Footnote in box with page-breaks
Dear all, I use LyX 2.1 to write my PhD-thesis. I have a multipage box in my introduction, where I would like to add a footnote, but to no avail. Specifically, while the footnote nr is added, the actual footnote is not shown in the pdf. This behavior is specific for boxes where a page-break is allowed and is not dependent on the actual page-break (i.e., also in small boxes this problem occurs when page-break is enabled). In other boxes, footnotes do work. Do I do something wrong here, or is this a bug? And does anyone know how I can solve it? Thanks a lot in advance, best, Frank
Multipage box with caption
Dear all, I am writing my PhD-thesis in LyX 2.1 and use a multipage box in my introduction. I would like to add a caption to the box. I know that normally can be done by putting a float around it, but as it is a multipage box, this is not possible. Does someone have an idea what I could do to get a caption to a multipage box? Thanks a lot in advance, best, Frank
Footnote in box with page-breaks
Dear all, I use LyX 2.1 to write my PhD-thesis. I have a multipage box in my introduction, where I would like to add a footnote, but to no avail. Specifically, while the footnote nr is added, the actual footnote is not shown in the pdf. This behavior is specific for boxes where a page-break is allowed and is not dependent on the actual page-break (i.e., also in small boxes this problem occurs when page-break is enabled). In other boxes, footnotes do work. Do I do something wrong here, or is this a bug? And does anyone know how I can solve it? Thanks a lot in advance, best, Frank
Multipage box with caption
Dear all, I am writing my PhD-thesis in LyX 2.1 and use a multipage box in my introduction. I would like to add a caption to the box. I know that normally can be done by putting a float around it, but as it is a multipage box, this is not possible. Does someone have an idea what I could do to get a caption to a multipage box? Thanks a lot in advance, best, Frank
Footnote in box with page-breaks
Dear all, I use LyX 2.1 to write my PhD-thesis. I have a multipage box in my introduction, where I would like to add a footnote, but to no avail. Specifically, while the footnote nr is added, the actual footnote is not shown in the pdf. This behavior is specific for boxes where a page-break is allowed and is not dependent on the actual page-break (i.e., also in small boxes this problem occurs when page-break is enabled). In other boxes, footnotes do work. Do I do something wrong here, or is this a bug? And does anyone know how I can solve it? Thanks a lot in advance, best, Frank
Multipage box with caption
Dear all, I am writing my PhD-thesis in LyX 2.1 and use a multipage box in my introduction. I would like to add a caption to the box. I know that normally can be done by putting a float around it, but as it is a multipage box, this is not possible. Does someone have an idea what I could do to get a caption to a multipage box? Thanks a lot in advance, best, Frank
Re: Figure float in multipage box
Jürgen Spitzmüller spitz at lyx.org writes: Frank Leone wrote: Dear all, I am writing down my PhD dissertation and would like: - A box - Multipage - With a figure float in there I almost succeeded, using a frameless multipage box, but when I insert a figure float inside the box I get: ! LaTeX Error: Not in outer par mode. This is true both in 2.0 and 2.1. When I use a figure wrap float environment, it however does work! But then it wraps, which I don't want it to do. Does anyone have an idea: - Whether this is intended behavior? - And how I can fix it/work around it? Thanks a lot in advance, I appreciate it, best, Frank Maybe this helps: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=ouparmd Regards, Jürgen Thanks a lot for the answer, Jürgen, that indeed explains the problem. However, I don't get why Figure wrap float does work, even though it is also a float. And the solution suggested on the website regrettably does not help in my case: I can't switch the box and figure, as I need the lines of the box to include the figure and, more importantly, the box float is (if I understand correctly) the only multi-page float. Is there a way to make the figure wrap float non-wrappable, i.e., to have no text at the side(s)? Thanks again! best, Frank
