RE: ACM SIG Proceedings

[Luigi Cerfeda]

Hi Scott, thank you for the reply.

I have only ACM-sigplan.lyx and ACM-siggrph.lyx but I think I need ACM-SIGS.lyx
(Are ACM-sigplan.lyx and ACM-SIGS.lyx the same ? :confused:)

However I can't compile ACM-sigplan.lyx because I have an error about 
sigplanconf.cls file,

Thanks :)

 Date: Sat, 3 Aug 2013 15:58:17 -0400
 Subject: Re: ACM SIG Proceedings
 From: skost...@princeton.edu
 To: luigi.cerf...@hotmail.it
 CC: lyx-users@lists.lyx.org
 
 On Sat, Aug 3, 2013 at 10:48 AM, cerf luigi.cerf...@hotmail.it wrote:
  Hi all, I am a newbie about Lyx, but I think it's a very good document
  processor (so  thank you for your work)
 
  I'm starting to write a paper that must be submitted in PDF format and
  conform to ACM SIG Proceedings specifications. Specifically I have to follow
  these templates available for Word, Word Perfect and LaTeX2e.
  http://www.acm.org/sigs/publications/proceedings-templates
 
  How I can use Lyx for my purpose?
  Can you help me to getting started ?
 
  P.S. I already have read some tutorials about Lyx.
 
  Maybe this thread has some informations about my problems but I haven't
  understood very well
 
  -ACM SIGs vs SIGPLAN (it's a good question for me)
  http://comments.gmane.org/gmane.editors.lyx.general/53583
 
 
 Hi,
 
 In LyX, go to File  New From Template
 Then select ACM-sigplan.lyx or ACM-SIGS.lyx
 
 Best,
 
 Scott
  

Re: ACM SIG Proceedings

[stefano franchi]

On Sun, Aug 4, 2013 at 7:37 AM, Luigi Cerfeda luigi.cerf...@hotmail.itwrote:

 Hi Scott, thank you for the reply.

 I have only *ACM-sigplan.lyx* and *ACM-siggrph.lyx* but I think I need *
 ACM-SIGS.lyx*
 (Are *ACM-sigplan.lyx *and* **ACM-SIGS.lyx *the same ? :confused:)


I don't know if they are the same, but you can download the class file for
sigplan here:

http://drupal.sigplan.org/sites/default/files/sigplanconf.cls

Also, you may want to take a look at the lyx wiki page for sigplan, it
explains what to do with the class file after you downloaded it:

http://wiki.lyx.org/Examples/AcmSigplan


Cheers,

Stefano



-- 
__
Stefano Franchi
Associate Research Professor
Department of Hispanic StudiesPh:   +1 (979) 845-2125
Texas AM University  Fax:  +1 (979) 845-6421
College Station, Texas, USA

stef...@tamu.edu
http://stefano.cleinias.org

RE: ACM SIG Proceedings

[Luigi Cerfeda]

Hi Scott, thank you for the reply.

I have only ACM-sigplan.lyx and ACM-siggrph.lyx but I think I need ACM-SIGS.lyx
(Are ACM-sigplan.lyx and ACM-SIGS.lyx the same ? :confused:)

However I can't compile ACM-sigplan.lyx because I have an error about 
sigplanconf.cls file,

Thanks :)

 Date: Sat, 3 Aug 2013 15:58:17 -0400
 Subject: Re: ACM SIG Proceedings
 From: skost...@princeton.edu
 To: luigi.cerf...@hotmail.it
 CC: lyx-users@lists.lyx.org
 
 On Sat, Aug 3, 2013 at 10:48 AM, cerf luigi.cerf...@hotmail.it wrote:
  Hi all, I am a newbie about Lyx, but I think it's a very good document
  processor (so  thank you for your work)
 
  I'm starting to write a paper that must be submitted in PDF format and
  conform to ACM SIG Proceedings specifications. Specifically I have to follow
  these templates available for Word, Word Perfect and LaTeX2e.
  http://www.acm.org/sigs/publications/proceedings-templates
 
  How I can use Lyx for my purpose?
  Can you help me to getting started ?
 
  P.S. I already have read some tutorials about Lyx.
 
