserved}}
* \date{}
* \usepackage{caption}
*
\captionsetup{labelfont=bf,format=plain,indention=0cm,justification=ragg
edright,singlelinecheck=false}
* \usepackage{enumitem}
* \usepackage[hang,splitrule]{footmisc}
* \addtolength{\footskip}{0.5cm}
* \setlength{\footnotemargin}{0.3cm}
* \setlength{\footnotesep}{0.4cm}
* \usepackage{multirow}
* \usepackage{rotating}
* \usepackage{listings}
* \renewcommand{\arraystretch}{2}
* \usepackage{watermark}
* %\usepackage{geometry}
* % \newgeometry{top=.85in, bottom=.85in, left=1.0in, right=1.0in}
* \usepackage{ulem}
*\usepackage{pstricks}
*
*
*
*
* % BEGIN left and right vertical lines, and line numbers.
*
* \usepackage{eso-pic}
* \usepackage{calc}
* \newlength{\leftruleA}
* \setlength{\leftruleA}{3.2\leftmargin-\marginparsep}
* \newlength{\leftruleB}
* \setlength{\leftruleB}{3.0\leftmargin-\marginparsep}
* \newlength{\rightrule}
* \setlength{\rightrule}{3.0\leftmargin+\textwidth+\marginparsep}
* \AddToShipoutPicture{%
* \put(\LenToUnit{\leftruleA},0){\rule{.5pt}{\paperheight-.5in}} %
First rule on the left
* \put(\LenToUnit{\leftruleB},0){\rule{.5pt}{\paperheight-.5in}} %
Second rule on the left
* \put(\LenToUnit{\rightrule},0){\rule{.5pt}{\paperheight-.5in}} %
Rule on the right
* \rput(1.6,13.74){
* \begin{minipage}[t]{20mm}
* \begin{flushright}
* \begin{doublespace}
*
1\\2\\3\\4\\5\\6\\7\\8\\9\\10\\11\\12\\13\\14\\15\\16\\17\\18\\19\\20\\21\\22\\23
\\24\\25\\26\\27\\28
* \end{doublespace}
* \end{flushright}
* \end{minipage}
* }
* }
*
*
* % END left and right vertical lines, and line numbers.
* \let\OrgIndex\index
*
* \renewcommand*{\index}[1]{\OrgIndex{#1}}
*
But now xdvik (cntrl-D) shows the line numbers starting half-way down the
page, rather than at the top of the page.
Lyx still prints fine. Its only the xdvi view that is screwed up.
Any suggestions?
Bibliography does not print when using biblatex instead of bibtex
Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536 Linux member
Re: Enumerate changes spacing over 2 pages
On 2015-06-25, Mark Garrow wrote: [-- Type: text/plain, Encoding: --] I have an enumerated list under a section with a number of items that are indented one level. The list begins towards the bottom of the page and continues on the next page. The spacing on the list items on the second page changes drastically from what appear to be 1 line to several lines. I've attached a pdf of the 2 pages in question so it's easier to see what I'm talking about. Any suggestions on how to remedy this would be greatly appreciated. Typically this is caused by stretching space: TeX tries to get the same size for the text block both horizontally and vertically by a certain amount of variable inter-word space (horizontally) and inter-paragraph space (vertically). You could try to redefine \parset and \itemsep without variable space in the LaTeX preamble. Alternatively, you may try to shrink the text block on the second page via the \raggedbottom command (as ERT (i.e. LaTeX-box)) after the end of the list. Günter
Bibliography does not print after switching to biblatex
Dear Friends of LyX, I used bibtex in various documents with single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in the wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step and can cite the references but the bibliography does not show in the LyX-text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536
Re: Bibliography does not print when using biblatex instead of bibtex
On 06/30/2015 11:19 AM, Michael Berger wrote: PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Do you have up-to-date versions of biblatex (3.0) and biber (2.1)? Johannes
Re: Bibliography does not print when using biblatex instead of bibtex
It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the
recipe from the same wiki page.
Attaching a working example, might help.
@BOOK{monroe:1955,
title = {{R}adio {O}n},
publisher = {Addison--Wesley},
year = {1955},
author = {Marilyn Monroe},
address = {Los Angeles, CA, USA}
}
MM_biblatex.lyx
Description: application/lyx
Re: Bibliography does not print when using biblatex instead of bibtex
On 06/30/2015 05:19 AM, Michael Berger wrote: Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 A minimal (non)working example would definitely help here: a short .lyx file and accompanying .bib. It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the recipe from the same wiki page.
Re: Bibliography does not print when using biblatex instead of bibtex
It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the
recipe from the same wiki page.
Attaching a working example, might help.