Re: Figure float in multipage box
Jürgen Spitzmüller spitz at lyx.org writes: Frank Leone wrote: Dear all, I am writing down my PhD dissertation and would like: - A box - Multipage - With a figure float in there I almost succeeded, using a frameless multipage box, but when I insert a figure float inside the box I get: ! LaTeX Error: Not in outer par mode. This is true both in 2.0 and 2.1. When I use a figure wrap float environment, it however does work! But then it wraps, which I don't want it to do. Does anyone have an idea: - Whether this is intended behavior? - And how I can fix it/work around it? Thanks a lot in advance, I appreciate it, best, Frank Maybe this helps: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=ouparmd Regards, Jürgen Thanks a lot for the answer, Jürgen, that indeed explains the problem. However, I don't get why Figure wrap float does work, even though it is also a float. And the solution suggested on the website regrettably does not help in my case: I can't switch the box and figure, as I need the lines of the box to include the figure and, more importantly, the box float is (if I understand correctly) the only multi-page float. Is there a way to make the figure wrap float non-wrappable, i.e., to have no text at the side(s)? Thanks again! best, Frank
Re: Figure float in multipage box
Jürgen Spitzmüller lyx.org> writes: > > Frank Leone wrote: > > Dear all, > > > > I am writing down my PhD dissertation and would like: > > > > - A box > > - Multipage > > - With a figure float in there > > > > I almost succeeded, using a frameless multipage box, but when I insert a > > figure float inside the box I get: > > > > ! LaTeX Error: Not in outer par mode. > > > > This is true both in 2.0 and 2.1. When I use a figure wrap float > > environment, it however does work! But then it wraps, which I don't want it > > to do. > > > > Does anyone have an idea: > > - Whether this is intended behavior? > > - And how I can fix it/work around it? > > > > Thanks a lot in advance, I appreciate it, > > > > best, > > > > Frank > > Maybe this helps: > http://www.tex.ac.uk/cgi-bin/texfaq2html?label=ouparmd > > Regards, > Jürgen > > Thanks a lot for the answer, Jürgen, that indeed explains the problem. However, I don't get why "Figure wrap float" does work, even though it is also a float. And the solution suggested on the website regrettably does not help in my case: I can't switch the box and figure, as I need the lines of the box to include the figure and, more importantly, the box float is (if I understand correctly) the only multi-page float. Is there a way to make the figure wrap float non-wrappable, i.e., to have no text at the side(s)? Thanks again! best, Frank
Re: how to add a caption to a Box inset?
Jürgen Spitzmüller juergen at spitzmueller.org writes: Am Donnerstag 10 Oktober 2013, 19:16:52 schrieb Frank Leone: Dear Jürgen and others, Thanks a lot for the boxfloat, it is exactly what I needed. Now I however want to have a figure float within the boxfloat. If I however try to do this, I get the error: LaTeX error: No counter 'subboxfloat' defined. How can I make sure he understand sub-boxes/sub-figures inside a boxfloat? Thanks a lot in advance! I am afraid this is a bug in LyX, Frank. I'll make sure this will be fixed for the next release. Jürgen Thanks a lot, Jürgen, in the new beta it indeed works! best, Frank
Re: how to add a caption to a Box inset?
Jürgen Spitzmüller juergen at spitzmueller.org writes: Am Donnerstag 10 Oktober 2013, 19:16:52 schrieb Frank Leone: Dear Jürgen and others, Thanks a lot for the boxfloat, it is exactly what I needed. Now I however want to have a figure float within the boxfloat. If I however try to do this, I get the error: LaTeX error: No counter 'subboxfloat' defined. How can I make sure he understand sub-boxes/sub-figures inside a boxfloat? Thanks a lot in advance! I am afraid this is a bug in LyX, Frank. I'll make sure this will be fixed for the next release. Jürgen Thanks a lot, Jürgen, in the new beta it indeed works! best, Frank
Re: how to add a caption to a Box inset?
