EB Garamond type
Hi all: How can I install in lyx-2.2.0 the EB Garamond typography, that it does not come installed by default?. I test some tips to include in the preamble of document, but do not work. Some idea Regards and thanks Miguel
Re: Question on installation of Lyx from distro and/or over internet
Hi Michael: TeXlive can work because each is in a different folder and you are the one you decide on your route which you work (/usr/local/texlive/2013 or 2016). I think that if you have installed an earlier version of lyx and install later, the lyx executable will be overwritten and the current work anymore. Regards Miguel from Spain On 14/07/16 06:05, Michael Berger wrote: Mageia5's software manager offers to install LyX 2.1 and if done will automatically install Texlive 2013 along with it. I decided to install the most recent versions available and found LyX 2.2 and Texlive 2016 that could be installed over the internet. Thinking of possible conflicts I removed Lyx 2.1 and Texlive2013 and then installed first Texlive2016 (as user) and then LyX 2.2 (as administrator). Meanwhile things are running as I want them to. Question: Would there have been a conflict without prior removal of the old versions? Or putting it the other way around: Would there be a conflict if installing these older versions again using Mageia's software manager and then have both versions installed? PS: I think there is an option to mark packages as "never install" or something. Thanks and cheers, Michael
Re: Updating TexLive2016
Hi Michael: You've tried to do it as root?. If the folder /usr does not have permissions will leave not write anything. I have the 2016 TexLive manager as root and have no problem. Regards Miguel from Spain On 11/07/16 10:30, Michael Berger wrote: Hi Kornel, hallo Jürgen, I have TL2016 installed and could call GUI in a user console. However, I could not edit, update etc. Then I reported
Re: install of Lyx 2.2 and texlive2016
Hi Michael: I download lyx-2.2.0.tar.gz of repository ftp.lyx.org As a user in konsole $tar zxvf lyx-2.2.0.tar.gz $cd lyx-2.2.0 $ ./configure As a root # make # make install In konsole as a user lyx Welcome to lyx !!! Regards Miguel On 20/06/16 08:28, Michael Berger wrote: Miguel, thanks for your advice. Are you using Mageia5 and have you Lyx 2.2 installed? If so may I ask you how you did this ? Michael from Germany On 06/20/2016 08:19 AM, Buenas Noticias wrote: Hi Michael: As I did not shall find the package, installed in text mode. Is perfectly valid. If you want to check it, go to the PAHT / usr / local / texlive / 2016 / x86_64 Reconfigure and work Greeting Miguel from Spain On 18/06/16 08:36, Michael Berger wrote: Hi Miguel, hi all I installed texlive2016 last night: # ./install-tl -gui (NOT ./install-tl-20160523 -gui) The installer did not find Perl/Tk but after giving some comments continued in text mode. After 49 minutes I was greeted 'Welcome!'. I presume texlive2016 will be fully functionally despite that missing gui. :-\ Please, could you or somebody else confirm my presumption before I proceed with installing LyX 2.2.0 etc. ?! Remains the question why your installation worked with -gui while mine did not!? I found perl-Tk (Tk modules for Perl), 804.33.0, 1.mga x86_64 is installed in my system. It is the only perl-Tk package installed out of the total number of 24. The Tex Maintainers say that GUI must be compiled with XFT support - did you do that?! In my software manager I see 'lib64xft-gir2.0' and 'lib64xft2' installed out of another 16 xft packages. I very much appreciate receiving comments on this issue :-* Thanks an best, Michael On 06/17/2016 03:09 PM, Buenas Noticias wrote: Hi Michael: Yes, Tools > Preferences > PATH Then reconfigure LyX and work. Miguel On 17/06/16 14:30, Michael Berger wrote: Hola Buenas Noticias y muchas muchas gracias! Your comment is very good news to me especially as it comes from a person using Mageia5 like I do. You basically did what I was planning. But then you also added some very interesting extras that I was not aware of and nobody before had mentioned. A have one single question though re 'Preferences-PATH'. Do you refer to the LyX Preferences Menu Tools > Preferences > Paths and then write into PATH prefix ? Of course I will revert to you after the work is done. However, I might come up with more questions if something should go wrong ;-) Michael On 06/17/2016 12:03 PM, Buenas Noticias wrote: Hi: I download the tarball install-tl-unx.tar.gz and: tar zxvf install-tl-unx.tar,gz cd install-tl-20160523 su pwd #./install-tl-20160523 -gui tlmgr is a a binary and shall open de interface to install. Then you install lyx-2.2.0 and in Preferences-PATH write /usr/local/texlive/2016/bin/x86_64-linux I have Mageia 5 and work fine Greetings On 17/06/16 10:58, Michael Berger wrote: Hi Scott, Kornel, I have now a clean and updated Mageia5 default installation on a separate HD (no Lyx, no texlive). My goal is to get Lyx 2.2.0 and texlive2016 running but I am not sure how to achieve that. This is my (very innocent) plan: - first install texlive2016 using 'install-tl-unx.tar.gz' from https://www.tug.org/texlive/acquire-netinstall.html - then install Lyx 2.2.0 from http://www.lyx/org/download Is this the right way to do? If so, please also advise what else needs to be observed/added/done etc. Thanks and cheers, Michael PS: I just learned that Mageia6 will still come with texlive2013
