Re: Re[2]: Configuring Lyx
I have installed Xforms from there RPM files - I thought I only had to do that if I ran make myself - sorry I'm a beginner so I get a bit confused. I have got a forms.h file, and I have tried compiling using --with-extra-libraries=/usr//forms.h but with no luck Tom. - Original Message - From: Dragutin Cvetkovic [EMAIL PROTECTED] To: Tom Beale [EMAIL PROTECTED] Cc: Lyx Group [EMAIL PROTECTED] Sent: Thursday, October 12, 2000 9:15 PM Subject: Re[2]: Configuring Lyx Pozdrav Tom, Thursday, October 12, 2000, 7:40:27 PM, you wrote: T It doesn't configure with both xforms and xforms-devel either 0.88 or 0.89. T I have tried make distclean, which didn't solve it, and neither did deleting T it all and re-expanding it from the .tar archive. T Tom. T - Original Message - T From: Paul E Johnson [EMAIL PROTECTED] T To: Tom Beale [EMAIL PROTECTED] T Sent: Thursday, October 12, 2000 1:24 PM T Subject: Re: Configuring Lyx Your devel edition must match your xforms edition. Where are you getting the rpm for 0.89? OK, so I'm just guessing. One of the most common problems is that people have configure fail, and then they install what they need, and run configure again in the same place. It uses the cached settings from the last configure. I think lyx has "make distclean" to get a fresh start. If not, you have to erase the source tree and try again. pj Tom Beale wrote: I already had xforms-devel 0.88 installed. I have now tried installing xforms-devel 0.89-6 but that doesn't seem to make any difference. Tom. a stupid question but have u actually made it exist in proper directories, you know /usr/include and such... /usr/lib ... and then did a ldconfig? Sve najbolje, Dragutinmailto:[EMAIL PROTECTED]
Re: Re[2]: Configuring Lyx
I have installed Xforms from there RPM files - I thought I only had to do that if I ran make myself - sorry I'm a beginner so I get a bit confused. I have got a forms.h file, and I have tried compiling using --with-extra-libraries=/usr//forms.h but with no luck Tom. - Original Message - From: Dragutin Cvetkovic [EMAIL PROTECTED] To: Tom Beale [EMAIL PROTECTED] Cc: Lyx Group [EMAIL PROTECTED] Sent: Thursday, October 12, 2000 9:15 PM Subject: Re[2]: Configuring Lyx Pozdrav Tom, Thursday, October 12, 2000, 7:40:27 PM, you wrote: T It doesn't configure with both xforms and xforms-devel either 0.88 or 0.89. T I have tried make distclean, which didn't solve it, and neither did deleting T it all and re-expanding it from the .tar archive. T Tom. T - Original Message - T From: Paul E Johnson [EMAIL PROTECTED] T To: Tom Beale [EMAIL PROTECTED] T Sent: Thursday, October 12, 2000 1:24 PM T Subject: Re: Configuring Lyx Your devel edition must match your xforms edition. Where are you getting the rpm for 0.89? OK, so I'm just guessing. One of the most common problems is that people have configure fail, and then they install what they need, and run configure again in the same place. It uses the cached settings from the last configure. I think lyx has "make distclean" to get a fresh start. If not, you have to erase the source tree and try again. pj Tom Beale wrote: I already had xforms-devel 0.88 installed. I have now tried installing xforms-devel 0.89-6 but that doesn't seem to make any difference. Tom. a stupid question but have u actually made it exist in proper directories, you know /usr/include and such... /usr/lib ... and then did a ldconfig? Sve najbolje, Dragutinmailto:[EMAIL PROTECTED]
Re: Re[2]: Configuring Lyx
