copy paste problem with klipper
Hi LyXers, have just installed SuSE 8.1 and KDE 3.0.5. Any copy and paste action makes Lyx (1.2.1) crash when klipper is running in the taskbar. This is resolved when klipper is stopped with right klick/quit. (not disabled) i have no more details for the moment, maybe klipper needs some settings tweeking for better cooperation with LyX. The versions: LyX: 1.2.1 Qt: 3.0.5 KDE: 3.0.5 Klipper: v0.9.2 Linux: 2.4.19-4GB SuSE: 8.1 Bye Peer
copy paste problem with klipper
Hi LyXers, have just installed SuSE 8.1 and KDE 3.0.5. Any copy and paste action makes Lyx (1.2.1) crash when klipper is running in the taskbar. This is resolved when klipper is stopped with right klick/quit. (not disabled) i have no more details for the moment, maybe klipper needs some settings tweeking for better cooperation with LyX. The versions: LyX: 1.2.1 Qt: 3.0.5 KDE: 3.0.5 Klipper: v0.9.2 Linux: 2.4.19-4GB SuSE: 8.1 Bye Peer
copy & paste problem with klipper
Hi LyXers, have just installed SuSE 8.1 and KDE 3.0.5. Any copy and paste action makes Lyx (1.2.1) crash when klipper is running in the taskbar. This is resolved when klipper is stopped with right klick/quit. (not disabled) i have no more details for the moment, maybe klipper needs some settings tweeking for better cooperation with LyX. The versions: LyX: 1.2.1 Qt: 3.0.5 KDE: 3.0.5 Klipper: v0.9.2 Linux: 2.4.19-4GB SuSE: 8.1 Bye Peer
Re: graphics conversion for preview
It is strange, same version - different behavior. Did I miss a switch? The bug was for TIF and XFIG files only ? My graphics files that are converted on each update are jpg's and png's - ps files are not converted. A tmp dir is created and kept after each LyX launch and the converted eps files are written there into the dir lyx_tmpbuf0. Everything stays there until they are removed after exiting LyX. So I still get all my jpg's and png's converted for each preview which of course takes very much longer than the required LaTeX run alone. Bye Peer On Tuesday 26 November 2002 11:52, you wrote: Strange as it may seem, I have the opposite problem: I often happen to change a figure (usually I use: insert wide figure Float, and inside: insert graphics), but my change isnt reflected in Ghostview, both by a preview postscript or by an update postscript: I have to exit and restart LyX! Seems strange and opposite to what you see. BTW I have 1.2.1 too. Bye Alessandro On Tuesday 26 November 2002 09:29, Peer Frank wrote: Hi ! LyX (1.2.1) is converting all the figures for each preview or update which is getting annoying for documents with plenty of figures. - isn't it possible to have this done only once (initial run or after any change on graphics files) and keep the converted files in a tmp directory ?
Re: graphics conversion for preview
It is strange, same version - different behavior. Did I miss a switch? The bug was for TIF and XFIG files only ? My graphics files that are converted on each update are jpg's and png's - ps files are not converted. A tmp dir is created and kept after each LyX launch and the converted eps files are written there into the dir lyx_tmpbuf0. Everything stays there until they are removed after exiting LyX. So I still get all my jpg's and png's converted for each preview which of course takes very much longer than the required LaTeX run alone. Bye Peer On Tuesday 26 November 2002 11:52, you wrote: Strange as it may seem, I have the opposite problem: I often happen to change a figure (usually I use: insert wide figure Float, and inside: insert graphics), but my change isnt reflected in Ghostview, both by a preview postscript or by an update postscript: I have to exit and restart LyX! Seems strange and opposite to what you see. BTW I have 1.2.1 too. Bye Alessandro On Tuesday 26 November 2002 09:29, Peer Frank wrote: Hi ! LyX (1.2.1) is converting all the figures for each preview or update which is getting annoying for documents with plenty of figures. - isn't it possible to have this done only once (initial run or after any change on graphics files) and keep the converted files in a tmp directory ?
Re: graphics conversion for preview
It is strange, same version - different behavior. Did I miss a switch? The bug was for TIF and XFIG files only ? My graphics files that are converted on each update are jpg's and png's - ps files are not converted. A tmp dir is created and kept after each LyX launch and the converted eps files are written there into the dir lyx_tmpbuf0. Everything stays there until they are removed after exiting LyX. So I still get all my jpg's and png's converted for each preview which of course takes very much longer than the required LaTeX run alone. Bye Peer On Tuesday 26 November 2002 11:52, you wrote: > Strange as it may seem, > I have the >opposite< problem: > I often happen to change a figure (usually I use: insert wide > figure Float, and inside: insert graphics), > but my change isnt reflected in Ghostview, both by a preview > postscript or by an update postscript: > I have to exit and restart LyX! > Seems strange and opposite to what you see. > BTW I have 1.2.1 too. > > Bye > > Alessandro > > On Tuesday 26 November 2002 09:29, Peer Frank wrote: > > Hi ! > > > > LyX (1.2.1) is converting all the figures for each preview or > > update which is getting annoying for documents with plenty of > > figures. > > > > - isn't it possible to have this done only once (initial run or > > after any change on graphics files) and keep the converted files > > in a tmp directory ?
graphics conversion for preview
Hi ! LyX (1.2.1) is converting all the figures for each preview or update which is getting annoying for documents with plenty of figures. - isn't it possible to have this done only once (initial run or after any change on graphics files) and keep the converted files in a tmp directory ? -- Peer
graphics conversion for preview
Hi ! LyX (1.2.1) is converting all the figures for each preview or update which is getting annoying for documents with plenty of figures. - isn't it possible to have this done only once (initial run or after any change on graphics files) and keep the converted files in a tmp directory ? -- Peer
graphics conversion for preview
Hi ! LyX (1.2.1) is converting all the figures for each preview or update which is getting annoying for documents with plenty of figures. - isn't it possible to have this done only once (initial run or after any change on graphics files) and keep the converted files in a tmp directory ? -- Peer
paper custom size zero margin dissapears
using LyX 1.2.1 (Aug 20) Hi folks, setting zero margins (e.g. top) for the document paper layout seem to vanish. It works once, but when the dialog is closed and reopened the entries have vanished and the 0 value is not used anymore and a default instead. A bug ? A workaround is to set a small non zero margin. Bye Peer
paper custom size zero margin dissapears
using LyX 1.2.1 (Aug 20) Hi folks, setting zero margins (e.g. top) for the document paper layout seem to vanish. It works once, but when the dialog is closed and reopened the entries have vanished and the 0 value is not used anymore and a default instead. A bug ? A workaround is to set a small non zero margin. Bye Peer
paper custom size zero margin dissapears
using LyX 1.2.1 (Aug 20) Hi folks, setting zero margins (e.g. top) for the document paper layout seem to vanish. It works once, but when the dialog is closed and reopened the entries have vanished and the 0 value is not used anymore and a default instead. A bug ? A workaround is to set a small non zero margin. Bye Peer
table running from left to right
Very nice !
And how do you turn this off again ?
On Mon, Aug 19, 2002 at 02:09:33PM -0500, Remzi Seker wrote:
I could not solve this on my own:
The tables should start from the left of the page and extend to the
right end
of the page. Regardless of whether a column is composed of one
character
entries.
Is there a simple way to do this? Or i have to edit every table one
by one to
define the column width?
In the preamble:
\renewenvironment{tabular}[1]
{\begin{tabular*}{\linewidth}{@{\extracolsep{\fill}}#1}}
{\end{tabular*}}
table running from left to right
Very nice !
And how do you turn this off again ?
On Mon, Aug 19, 2002 at 02:09:33PM -0500, Remzi Seker wrote:
I could not solve this on my own:
The tables should start from the left of the page and extend to the
right end
of the page. Regardless of whether a column is composed of one
character
entries.
Is there a simple way to do this? Or i have to edit every table one
by one to
define the column width?
In the preamble:
\renewenvironment{tabular}[1]
{\begin{tabular*}{\linewidth}{@{\extracolsep{\fill}}#1}}
{\end{tabular*}}
table running from left to right
Very nice !
And how do you turn this off again ?
>On Mon, Aug 19, 2002 at 02:09:33PM -0500, Remzi Seker wrote:
> I could not solve this on my own:
> The tables should start from the left of the page and extend to the
>right end
> of the page. Regardless of whether a column is composed of one
>character
> entries.
>
> Is there a simple way to do this? Or i have to edit every table one
>by one to
> define the column width?