@BOOK{monroe:1955,
title = {{R}adio {O}n},
publisher = {Addison--Wesley},
year = {1955},
author = {Marilyn Monroe},
address = {Los Angeles, CA, USA}
}
MM-biblatex.lyx
Description: application/lyx
Bibliography does not print when using biblatex instead of bibtex
Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536 Linux member
Re: degrees Celsius in Lyx
Thanks for the hints re degrees Celsius in Lyx
Wolfgang
Am 26.06.2015 um 10:31 schrieb aparsloe:
On 26/06/2015 8:07 p.m., Wolfgang Engelmann wrote:
This is the correct latex way for 100 degrees Celsius, I believe:
100\,^{\circ}\mathrm{C}
\, is for a certain distance between 100 and ^0
Is there a shortcut in lyx for achieving it?
Under
Symbolscharacter-like symbols
I find
^{\circ}\mathrm{C}
but do I have to enter \, in tex
or is half distance under formation the correct one?
(sorry, the English expressions are probably different)
The best solution would be to have an all over replacement of my
100\textcelsius
by
100\,^{\circ}\mathrm{C}
Possible in Lyx (advanced search and replace)?
Wolfgang
Ctrl+Shift+Space gives \, on my system (but check in the Source Pane).
Andrew
xdvi problem in lyx 2.1.2
I recently upgraded to lyx 2.1.2.
The following preamble worked fine until I did the upgrade.
* \usepackage{geometry}
* \newgeometry{top=.85in, bottom=.85in, left=1.30in, right=.65in}
* \setlength{\footskip}{15pt}\usepackage{fancyhdr}
* \usepackage{color}
* \lhead{\small{www.dedoimedo.com}}
* \rhead{\small{all rights reserved}}
* \date{}
* \usepackage{caption}
*
\captionsetup{labelfont=bf,format=plain,indention=0cm,justification=ragg
edright,singlelinecheck=false}
* \usepackage{enumitem}
* \usepackage[hang,splitrule]{footmisc}
* \addtolength{\footskip}{0.5cm}
* \setlength{\footnotemargin}{0.3cm}
* \setlength{\footnotesep}{0.4cm}
* \usepackage{multirow}
* \usepackage{rotating}
* \usepackage{listings}
* \renewcommand{\arraystretch}{2}
* \usepackage{watermark}
* %\usepackage{geometry}
* % \newgeometry{top=.85in, bottom=.85in, left=1.0in, right=1.0in}
* \usepackage{ulem}
*\usepackage{pstricks}
*
*
*
*
* % BEGIN left and right vertical lines, and line numbers.
*
* \usepackage{eso-pic}
* \usepackage{calc}
* \newlength{\leftruleA}
* \setlength{\leftruleA}{3.2\leftmargin-\marginparsep}
* \newlength{\leftruleB}
* \setlength{\leftruleB}{3.0\leftmargin-\marginparsep}
* \newlength{\rightrule}
* \setlength{\rightrule}{3.0\leftmargin+\textwidth+\marginparsep}
* \AddToShipoutPicture{%
* \put(\LenToUnit{\leftruleA},0){\rule{.5pt}{\paperheight-.5in}} %
First rule on the left
* \put(\LenToUnit{\leftruleB},0){\rule{.5pt}{\paperheight-.5in}} %
Second rule on the left
* \put(\LenToUnit{\rightrule},0){\rule{.5pt}{\paperheight-.5in}} %
Rule on the right
* \rput(1.6,13.74){
* \begin{minipage}[t]{20mm}
* \begin{flushright}
* \begin{doublespace}
*
1\\2\\3\\4\\5\\6\\7\\8\\9\\10\\11\\12\\13\\14\\15\\16\\17\\18\\19\\20\\21\\22\\23
\\24\\25\\26\\27\\28
* \end{doublespace}
* \end{flushright}
* \end{minipage}
* }
* }
*
*
* % END left and right vertical lines, and line numbers.
* \let\OrgIndex\index
*
* \renewcommand*{\index}[1]{\OrgIndex{#1}}
*
But now xdvik (cntrl-D) shows the line numbers starting half-way down the
page, rather than at the top of the page.
Lyx still prints fine. Its only the xdvi view that is screwed up.
Any suggestions?