I have installed Xforms from there RPM files - I thought I only had to do that if I ran make myself - sorry I'm a beginner so I get a bit confused. I have got a forms.h file, and I have tried compiling using --with-extra-libraries=/usr//forms.h but with no luck Tom. - Original Message - From: Dragutin Cvetkovic <[EMAIL PROTECTED]> To: Tom Beale <[EMAIL PROTECTED]> Cc: Lyx Group <[EMAIL PROTECTED]> Sent: Thursday, October 12, 2000 9:15 PM Subject: Re[2]: Configuring Lyx > Pozdrav Tom, > > Thursday, October 12, 2000, 7:40:27 PM, you wrote: > > T> It doesn't configure with both xforms and xforms-devel either 0.88 or 0.89. > T> I have tried make distclean, which didn't solve it, and neither did deleting > T> it all and re-expanding it from the .tar archive. > > T> Tom. > T> - Original Message ----- > T> From: Paul E Johnson <[EMAIL PROTECTED]> > T> To: Tom Beale <[EMAIL PROTECTED]> > T> Sent: Thursday, October 12, 2000 1:24 PM > T> Subject: Re: Configuring Lyx > > > >> Your devel edition must match your xforms edition. Where are you > >> getting the rpm for 0.89? > >> > >> OK, so I'm just guessing. > >> > >> One of the most common problems is that people have configure fail, and > >> then they install what they need, and run configure again in the same > >> place. It uses the cached settings from the last configure. I think lyx > >> has "make distclean" to get a fresh start. If not, you have to erase the > >> source tree and try again. > >> > >> > >> pj > >> > >> Tom Beale wrote: > >> > > >> > I already had xforms-devel 0.88 installed. I have now tried installing > >> > xforms-devel 0.89-6 but that doesn't seem to make any difference. > >> > > >> > Tom. > > > a stupid question but have u actually made it exist in proper > directories, you know /usr/include and such... /usr/lib ... and then > did a ldconfig? > > Sve najbolje, > Dragutinmailto:[EMAIL PROTECTED] > > >
Re: Configuring Lyx
It doesn't configure with both xforms and xforms-devel either 0.88 or 0.89. I have tried make distclean, which didn't solve it, and neither did deleting it all and re-expanding it from the .tar archive. Tom. - Original Message - From: Paul E Johnson [EMAIL PROTECTED] To: Tom Beale [EMAIL PROTECTED] Sent: Thursday, October 12, 2000 1:24 PM Subject: Re: Configuring Lyx Your devel edition must match your xforms edition. Where are you getting the rpm for 0.89? OK, so I'm just guessing. One of the most common problems is that people have configure fail, and then they install what they need, and run configure again in the same place. It uses the cached settings from the last configure. I think lyx has "make distclean" to get a fresh start. If not, you have to erase the source tree and try again. pj Tom Beale wrote: I already had xforms-devel 0.88 installed. I have now tried installing xforms-devel 0.89-6 but that doesn't seem to make any difference. Tom. - Original Message - -- Paul E. Johnson email: [EMAIL PROTECTED] Dept. of Political Sciencehttp://lark.cc.ukans.edu/~pauljohn University of Kansas Office: (785) 864-9086 Lawrence, Kansas 66045FAX: (785) 864-5700
Re: Configuring Lyx
It doesn't configure with both xforms and xforms-devel either 0.88 or 0.89. I have tried make distclean, which didn't solve it, and neither did deleting it all and re-expanding it from the .tar archive. Tom. - Original Message - From: Paul E Johnson [EMAIL PROTECTED] To: Tom Beale [EMAIL PROTECTED] Sent: Thursday, October 12, 2000 1:24 PM Subject: Re: Configuring Lyx Your devel edition must match your xforms edition. Where are you getting the rpm for 0.89? OK, so I'm just guessing. One of the most common problems is that people have configure fail, and then they install what they need, and run configure again in the same place. It uses the cached settings from the last configure. I think lyx has "make distclean" to get a fresh start. If not, you have to erase the source tree and try again. pj Tom Beale wrote: I already had xforms-devel 0.88 installed. I have now tried installing xforms-devel 0.89-6 but that doesn't seem to make any difference. Tom. - Original Message - -- Paul E. Johnson email: [EMAIL PROTECTED] Dept. of Political Sciencehttp://lark.cc.ukans.edu/~pauljohn University of Kansas Office: (785) 864-9086 Lawrence, Kansas 66045FAX: (785) 864-5700
Re: Configuring Lyx