>In the preamble:
> \renewenvironment{tabular}[1]
> {\begin{tabular*}{\linewidth}{@{\extracolsep{\fill}}#1}}
> {\end{tabular*}}
suggestion for style selector
Hi Lyx ! Little annoying detail: The style selector where one chooses standard, itemize, section etc. has more entries than the length of the list. Often one has to scroll prior to be able to choose the style. IMHO I think the list could be made long enough to generally avoid scrolling and still fit in the window. Besides that work is just great fun with LyX Bye Peer
suggestion for style selector
Hi Lyx ! Little annoying detail: The style selector where one chooses standard, itemize, section etc. has more entries than the length of the list. Often one has to scroll prior to be able to choose the style. IMHO I think the list could be made long enough to generally avoid scrolling and still fit in the window. Besides that work is just great fun with LyX Bye Peer
suggestion for style selector
Hi Lyx ! Little annoying detail: The style selector where one chooses standard, itemize, section etc. has more entries than the length of the list. Often one has to scroll prior to be able to choose the style. IMHO I think the list could be made long enough to generally avoid scrolling and still fit in the window. Besides that work is just great fun with LyX Bye Peer
usepackage bookman for Euro
Hi Lyxers:
I'm trying to use the Euro symbol, the nice one.
So I put \usepackage{eurofont} and \usepackage{bookman} into the
preamble. But what to do with bookman.sty ?
Usage of \euro produces the attached error message.
Bookman font is available in Layout/document/fonts.
And many *tfm fonts are in /usr/share/texmf/fonts/tfm/adobe/bookman/ .
Thanx in advance
Peer
snapshot1.png
Description: PNG image
Re: usepackage bookman for Euro
This helped to get the Euro: http://www.mail-archive.com/lyx-users@lists.lyx.org/msg15521.html Thanks Peer
usepackage bookman for Euro
Hi Lyxers:
I'm trying to use the Euro symbol, the nice one.
So I put \usepackage{eurofont} and \usepackage{bookman} into the
preamble. But what to do with bookman.sty ?
Usage of \euro produces the attached error message.
Bookman font is available in Layout/document/fonts.
And many *tfm fonts are in /usr/share/texmf/fonts/tfm/adobe/bookman/ .
Thanx in advance
Peer
snapshot1.png
Description: PNG image
Re: usepackage bookman for Euro
This helped to get the Euro: http://www.mail-archive.com/lyx-users@lists.lyx.org/msg15521.html Thanks Peer
usepackage bookman for Euro
Hi Lyxers:
I'm trying to use the Euro symbol, the nice one.
So I put \usepackage{eurofont} and \usepackage{bookman} into the
preamble. But what to do with bookman.sty ?
Usage of \euro produces the attached error message.
Bookman font is available in Layout/document/fonts.
And many *tfm fonts are in /usr/share/texmf/fonts/tfm/adobe/bookman/ .
Thanx in advance
Peer
snapshot1.png
Description: PNG image
Re: usepackage bookman for Euro
This helped to get the Euro: http://www.mail-archive.com/lyx-users@lists.lyx.org/msg15521.html Thanks Peer
fancy style: switch off header but not footer on first page
Hi Lyxers:
On the first page of a letter using fancyhdr I'd like to switch off
the header but not the footer. Both have to appear on page 2ff.
\thispagestyle{plain} switches off both. Any hint ?
Peer
fancy style: switch off header but not footer on first page
Hi Lyxers:
On the first page of a letter using fancyhdr I'd like to switch off
the header but not the footer. Both have to appear on page 2ff.
\thispagestyle{plain} switches off both. Any hint ?
Peer
fancy style: switch off header but not footer on first page
Hi Lyxers:
On the first page of a letter using fancyhdr I'd like to switch off
the header but not the footer. Both have to appear on page 2ff.
\thispagestyle{plain} switches off both. Any hint ?
Peer
long view of digest messages with kmail
Hi: Not really a LyX question, but anyway: I did not get kmail to display the messages of the daily digest, even with smart or inlined attachments activated, only the icons and message number are listed and have to be klicked, very annoying because one has to memorize the message number to klick open each subject of interest one by one (while Netscape messenger lists all messages in full length and detail). Did anybody find a solution for this ? Thanks Peer
long view of digest messages with kmail
Hi: Not really a LyX question, but anyway: I did not get kmail to display the messages of the daily digest, even with smart or inlined attachments activated, only the icons and message number are listed and have to be klicked, very annoying because one has to memorize the message number to klick open each subject of interest one by one (while Netscape messenger lists all messages in full length and detail). Did anybody find a solution for this ? Thanks Peer
"long view" of digest messages with kmail
Hi: Not really a LyX question, but anyway: I did not get kmail to display the messages of the daily digest, even with smart or inlined attachments activated, only the icons and message number are listed and have to be klicked, very annoying because one has to memorize the message number to klick open each subject of interest one by one (while Netscape messenger lists all messages in full length and detail). Did anybody find a solution for this ? Thanks Peer
table float with caption at the bottom
Hi Lyxers,
Inserting table floats with the caption below the table does not work as in
previous versions (before 1.1.6 fix2), I don't get it to work at all:
insert - floats - table floats
then write mycaptiontext, then insert table between Table: and
mycaptiontext
produces the following error:
Paragraph ended before \@caption was complete.
\end{tabular} mycaptiontext} ...
My mistake or a bug ?
Bye !
Peer
--
Dr. Peer Frank
Skytec
Fuggerweg 19
D-86874 Mattsies (Germany)
phone: +49-8268-732
mail: [EMAIL PROTECTED]
web: www.skytec-engineering.de
Re: table float with caption at the bottom
On Friday 08 June 2001 10:41, Herbert Voss wrote:
On Fri, 8 Jun 2001, Peer Frank wrote:
Inserting table floats with the caption below the table does not work as
in previous versions (before 1.1.6 fix2), I don't get it to work at all:
insert - floats - table floats
then write mycaptiontext, then insert table between Table: and
mycaptiontext
produces the following error:
Paragraph ended before \@caption was complete.
\end{tabular} mycaptiontext} ...
did you hit enter before inserting the table?
Herbert
Well, no, but it helps a lot !!
Thanks !
Peer
table float with caption at the bottom
Hi Lyxers,
Inserting table floats with the caption below the table does not work as in
previous versions (before 1.1.6 fix2), I don't get it to work at all:
insert - floats - table floats
then write mycaptiontext, then insert table between Table: and
mycaptiontext
produces the following error:
Paragraph ended before \@caption was complete.
\end{tabular} mycaptiontext} ...
My mistake or a bug ?
Bye !
Peer
--
Dr. Peer Frank
Skytec
Fuggerweg 19
D-86874 Mattsies (Germany)
phone: +49-8268-732
mail: [EMAIL PROTECTED]
web: www.skytec-engineering.de
Re: table float with caption at the bottom
On Friday 08 June 2001 10:41, Herbert Voss wrote:
On Fri, 8 Jun 2001, Peer Frank wrote:
Inserting table floats with the caption below the table does not work as
in previous versions (before 1.1.6 fix2), I don't get it to work at all:
insert - floats - table floats
then write mycaptiontext, then insert table between Table: and
mycaptiontext
produces the following error:
Paragraph ended before \@caption was complete.
\end{tabular} mycaptiontext} ...
did you hit enter before inserting the table?
Herbert
Well, no, but it helps a lot !!
Thanks !
Peer
table float with caption at the bottom
Hi Lyxers,
Inserting table floats with the caption below the table does not work as in
previous versions (before 1.1.6 fix2), I don't get it to work at all:
insert -> floats -> table floats
then write mycaptiontext, then insert table between "Table:" and
mycaptiontext
produces the following error:
Paragraph ended before \@caption was complete.
\end{tabular} mycaptiontext} ...
My mistake or a bug ?
Bye !
Peer
--
Dr. Peer Frank
Skytec
Fuggerweg 19
D-86874 Mattsies (Germany)
phone: +49-8268-732
mail: [EMAIL PROTECTED]
web: www.skytec-engineering.de
Re: table float with caption at the bottom
On Friday 08 June 2001 10:41, Herbert Voss wrote:
> On Fri, 8 Jun 2001, Peer Frank wrote:
> > Inserting table floats with the caption below the table does not work as
> > in previous versions (before 1.1.6 fix2), I don't get it to work at all:
> >
> > insert -> floats -> table floats
> > then write mycaptiontext, then insert table between "Table:" and
> > mycaptiontext
> >
> > produces the following error:
> >
> > Paragraph ended before \@caption was complete.
> > \end{tabular} mycaptiontext} ...
>
> did you hit enter before inserting the table?
>
> Herbert
Well, no, but it helps a lot !!
Thanks !
