singlespace title
Hi,
in my schools latex class, title is written in this way..
\vbox{\begin{singlespace}\uppercase\expandafte...@title}\end{singlespace}}
however since my title is too long I tried to separate it into 3 lines and used
\\ or ragged break for this..
The output is neither double space nor single space distances between lines are
not equal...
I need it in single spacing as latex class specified..
any comments?
Semih
singlespace title
Hi,
in my schools latex class, title is written in this way..
\vbox{\begin{singlespace}\uppercase\expandafte...@title}\end{singlespace}}
however since my title is too long I tried to separate it into 3 lines and used
\\ or ragged break for this..
The output is neither double space nor single space distances between lines are
not equal...
I need it in single spacing as latex class specified..
any comments?
Semih
singlespace title
Hi,
in my schools latex class, title is written in this way..
\vbox{\begin{singlespace}\uppercase\expandafte...@title}\end{singlespace}}
however since my title is too long I tried to separate it into 3 lines and used
\\ or ragged break for this..
The output is neither double space nor single space distances between lines are
not equal...
I need it in single spacing as latex class specified..
any comments?
Semih
multiline toc entry
Hi, In my toc, section names which are long are shown as xx .31 Is there a way to adjust the length at which latex cuts down the line and continue from the next line? I may do it as follows; xx31 Thanks alot, Semih
multiline toc entry
Hi, In my toc, section names which are long are shown as xx .31 Is there a way to adjust the length at which latex cuts down the line and continue from the next line? I may do it as follows; xx31 Thanks alot, Semih
multiline toc entry
Hi, In my toc, section names which are long are shown as xx .31 Is there a way to adjust the length at which latex cuts down the line and continue from the next line? I may do it as follows; xx31 Thanks alot, Semih
bad quality images
Hi, I have copied a image from a pdf document by range selection and directly pasted to lyx.. Although the quality of the image in pdf document was superior upto 600%, the quality of image after lyx compilation is even worse in 100% zoom.. any suggestions on howto improve quality or what I am doing wrong?? Thanks Semih
fast label formating
Hi, I almost finished my thesis and now I recognized that all eqaution cross-references are shown as 1.23 I want them all be written as Eq. 1.23 or any other prefix. Are there any fast way to do this? thanks in advance.. Semih
adjusting distance before and after figures or tables
Hi, I couldnot find any setting to adjust distance before and after the figures and tables. Can it be defined in latex class? if so, what parameter should I search for? Thanks Semih
bad quality images
Hi, I have copied a image from a pdf document by range selection and directly pasted to lyx.. Although the quality of the image in pdf document was superior upto 600%, the quality of image after lyx compilation is even worse in 100% zoom.. any suggestions on howto improve quality or what I am doing wrong?? Thanks Semih
fast label formating
Hi, I almost finished my thesis and now I recognized that all eqaution cross-references are shown as 1.23 I want them all be written as Eq. 1.23 or any other prefix. Are there any fast way to do this? thanks in advance.. Semih
adjusting distance before and after figures or tables
Hi, I couldnot find any setting to adjust distance before and after the figures and tables. Can it be defined in latex class? if so, what parameter should I search for? Thanks Semih
bad quality images
Hi, I have copied a image from a pdf document by range selection and directly pasted to lyx.. Although the quality of the image in pdf document was superior upto 600%, the quality of image after lyx compilation is even worse in 100% zoom.. any suggestions on howto improve quality or what I am doing wrong?? Thanks Semih
fast label formating
Hi, I almost finished my thesis and now I recognized that all eqaution cross-references are shown as 1.23 I want them all be written as Eq. 1.23 or any other prefix. Are there any fast way to do this? thanks in advance.. Semih
adjusting distance before and after figures or tables
Hi, I couldnot find any setting to adjust distance before and after the figures and tables. Can it be defined in latex class? if so, what parameter should I search for? Thanks Semih
line break in numbered paragragh
Hi people, I am trying to wirte my thesis on lyx by using a supplied latex class. It is working quite weill with the lyx.However today I faced with a small problem. I needed a third level numbered section...subsubsubsection. then I enabled paragraph numbering from Document-Settings-Numbering.. however now lyx the following output 1.1.1.1.1 TITLE (a small distance here) bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla I need to give a line break after TITLE. I tried ragged break but it is not working through this paragraph..What can I do??