  Maybe this thread has some informations about my problems but I haven't
  understood very well
 
  -ACM SIGs vs SIGPLAN (it's a good question for me)
  http://comments.gmane.org/gmane.editors.lyx.general/53583
 
 
 Hi,
 
 In LyX, go to File  New From Template
 Then select ACM-sigplan.lyx or ACM-SIGS.lyx
 
 Best,
 
 Scott
  

Re: ACM SIG Proceedings

[stefano franchi]

On Sun, Aug 4, 2013 at 7:37 AM, Luigi Cerfeda luigi.cerf...@hotmail.itwrote:

 Hi Scott, thank you for the reply.

 I have only *ACM-sigplan.lyx* and *ACM-siggrph.lyx* but I think I need *
 ACM-SIGS.lyx*
 (Are *ACM-sigplan.lyx *and* **ACM-SIGS.lyx *the same ? :confused:)


I don't know if they are the same, but you can download the class file for
sigplan here:

http://drupal.sigplan.org/sites/default/files/sigplanconf.cls

Also, you may want to take a look at the lyx wiki page for sigplan, it
explains what to do with the class file after you downloaded it:

http://wiki.lyx.org/Examples/AcmSigplan


Cheers,

Stefano



-- 
__
Stefano Franchi
Associate Research Professor
Department of Hispanic StudiesPh:   +1 (979) 845-2125
Texas AM University  Fax:  +1 (979) 845-6421
College Station, Texas, USA

stef...@tamu.edu
http://stefano.cleinias.org

RE: ACM SIG Proceedings

[Luigi Cerfeda]

Hi Scott, thank you for the reply.

I have only ACM-sigplan.lyx and ACM-siggrph.lyx but I think I need ACM-SIGS.lyx
(Are ACM-sigplan.lyx and ACM-SIGS.lyx the same ? :confused:)

However I can't compile ACM-sigplan.lyx because I have an error about 
sigplanconf.cls file,

Thanks :)

> Date: Sat, 3 Aug 2013 15:58:17 -0400
> Subject: Re: ACM SIG Proceedings
> From: skost...@princeton.edu
> To: luigi.cerf...@hotmail.it
> CC: lyx-users@lists.lyx.org
> 
> On Sat, Aug 3, 2013 at 10:48 AM, cerf <luigi.cerf...@hotmail.it> wrote:
> > Hi all, I am a newbie about Lyx, but I think it's a very good document
> > processor (so  thank you for your work)
> >
> > I'm starting to write a paper that must be submitted in PDF format and
> > conform to ACM SIG Proceedings specifications. Specifically I have to follow
> > these templates available for Word, Word Perfect and LaTeX2e.
> > http://www.acm.org/sigs/publications/proceedings-templates
> >
> > How I can use Lyx for my purpose?
> > Can you help me to getting started ?
> >
> > P.S. I already have read some tutorials about Lyx.
> >
> > Maybe this thread has some informations about my problems but I haven't
> > understood very well
> >
> > -ACM SIGs vs SIGPLAN (it's a good question for me)
> > http://comments.gmane.org/gmane.editors.lyx.general/53583
> >
> 
> Hi,
> 
> In LyX, go to File > New From Template
> Then select ACM-sigplan.lyx or ACM-SIGS.lyx
> 
> Best,
> 
> Scott
  

Re: ACM SIG Proceedings

[stefano franchi]

On Sun, Aug 4, 2013 at 7:37 AM, Luigi Cerfeda wrote:

> Hi Scott, thank you for the reply.
>
> I have only *ACM-sigplan.lyx* and *ACM-siggrph.lyx* but I think I need *
> ACM-SIGS.lyx*
> (Are *ACM-sigplan.lyx *and* **ACM-SIGS.lyx *the same ? :confused:)
>
>
I don't know if they are the same, but you can download the class file for
sigplan here:

http://drupal.sigplan.org/sites/default/files/sigplanconf.cls

Also, you may want to take a look at the lyx wiki page for sigplan, it
explains what to do with the class file after you downloaded it:

http://wiki.lyx.org/Examples/AcmSigplan


Cheers,

Stefano



-- 
__
Stefano Franchi
Associate Research Professor
Department of Hispanic StudiesPh:   +1 (979) 845-2125
Texas A University  Fax:  +1 (979) 845-6421
College Station, Texas, USA

stef...@tamu.edu
http://stefano.cleinias.org

Re: ACM SIG Proceedings

[Scott Kostyshak]