It doesn't configure with both xforms and xforms-devel either 0.88 or 0.89. I have tried make distclean, which didn't solve it, and neither did deleting it all and re-expanding it from the .tar archive. Tom. - Original Message - From: Paul E Johnson <[EMAIL PROTECTED]> To: Tom Beale <[EMAIL PROTECTED]> Sent: Thursday, October 12, 2000 1:24 PM Subject: Re: Configuring Lyx > Your devel edition must match your xforms edition. Where are you > getting the rpm for 0.89? > > OK, so I'm just guessing. > > One of the most common problems is that people have configure fail, and > then they install what they need, and run configure again in the same > place. It uses the cached settings from the last configure. I think lyx > has "make distclean" to get a fresh start. If not, you have to erase the > source tree and try again. > > > pj > > Tom Beale wrote: > > > > I already had xforms-devel 0.88 installed. I have now tried installing > > xforms-devel 0.89-6 but that doesn't seem to make any difference. > > > > Tom. > > - Original Message - > > > -- > Paul E. Johnson email: [EMAIL PROTECTED] > Dept. of Political Sciencehttp://lark.cc.ukans.edu/~pauljohn > University of Kansas Office: (785) 864-9086 > Lawrence, Kansas 66045FAX: (785) 864-5700 >
Configuring Lyx
I am trying to configure Lyx 1.1.5 on Redhat 6.2. It brings up the error message that it cannot find the Xpm or Xforms Libraries. I therefore installed the respective RPM's using KPackage but this didn't make any difference. I have checked that these are the versions of Xpm and Xforms needed. Any suggestions? Thanks Tom.
Re: Configuring Lyx
I have managed to make it happy over xforms and libxpm, however it is still complaining about finding forms.h - I thought this was a file within xforms? I did try installing xforms 0.89 instead of 0.88, but that didn't seem to help. Thanks very much Tom. - Original Message - From: Paul E Johnson [EMAIL PROTECTED] To: Tom Beale [EMAIL PROTECTED] Sent: Wednesday, October 11, 2000 7:37 PM Subject: Re: Configuring Lyx Tom Beale wrote: I am trying to configure Lyx 1.1.5 on Redhat 6.2. It brings up the error message that it cannot find the Xpm or Xforms Libraries. I therefore installed the respective RPM's using KPackage but this didn't make any difference. I have checked that these are the versions of Xpm and Xforms needed. Any suggestions? Thanks Tom. you need xforms-devel and xpm-devel. pj -- Paul E. Johnson email: [EMAIL PROTECTED] Dept. of Political Sciencehttp://lark.cc.ukans.edu/~pauljohn University of Kansas Office: (785) 864-9086 Lawrence, Kansas 66045FAX: (785) 864-5700
Configuring Lyx
I am trying to configure Lyx 1.1.5 on Redhat 6.2. It brings up the error message that it cannot find the Xpm or Xforms Libraries. I therefore installed the respective RPM's using KPackage but this didn't make any difference. I have checked that these are the versions of Xpm and Xforms needed. Any suggestions? Thanks Tom.
Re: Configuring Lyx
I have managed to make it happy over xforms and libxpm, however it is still complaining about finding forms.h - I thought this was a file within xforms? I did try installing xforms 0.89 instead of 0.88, but that didn't seem to help. Thanks very much Tom. - Original Message - From: Paul E Johnson <[EMAIL PROTECTED]> To: Tom Beale <[EMAIL PROTECTED]> Sent: Wednesday, October 11, 2000 7:37 PM Subject: Re: Configuring Lyx > > Tom Beale wrote: > > > > I am trying to configure Lyx 1.1.5 on Redhat 6.2. It brings up the > > error message that it cannot find the Xpm or Xforms Libraries. I > > therefore installed the respective RPM's using KPackage but this > > didn't make any difference. I have checked that these are the > > versions of Xpm and Xforms needed. > > > > Any suggestions? > > > > Thanks > > > > Tom. > you need xforms-devel and xpm-devel. > pj > -- > Paul E. Johnson email: [EMAIL PROTECTED] > Dept. of Political Sciencehttp://lark.cc.ukans.edu/~pauljohn > University of Kansas Office: (785) 864-9086 > Lawrence, Kansas 66045FAX: (785) 864-5700 >