Jürgen Spitzmüller spitzmueller.org> writes: > > Am Donnerstag 10 Oktober 2013, 19:16:52 schrieb Frank Leone: > > Dear Jürgen and others, > > > > Thanks a lot for the boxfloat, it is exactly what I needed. Now I however > > want to have a figure float within the boxfloat. If I however try to do > > this, I get the error: > > > > LaTeX error: No counter 'subboxfloat' defined. > > > > How can I make sure he understand sub-boxes/sub-figures inside a boxfloat? > > > > Thanks a lot in advance! > > I am afraid this is a bug in LyX, Frank. I'll make sure this will be fixed for > the next release. > > Jürgen > > Thanks a lot, Jürgen, in the new beta it indeed works! best, Frank
Figure float in multipage box
Dear all, I am writing down my PhD dissertation and would like: - A box - Multipage - With a figure float in there I almost succeeded, using a frameless multipage box, but when I insert a figure float inside the box I get: ! LaTeX Error: Not in outer par mode. This is true both in 2.0 and 2.1. When I use a figure wrap float environment, it however does work! But then it wraps, which I don't want it to do. Does anyone have an idea: - Whether this is intended behavior? - And how I can fix it/work around it? Thanks a lot in advance, I appreciate it, best, Frank
Figure float in multipage box
Dear all, I am writing down my PhD dissertation and would like: - A box - Multipage - With a figure float in there I almost succeeded, using a frameless multipage box, but when I insert a figure float inside the box I get: ! LaTeX Error: Not in outer par mode. This is true both in 2.0 and 2.1. When I use a figure wrap float environment, it however does work! But then it wraps, which I don't want it to do. Does anyone have an idea: - Whether this is intended behavior? - And how I can fix it/work around it? Thanks a lot in advance, I appreciate it, best, Frank
Figure float in multipage box
Dear all, I am writing down my PhD dissertation and would like: - A box - Multipage - With a figure float in there I almost succeeded, using a frameless multipage box, but when I insert a figure float inside the box I get: ! LaTeX Error: Not in outer par mode. This is true both in 2.0 and 2.1. When I use a figure wrap float environment, it however does work! But then it wraps, which I don't want it to do. Does anyone have an idea: - Whether this is intended behavior? - And how I can fix it/work around it? Thanks a lot in advance, I appreciate it, best, Frank
Re: Large figures with ContinuedFloat
Dear Helge, and others, I use boxfloat to create a box floating environment, which works really good. Now one of my boxes is larger than one page, so I would like it to continue. I found this post and tried the ERT trick (copying my entire float environment, insert \ContinuedFloat), but it doesn't help (nothing changes). I did include the the subfig package. Could you help me out how I can do this instead/what I do wrong? Thanks a lot in advance, best, Frank
Re: Large figures with ContinuedFloat
Dear Helge, and others, I use boxfloat to create a box floating environment, which works really good. Now one of my boxes is larger than one page, so I would like it to continue. I found this post and tried the ERT trick (copying my entire float environment, insert \ContinuedFloat), but it doesn't help (nothing changes). I did include the the subfig package. Could you help me out how I can do this instead/what I do wrong? Thanks a lot in advance, best, Frank
Re: Large figures with ContinuedFloat
Dear Helge, and others, I use boxfloat to create a box floating environment, which works really good. Now one of my boxes is larger than one page, so I would like it to continue. I found this post and tried the ERT trick (copying my entire float environment, insert \ContinuedFloat), but it doesn't help (nothing changes). I did include the the subfig package. Could you help me out how I can do this instead/what I do wrong? Thanks a lot in advance, best, Frank
Re: how to add a caption to a Box inset?
Justin Wood Justin.Wood at murdoch.edu.au writes: Jürgen,(all,)Nothing I try will make the content of this custom boxfloat honour paragraph spacing. For example, this hack (based on your original code) doesn't work, but if I use ERT to create a framedpar explicitly, it works fine. The only difference my novice eyes can see is the fact that boxfloat is of course a float, wrapped in the {float} package which is used to define the custom boxfloat type with a LyX module.\newenvironment{framedpar}{\begin{framed}% \setlength{\parskip} {20pt}% big number to test% \setlength{\parsep}{10pt} }%{\end{framed}}% end framedpar% Jurgen's Box Float mods\ at ifundefined{fs at boxed}{}% do nothing if not in use{% \usepackage{framed} \newcommand\floatc at simplerule[2]{\flushleft{\ at fs at cfont #1 #2}} \renewcommand\fs at boxed{% \def\ at fs at cfont{\bfseries}\let\ at fs at capt\floatc at simplerule \def\ at fs at pre{\begin{framedpar}}% \def\ at fs at post{\end{framedpar}}% \def\ at fs at mid{\kern8pt}% \let\ at fs at iftopcapt\iftrue}}%I'm now thinking there's something in the {float} module that prevents it? Is this something you've come across before?Thanks so much for your help (and patience!). ~:Justin Wood:~ PhD candidate, Energy Engineering school, Murdoch University On 16 September 2010 16:19, Justin Wood Justin.Wood at murdoch.edu.au wrote:2. separate paragraphs with blank line the same as LyX does for normal text; add blank line after Box caption too. Dear Jürgen and others, Thanks a lot for the boxfloat, it is exactly what I needed. Now I however want to have a figure float within the boxfloat. If I however try to do this, I get the error: LaTeX error: No counter 'subboxfloat' defined. How can I make sure he understand sub-boxes/sub-figures inside a boxfloat? Thanks a lot in advance! best, Frank
Re: how to add a caption to a Box inset?