On Sat, Aug 3, 2013 at 10:48 AM, cerf luigi.cerf...@hotmail.it wrote:
 Hi all, I am a newbie about Lyx, but I think it's a very good document
 processor (so  thank you for your work)

 I'm starting to write a paper that must be submitted in PDF format and
 conform to ACM SIG Proceedings specifications. Specifically I have to follow
 these templates available for Word, Word Perfect and LaTeX2e.
 http://www.acm.org/sigs/publications/proceedings-templates

 How I can use Lyx for my purpose?
 Can you help me to getting started ?

 P.S. I already have read some tutorials about Lyx.

 Maybe this thread has some informations about my problems but I haven't
 understood very well

 -ACM SIGs vs SIGPLAN (it's a good question for me)
 http://comments.gmane.org/gmane.editors.lyx.general/53583


Hi,

In LyX, go to File  New From Template
Then select ACM-sigplan.lyx or ACM-SIGS.lyx

Best,

Scott

Re: ACM SIG Proceedings

[Scott Kostyshak]

On Sat, Aug 3, 2013 at 10:48 AM, cerf luigi.cerf...@hotmail.it wrote:
 Hi all, I am a newbie about Lyx, but I think it's a very good document
 processor (so  thank you for your work)

 I'm starting to write a paper that must be submitted in PDF format and
 conform to ACM SIG Proceedings specifications. Specifically I have to follow
 these templates available for Word, Word Perfect and LaTeX2e.
 http://www.acm.org/sigs/publications/proceedings-templates

 How I can use Lyx for my purpose?
 Can you help me to getting started ?

 P.S. I already have read some tutorials about Lyx.

 Maybe this thread has some informations about my problems but I haven't
 understood very well

 -ACM SIGs vs SIGPLAN (it's a good question for me)
 http://comments.gmane.org/gmane.editors.lyx.general/53583


Hi,

In LyX, go to File  New From Template
Then select ACM-sigplan.lyx or ACM-SIGS.lyx

Best,

Scott

Re: ACM SIG Proceedings

[Scott Kostyshak]

On Sat, Aug 3, 2013 at 10:48 AM, cerf  wrote:
> Hi all, I am a newbie about Lyx, but I think it's a very good document
> processor (so  thank you for your work)
>
> I'm starting to write a paper that must be submitted in PDF format and
> conform to ACM SIG Proceedings specifications. Specifically I have to follow
> these templates available for Word, Word Perfect and LaTeX2e.
> http://www.acm.org/sigs/publications/proceedings-templates
>
> How I can use Lyx for my purpose?
> Can you help me to getting started ?
>
> P.S. I already have read some tutorials about Lyx.
>
> Maybe this thread has some informations about my problems but I haven't
> understood very well
>
> -ACM SIGs vs SIGPLAN (it's a good question for me)
> http://comments.gmane.org/gmane.editors.lyx.general/53583
>

Hi,

In LyX, go to File > New From Template
Then select ACM-sigplan.lyx or ACM-SIGS.lyx

Best,

Scott

Re: ACM SIGPLAN class and template: problem with terms keywords

[Julien Rioux]

On 21/10/2012 2:51 AM, Gabi Kedma wrote:

Hi,
I have the following problem:
I am working with the ACM sigplan class and template.
It requires me to specify both 'General Terms' and 'Keywords'.
The template uses:
\begin_layout Terms
and
\begin_layout Keywords
However, when I convert this to PDF, both appear on the PDF as 'General
Terms'.
(It shows 'General Terms' twice, once with the terms, and once with the
keywords).
What should I do to solve this problem?
Thanks,
Gabi


This has been corrected: http://www.lyx.org/trac/ticket/8378
--
Julien

Re: ACM SIGPLAN class and template: problem with terms keywords

[Julien Rioux]

On 21/10/2012 2:51 AM, Gabi Kedma wrote:

Hi,
I have the following problem:
I am working with the ACM sigplan class and template.
It requires me to specify both 'General Terms' and 'Keywords'.
The template uses:
\begin_layout Terms
and
\begin_layout Keywords
However, when I convert this to PDF, both appear on the PDF as 'General
Terms'.
(It shows 'General Terms' twice, once with the terms, and once with the
keywords).
What should I do to solve this problem?
Thanks,
Gabi