Bibliography does not print after switching to biblatex
Dear Friends of LyX, I used bibtex in various documents with single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in the wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step and can cite the references but the bibliography does not show in the LyX-text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536
Re: Enumerate changes spacing over 2 pages
On 2015-06-25, Mark Garrow wrote: [-- Type: text/plain, Encoding: --] I have an enumerated list under a section with a number of items that are indented one level. The list begins towards the bottom of the page and continues on the next page. The spacing on the list items on the second page changes drastically from what appear to be 1 line to several lines. I've attached a pdf of the 2 pages in question so it's easier to see what I'm talking about. Any suggestions on how to remedy this would be greatly appreciated. Typically this is caused by stretching space: TeX tries to get the same size for the text block both horizontally and vertically by a certain amount of variable inter-word space (horizontally) and inter-paragraph space (vertically). You could try to redefine \parset and \itemsep without variable space in the LaTeX preamble. Alternatively, you may try to shrink the text block on the second page via the \raggedbottom command (as ERT (i.e. LaTeX-box)) after the end of the list. Günter
Re: Bibliography does not print when using biblatex instead of bibtex
On 06/30/2015 11:19 AM, Michael Berger wrote: PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Do you have up-to-date versions of biblatex (3.0) and biber (2.1)? Johannes
Bibliography does not print when using biblatex instead of bibtex
Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under Known problems I did 'biber --cache' which resulted in: No cache - you are not running the PAR: Packer executable of biber What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536 Linux member
Re: Bibliography does not print when using biblatex instead of bibtex
On 06/30/2015 05:19 AM, Michael Berger wrote: Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found Using biblatex with LyX in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 A minimal (non)working example would definitely help here: a short .lyx file and accompanying .bib. It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the recipe from the same wiki page.
Re: Bibliography does not print when using biblatex instead of bibtex
It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the
recipe from the same wiki page.
Attaching a working example, might help.
@BOOK{monroe:1955,
title = {{R}adio {O}n},
publisher = {Addison--Wesley},
year = {1955},
author = {Marilyn Monroe},
address = {Los Angeles, CA, USA}
}
MM-biblatex.lyx
Description: application/lyx
Re: Bibliography does not print when using biblatex instead of bibtex
It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the
recipe from the same wiki page.
Attaching a working example, might help.
@BOOK{monroe:1955,
title = {{R}adio {O}n},
publisher = {Addison--Wesley},
year = {1955},
author = {Marilyn Monroe},
address = {Los Angeles, CA, USA}
}
MM_biblatex.lyx
Description: application/lyx
Bibliography does not print when using biblatex instead of bibtex
Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found "Using biblatex with LyX" in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under "Known problems" I did 'biber --cache' which resulted in: "No cache - you are not running the PAR: Packer executable of biber" What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536 Linux member
Re: degrees Celsius in Lyx
Thanks for the hints re degrees Celsius in Lyx
Wolfgang
Am 26.06.2015 um 10:31 schrieb aparsloe:
On 26/06/2015 8:07 p.m., Wolfgang Engelmann wrote:
This is the correct latex way for 100 degrees Celsius, I believe:
100\,^{\circ}\mathrm{C}
\, is for a certain distance between 100 and ^0
Is there a shortcut in lyx for achieving it?
Under
Symbols>character-like symbols>
I find
^{\circ}\mathrm{C}
but do I have to enter \, in tex
or is "half distance" under formation the correct one?
(sorry, the English expressions are probably different)
The best solution would be to have an all over replacement of my
100\textcelsius
by
100\,^{\circ}\mathrm{C}
Possible in Lyx (advanced search and replace)?
Wolfgang
Ctrl+Shift+Space gives \, on my system (but check in the Source Pane).
Andrew
xdvi problem in lyx 2.1.2
I recently upgraded to lyx 2.1.2.
The following preamble worked fine until I did the upgrade.
* \usepackage{geometry}
* \newgeometry{top=.85in, bottom=.85in, left=1.30in, right=.65in}
* \setlength{\footskip}{15pt}\usepackage{fancyhdr}
* \usepackage{color}
* \lhead{\small{www.dedoimedo.com}}
* \rhead{\small{all rights reserved}}
* \date{}
* \usepackage{caption}
*
\captionsetup{labelfont=bf,format=plain,indention=0cm,justification=ragg
edright,singlelinecheck=false}
* \usepackage{enumitem}
* \usepackage[hang,splitrule]{footmisc}
* \addtolength{\footskip}{0.5cm}
* \setlength{\footnotemargin}{0.3cm}
* \setlength{\footnotesep}{0.4cm}
* \usepackage{multirow}
* \usepackage{rotating}
* \usepackage{listings}
* \renewcommand{\arraystretch}{2}
* \usepackage{watermark}
* %\usepackage{geometry}
* % \newgeometry{top=.85in, bottom=.85in, left=1.0in, right=1.0in}
* \usepackage{ulem}
*\usepackage{pstricks}
*
*
*
*
* % BEGIN left and right vertical lines, and line numbers.