Peer
Re: LyX 1.1.6. does not launch on OSF
Jean-Marc Lasgouttes wrote: "Peer" == Peer Frank [EMAIL PROTECTED] writes: Peer This is another interesting thread: I don't use --prefix. Should Peer I ? How ? (was not necessary so far) How did you install in your local directory? Are you running LyX without installing first? The idea of prefix is to do configure --prefix=~/my-lyx and, with "make install", LyX will be installed in ~/my-lyx/bin/lyx ~/my-lyx/share/lyx/[lib files] ~/my-lyx/man/man1/lyx.1 etc. Default value of --prefix is /usr/local. Note that you should recompile completely LyX (at least to "rm src/*main.o" before compiling) if you change the prefix. JMarc Yep, that was it, but only after also setting setenv LYX_DIR_11x ~/lyx-1.1.6/lib By the way, no man (~/my-lyx/man) and no lib files, only the locale files were installed in ~/my-lyx/share. Phew, thanks a lot to all of you !!! Peer
Re: LyX 1.1.6. does not launch on OSF
Jean-Marc Lasgouttes wrote: "Peer" == Peer Frank [EMAIL PROTECTED] writes: Peer This is another interesting thread: I don't use --prefix. Should Peer I ? How ? (was not necessary so far) How did you install in your local directory? Are you running LyX without installing first? The idea of prefix is to do configure --prefix=~/my-lyx and, with "make install", LyX will be installed in ~/my-lyx/bin/lyx ~/my-lyx/share/lyx/[lib files] ~/my-lyx/man/man1/lyx.1 etc. Default value of --prefix is /usr/local. Note that you should recompile completely LyX (at least to "rm src/*main.o" before compiling) if you change the prefix. JMarc Yep, that was it, but only after also setting setenv LYX_DIR_11x ~/lyx-1.1.6/lib By the way, no man (~/my-lyx/man) and no lib files, only the locale files were installed in ~/my-lyx/share. Phew, thanks a lot to all of you !!! Peer
Re: LyX 1.1.6. does not launch on OSF
Jean-Marc Lasgouttes wrote: > > >>>>> "Peer" == Peer Frank <[EMAIL PROTECTED]> writes: > > Peer> This is another interesting thread: I don't use --prefix. Should > Peer> I ? How ? (was not necessary so far) > > How did you install in your local directory? Are you running LyX > without installing first? > > The idea of prefix is to do > configure --prefix=~/my-lyx > > and, with "make install", LyX will be installed in > ~/my-lyx/bin/lyx > ~/my-lyx/share/lyx/[lib files] > ~/my-lyx/man/man1/lyx.1 > etc. > > Default value of --prefix is /usr/local. > > Note that you should recompile completely LyX (at least to "rm > src/*main.o" before compiling) if you change the prefix. > > JMarc Yep, that was it, but only after also setting setenv LYX_DIR_11x ~/lyx-1.1.6/lib By the way, no man (~/my-lyx/man) and no lib files, only the locale files were installed in ~/my-lyx/share. Phew, thanks a lot to all of you !!! Peer
Re: LyX 1.1.6. does not launch on OSF
Salut jean-Marc ! Jean-Marc Lasgouttes wrote: "Peer" == Peer Frank [EMAIL PROTECTED] writes: Peer still/again trying to get the thing going. LyX is still unable Peer to start (with the former version ~./lyx dir removed); is any Peer other OSF user more lucky ? Are you sure you removed your former ~/.lyx directory?? Assuming your home directory is /Perfo/peer, the following line seems wrong: Absolutely sure. Found lyxrc.defaults in /Perfo/peer/.lyx/lyxrc.defaults Reading '/Perfo/peer/.lyx/lyxrc.defaults'... Note that 'make install' does not generate anything in .lyx/. you are right: ~./lyx is generated during the first launch of LyX if no ~.lyx is there. Again: ~.lyx removed, LyX started, .lyx (and its files) generated, LyX crashes with those messages: ... creating lyxrc.defaults LyX: Done! LyX: Unknown tag `\latex_command' [around line 6 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\relyx_command' [around line 7 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_ps_command' [around line 9 of file ~/.lyx/lyxrc.defaults] ... Unable to find icon `buffer-open' Unable to find icon `buffer-write' Unable to find icon `buffer-print' ... I am surprised that it eventually crashes, anyway. So am I ... As you see i'm not installing in usr/local but in my user dir. Could that be an explanation for some path confusion and not finding the icons ? Now i found that the new ~./lyx/lyxrc.default is exactly the same as the one generated by lyx_1.1.5fix2. Is that OK ? I also tried with the lyxrc.default that is contained in the ~/lyx-1.1.6/lib dir, this too could not be read. Have there been changes in the file format of lyxrc.default ? I have the feeling that it might be rather a read (source, compiler ?) than a file format or location problem (i use gcc version 2.95.1). Peer # This file has been automatically generated by LyX' lib/configure # script. It contains default settings that have been determined by # examining your system. PLEASE DO NOT MODIFY ANYTHING HERE! If you # want to customize LyX, make a copy of the file LYXDIR/lyxrc as # ~/.lyx/lyxrc and edit this file instead. Any setting in lyxrc will # override the values given here. \latex_command "latex" \relyx_command "reLyX" \ps_command "gs" \view_ps_command "gv -swap" \view_pspic_command "gv" \ascii_roff_command "tbl $$FName | nroff" \chktex_command "none" \spell_command "none" \fax_command "none" \print_spool_command "lp" \print_spool_printerprefix "-d " \font_encoding "T1"
Re: LyX 1.1.6. does not launch on OSF
Salut jean-Marc ! Jean-Marc Lasgouttes wrote: "Peer" == Peer Frank [EMAIL PROTECTED] writes: Peer still/again trying to get the thing going. LyX is still unable Peer to start (with the former version ~./lyx dir removed); is any Peer other OSF user more lucky ? Are you sure you removed your former ~/.lyx directory?? Assuming your home directory is /Perfo/peer, the following line seems wrong: Absolutely sure. Found lyxrc.defaults in /Perfo/peer/.lyx/lyxrc.defaults Reading '/Perfo/peer/.lyx/lyxrc.defaults'... Note that 'make install' does not generate anything in .lyx/. you are right: ~./lyx is generated during the first launch of LyX if no ~.lyx is there. Again: ~.lyx removed, LyX started, .lyx (and its files) generated, LyX crashes with those messages: ... creating lyxrc.defaults LyX: Done! LyX: Unknown tag `\latex_command' [around line 6 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\relyx_command' [around line 7 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_ps_command' [around line 9 of file ~/.lyx/lyxrc.defaults] ... Unable to find icon `buffer-open' Unable to find icon `buffer-write' Unable to find icon `buffer-print' ... I am surprised that it eventually crashes, anyway. So am I ... As you see i'm not installing in usr/local but in my user dir. Could that be an explanation for some path confusion and not finding the icons ? Now i found that the new ~./lyx/lyxrc.default is exactly the same as the one generated by lyx_1.1.5fix2. Is that OK ? I also tried with the lyxrc.default that is contained in the ~/lyx-1.1.6/lib dir, this too could not be read. Have there been changes in the file format of lyxrc.default ? I have the feeling that it might be rather a read (source, compiler ?) than a file format or location problem (i use gcc version 2.95.1). Peer # This file has been automatically generated by LyX' lib/configure # script. It contains default settings that have been determined by # examining your system. PLEASE DO NOT MODIFY ANYTHING HERE! If you # want to customize LyX, make a copy of the file LYXDIR/lyxrc as # ~/.lyx/lyxrc and edit this file instead. Any setting in lyxrc will # override the values given here. \latex_command "latex" \relyx_command "reLyX" \ps_command "gs" \view_ps_command "gv -swap" \view_pspic_command "gv" \ascii_roff_command "tbl $$FName | nroff" \chktex_command "none" \spell_command "none" \fax_command "none" \print_spool_command "lp" \print_spool_printerprefix "-d " \font_encoding "T1"
Re: LyX 1.1.6. does not launch on OSF
Salut jean-Marc ! Jean-Marc Lasgouttes wrote: > > >>>>> "Peer" == Peer Frank <[EMAIL PROTECTED]> writes: > > Peer> still/again trying to get the thing going. LyX is still unable > Peer> to start (with the former version ~./lyx dir removed); is any > Peer> other OSF user more lucky ? > > Are you sure you removed your former ~/.lyx directory?? Assuming your > home directory is /Perfo/peer, the following line seems wrong: Absolutely sure. > Found lyxrc.defaults in /Perfo/peer/.lyx/lyxrc.defaults > Reading '/Perfo/peer/.lyx/lyxrc.defaults'... > > Note that 'make install' does not generate anything in .lyx/. you are right: ~./lyx is generated during the first launch of LyX if no ~.lyx is there. Again: ~.lyx removed, LyX started, .lyx (and its files) generated, LyX crashes with those messages: ... creating lyxrc.defaults LyX: Done! LyX: Unknown tag `\latex_command' [around line 6 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\relyx_command' [around line 7 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_ps_command' [around line 9 of file ~/.lyx/lyxrc.defaults] ... Unable to find icon `buffer-open' Unable to find icon `buffer-write' Unable to find icon `buffer-print' ... > > I am surprised that it eventually crashes, anyway. So am I ... As you see i'm not installing in usr/local but in my user dir. Could that be an explanation for some path confusion and not finding the icons ? Now i found that the new ~./lyx/lyxrc.default is exactly the same as the one generated by lyx_1.1.5fix2. Is that OK ? I also tried with the lyxrc.default that is contained in the ~/lyx-1.1.6/lib dir, this too could not be read. Have there been changes in the file format of lyxrc.default ? I have the feeling that it might be rather a read (source, compiler ?) than a file format or location problem (i use gcc version 2.95.1). Peer # This file has been automatically generated by LyX' lib/configure # script. It contains default settings that have been determined by # examining your system. PLEASE DO NOT MODIFY ANYTHING HERE! If you # want to customize LyX, make a copy of the file LYXDIR/lyxrc as # ~/.lyx/lyxrc and edit this file instead. Any setting in lyxrc will # override the values given here. \latex_command "latex" \relyx_command "reLyX" \ps_command "gs" \view_ps_command "gv -swap" \view_pspic_command "gv" \ascii_roff_command "tbl $$FName | nroff" \chktex_command "none" \spell_command "none" \fax_command "none" \print_spool_command "lp" \print_spool_printerprefix "-d " \font_encoding "T1"