This has been corrected: http://www.lyx.org/trac/ticket/8378
--
Julien

Re: ACM SIGPLAN class and template: problem with terms & keywords

[Julien Rioux]

On 21/10/2012 2:51 AM, Gabi Kedma wrote:

Hi,
I have the following problem:
I am working with the ACM sigplan class and template.
It requires me to specify both 'General Terms' and 'Keywords'.
The template uses:
\begin_layout Terms
and
\begin_layout Keywords
However, when I convert this to PDF, both appear on the PDF as 'General
Terms'.
(It shows 'General Terms' twice, once with the terms, and once with the
keywords).
What should I do to solve this problem?
Thanks,
Gabi


This has been corrected: http://www.lyx.org/trac/ticket/8378
--
Julien

Re: ACM SIGs vs SIGPLAN

[Uwe Stöhr]

Alexy Khrabrov schrieb:

Greetings -- I'm typesetting a paper for ACM SIGKDD, and found ACM 
SIGPLAN style by George Fairbanks, now in the latest LyX 1.6.1, 
described on the wiki at


http://wiki.lyx.org/Examples/AcmSigplan

 -- which refers to the ACM SIGPLAN's own

http://www.sigplan.org/authorInformation.htm

However, SIGKDD refers to a general SIGs format at

http://www.acm.org/sigs/publications/proceedings-templates


Interesting point. I wrote the LyX layout file for ACMSigplan because a user requested this. 
ACMSigplan is a LaTeX class for conference submissions of this special SIG while it seems that ACM 
SIG is the class file for general proceeding submissions.


So the general class file is this one:
http://www.acm.org/sigs/publications/proceedings-templates
while the general ACM class file is this one:
http://www.acm.org/publications/latex_style

wile some SIGs have its own class file. This is besides SIGPlan also SIGGraph. I wrote a LyX layout 
file for ACMSIGGRAPH:

http://wiki.lyx.org/Examples/AcmSiggraph
that will be part of tzhe next release LyX 1.6.2.

I think that you will have to use the general SIG class. I can write a LyX layout file for this. But 
can you please contact the SIG people if it is for now also OK to submit your paper using the 
SIGPlan or SIGGraph calss file that is already supported by LyX and report me what they say?


regards Uwe

Re: ACM SIGs vs SIGPLAN

[Uwe Stöhr]

Alexy Khrabrov schrieb:

Greetings -- I'm typesetting a paper for ACM SIGKDD, and found ACM 
SIGPLAN style by George Fairbanks, now in the latest LyX 1.6.1, 
described on the wiki at


http://wiki.lyx.org/Examples/AcmSigplan

 -- which refers to the ACM SIGPLAN's own

http://www.sigplan.org/authorInformation.htm

However, SIGKDD refers to a general SIGs format at

http://www.acm.org/sigs/publications/proceedings-templates


Interesting point. I wrote the LyX layout file for ACMSigplan because a user requested this. 
ACMSigplan is a LaTeX class for conference submissions of this special SIG while it seems that ACM 
SIG is the class file for general proceeding submissions.


So the general class file is this one:
http://www.acm.org/sigs/publications/proceedings-templates
while the general ACM class file is this one:
http://www.acm.org/publications/latex_style

wile some SIGs have its own class file. This is besides SIGPlan also SIGGraph. I wrote a LyX layout 
file for ACMSIGGRAPH:

http://wiki.lyx.org/Examples/AcmSiggraph
that will be part of tzhe next release LyX 1.6.2.

I think that you will have to use the general SIG class. I can write a LyX layout file for this. But 
can you please contact the SIG people if it is for now also OK to submit your paper using the 
SIGPlan or SIGGraph calss file that is already supported by LyX and report me what they say?


regards Uwe

Re: ACM SIGs vs SIGPLAN

[Uwe Stöhr]

Alexy Khrabrov schrieb:

Greetings -- I'm typesetting a paper for ACM SIGKDD, and found ACM 
SIGPLAN style by George Fairbanks, now in the latest LyX 1.6.1, 
described on the wiki at


http://wiki.lyx.org/Examples/AcmSigplan

 -- which refers to the ACM SIGPLAN's own

http://www.sigplan.org/authorInformation.htm

However, SIGKDD refers to a general SIGs format at

http://www.acm.org/sigs/publications/proceedings-templates


Interesting point. I wrote the LyX layout file for ACMSigplan because a user requested this. 
ACMSigplan is a LaTeX class for conference submissions of this special SIG while it seems that ACM 
SIG is the class file for general proceeding submissions.


