RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
To extract ghostscript manually you must copy the gs-4.03.tar.gz to the c:\cygwin directory. After that type "tar -xvzf gs-4.03.tar.gz". This should extract the archive including the script "SetupGS403.sh". Now you can execute the script by typing ".\SetupGS403.sh". Now you will be asked for the fonts directory of an existing GS installation. Therefore you need an additional GhostScriptinstallation for WIndows (e.g. AFPL Ghostscript7.0 - http://www.cs.wisc.edu/~ghost/gsview/ ) -Original Message-From: Mostafa Modirrousta [mailto:[EMAIL PROTECTED]]Sent: Sunday, July 15, 2001 8:34 AMTo: LyX-Users (E-Mail)Subject: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx - Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything thatit is supposed to do (latex, dvips, pdflatex, etc) without complaining. Anyone please could help me to see where I am going wrong? Thanks so much for all your attention, Christoph and others as well. Regards, mm
Re: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
Hi again and thanx again, What is most bothering me is not ghostscript or other side-dishes :) my major problem is that LyX under my system is not working. It only convert TeX to lyx format! and vice versa, no other conversion seems to be working. Please let me know what other information I've to submit so you see the problem with my system/configuration. What bothers me most is that it does not give me an error message whatsoever! and it says it is done all right! Thanks again in advance for your help, mm - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 1:11 AM Subject: RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx To extract ghostscript manually you must copy the gs-4.03.tar.gz to the c:\cygwin directory. After that type "tar -xvzf gs-4.03.tar.gz". This should extract the archive including the script "SetupGS403.sh". Now you can execute the script by typing ".\SetupGS403.sh". Now you will be asked for the fonts directory of an existing GS installation. Therefore you need an additional GhostScriptinstallation for WIndows (e.g. AFPL Ghostscript7.0 - http://www.cs.wisc.edu/~ghost/gsview/ ) -Original Message-From: Mostafa Modirrousta [mailto:[EMAIL PROTECTED]]Sent: Sunday, July 15, 2001 8:34 AMTo: LyX-Users (E-Mail)Subject: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx - Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything thatit is supposed to do (latex, dvips, pdflatex, etc) without complaining.
RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
Re: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
Now I need some help. I wrote earlier that I'm new to X and Bash :) Would you please take my hand step by step? How do I open an X-Term? I use X-Win32. Thanks. - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 6:40 AM Subject: RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
Re: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
The other thing is that I have really NOT configured my X-Win32! Why? well, I only thought that its presence would suffice to run LyX and that I do not actually need to be connected to some remote server. I don't know if that is the source of problem or not, but better to be said :) thx again for listening. - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 6:40 AM Subject: RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
To extract ghostscript manually you must copy the gs-4.03.tar.gz to the c:\cygwin directory. After that type "tar -xvzf gs-4.03.tar.gz". This should extract the archive including the script "SetupGS403.sh". Now you can execute the script by typing ".\SetupGS403.sh". Now you will be asked for the fonts directory of an existing GS installation. Therefore you need an additional GhostScriptinstallation for WIndows (e.g. AFPL Ghostscript7.0 - http://www.cs.wisc.edu/~ghost/gsview/ ) -Original Message-From: Mostafa Modirrousta [mailto:[EMAIL PROTECTED]]Sent: Sunday, July 15, 2001 8:34 AMTo: LyX-Users (E-Mail)Subject: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx - Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything thatit is supposed to do (latex, dvips, pdflatex, etc) without complaining. Anyone please could help me to see where I am going wrong? Thanks so much for all your attention, Christoph and others as well. Regards, mm
Re: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
Hi again and thanx again, What is most bothering me is not ghostscript or other side-dishes :) my major problem is that LyX under my system is not working. It only convert TeX to lyx format! and vice versa, no other conversion seems to be working. Please let me know what other information I've to submit so you see the problem with my system/configuration. What bothers me most is that it does not give me an error message whatsoever! and it says it is done all right! Thanks again in advance for your help, mm - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 1:11 AM Subject: RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx To extract ghostscript manually you must copy the gs-4.03.tar.gz to the c:\cygwin directory. After that type "tar -xvzf gs-4.03.tar.gz". This should extract the archive including the script "SetupGS403.sh". Now you can execute the script by typing ".\SetupGS403.sh". Now you will be asked for the fonts directory of an existing GS installation. Therefore you need an additional GhostScriptinstallation for WIndows (e.g. AFPL Ghostscript7.0 - http://www.cs.wisc.edu/~ghost/gsview/ ) -Original Message-From: Mostafa Modirrousta [mailto:[EMAIL PROTECTED]]Sent: Sunday, July 15, 2001 8:34 AMTo: LyX-Users (E-Mail)Subject: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx - Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything thatit is supposed to do (latex, dvips, pdflatex, etc) without complaining.
RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
Re: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
Now I need some help. I wrote earlier that I'm new to X and Bash :) Would you please take my hand step by step? How do I open an X-Term? I use X-Win32. Thanks. - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 6:40 AM Subject: RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
Re: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
The other thing is that I have really NOT configured my X-Win32! Why? well, I only thought that its presence would suffice to run LyX and that I do not actually need to be connected to some remote server. I don't know if that is the source of problem or not, but better to be said :) thx again for listening. - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 6:40 AM Subject: RE: LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
RE: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx
To extract ghostscript manually you must copy the gs-4.03.tar.gz to the c:\cygwin directory. After that type "tar -xvzf gs-4.03.tar.gz". This should extract the archive including the script "SetupGS403.sh". Now you can execute the script by typing ".\SetupGS403.sh". Now you will be asked for the fonts directory of an existing GS installation. Therefore you need an additional GhostScript installation for WIndows (e.g. AFPL Ghostscript 7.0 -> http://www.cs.wisc.edu/~ghost/gsview/ ) -Original Message-From: Mostafa Modirrousta [mailto:[EMAIL PROTECTED]]Sent: Sunday, July 15, 2001 8:34 AMTo: LyX-Users (E-Mail)Subject: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx - Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything that it is supposed to do (latex, dvips, pdflatex, etc) without complaining. Anyone please could help me to see where I am going wrong? Thanks so much for all your attention, Christoph and others as well. Regards, m
Re: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx
Hi again and thanx again, What is most bothering me is not ghostscript or other side-dishes :) my major problem is that LyX under my system is not working. It only convert TeX to lyx format! and vice versa, no other conversion seems to be working. Please let me know what other information I've to submit so you see the problem with my system/configuration. What bothers me most is that it does not give me an error message whatsoever! and it says it is done all right! Thanks again in advance for your help, m - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 1:11 AM Subject: RE: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx To extract ghostscript manually you must copy the gs-4.03.tar.gz to the c:\cygwin directory. After that type "tar -xvzf gs-4.03.tar.gz". This should extract the archive including the script "SetupGS403.sh". Now you can execute the script by typing ".\SetupGS403.sh". Now you will be asked for the fonts directory of an existing GS installation. Therefore you need an additional GhostScript installation for WIndows (e.g. AFPL Ghostscript 7.0 -> http://www.cs.wisc.edu/~ghost/gsview/ ) -Original Message-From: Mostafa Modirrousta [mailto:[EMAIL PROTECTED]]Sent: Sunday, July 15, 2001 8:34 AMTo: LyX-Users (E-Mail)Subject: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx - Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything that it is supposed to do (latex, dvips, pdflatex, etc) without
RE: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx
Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
Re: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx
Now I need some help. I wrote earlier that I'm new to X and Bash :) Would you please take my hand step by step? How do I open an X-Term? I use X-Win32. Thanks. - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 6:40 AM Subject: RE: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
Re: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx
The other thing is that I have really NOT configured my X-Win32! Why? well, I only thought that its presence would suffice to run LyX and that I do not actually need to be connected to some remote server. I don't know if that is the source of problem or not, but better to be said :) thx again for listening. - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Monday, July 16, 2001 6:40 AM Subject: RE: LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx Try to open LyX from within a terminal of your X-server, so you can see the output produced by LyX. Possibly this will help determining the REAL reason...
LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
- Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything thatit is supposed to do (latex, dvips, pdflatex, etc) without complaining. Anyone please could help me to see where I am going wrong? Thanks so much for all your attention, Christoph and others as well. Regards, mm - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Thursday, July 12, 2001 11:51 PM Subject: RE: LyX + WinME + MikTeX If you download all the necessary files from the LyX for Win32 page (including the ghostscript4.03 - version there) there should be no problem. You can extract ghostscript manually by copying gs-4.03.tar.gz to your Cygwin root directory and executing "tar -xvzf gs-4.03.tar.gz". Of course you need a Ghostscript - Version too for Windows (try Aladdin Ghostscript) After that you have to run the "SetupGS403.sh" from a shell within your X-Server or Cygwin. Then start LyX and exit. Now a "preferences" file is in your ".lyx" - Directory in your home directory. Insert the following line into the preferences file \ps_command "/apps/gs4.03/bin/gs" After that LyX should be able todisplay EPS files. For making or exporting dvi or ps you'll need to install the FULL MiKTeX 2.1 version. Otherwise there are several *.sty - files mising. You can download them from http://www.bestkevin.com/Download/various/sty/ After downloading and saving within your localtexmf directory you should run "initexmf -u". If you have set the PATH for MiKTeX binaries (C:\Programme\MiKTeX\miktex\bin) correctly then everything should work fine. It's very helpful to have a look at the latex - log - file. (View -- Latex logfile). There you can see whether are STY files or something is missing or not. Christoph