Augmented like matrix
Hi, I need to express the equation which is presented in attachment. I could not do the horizontal or vertical lines in to matrix..Any suggestions?attachment: Condensation.JPG
sorting multiple references in itself
Hi, I need to sort my multiple references...my references are sorted according to their occurence on the file and follows the order quiet well but when I give a multiple reference, [21,1,3,7] can be generated..but I want to sort this group in itself automatically. Any suggestions? Semih
line break in numbered paragragh
Hi people, I am trying to wirte my thesis on lyx by using a supplied latex class. It is working quite weill with the lyx.However today I faced with a small problem. I needed a third level numbered section...subsubsubsection. then I enabled paragraph numbering from Document-Settings-Numbering.. however now lyx the following output 1.1.1.1.1 TITLE (a small distance here) bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla I need to give a line break after TITLE. I tried ragged break but it is not working through this paragraph..What can I do??
Augmented like matrix
Hi, I need to express the equation which is presented in attachment. I could not do the horizontal or vertical lines in to matrix..Any suggestions?attachment: Condensation.JPG
sorting multiple references in itself
Hi, I need to sort my multiple references...my references are sorted according to their occurence on the file and follows the order quiet well but when I give a multiple reference, [21,1,3,7] can be generated..but I want to sort this group in itself automatically. Any suggestions? Semih
line break in numbered paragragh
Hi people, I am trying to wirte my thesis on lyx by using a supplied latex class. It is working quite weill with the lyx.However today I faced with a small problem. I needed a third level numbered section...subsubsubsection. then I enabled paragraph numbering from Document->Settings->Numbering.. however now lyx the following output 1.1.1.1.1 TITLE (a small distance here) bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla I need to give a line break after TITLE. I tried ragged break but it is not working through this paragraph..What can I do??
Augmented like matrix
Hi, I need to express the equation which is presented in attachment. I could not do the horizontal or vertical lines in to matrix..Any suggestions?<>
sorting multiple references in itself
Hi, I need to sort my multiple references...my references are sorted according to their occurence on the file and follows the order quiet well but when I give a multiple reference, [21,1,3,7] can be generated..but I want to sort this group in itself automatically. Any suggestions? Semih
Un-subscribe
-- Semih Ozmen Proya Tech. Software Development Civil/Software Eng.@ ComoSYS Project http://www.semihozmen.com/ MSN: ozmense...@hotmail.com
Un-subscribe
-- Semih Ozmen Proya Tech. Software Development Civil/Software Eng.@ ComoSYS Project http://www.semihozmen.com/ MSN: ozmense...@hotmail.com
Un-subscribe
-- Semih Ozmen Proya Tech. Software Development Civil/Software Eng.@ ComoSYS Project http://www.semihozmen.com/ MSN: ozmense...@hotmail.com
Lyx:inset::buffer_member not initialized!
Lyx Code:11 name: unknown No file open! The current document was closed.. what is this error? do you have any idea? I am getting it while an import.. after this errror mouse pointer get an hanging busy image.. -- Semih Ozmen Proya Tech. Software Development Civil/Software Eng.@ ComoSYS Project http://www.semihozmen.com/ MSN: ozmense...@hotmail.com
Lyx:inset::buffer_member not initialized!
Lyx Code:11 name: unknown No file open! The current document was closed.. what is this error? do you have any idea? I am getting it while an import.. after this errror mouse pointer get an hanging busy image.. -- Semih Ozmen Proya Tech. Software Development Civil/Software Eng.@ ComoSYS Project http://www.semihozmen.com/ MSN: ozmense...@hotmail.com
Lyx:inset::buffer_member not initialized!
Lyx Code:11 name: unknown No file open! The current document was closed.. what is this error? do you have any idea? I am getting it while an import.. after this errror mouse pointer get an hanging busy image.. -- Semih Ozmen Proya Tech. Software Development Civil/Software Eng.@ ComoSYS Project http://www.semihozmen.com/ MSN: ozmense...@hotmail.com
latex error: NO \TITLE
Hi,
Finally, with the help of rh, I imported my latex template.
but when I try to call \makenewapproval
command latex says NO\ TITLE definition so added the following line to
preample.
\renewcommand\makenewapproval{}
however command is not producing anything in the preview.possibly my command
calling is wrong,
by checking the cls file attached, could you please tell me syntax for the
commandcalls for
makenewapproval
maketitle
abstract
oz
commands. I know that it is not good to ask for this but my schedule is so
hectic and promise I will learn the details later.
any suggestions on command calls???
metu.cls
Description: Binary data
latex error: NO \TITLE
Hi,
Finally, with the help of rh, I imported my latex template.
but when I try to call \makenewapproval
command latex says NO\ TITLE definition so added the following line to
preample.