Re: LyX 1.1.6. does not launch on OSF
Salut Alain: your suggestion sounds like the right remidy ... but it doesn't work here either. Although the --with-lyxname=STRING option is correctly recognized by configure, no "STRING" directory is created in ~/tex/share, see the result of the configure run. You wrote "renaming my old /usr/local/share/lyx directory solved the problem", renaming from which to which ? Configuration: Source code location: . C++ Compiler:g++ C++ Compiler flags: -g -O2 -fpermissive -fno-rtti -fno-exceptions C Compiler:gcc C Compiler flags: -g -O2 LyX binary dir: /Perfo/peer/tex/bin LyX files dir: /Perfo/peer/tex/share/lyxnew --- looks right, but this dir is not created Special flags: frontend-xforms included-string included-libsigc i keep trying... :-( peer Alain Castera wrote: Hi I got a similar behavior on my PPC . The problem was not with the ~/.lyx directory, but with the /usr/local/share/lyx directory. I configured LyX 1.1.6 with the --with-lyxname=STRING, and it creates a "STRING" directory in /usr/local/share, but seemed to use the "old" /usr/local/share/lyx dir when launched. Note that the application name was still lyx and not STRING. May be I missed the point ( and lost my "old" LyX binary). Anyway, renaming my old /usr/local/share/lyx directory solved the problem. Hope this could help you. Alain P.S. suggestion : Is it possible to suggest, in the INSTALL file, a COMPLETE procedure to install concurent versions of LyX (e.g. to test a new release before switching). This could help stupid users (like me) :-) *** *Alain Castera* * LPNHE - Tour 33 RdC | e-mail : [EMAIL PROTECTED]* * 4 Place Jussieu | Telephone : (+33) 144274187 * * 75252 Paris Cedex 05 | Fax : (+33) 144274638 * * France| * ******* On Fri, 19 Jan 2001, Peer Frank wrote: Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the former versions installation is it perhaps also neccessary to remove files in the ~/tex/share/lyx dir that might be forgotten my the installation script ? Peer
Re: LyX 1.1.6. does not launch on OSF
Salut Alain: your suggestion sounds like the right remidy ... but it doesn't work here either. Although the --with-lyxname=STRING option is correctly recognized by configure, no "STRING" directory is created in ~/tex/share, see the result of the configure run. You wrote "renaming my old /usr/local/share/lyx directory solved the problem", renaming from which to which ? Configuration: Source code location: . C++ Compiler:g++ C++ Compiler flags: -g -O2 -fpermissive -fno-rtti -fno-exceptions C Compiler:gcc C Compiler flags: -g -O2 LyX binary dir: /Perfo/peer/tex/bin LyX files dir: /Perfo/peer/tex/share/lyxnew --- looks right, but this dir is not created Special flags: frontend-xforms included-string included-libsigc i keep trying... :-( peer Alain Castera wrote: Hi I got a similar behavior on my PPC . The problem was not with the ~/.lyx directory, but with the /usr/local/share/lyx directory. I configured LyX 1.1.6 with the --with-lyxname=STRING, and it creates a "STRING" directory in /usr/local/share, but seemed to use the "old" /usr/local/share/lyx dir when launched. Note that the application name was still lyx and not STRING. May be I missed the point ( and lost my "old" LyX binary). Anyway, renaming my old /usr/local/share/lyx directory solved the problem. Hope this could help you. Alain P.S. suggestion : Is it possible to suggest, in the INSTALL file, a COMPLETE procedure to install concurent versions of LyX (e.g. to test a new release before switching). This could help stupid users (like me) :-) *** *Alain Castera* * LPNHE - Tour 33 RdC | e-mail : [EMAIL PROTECTED]* * 4 Place Jussieu | Telephone : (+33) 144274187 * * 75252 Paris Cedex 05 | Fax : (+33) 144274638 * * France| * ******* On Fri, 19 Jan 2001, Peer Frank wrote: Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the former versions installation is it perhaps also neccessary to remove files in the ~/tex/share/lyx dir that might be forgotten my the installation script ? Peer
Re: LyX 1.1.6. does not launch on OSF
Salut Alain: your suggestion sounds like the right remidy ... but it doesn't work here either. Although the --with-lyxname=STRING option is correctly recognized by configure, no "STRING" directory is created in ~/tex/share, see the result of the configure run. You wrote "renaming my old /usr/local/share/lyx directory solved the problem", renaming from which to which ? Configuration: Source code location: . C++ Compiler:g++ C++ Compiler flags: -g -O2 -fpermissive -fno-rtti -fno-exceptions C Compiler:gcc C Compiler flags: -g -O2 LyX binary dir: /Perfo/peer/tex/bin LyX files dir: /Perfo/peer/tex/share/lyxnew <--- looks right, but this dir is not created Special flags: frontend-xforms included-string included-libsigc i keep trying... :-( peer Alain Castera wrote: > > Hi > I got a similar behavior on my PPC . > > The problem was not with the ~/.lyx directory, but with the > /usr/local/share/lyx directory. I configured LyX 1.1.6 with the > --with-lyxname=STRING, and it creates a "STRING" directory in > /usr/local/share, but seemed to use the "old" /usr/local/share/lyx dir > when launched. Note that the application name was still lyx and not > STRING. > > May be I missed the point ( and lost my "old" LyX binary). Anyway, > renaming my old /usr/local/share/lyx directory solved the problem. > > Hope this could help you. > > Alain > P.S. suggestion : Is it possible to suggest, in the INSTALL file, a > COMPLETE procedure to install concurent versions of LyX (e.g. to test a > new release before switching). This could help stupid users (like me) :-) > > *** > *Alain Castera* > * LPNHE - Tour 33 RdC | e-mail : [EMAIL PROTECTED]* > * 4 Place Jussieu | Telephone : (+33) 144274187 * > * 75252 Paris Cedex 05 | Fax : (+33) 144274638 * > * France | * > *** > > On Fri, 19 Jan 2001, Peer Frank wrote: > > > Hi LyXers ! > > > > still/again trying to get the thing going. LyX is still unable to start > > (with the former version ~./lyx dir removed); is any other OSF user more > > lucky ? > > > > Now i tried the debug option, maybe this shows an obvious reason that > > jumps into the eye of some LyXexpert. > > > > Idea: unlike for the former versions installation is it perhaps also > > neccessary to remove files in the ~/tex/share/lyx dir that might be > > forgotten my the installation script ? > > > > Peer
LyX 1.1.6. does not launch on OSF
Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the former versions installation is it perhaps also neccessary to remove files in the ~/tex/share/lyx dir that might be forgotten my the installation script ? Peer lyx -dbg init Setting debug level to init Debugging `init' (Program initialisation) Initializing LyXGUI... Initializing LyXGUI...done Initializing LyX::init... Path of binary: /Perfo/peer/tex/bin/ Checking whether LyX is run in place... no System directory search path: /Perfo/peer/tex/share/l6/;/Perfo/share/l6/;/Perfo/peer/tex/share/lyx System directory: '/Perfo/peer/tex/share/lyx/' User LyX directory: '/Perfo/peer/.lyx/' DPI setting detected to be 113.662 About to read lyxrc.defaults... Found lyxrc.defaults in /Perfo/peer/.lyx/lyxrc.defaults Reading '/Perfo/peer/.lyx/lyxrc.defaults'... --- this is the one just generated by make install LyX: Unknown tag `\latex_command' [around line 6 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\relyx_command' [around line 7 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_ps_command' [around line 9 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_pspic_command' [around line 10 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\fax_command' [around line 14 of file ~/.lyx/lyxrc.defaults] About to read preferences... Could not find preferences About to read lyxrc... Could not find lyxrc About to read encodings... Could not find encodings About to read languages... Could not find languages Reading layouts... Reading '/Perfo/peer/tex/share/lyx/bind/cua.bind'... LyX: Unknown LyX function `buffer-view-ps' [around line 47 of file ~/tex/share/lyx/bind/cua.bind] LyX: Unknown LyX function `buffer-typeset' [around line 48 of file ~/tex/share/lyx/bind/cua.bind] LyX: Unknown LyX function `buffer-typeset-ps' [around line 49 of file ~/tex/share/lyx/bind/cua.bind] Reading '/Perfo/peer/tex/share/lyx/bind/menus.bind'... LyX: Unknown LyX function `buffer-view-ps' [around line 37 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-typeset' [around line 38 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-typeset-ps' [around line 39 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-fax' [around line 41 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-paper' [around line 83 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-table' [around line 84 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-quotes' [around line 85 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-itemize-bullets-select' [around line 94 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `table-insert' [around line 102 of file ~/tex/share/lyx/bind/menus.bind] Reading '/Perfo/peer/tex/share/lyx/bind/math.bind'... About to read default... Could not find default--- required ? who should write this ? LyX tmp dir: `/tmp/lyx_tmpdir11967aalvFa' Reading lastfiles `/Perfo/peer/.lyx/lastfiles'... Initializing LyX::init...done Initializing LyXView... Unable to find icon `buffer-open' Unable to find icon `buffer-write' Unable to find icon `buffer-print' Unable to find icon `cut' Unable to find icon `copy' Unable to find icon `paste' Unable to find icon `font-emph' Unable to find icon `font-noun' Unable to find icon `font-free' Unable to find icon `footnote-insert' Unable to find icon `marginpar-insert' Unable to find icon `depth-next' Unable to find icon `tex-mode' Unable to find icon `math-mode' Unable to find icon `figure-insert' Unable to find icon `dialog-tabular-insert' Initializing LyXFunc Initializing LyXView...done Initializing form_character::combox... Initializing form_character...done lyx: SIGSEGV signal caught Sorry, you have found a bug in LyX. If possible, please read 'Known bugs' under the Help menu and then send us a full bug report. Thanks! Bye. Abort process (core dumped) cd .lyx --- this is ~/.lyx as generated by make install /Perfo/peer/.lyx ls -l total 9 drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 bind/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 doc/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 kbd/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 layouts/ -rw-rw-r-- 1 peer Perfo673 Jan 19 08:39 lyxrc.defaults -rw-rw-r-- 1 peer Perfo117 Jan 19 08:39 packages.lst drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 reLyX/ drwxrwxr-x 2 peer