LyX + WinME + MikTeX -- Still the problem in installation is there. Anyone would please help? Thanx
- Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything thatit is supposed to do (latex, dvips, pdflatex, etc) without complaining. Anyone please could help me to see where I am going wrong? Thanks so much for all your attention, Christoph and others as well. Regards, mm - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Thursday, July 12, 2001 11:51 PM Subject: RE: LyX + WinME + MikTeX If you download all the necessary files from the LyX for Win32 page (including the ghostscript4.03 - version there) there should be no problem. You can extract ghostscript manually by copying gs-4.03.tar.gz to your Cygwin root directory and executing "tar -xvzf gs-4.03.tar.gz". Of course you need a Ghostscript - Version too for Windows (try Aladdin Ghostscript) After that you have to run the "SetupGS403.sh" from a shell within your X-Server or Cygwin. Then start LyX and exit. Now a "preferences" file is in your ".lyx" - Directory in your home directory. Insert the following line into the preferences file \ps_command "/apps/gs4.03/bin/gs" After that LyX should be able todisplay EPS files. For making or exporting dvi or ps you'll need to install the FULL MiKTeX 2.1 version. Otherwise there are several *.sty - files mising. You can download them from http://www.bestkevin.com/Download/various/sty/ After downloading and saving within your localtexmf directory you should run "initexmf -u". If you have set the PATH for MiKTeX binaries (C:\Programme\MiKTeX\miktex\bin) correctly then everything should work fine. It's very helpful to have a look at the latex - log - file. (View -- Latex logfile). There you can see whether are STY files or something is missing or not. Christoph
LyX + WinME + MikTeX --> Still the problem in installation is there. Anyone would please help? Thanx
- Original Message - From: Mostafa Modirrousta To: Saalfeld, Christoph ; LyX-Users (E-Mail) Sent: Friday, July 13, 2001 3:53 PM Subject: Re: LyX + WinME + MikTeX Hi Christoph, Thank you very much for your help. I got it much sooner but had to come home to try your points. Here is the outcome. My installation of LyX dates back to yesterday :) so quite up-to-date. I got the required files for LyX, put them in a dir and ran setup(from cygwin) and asked it to install from that dir and it recognized the existence of all packages except GS403 ! Now, I did the same to see if it would change anything and it did not recognize anything to be installed! Does the setup check to see if those packages are already installed or not? Then I manually installed the GS as you said. Excuse me if I am not that good in BASH, but how do I run a shell script like: SetupGS403.sh ? I tried a few ways and it didn't run :( Anyway, the main problem is to follow. When I installed MikTeX a few weeks ago, their setup program was not complete or for some other reason it did not allow me to do a full install, well when I asked it to do so, it just didn't find any FTP from which I could download so I did a fairly full install :) To be sure that it was not the problem with my case, I reinstalled MikTeX 2.1 today which worked fine and it is now a full full installation. BUT, the main problem is still there! I open LyX, it seems to be all right, I import a LaTeX file, it creates its own lyx version out of it and then it is the conversion time. I ask it to convert to DVI, PS, whatever, and it says it is doing it and done and so on and so forth (if I manually do not create the DVI (out of LyX), it complains when I ask to export to PS, because no DVI is there but if it is there, it says done and STILL nothing is produced, no DVI, no PS, no PDF. I am really clueless because it does not complain at all and does not give me a hint of what is missing. At first, when the original configuration was there, it did not find windvi which is normal and I changed it to YAP and it did no more complaints but it could not do the conversion either case! When I ask to view the dvi that I produced outside LyX, it searches for it in: c:\cygwin\tmp\lyx_tmpdir766193766193\lyx_tmpbuf0\1.dvi and not in: c:\MyFiles\LyX\doc\1.dvi and when I ask to export to DVI, it creates an EMPTY file in the tmp dir, 1.tex.dep PART II: As for the styles, first of all, I've to say that there has never been a LOG file in LyX! I guess it should be there when I try to export a DVI but under no circumstances, a log file was created! I also copied all those STY files and ran the initexmf -u but nothing changed. My PATH is all right because WinEdt does anything that it is supposed to do (latex, dvips, pdflatex, etc) without complaining. Anyone please could help me to see where I am going wrong? Thanks so much for all your attention, Christoph and others as well. Regards, m - Original Message - From: Saalfeld, Christoph To: 'Mostafa Modirrousta' ; LyX-Users (E-Mail) Sent: Thursday, July 12, 2001 11:51 PM Subject: RE: LyX + WinME + MikTeX If you download all the necessary files from the LyX for Win32 page (including the ghostscript4.03 - version there) there should be no problem. You can extract ghostscript manually by copying gs-4.03.tar.gz to your Cygwin root directory and executing "tar -xvzf gs-4.03.tar.gz". Of course you need a Ghostscript - Version too for Windows (try Aladdin Ghostscript) After that you have to run the "SetupGS403.sh" from a shell within your X-Server or Cygwin. Then start LyX and exit. Now a "preferences" file is in your ".lyx" - Directory in your home directory. Insert the following line into the preferences file \ps_command "/apps/gs4.03/bin/gs" After that LyX should be able to display EPS files. For making or exporting dvi or ps you'll need to install the FULL MiKTeX 2.1 version. Otherwise there are several *.sty - files mising. You can download them from http://www.bestkevin.com/Download/various/sty/ After downloading and saving within your localtexmf directory you should run "initexmf -u". If you have set the PATH for MiKTeX binaries (C:\Programme\MiKTeX\miktex\bin) correctly then everything should work fine. It's very helpful to have a look at the latex - log - file. (View --> Latex logfile). There you can see whether are STY files or something is missing or not. Christoph