So the general class file is this one:
http://www.acm.org/sigs/publications/proceedings-templates
while the general ACM class file is this one:
http://www.acm.org/publications/latex_style

wile some SIGs have its own class file. This is besides SIGPlan also SIGGraph. I wrote a LyX layout 
file for ACMSIGGRAPH:

http://wiki.lyx.org/Examples/AcmSiggraph
that will be part of tzhe next release LyX 1.6.2.

I think that you will have to use the general SIG class. I can write a LyX layout file for this. But 
can you please contact the SIG people if it is for now also OK to submit your paper using the 
SIGPlan or SIGGraph calss file that is already supported by LyX and report me what they say?


regards Uwe

Re: ACM Sigplan layout

[Richard Heck]

Julio Rojas wrote:

Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX fails
to add an empty line between the \authorinfo{} and the \maketitle. It
seems that just one empty line between them is not enough and you need
two empry lines between them. I'm attaching the short LyX document and
both, the correct LaTeX code and the incorrect one (generated by LyX).

Should I report it as a bug?

  

I would suppose so, yes.

rh

Re: ACM Sigplan layout

[Jean-Marc Lasgouttes]

Julio Rojas [EMAIL PROTECTED] writes:
 I'm attaching the short LyX document and
 both, the correct LaTeX code and the incorrect one (generated by LyX).

The two TeX files look identical to me...

JMarc

Re: ACM Sigplan layout

[Julio Rojas]

Except for the extra empty line between the two blocks.
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
 Julio Rojas [EMAIL PROTECTED] writes:
 I'm attaching the short LyX document and
 both, the correct LaTeX code and the incorrect one (generated by LyX).

 The two TeX files look identical to me...

 JMarc

Re: ACM Sigplan layout

[Julio Rojas]

Yup, you are right. Find included the correct version of the incorrect
document. :D
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
 Julio Rojas [EMAIL PROTECTED] writes:
 I'm attaching the short LyX document and
 both, the correct LaTeX code and the incorrect one (generated by LyX).

 The two TeX files look identical to me...

 JMarc



latex_incorrect.tex
Description: TeX document

Re: ACM Sigplan layout

[Uwe Stöhr]

Julio Rojas schrieb:


Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown.


Because ACM is a conference class. So you have to specify the conference 
as I did in the attached file.


LyX 1.5.7 and 1.6.0 ships an the template file ACM-sigplan.lyx, so I 
recommend to use this file to start.


regards Uwe


ACMSigplan Testing.lyx
Description: application/lyx

Re: ACM Sigplan layout

[Julio Rojas]

The problem was the lack of the three }{ needed in the author
environment. Can this be solved adding the extra empty line when the
author only has a name but no afiliation or email?
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:24 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 Hi, I was testing the ACM Sigplan layout with a very basic document:
 Title, author and some text. I rendered the PDF and only the text was
 shown.

 Because ACM is a conference class. So you have to specify the conference as
 I did in the attached file.

 LyX 1.5.7 and 1.6.0 ships an the template file ACM-sigplan.lyx, so I
 recommend to use this file to start.

 regards Uwe

Re: ACM Sigplan layout

[Richard Heck]

Julio Rojas wrote:

Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX fails
to add an empty line between the \authorinfo{} and the \maketitle. It
seems that just one empty line between them is not enough and you need
two empry lines between them. I'm attaching the short LyX document and
both, the correct LaTeX code and the incorrect one (generated by LyX).

Should I report it as a bug?

  

I would suppose so, yes.

rh

Re: ACM Sigplan layout

[Jean-Marc Lasgouttes]

Julio Rojas [EMAIL PROTECTED] writes:
 I'm attaching the short LyX document and
 both, the correct LaTeX code and the incorrect one (generated by LyX).

The two TeX files look identical to me...