Re: install of Lyx 2.2 and texlive2016
Hi Michael: As I did not shall find the package, installed in text mode. Is perfectly valid. If you want to check it, go to the PAHT / usr / local / texlive / 2016 / x86_64 Reconfigure and work Greeting Miguel from Spain On 18/06/16 08:36, Michael Berger wrote: Hi Miguel, hi all I installed texlive2016 last night: # ./install-tl -gui (NOT ./install-tl-20160523 -gui) The installer did not find Perl/Tk but after giving some comments continued in text mode. After 49 minutes I was greeted 'Welcome!'. I presume texlive2016 will be fully functionally despite that missing gui. :-\ Please, could you or somebody else confirm my presumption before I proceed with installing LyX 2.2.0 etc. ?! Remains the question why your installation worked with -gui while mine did not!? I found perl-Tk (Tk modules for Perl), 804.33.0, 1.mga x86_64 is installed in my system. It is the only perl-Tk package installed out of the total number of 24. The Tex Maintainers say that GUI must be compiled with XFT support - did you do that?! In my software manager I see 'lib64xft-gir2.0' and 'lib64xft2' installed out of another 16 xft packages. I very much appreciate receiving comments on this issue :-* Thanks an best, Michael On 06/17/2016 03:09 PM, Buenas Noticias wrote: Hi Michael: Yes, Tools > Preferences > PATH Then reconfigure LyX and work. Miguel On 17/06/16 14:30, Michael Berger wrote: Hola Buenas Noticias y muchas muchas gracias! Your comment is very good news to me especially as it comes from a person using Mageia5 like I do. You basically did what I was planning. But then you also added some very interesting extras that I was not aware of and nobody before had mentioned. A have one single question though re 'Preferences-PATH'. Do you refer to the LyX Preferences Menu Tools > Preferences > Paths and then write into PATH prefix ? Of course I will revert to you after the work is done. However, I might come up with more questions if something should go wrong ;-) Michael On 06/17/2016 12:03 PM, Buenas Noticias wrote: Hi: I download the tarball install-tl-unx.tar.gz and: tar zxvf install-tl-unx.tar,gz cd install-tl-20160523 su pwd #./install-tl-20160523 -gui tlmgr is a a binary and shall open de interface to install. Then you install lyx-2.2.0 and in Preferences-PATH write /usr/local/texlive/2016/bin/x86_64-linux I have Mageia 5 and work fine Greetings On 17/06/16 10:58, Michael Berger wrote: Hi Scott, Kornel, I have now a clean and updated Mageia5 default installation on a separate HD (no Lyx, no texlive). My goal is to get Lyx 2.2.0 and texlive2016 running but I am not sure how to achieve that. This is my (very innocent) plan: - first install texlive2016 using 'install-tl-unx.tar.gz' from https://www.tug.org/texlive/acquire-netinstall.html - then install Lyx 2.2.0 from http://www.lyx/org/download Is this the right way to do? If so, please also advise what else needs to be observed/added/done etc. Thanks and cheers, Michael PS: I just learned that Mageia6 will still come with texlive2013
Re: install of Lyx 2.2 and texlive2016
Hi Michael: Yes, Tools > Preferences > PATH Then reconfigure LyX and work. Miguel On 17/06/16 14:30, Michael Berger wrote: Hola Buenas Noticias y muchas muchas gracias! Your comment is very good news to me especially as it comes from a person using Mageia5 like I do. You basically did what I was planning. But then you also added some very interesting extras that I was not aware of and nobody before had mentioned. A have one single question though re 'Preferences-PATH'. Do you refer to the LyX Preferences Menu Tools > Preferences > Paths and then write into PATH prefix ? Of course I will revert to you after the work is done. However, I might come up with more questions if something should go wrong ;-) Michael On 06/17/2016 12:03 PM, Buenas Noticias wrote: Hi: I download the tarball install-tl-unx.tar.gz and: tar zxvf install-tl-unx.tar,gz cd install-tl-20160523 su pwd #./install-tl-20160523 -gui tlmgr is a a binary and shall open de