LyX 1.1.6. does not launch on OSF
Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the former versions installation is it perhaps also neccessary to remove files in the ~/tex/share/lyx dir that might be forgotten my the installation script ? Peer lyx -dbg init Setting debug level to init Debugging `init' (Program initialisation) Initializing LyXGUI... Initializing LyXGUI...done Initializing LyX::init... Path of binary: /Perfo/peer/tex/bin/ Checking whether LyX is run in place... no System directory search path: /Perfo/peer/tex/share/l6/;/Perfo/share/l6/;/Perfo/peer/tex/share/lyx System directory: '/Perfo/peer/tex/share/lyx/' User LyX directory: '/Perfo/peer/.lyx/' DPI setting detected to be 113.662 About to read lyxrc.defaults... Found lyxrc.defaults in /Perfo/peer/.lyx/lyxrc.defaults Reading '/Perfo/peer/.lyx/lyxrc.defaults'... --- this is the one just generated by make install LyX: Unknown tag `\latex_command' [around line 6 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\relyx_command' [around line 7 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_ps_command' [around line 9 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_pspic_command' [around line 10 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\fax_command' [around line 14 of file ~/.lyx/lyxrc.defaults] About to read preferences... Could not find preferences About to read lyxrc... Could not find lyxrc About to read encodings... Could not find encodings About to read languages... Could not find languages Reading layouts... Reading '/Perfo/peer/tex/share/lyx/bind/cua.bind'... LyX: Unknown LyX function `buffer-view-ps' [around line 47 of file ~/tex/share/lyx/bind/cua.bind] LyX: Unknown LyX function `buffer-typeset' [around line 48 of file ~/tex/share/lyx/bind/cua.bind] LyX: Unknown LyX function `buffer-typeset-ps' [around line 49 of file ~/tex/share/lyx/bind/cua.bind] Reading '/Perfo/peer/tex/share/lyx/bind/menus.bind'... LyX: Unknown LyX function `buffer-view-ps' [around line 37 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-typeset' [around line 38 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-typeset-ps' [around line 39 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-fax' [around line 41 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-paper' [around line 83 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-table' [around line 84 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-quotes' [around line 85 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-itemize-bullets-select' [around line 94 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `table-insert' [around line 102 of file ~/tex/share/lyx/bind/menus.bind] Reading '/Perfo/peer/tex/share/lyx/bind/math.bind'... About to read default... Could not find default--- required ? who should write this ? LyX tmp dir: `/tmp/lyx_tmpdir11967aalvFa' Reading lastfiles `/Perfo/peer/.lyx/lastfiles'... Initializing LyX::init...done Initializing LyXView... Unable to find icon `buffer-open' Unable to find icon `buffer-write' Unable to find icon `buffer-print' Unable to find icon `cut' Unable to find icon `copy' Unable to find icon `paste' Unable to find icon `font-emph' Unable to find icon `font-noun' Unable to find icon `font-free' Unable to find icon `footnote-insert' Unable to find icon `marginpar-insert' Unable to find icon `depth-next' Unable to find icon `tex-mode' Unable to find icon `math-mode' Unable to find icon `figure-insert' Unable to find icon `dialog-tabular-insert' Initializing LyXFunc Initializing LyXView...done Initializing form_character::combox... Initializing form_character...done lyx: SIGSEGV signal caught Sorry, you have found a bug in LyX. If possible, please read 'Known bugs' under the Help menu and then send us a full bug report. Thanks! Bye. Abort process (core dumped) cd .lyx --- this is ~/.lyx as generated by make install /Perfo/peer/.lyx ls -l total 9 drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 bind/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 doc/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 kbd/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 layouts/ -rw-rw-r-- 1 peer Perfo673 Jan 19 08:39 lyxrc.defaults -rw-rw-r-- 1 peer Perfo117 Jan 19 08:39 packages.lst drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 reLyX/ drwxrwxr-x 2 peer
LyX 1.1.6. does not launch on OSF
Hi LyXers ! still/again trying to get the thing going. LyX is still unable to start (with the former version ~./lyx dir removed); is any other OSF user more lucky ? Now i tried the debug option, maybe this shows an obvious reason that jumps into the eye of some LyXexpert. Idea: unlike for the former versions installation is it perhaps also neccessary to remove files in the ~/tex/share/lyx dir that might be forgotten my the installation script ? Peer > lyx -dbg init Setting debug level to init Debugging `init' (Program initialisation) Initializing LyXGUI... Initializing LyXGUI...done Initializing LyX::init... Path of binary: /Perfo/peer/tex/bin/ Checking whether LyX is run in place... no System directory search path: /Perfo/peer/tex/share/l6/;/Perfo/share/l6/;/Perfo/peer/tex/share/lyx System directory: '/Perfo/peer/tex/share/lyx/' User LyX directory: '/Perfo/peer/.lyx/' DPI setting detected to be 113.662 About to read lyxrc.defaults... Found lyxrc.defaults in /Perfo/peer/.lyx/lyxrc.defaults Reading '/Perfo/peer/.lyx/lyxrc.defaults'... <--- this is the one just generated by make install LyX: Unknown tag `\latex_command' [around line 6 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\relyx_command' [around line 7 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_ps_command' [around line 9 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\view_pspic_command' [around line 10 of file ~/.lyx/lyxrc.defaults] LyX: Unknown tag `\fax_command' [around line 14 of file ~/.lyx/lyxrc.defaults] About to read preferences... Could not find preferences About to read lyxrc... Could not find lyxrc About to read encodings... Could not find encodings About to read languages... Could not find languages Reading layouts... Reading '/Perfo/peer/tex/share/lyx/bind/cua.bind'... LyX: Unknown LyX function `buffer-view-ps' [around line 47 of file ~/tex/share/lyx/bind/cua.bind] LyX: Unknown LyX function `buffer-typeset' [around line 48 of file ~/tex/share/lyx/bind/cua.bind] LyX: Unknown LyX function `buffer-typeset-ps' [around line 49 of file ~/tex/share/lyx/bind/cua.bind] Reading '/Perfo/peer/tex/share/lyx/bind/menus.bind'... LyX: Unknown LyX function `buffer-view-ps' [around line 37 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-typeset' [around line 38 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-typeset-ps' [around line 39 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-fax' [around line 41 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-paper' [around line 83 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-table' [around line 84 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `layout-quotes' [around line 85 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `buffer-itemize-bullets-select' [around line 94 of file ~/tex/share/lyx/bind/menus.bind] LyX: Unknown LyX function `table-insert' [around line 102 of file ~/tex/share/lyx/bind/menus.bind] Reading '/Perfo/peer/tex/share/lyx/bind/math.bind'... About to read default... Could not find default<--- required ? who should write this ? LyX tmp dir: `/tmp/lyx_tmpdir11967aalvFa' Reading lastfiles `/Perfo/peer/.lyx/lastfiles'... Initializing LyX::init...done Initializing LyXView... Unable to find icon `buffer-open' Unable to find icon `buffer-write' Unable to find icon `buffer-print' Unable to find icon `cut' Unable to find icon `copy' Unable to find icon `paste' Unable to find icon `font-emph' Unable to find icon `font-noun' Unable to find icon `font-free' Unable to find icon `footnote-insert' Unable to find icon `marginpar-insert' Unable to find icon `depth-next' Unable to find icon `tex-mode' Unable to find icon `math-mode' Unable to find icon `figure-insert' Unable to find icon `dialog-tabular-insert' Initializing LyXFunc Initializing LyXView...done Initializing form_character::combox... Initializing form_character...done lyx: SIGSEGV signal caught Sorry, you have found a bug in LyX. If possible, please read 'Known bugs' under the Help menu and then send us a full bug report. Thanks! Bye. Abort process (core dumped) > cd .lyx > <--- >this is ~/.lyx as generated by make install /Perfo/peer/.lyx > ls -l total 9 drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 bind/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 doc/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 kbd/ drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 layouts/ -rw-rw-r-- 1 peer Perfo673 Jan 19 08:39 lyxrc.defaults -rw-rw-r-- 1 peer Perfo117 Jan 19 08:39 packages.lst drwxrwxr-x 2 peer Perfo512 Jan 19 08:39 reLyX/ drwxrwxr-x 2
LyX-1.1.6 compile OK, now first launch problem on OSF
Hi LyXers !