*
* \usepackage{eso-pic}
* \usepackage{calc}
* \newlength{\leftruleA}
* \setlength{\leftruleA}{3.2\leftmargin-\marginparsep}
* \newlength{\leftruleB}
* \setlength{\leftruleB}{3.0\leftmargin-\marginparsep}
* \newlength{\rightrule}
* \setlength{\rightrule}{3.0\leftmargin+\textwidth+\marginparsep}
* \AddToShipoutPicture{%
* \put(\LenToUnit{\leftruleA},0){\rule{.5pt}{\paperheight-.5in}} %
First rule on the left
* \put(\LenToUnit{\leftruleB},0){\rule{.5pt}{\paperheight-.5in}} %
Second rule on the left
* \put(\LenToUnit{\rightrule},0){\rule{.5pt}{\paperheight-.5in}} %
Rule on the right
* \rput(1.6,13.74){
* \begin{minipage}[t]{20mm}
* \begin{flushright}
* \begin{doublespace}
*
1\\2\\3\\4\\5\\6\\7\\8\\9\\10\\11\\12\\13\\14\\15\\16\\17\\18\\19\\20\\21\\22\\23
\\24\\25\\26\\27\\28
* \end{doublespace}
* \end{flushright}
* \end{minipage}
* }
* }
*
*
* % END left and right vertical lines, and line numbers.
* \let\OrgIndex\index
*
* \renewcommand*{\index}[1]{\OrgIndex{#1}}
*
But now xdvik (cntrl-D) shows the line numbers starting half-way down the
page, rather than at the top of the page.
Lyx still prints fine. Its only the xdvi view that is screwed up.
Any suggestions?
Bibliography does not print after switching to biblatex
Dear Friends of LyX, I used bibtex in various documents with single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found "Using biblatex with LyX" in the wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step and can cite the references but the bibliography does not show in the LyX-text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under "Known problems" I did 'biber --cache' which resulted in: "No cache - you are not running the PAR: Packer executable of biber" What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536
Re: Enumerate changes spacing over 2 pages
On 2015-06-25, Mark Garrow wrote: > [-- Type: text/plain, Encoding: --] > I have an enumerated list under a section with a number of items that are > indented one level. The list begins towards the bottom of the page and > continues on the next page. The spacing on the list items on the second > page changes drastically from what appear to be 1 line to several lines. > I've attached a pdf of the 2 pages in question so it's easier to see what > I'm talking about. Any suggestions on how to remedy this would be greatly > appreciated. Typically this is caused by "stretching" space: TeX tries to get the same size for the text block both horizontally and vertically by a certain amount of variable inter-word space (horizontally) and inter-paragraph space (vertically). You could try to redefine \parset and \itemsep without variable space in the LaTeX preamble. Alternatively, you may try to "shrink" the text block on the second page via the "\raggedbottom" command (as ERT (i.e. LaTeX-box)) after the end of the list. Günter
Re: Bibliography does not print when using biblatex instead of bibtex
On 06/30/2015 11:19 AM, Michael Berger wrote: PS: as advised under "Known problems" I did 'biber --cache' which resulted in: "No cache - you are not running the PAR: Packer executable of biber" What might be the problem here? Do you have up-to-date versions of biblatex (3.0) and biber (2.1)? Johannes
Bibliography does not print when using biblatex instead of bibtex
Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found "Using biblatex with LyX" in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 PS: as advised under "Known problems" I did 'biber --cache' which resulted in: "No cache - you are not running the PAR: Packer executable of biber" What might be the problem here? Thanks and regards Michael Berger, Dipl. Ing. Im Borngrund 7a D-35606 Solms id...@online.de Fon: +49 6442 706509 Fax: 032121247536 Linux member
Re: Bibliography does not print when using biblatex instead of bibtex
On 06/30/2015 05:19 AM, Michael Berger wrote: Dear Friends of LyX, I used bibtex in various documentswith single and sectioned bibliographies and that worked without problems. Then I decided to try using biblatex on one of these documents and found "Using biblatex with LyX" in wiki.lyx.org/Bibtex/Biblatex. I followed this guide step by step but neither shows thebibliography in the text nor in PDf nor does it print. I am using: openSUSE 13.2, KDE LyX 2.1.2 my collection of references is managed in KBibTeX version 0.5.1 A minimal (non)working example would definitely help here: a short .lyx file and accompanying .bib. It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the recipe from the same wiki page.
Re: Bibliography does not print when using biblatex instead of bibtex
It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the
recipe from the same wiki page.
Attaching a working example, might help.
@BOOK{monroe:1955,
title = {{R}adio {O}n},
publisher = {Addison--Wesley},
year = {1955},
author = {Marilyn Monroe},
address = {Los Angeles, CA, USA}
}
MM-biblatex.lyx
Description: application/lyx
Re: Bibliography does not print when using biblatex instead of bibtex
It worked for me on Fedora Linux, biber 1.8 + biblatex 2.8a. I used the
recipe from the same wiki page.
Attaching a working example, might help.
@BOOK{monroe:1955,
title = {{R}adio {O}n},
publisher = {Addison--Wesley},
year = {1955},
author = {Marilyn Monroe},
address = {Los Angeles, CA, USA}
}
MM_biblatex.lyx
Description: application/lyx