Justin Wood Justin.Wood at murdoch.edu.au writes: Jürgen,(all,)Nothing I try will make the content of this custom boxfloat honour paragraph spacing. For example, this hack (based on your original code) doesn't work, but if I use ERT to create a framedpar explicitly, it works fine. The only difference my novice eyes can see is the fact that boxfloat is of course a float, wrapped in the {float} package which is used to define the custom boxfloat type with a LyX module.\newenvironment{framedpar}{\begin{framed}% \setlength{\parskip} {20pt}% big number to test% \setlength{\parsep}{10pt} }%{\end{framed}}% end framedpar% Jurgen's Box Float mods\ at ifundefined{fs at boxed}{}% do nothing if not in use{% \usepackage{framed} \newcommand\floatc at simplerule[2]{\flushleft{\ at fs at cfont #1 #2}} \renewcommand\fs at boxed{% \def\ at fs at cfont{\bfseries}\let\ at fs at capt\floatc at simplerule \def\ at fs at pre{\begin{framedpar}}% \def\ at fs at post{\end{framedpar}}% \def\ at fs at mid{\kern8pt}% \let\ at fs at iftopcapt\iftrue}}%I'm now thinking there's something in the {float} module that prevents it? Is this something you've come across before?Thanks so much for your help (and patience!). ~:Justin Wood:~ PhD candidate, Energy Engineering school, Murdoch University On 16 September 2010 16:19, Justin Wood Justin.Wood at murdoch.edu.au wrote:2. separate paragraphs with blank line the same as LyX does for normal text; add blank line after Box caption too. Dear Jürgen and others, Thanks a lot for the boxfloat, it is exactly what I needed. Now I however want to have a figure float within the boxfloat. If I however try to do this, I get the error: LaTeX error: No counter 'subboxfloat' defined. How can I make sure he understand sub-boxes/sub-figures inside a boxfloat? Thanks a lot in advance! best, Frank
Re: how to add a caption to a Box inset?
Justin Wood murdoch.edu.au> writes: > > Jürgen,(all,)Nothing I try will make the content of this custom boxfloat honour paragraph spacing. For example, this hack (based on your original code) doesn't work, but if I use ERT to create a framedpar explicitly, it works fine. The only difference my novice eyes can see is the fact that boxfloat is of course a float, wrapped in the {float} package which is used to define the custom boxfloat type with a LyX module.\newenvironment{framedpar}{\begin{framed}% \setlength{\parskip} {20pt}% big number to test% \setlength{\parsep}{10pt} }%{\end{framed}}% end framedpar% Jurgen's Box Float mods\ ifundefined{fs boxed}{}% do nothing if not in use{% \usepackage{framed} \newcommand\floatc simplerule[2]{\flushleft{\ fs cfont #1 #2}} \renewcommand\fs boxed{% \def\ fs cfont{\bfseries}\let\ fs capt\floatc simplerule \def\ fs pre{\begin{framedpar}}% \def\ fs post{\end{framedpar}}% \def\ fs mid{\kern8pt}% \let\ fs iftopcapt\iftrue}}%I'm now thinking there's something in the {float} module that prevents it? Is this something you've come across before?Thanks so much for your help (and patience!). > > > ~:Justin Wood:~ > PhD candidate, Energy & Engineering school, Murdoch University > > On 16 September 2010 16:19, Justin Wood murdoch.edu.au> wrote:2. separate paragraphs with blank line the same as LyX does for normal text; add blank line after Box caption too. > > > > Dear Jürgen and others, Thanks a lot for the boxfloat, it is exactly what I needed. Now I however want to have a figure float within the boxfloat. If I however try to do this, I get the error: LaTeX error: No counter 'subboxfloat' defined. How can I make sure he understand sub-boxes/sub-figures inside a boxfloat? Thanks a lot in advance! best, Frank