Allen's hint was the solution to the compiling problem. The make version
(that -apparently- worked fine for former releases) was not the right
one. Now with
GNU Make version 3.74 and
gcc version 2.95.1 19990816 (release)
but also using --with-included-string with ./configure, the compilation
was successfull.
BUT:
Now it seems unable to read the ~/.lyx/lyxrc.defaults it just created
before during the first run (i removed the former version ~/.lyx
directory).
???
I also tried to copy the lyxrc* files from ~/lyx-1.1.6/lib to the new
~./lyx directory, did not help. With no ~/.lyx directory LyX should run
and create this dir and create the files in it, and lyxrc will be
written later by selecting "preferences" (if one could - after a short
welcome LyX dies), right ?
Bye
Peer
PS: at least it runs under Linux: GREAT !
=== last part of output =
all the checkings...
+checking for package psnfss [times.sty]... yes
+Inspection done.
+Read the file doc/LaTeXConfig.lyx for more information.
creating textclass.lst
creating packages.lst
creating doc/LaTeXConfig.lyx
creating lyxrc.defaults
LyX: Done!
LyX: Unknown tag `\latex_command' [around line 6 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\relyx_command' [around line 7 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\view_ps_command' [around line 9 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\view_pspic_command' [around line 10 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\fax_command' [around line 14 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown LyX function `buffer-view-ps' [around line 47 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-typeset' [around line 48 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-typeset-ps' [around line 49 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-view-ps' [around line 37 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-typeset' [around line 38 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-typeset-ps' [around line 39 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-fax' [around line 41 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-paper' [around line 83 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-table' [around line 84 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-quotes' [around line 85 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-itemize-bullets-select' [around line
94 of file ~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `table-insert' [around line 102 of file
~/tex/share/lyx/bind/menus.bind]
Unable to find icon `buffer-open'
Unable to find icon `buffer-write'
Unable to find icon `buffer-print'
Unable to find icon `cut'
Unable to find icon `copy'
Unable to find icon `paste'
Unable to find icon `font-emph'
Unable to find icon `font-noun'
Unable to find icon `font-free'
Unable to find icon `footnote-insert'
Unable to find icon `marginpar-insert'
Unable to find icon `depth-next'
Unable to find icon `tex-mode'
Unable to find icon `math-mode'
Unable to find icon `figure-insert'
Unable to find icon `dialog-tabular-insert'
lyx: SIGSEGV signal caught
Sorry, you have found a bug in LyX. If possible, please read 'Known
bugs'
under the Help menu and then send us a full bug report. Thanks!
Bye.
Abort process (core dumped)
== lyxrc.default file as created by LyX during first launch
=
/Perfo/peer/.lyx
ls -l
total 9
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 bind/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:35 doc/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 kbd/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 layouts/
-rw-rw-r-- 1 peer Perfo673 Jan 16 11:35 lyxrc.defaults
-rw-rw-r-- 1 peer Perfo117 Jan 16 11:35 packages.lst
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 reLyX/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 templates/
-rw-rw-r-- 1 peer Perfo822 Jan 16 11:35 textclass.lst
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /Perfo/peer/tex
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir =
LyX-1.1.6 compile OK, now first launch problem on OSF
Hi LyXers !
Allen's hint was the solution to the compiling problem. The make version
(that -apparently- worked fine for former releases) was not the right
one. Now with
GNU Make version 3.74 and
gcc version 2.95.1 19990816 (release)
but also using --with-included-string with ./configure, the compilation
was successfull.
BUT:
Now it seems unable to read the ~/.lyx/lyxrc.defaults it just created
before during the first run (i removed the former version ~/.lyx
directory).
???
I also tried to copy the lyxrc* files from ~/lyx-1.1.6/lib to the new
~./lyx directory, did not help. With no ~/.lyx directory LyX should run
and create this dir and create the files in it, and lyxrc will be
written later by selecting "preferences" (if one could - after a short
welcome LyX dies), right ?
Bye
Peer
PS: at least it runs under Linux: GREAT !
=== last part of output =
all the checkings...
+checking for package psnfss [times.sty]... yes
+Inspection done.
+Read the file doc/LaTeXConfig.lyx for more information.
creating textclass.lst
creating packages.lst
creating doc/LaTeXConfig.lyx
creating lyxrc.defaults
LyX: Done!
LyX: Unknown tag `\latex_command' [around line 6 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\relyx_command' [around line 7 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\view_ps_command' [around line 9 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\view_pspic_command' [around line 10 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\fax_command' [around line 14 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown LyX function `buffer-view-ps' [around line 47 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-typeset' [around line 48 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-typeset-ps' [around line 49 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-view-ps' [around line 37 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-typeset' [around line 38 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-typeset-ps' [around line 39 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-fax' [around line 41 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-paper' [around line 83 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-table' [around line 84 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-quotes' [around line 85 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-itemize-bullets-select' [around line
94 of file ~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `table-insert' [around line 102 of file
~/tex/share/lyx/bind/menus.bind]
Unable to find icon `buffer-open'
Unable to find icon `buffer-write'
Unable to find icon `buffer-print'
Unable to find icon `cut'
Unable to find icon `copy'
Unable to find icon `paste'
Unable to find icon `font-emph'
Unable to find icon `font-noun'
Unable to find icon `font-free'
Unable to find icon `footnote-insert'
Unable to find icon `marginpar-insert'
Unable to find icon `depth-next'
Unable to find icon `tex-mode'
Unable to find icon `math-mode'
Unable to find icon `figure-insert'
Unable to find icon `dialog-tabular-insert'
lyx: SIGSEGV signal caught
Sorry, you have found a bug in LyX. If possible, please read 'Known
bugs'
under the Help menu and then send us a full bug report. Thanks!
Bye.
Abort process (core dumped)
== lyxrc.default file as created by LyX during first launch
=
/Perfo/peer/.lyx
ls -l
total 9
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 bind/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:35 doc/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 kbd/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 layouts/
-rw-rw-r-- 1 peer Perfo673 Jan 16 11:35 lyxrc.defaults
-rw-rw-r-- 1 peer Perfo117 Jan 16 11:35 packages.lst
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 reLyX/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 templates/
-rw-rw-r-- 1 peer Perfo822 Jan 16 11:35 textclass.lst
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /Perfo/peer/tex
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir =
LyX-1.1.6 compile OK, now first launch problem on OSF
Hi LyXers !
Allen's hint was the solution to the compiling problem. The make version
(that -apparently- worked fine for former releases) was not the right
one. Now with
GNU Make version 3.74 and
gcc version 2.95.1 19990816 (release)
but also using --with-included-string with ./configure, the compilation
was successfull.
BUT:
Now it seems unable to read the ~/.lyx/lyxrc.defaults it just created
before during the first run (i removed the former version ~/.lyx
directory).
???
I also tried to copy the lyxrc* files from ~/lyx-1.1.6/lib to the new
~./lyx directory, did not help. With no ~/.lyx directory LyX should run
and create this dir and create the files in it, and lyxrc will be
written later by selecting "preferences" (if one could - after a short
welcome LyX dies), right ?
Bye
Peer
PS: at least it runs under Linux: GREAT !
=== last part of output =
all the checkings...
+checking for package psnfss [times.sty]... yes
+Inspection done.