\renewcommand\makenewapproval{}
however command is not producing anything in the preview.possibly my command
calling is wrong,
by checking the cls file attached, could you please tell me syntax for the
commandcalls for
makenewapproval
maketitle
abstract
oz
commands. I know that it is not good to ask for this but my schedule is so
hectic and promise I will learn the details later.
any suggestions on command calls???
metu.cls
Description: Binary data
latex error: NO \TITLE
Hi,
Finally, with the help of rh, I imported my latex template.
but when I try to call \makenewapproval
command latex says NO\ TITLE definition so added the following line to
preample.
\renewcommand\makenewapproval{}
however command is not producing anything in the preview.possibly my command
calling is wrong,
by checking the cls file attached, could you please tell me syntax for the
commandcalls for
makenewapproval
maketitle
abstract
oz
commands. I know that it is not good to ask for this but my schedule is so
hectic and promise I will learn the details later.
any suggestions on command calls???
metu.cls
Description: Binary data
hanging -- valid latex class declaration
Hi, I have updated latex classes in miktex(v 2.7) with a new class which is valid while using with winedt.. it builds beautiful papers but I want to use it in lyx.(v1.6.0 or 1.6.1 for win) so created a lyx layout and reconfigured lyx.. so now in document settings window I can see my class.. but when I choose it lyx is hanging and do not load this class.. any comments or suggestions.. thanks for the replies in advance.. Semih
Re: hanging -- valid latex class declaration
Here is the valid latex class and its lyx layout file if needed.. - Original Message - From: Semih Özmen soz...@proyatech.com To: lyx-users@lists.lyx.org Sent: Saturday, December 27, 2008 1:41 AM Subject: hanging -- valid latex class declaration Hi, I have updated latex classes in miktex(v 2.7) with a new class which is valid while using with winedt.. it builds beautiful papers but I want to use it in lyx.(v1.6.0 or 1.6.1 for win) so created a lyx layout and reconfigured lyx.. so now in document settings window I can see my class.. but when I choose it lyx is hanging and do not load this class.. any comments or suggestions.. thanks for the replies in advance.. Semih metu.cls Description: Binary data metu.layout Description: Binary data
hanging -- valid latex class declaration
Hi, I have updated latex classes in miktex(v 2.7) with a new class which is valid while using with winedt.. it builds beautiful papers but I want to use it in lyx.(v1.6.0 or 1.6.1 for win) so created a lyx layout and reconfigured lyx.. so now in document settings window I can see my class.. but when I choose it lyx is hanging and do not load this class.. any comments or suggestions.. thanks for the replies in advance.. Semih
Re: hanging -- valid latex class declaration
Here is the valid latex class and its lyx layout file if needed.. - Original Message - From: Semih Özmen soz...@proyatech.com To: lyx-users@lists.lyx.org Sent: Saturday, December 27, 2008 1:41 AM Subject: hanging -- valid latex class declaration Hi, I have updated latex classes in miktex(v 2.7) with a new class which is valid while using with winedt.. it builds beautiful papers but I want to use it in lyx.(v1.6.0 or 1.6.1 for win) so created a lyx layout and reconfigured lyx.. so now in document settings window I can see my class.. but when I choose it lyx is hanging and do not load this class.. any comments or suggestions.. thanks for the replies in advance.. Semih metu.cls Description: Binary data metu.layout Description: Binary data
hanging --> valid latex class declaration
Hi, I have updated latex classes in miktex(v 2.7) with a new class which is valid while using with winedt.. it builds beautiful papers but I want to use it in lyx.(v1.6.0 or 1.6.1 for win) so created a lyx layout and reconfigured lyx.. so now in document settings window I can see my class.. but when I choose it lyx is hanging and do not load this class.. any comments or suggestions.. thanks for the replies in advance.. Semih
Re: hanging --> valid latex class declaration
Here is the valid latex class and its lyx layout file if needed.. - Original Message - From: "Semih Özmen" <soz...@proyatech.com> To: <lyx-users@lists.lyx.org> Sent: Saturday, December 27, 2008 1:41 AM Subject: hanging --> valid latex class declaration Hi, I have updated latex classes in miktex(v 2.7) with a new class which is valid while using with winedt.. it builds beautiful papers but I want to use it in lyx.(v1.6.0 or 1.6.1 for win) so created a lyx layout and reconfigured lyx.. so now in document settings window I can see my class.. but when I choose it lyx is hanging and do not load this class.. any comments or suggestions.. thanks for the replies in advance.. Semih metu.cls Description: Binary data metu.layout Description: Binary data