interface to install. Then you install lyx-2.2.0 and in Preferences-PATH write /usr/local/texlive/2016/bin/x86_64-linux I have Mageia 5 and work fine Greetings On 17/06/16 10:58, Michael Berger wrote: Hi Scott, Kornel, I have now a clean and updated Mageia5 default installation on a separate HD (no Lyx, no texlive). My goal is to get Lyx 2.2.0 and texlive2016 running but I am not sure how to achieve that. This is my (very innocent) plan: - first install texlive2016 using 'install-tl-unx.tar.gz' from https://www.tug.org/texlive/acquire-netinstall.html - then install Lyx 2.2.0 from http://www.lyx/org/download Is this the right way to do? If so, please also advise what else needs to be observed/added/done etc. Thanks and cheers, Michael PS: I just learned that Mageia6 will still come with texlive2013
Re: install of Lyx 2.2 and texlive2016
Hi: I download the tarball install-tl-unx.tar.gz and: tar zxvf install-tl-unx.tar,gz cd install-tl-20160523 su pwd #./install-tl-20160523 -gui tlmgr is a a binary and shall open de interface to install. Then you install lyx-2.2.0 and in Preferences-PATH write /usr/local/texlive/2016/bin/x86_64-linux I have Mageia 5 and work fine Greetings On 17/06/16 10:58, Michael Berger wrote: Hi Scott, Kornel, I have now a clean and updated Mageia5 default installation on a separate HD (no Lyx, no texlive). My goal is to get Lyx 2.2.0 and texlive2016 running but I am not sure how to achieve that. This is my (very innocent) plan: - first install texlive2016 using 'install-tl-unx.tar.gz' from https://www.tug.org/texlive/acquire-netinstall.html - then install Lyx 2.2.0 from http://www.lyx/org/download Is this the right way to do? If so, please also advise what else needs to be observed/added/done etc. Thanks and cheers, Michael PS: I just learned that Mageia6 will still come with texlive2013
Re: how to instal the Texlive Manager from 'texlive2016-20160523.iso'
On 13/06/16 08:22, Buenas Noticias wrote: Hi: I download the tarball install-tl-unx.tar.gz and: tar zxvf install-tl-unx.tar,gz cd install-tl-20160523 su pwd #./install-tl-20160523 -gui tlmgr is a a binary and shall open de interface to install. You must unistall the 2015 version. Greetings Miguel from Spain On 11/06/16 21:56, UD wrote: This is great! Do you know if it will work in Lubuntu (the light-weight flavor of Ubuntu)? Thanks, Ehud Kaplan On 06/11/2016 08:14 PM, Scott Kostyshak wrote: On Sat, Jun 11, 2016 at 08:17:35AM +0200, Michael Berger wrote: Dear experts, I am a heavy user of LyX under Mageia5 which has all the normal TexLive stuff but does not provide tlmgr, TeX Live's package and configuration manager. What I am facing now is this 2.9 GiB 'texlive2016-20160523.iso - Ark' monster in /Home/Downloads. After reading all the documentation that came along plus some info from the internet I am more confused than ever and just do not know how to install tlmgr on my system. Who would be so kind as to advise me (a person of blessed ignorance in this field) how to do that!? I prepared a fresh install of Mageia5 on a separate HD that could be used without damaging my system and data. Thanks and cheers, Michael Hi Michael, If you want tlmgr my guess is you will have to install TeX Live manually, using install-tl. See here: https://www.tug.org/texlive/quickinstall.html If you have trouble, the tex-live mailing list is very helpful: http://lists.tug.org/tex-live I have a script that automates everything and makes things easy, but it only works on Ubuntu. I think it would take a lot of work to adapt it to Mageia5 but just in case you want to see how something in particular is done, it is here: https://github.com/scottkosty/install-tl-ubuntu Best, Scott --
Information
Hi all : When I was working with 2.1.0beta2 through git, appeared Typesetting: Default, and position of each letter, paragraph, border, etc... in the frontend of Lyx, under command buffer. Now I have 2.1.0 and no longer appears. How I can make that information appear? Thanks advanced Miguel
Error export DVI
Hi all : I have compiled and installed the test version 2.1.0beta2, and still gives me the same error that 2.1.0beta1: I cannot print to printer or file, the message is : The printer is not connected. The error that give the mini-buffer of lyx is: Error when exporting to DVI. This problem does not occur in version 2.0.6, and on the same computer and enviroment. Thanks advanced Miguel
Lyx 2.1.0beta1 don't print
Hi all : When you send a document to the printer or file, do not print and gives me the error: Error exporting to DVI. If I export the document without printing, DVI works fine. In version 2.0.6 everything worked fine. The printer is properly installed My OS is Mandriva 2011 Linux Someone idea ? Regards Miguel