+Read the file doc/LaTeXConfig.lyx for more information.
creating textclass.lst
creating packages.lst
creating doc/LaTeXConfig.lyx
creating lyxrc.defaults
LyX: Done!
LyX: Unknown tag `\latex_command' [around line 6 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\relyx_command' [around line 7 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\view_ps_command' [around line 9 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\view_pspic_command' [around line 10 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown tag `\fax_command' [around line 14 of file
~/.lyx/lyxrc.defaults]
LyX: Unknown LyX function `buffer-view-ps' [around line 47 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-typeset' [around line 48 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-typeset-ps' [around line 49 of file
~/tex/share/lyx/bind/cua.bind]
LyX: Unknown LyX function `buffer-view-ps' [around line 37 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-typeset' [around line 38 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-typeset-ps' [around line 39 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-fax' [around line 41 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-paper' [around line 83 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-table' [around line 84 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `layout-quotes' [around line 85 of file
~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `buffer-itemize-bullets-select' [around line
94 of file ~/tex/share/lyx/bind/menus.bind]
LyX: Unknown LyX function `table-insert' [around line 102 of file
~/tex/share/lyx/bind/menus.bind]
Unable to find icon `buffer-open'
Unable to find icon `buffer-write'
Unable to find icon `buffer-print'
Unable to find icon `cut'
Unable to find icon `copy'
Unable to find icon `paste'
Unable to find icon `font-emph'
Unable to find icon `font-noun'
Unable to find icon `font-free'
Unable to find icon `footnote-insert'
Unable to find icon `marginpar-insert'
Unable to find icon `depth-next'
Unable to find icon `tex-mode'
Unable to find icon `math-mode'
Unable to find icon `figure-insert'
Unable to find icon `dialog-tabular-insert'
lyx: SIGSEGV signal caught
Sorry, you have found a bug in LyX. If possible, please read 'Known
bugs'
under the Help menu and then send us a full bug report. Thanks!
Bye.
Abort process (core dumped)
== lyxrc.default file as created by LyX during first launch
=
/Perfo/peer/.lyx
> ls -l
total 9
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 bind/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:35 doc/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 kbd/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 layouts/
-rw-rw-r-- 1 peer Perfo673 Jan 16 11:35 lyxrc.defaults
-rw-rw-r-- 1 peer Perfo117 Jan 16 11:35 packages.lst
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 reLyX/
drwxrwxr-x 2 peer Perfo512 Jan 16 11:34 templates/
-rw-rw-r-- 1 peer Perfo822 Jan 16 11:35 textclass.lst
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /Perfo/peer/tex
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir =
LyX-1.1.6 compile problem on OSF
Hi everybody !
unlike for all the previous releases i'm unable to compile LyX-1.1.6
today:
===
Platform configuration:
===
DEC alphaev56 with OSF1 V4.0e
==
Some configure messages that might be of interest:
but those were also present for the former LyX releases
and they compiled OK.
==
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
=
Final configure messages:
=
=== The following minor problems have been detected by configure.
=== Please check the messages below before running 'make'.
=== (see the section 'Problems' in the INSTALL file)
== LyX should work ok with version 0.89.0 of xforms, but
it is an unproven version and might still have some bugs. If you
have problems, please use version 0.88 instead.
Configuration of LyX was successful.
Type 'make' to compile the program,
and then 'make install' to install it.
==
make messages:
as a matter of fact the dir ~/lyx-1.1.6/sigc++/macros exists
and acconfig.h is located in ~/lyx-1.1.6/sigc++
==
No suffix list. --- what about this ?
Making all in intl
Making all in po
Making all in sigc++
Make: Don't know how to make ./macros/acconfig.h.m4. Stop.
*** Exit 1
Stop.
The Makefile is attached.
Can somebody help ?
I'm impatiently looking forward to have this new version running :-)
Bye
Peer
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /Perfo/peer/tex
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/lyx
pkglibdir = $(libdir)/lyx
pkgincludedir = $(includedir)/lyx
top_builddir = .
ACLOCAL = /Perfo/peer/lyx-1.1.6/config/missing aclocal
AUTOCONF = /Perfo/peer/lyx-1.1.6/config/missing autoconf
AUTOMAKE = /Perfo/peer/lyx-1.1.6/config/missing automake
AUTOHEADER = /Perfo/peer/lyx-1.1.6/config/missing autoheader
INSTALL = config/install-sh -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL}
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = alphaev56-dec-osf4.0e
build_triplet = alphaev56-dec-osf4.0e
host_alias = alphaev56-dec-osf4.0e
host_triplet = alphaev56-dec-osf4.0e
target_alias = alphaev56-dec-osf4.0e
target_triplet = alphaev56-dec-osf4.0e
AS =
AWK = @AWK@
BONOBO_CFLAGS = @BONOBO_CFLAGS@
BONOBO_LIBS = @BONOBO_LIBS@
BUILD_GUILE = @BUILD_GUILE@
CATALOGS = ca.gmo cs.gmo da.gmo de.gmo es.gmo eu.gmo fi.gmo fr.gmo he.gmo hu.gmo
it.gmo nl.gmo no.gmo pl.gmo pt.gmo ro.gmo ru.gmo sl.gmo sv.gmo tr.gmo wa.gmo
CATOBJEXT = .gmo
CC = gcc
CURSES_INCLUDEDIR = @CURSES_INCLUDEDIR@
CURSES_LIBS = @CURSES_LIBS@
CXX = g++
CXXCPP = g++ -E
DATADIRNAME = share
DLLTOOL =
EXEEXT =
FRONTEND =
FRONTEND_GUILIB = ${top_builddir}/src/frontends/xforms/libxforms.la
FRONTEND_INCLUDES =
FRONTEND_LDFLAGS =
FRONTEND_LIBS =
GENCAT =
GHTTP_LIB = @GHTTP_LIB@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMOFILES = ca.gmo cs.gmo da.gmo de.gmo es.gmo eu.gmo fi.gmo fr.gmo he.gmo hu.gmo
it.gmo nl.gmo no.gmo pl.gmo pt.gmo ro.gmo ru.gmo sl.gmo sv.gmo tr.gmo wa.gmo
GMSGFMT = msgfmt
GNOMEGNORBA_LIBS =
GNOMEMM_INCLUDEDIR =
GNOMEMM_LIBDIR =
GNOMEMM_LIBS =
GNOMEUI_LIBS =
GNOME_ACLOCAL_DIR = @GNOME_ACLOCAL_DIR@
GNOME_APPLETS_LIBS =
GNOME_CAPPLET_LIBS =
GNOME_CONFIG =
GNOME_DOCKLETS_LIBS =
GNOME_INCLUDEDIR =
GNOME_LIBDIR =
GNOME_LIBS =
GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
GNOME_XML_LIB = @GNOME_XML_LIB@
GNORBA_CFLAGS =
GNORBA_LIBS =
GPERF = @GPERF@
GTKMM_CFLAGS =
GTKMM_CONFIG =
GTKMM_LIBS =
GTKXMHTML_LIBS =
GTK_CFLAGS =
GTK_CONFIG =
GTK_LIBS =
GT_NO =
GT_YES = #YES#
GUILE_INCS = @GUILE_INCS@
GUILE_LIBS = @GUILE_LIBS@
IDL = @IDL@
INCLUDED_SIGC =
LyX-1.1.6 compile problem on OSF
Hi everybody !
unlike for all the previous releases i'm unable to compile LyX-1.1.6
today:
===
Platform configuration:
===
DEC alphaev56 with OSF1 V4.0e
==
Some configure messages that might be of interest:
but those were also present for the former LyX releases
and they compiled OK.
==
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
=
Final configure messages:
=
=== The following minor problems have been detected by configure.
=== Please check the messages below before running 'make'.
=== (see the section 'Problems' in the INSTALL file)
== LyX should work ok with version 0.89.0 of xforms, but
it is an unproven version and might still have some bugs. If you
have problems, please use version 0.88 instead.
Configuration of LyX was successful.
Type 'make' to compile the program,
and then 'make install' to install it.
==
make messages:
as a matter of fact the dir ~/lyx-1.1.6/sigc++/macros exists
and acconfig.h is located in ~/lyx-1.1.6/sigc++
==
No suffix list. --- what about this ?
Making all in intl
Making all in po
Making all in sigc++
Make: Don't know how to make ./macros/acconfig.h.m4. Stop.
*** Exit 1
Stop.
The Makefile is attached.
Can somebody help ?
I'm impatiently looking forward to have this new version running :-)
Bye
Peer
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /Perfo/peer/tex
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/lyx
pkglibdir = $(libdir)/lyx
pkgincludedir = $(includedir)/lyx
top_builddir = .
ACLOCAL = /Perfo/peer/lyx-1.1.6/config/missing aclocal
AUTOCONF = /Perfo/peer/lyx-1.1.6/config/missing autoconf
AUTOMAKE = /Perfo/peer/lyx-1.1.6/config/missing automake
AUTOHEADER = /Perfo/peer/lyx-1.1.6/config/missing autoheader
INSTALL = config/install-sh -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL}
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = alphaev56-dec-osf4.0e
build_triplet = alphaev56-dec-osf4.0e
host_alias = alphaev56-dec-osf4.0e
host_triplet = alphaev56-dec-osf4.0e
target_alias = alphaev56-dec-osf4.0e
target_triplet = alphaev56-dec-osf4.0e
AS =
AWK = @AWK@
BONOBO_CFLAGS = @BONOBO_CFLAGS@
BONOBO_LIBS = @BONOBO_LIBS@
BUILD_GUILE = @BUILD_GUILE@
CATALOGS = ca.gmo cs.gmo da.gmo de.gmo es.gmo eu.gmo fi.gmo fr.gmo he.gmo hu.gmo
it.gmo nl.gmo no.gmo pl.gmo pt.gmo ro.gmo ru.gmo sl.gmo sv.gmo tr.gmo wa.gmo
CATOBJEXT = .gmo
CC = gcc
CURSES_INCLUDEDIR = @CURSES_INCLUDEDIR@
CURSES_LIBS = @CURSES_LIBS@
CXX = g++
CXXCPP = g++ -E
DATADIRNAME = share
DLLTOOL =
EXEEXT =
FRONTEND =
FRONTEND_GUILIB = ${top_builddir}/src/frontends/xforms/libxforms.la
FRONTEND_INCLUDES =
FRONTEND_LDFLAGS =
FRONTEND_LIBS =
GENCAT =
GHTTP_LIB = @GHTTP_LIB@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMOFILES = ca.gmo cs.gmo da.gmo de.gmo es.gmo eu.gmo fi.gmo fr.gmo he.gmo hu.gmo
it.gmo nl.gmo no.gmo pl.gmo pt.gmo ro.gmo ru.gmo sl.gmo sv.gmo tr.gmo wa.gmo
GMSGFMT = msgfmt
GNOMEGNORBA_LIBS =
GNOMEMM_INCLUDEDIR =
GNOMEMM_LIBDIR =
GNOMEMM_LIBS =
GNOMEUI_LIBS =
GNOME_ACLOCAL_DIR = @GNOME_ACLOCAL_DIR@
GNOME_APPLETS_LIBS =
GNOME_CAPPLET_LIBS =
GNOME_CONFIG =
GNOME_DOCKLETS_LIBS =
GNOME_INCLUDEDIR =
GNOME_LIBDIR =
GNOME_LIBS =
GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
GNOME_XML_LIB = @GNOME_XML_LIB@
GNORBA_CFLAGS =
GNORBA_LIBS =
GPERF = @GPERF@
GTKMM_CFLAGS =
GTKMM_CONFIG =
GTKMM_LIBS =
GTKXMHTML_LIBS =
GTK_CFLAGS =
GTK_CONFIG =
GTK_LIBS =
GT_NO =
GT_YES = #YES#
GUILE_INCS = @GUILE_INCS@
GUILE_LIBS = @GUILE_LIBS@
IDL = @IDL@
INCLUDED_SIGC =
LyX-1.1.6 compile problem on OSF
Hi everybody !
unlike for all the previous releases i'm unable to compile LyX-1.1.6
today:
===
Platform configuration:
===
DEC alphaev56 with OSF1 V4.0e
==
Some configure messages that might be of interest:
but those were also present for the former LyX releases
and they compiled OK.
==
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
=
Final configure messages:
=
=== The following minor problems have been detected by configure.
=== Please check the messages below before running 'make'.
=== (see the section 'Problems' in the INSTALL file)
== LyX should work ok with version 0.89.0 of xforms, but
it is an unproven version and might still have some bugs. If you
have problems, please use version 0.88 instead.
Configuration of LyX was successful.
Type 'make' to compile the program,
and then 'make install' to install it.
==
make messages:
as a matter of fact the dir ~/lyx-1.1.6/sigc++/macros exists
and acconfig.h is located in ~/lyx-1.1.6/sigc++
==
No suffix list. <--- what about this ?
Making all in intl
Making all in po
Making all in sigc++
Make: Don't know how to make ./macros/acconfig.h.m4. Stop.
*** Exit 1
Stop.
The Makefile is attached.
Can somebody help ?
I'm impatiently looking forward to have this new version running :-)
Bye
Peer
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /Perfo/peer/tex
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/lyx
pkglibdir = $(libdir)/lyx
pkgincludedir = $(includedir)/lyx
top_builddir = .
ACLOCAL = /Perfo/peer/lyx-1.1.6/config/missing aclocal
AUTOCONF = /Perfo/peer/lyx-1.1.6/config/missing autoconf
AUTOMAKE = /Perfo/peer/lyx-1.1.6/config/missing automake
AUTOHEADER = /Perfo/peer/lyx-1.1.6/config/missing autoheader
INSTALL = config/install-sh -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL}
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = alphaev56-dec-osf4.0e
build_triplet = alphaev56-dec-osf4.0e
host_alias = alphaev56-dec-osf4.0e
host_triplet = alphaev56-dec-osf4.0e
target_alias = alphaev56-dec-osf4.0e
target_triplet = alphaev56-dec-osf4.0e
AS =
AWK = @AWK@
BONOBO_CFLAGS = @BONOBO_CFLAGS@
BONOBO_LIBS = @BONOBO_LIBS@
BUILD_GUILE = @BUILD_GUILE@
CATALOGS = ca.gmo cs.gmo da.gmo de.gmo es.gmo eu.gmo fi.gmo fr.gmo he.gmo hu.gmo
it.gmo nl.gmo no.gmo pl.gmo pt.gmo ro.gmo ru.gmo sl.gmo sv.gmo tr.gmo wa.gmo
CATOBJEXT = .gmo
CC = gcc
CURSES_INCLUDEDIR = @CURSES_INCLUDEDIR@
CURSES_LIBS = @CURSES_LIBS@
CXX = g++
CXXCPP = g++ -E
DATADIRNAME = share
DLLTOOL =
EXEEXT =
FRONTEND =
FRONTEND_GUILIB = ${top_builddir}/src/frontends/xforms/libxforms.la
FRONTEND_INCLUDES =
FRONTEND_LDFLAGS =
FRONTEND_LIBS =
GENCAT =
GHTTP_LIB = @GHTTP_LIB@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMOFILES = ca.gmo cs.gmo da.gmo de.gmo es.gmo eu.gmo fi.gmo fr.gmo he.gmo hu.gmo
it.gmo nl.gmo no.gmo pl.gmo pt.gmo ro.gmo ru.gmo sl.gmo sv.gmo tr.gmo wa.gmo
GMSGFMT = msgfmt
GNOMEGNORBA_LIBS =
GNOMEMM_INCLUDEDIR =
GNOMEMM_LIBDIR =
GNOMEMM_LIBS =
GNOMEUI_LIBS =
GNOME_ACLOCAL_DIR = @GNOME_ACLOCAL_DIR@
GNOME_APPLETS_LIBS =
GNOME_CAPPLET_LIBS =
GNOME_CONFIG =
GNOME_DOCKLETS_LIBS =
GNOME_INCLUDEDIR =
GNOME_LIBDIR =
GNOME_LIBS =
GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
GNOME_XML_LIB = @GNOME_XML_LIB@
GNORBA_CFLAGS =
GNORBA_LIBS =
GPERF = @GPERF@
GTKMM_CFLAGS =
GTKMM_CONFIG =
GTKMM_LIBS =
GTKXMHTML_LIBS =
GTK_CFLAGS =
GTK_CONFIG =
GTK_LIBS =
GT_NO =
GT_YES = #YES#
GUILE_INCS = @GUILE_INCS@
GUILE_LIBS = @GUILE_LIBS@
IDL = @IDL@
INCLUDED_SIGC
feature suggestion Capital
A very nice feature seen on Papyrus/TOS (10 years ago) would also be very nice in LyX: to be able to change the first letter of a word from minuscule to Capital (and vice versa) via some accelerator key. -- Peer FRANK Skytec Aircraft Design Fuggerweg 19 D-86874 Mattsies mail: [EMAIL PROTECTED] web: http://home.primusnetz.de/pfrank
feature suggestion Capital
A very nice feature seen on Papyrus/TOS (10 years ago) would also be very nice in LyX: to be able to change the first letter of a word from minuscule to Capital (and vice versa) via some accelerator key. -- Peer FRANK Skytec Aircraft Design Fuggerweg 19 D-86874 Mattsies mail: [EMAIL PROTECTED] web: http://home.primusnetz.de/pfrank
feature suggestion Capital
A very nice feature seen on Papyrus/TOS (10 years ago) would also be very nice in LyX: to be able to change the first letter of a word from minuscule to Capital (and vice versa) via some accelerator key. -- Peer FRANK Skytec Aircraft Design Fuggerweg 19 D-86874 Mattsies mail: [EMAIL PROTECTED] web: http://home.primusnetz.de/pfrank