JMarc

Re: ACM Sigplan layout

[Julio Rojas]

Except for the extra empty line between the two blocks.
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
 Julio Rojas [EMAIL PROTECTED] writes:
 I'm attaching the short LyX document and
 both, the correct LaTeX code and the incorrect one (generated by LyX).

 The two TeX files look identical to me...

 JMarc

Re: ACM Sigplan layout

[Julio Rojas]

Yup, you are right. Find included the correct version of the incorrect
document. :D
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
[EMAIL PROTECTED] wrote:
 Julio Rojas [EMAIL PROTECTED] writes:
 I'm attaching the short LyX document and
 both, the correct LaTeX code and the incorrect one (generated by LyX).

 The two TeX files look identical to me...

 JMarc



latex_incorrect.tex
Description: TeX document

Re: ACM Sigplan layout

[Uwe Stöhr]

Julio Rojas schrieb:


Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown.


Because ACM is a conference class. So you have to specify the conference 
as I did in the attached file.


LyX 1.5.7 and 1.6.0 ships an the template file ACM-sigplan.lyx, so I 
recommend to use this file to start.


regards Uwe


ACMSigplan Testing.lyx
Description: application/lyx

Re: ACM Sigplan layout

[Julio Rojas]

The problem was the lack of the three }{ needed in the author
environment. Can this be solved adding the extra empty line when the
author only has a name but no afiliation or email?
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:24 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 Hi, I was testing the ACM Sigplan layout with a very basic document:
 Title, author and some text. I rendered the PDF and only the text was
 shown.

 Because ACM is a conference class. So you have to specify the conference as
 I did in the attached file.

 LyX 1.5.7 and 1.6.0 ships an the template file ACM-sigplan.lyx, so I
 recommend to use this file to start.

 regards Uwe

Re: ACM Sigplan layout

[Richard Heck]

Julio Rojas wrote:

Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown. While comparing the LaTeX code generated by LyX with this basic
document and the one using the included template, I saw that LyX fails
to add an empty line between the \authorinfo{} and the \maketitle. It
seems that just one empty line between them is not enough and you need
two empry lines between them. I'm attaching the short LyX document and
both, the correct LaTeX code and the incorrect one (generated by LyX).

Should I report it as a bug?

  

I would suppose so, yes.

rh

Re: ACM Sigplan layout

[Jean-Marc Lasgouttes]

"Julio Rojas" <[EMAIL PROTECTED]> writes:
> I'm attaching the short LyX document and
> both, the correct LaTeX code and the incorrect one (generated by LyX).

The two TeX files look identical to me...

JMarc

Re: ACM Sigplan layout

[Julio Rojas]

Except for the extra empty line between the two blocks.
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
<[EMAIL PROTECTED]> wrote:
> "Julio Rojas" <[EMAIL PROTECTED]> writes:
>> I'm attaching the short LyX document and
>> both, the correct LaTeX code and the incorrect one (generated by LyX).
>
> The two TeX files look identical to me...
>
> JMarc
>

Re: ACM Sigplan layout

[Julio Rojas]

Yup, you are right. Find included the correct version of the incorrect
document. :D
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:02 PM, Jean-Marc Lasgouttes
<[EMAIL PROTECTED]> wrote:
> "Julio Rojas" <[EMAIL PROTECTED]> writes:
>> I'm attaching the short LyX document and
>> both, the correct LaTeX code and the incorrect one (generated by LyX).
>
> The two TeX files look identical to me...
>
> JMarc
>


latex_incorrect.tex
Description: TeX document

Re: ACM Sigplan layout

[Uwe Stöhr]

Julio Rojas schrieb:


Hi, I was testing the ACM Sigplan layout with a very basic document:
Title, author and some text. I rendered the PDF and only the text was
shown.


Because ACM is a conference class. So you have to specify the conference 
as I did in the attached file.


LyX 1.5.7 and 1.6.0 ships an the template file ACM-sigplan.lyx, so I 
recommend to use this file to start.


regards Uwe


ACMSigplan Testing.lyx
Description: application/lyx

Re: ACM Sigplan layout

[Julio Rojas]

The problem was the lack of the three "}{" needed in the author
environment. Can this be solved adding the extra empty line when the
author only has a name but no afiliation or email?
-
Julio Rojas
[EMAIL PROTECTED]



On Fri, Nov 14, 2008 at 5:24 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Julio Rojas schrieb:
>
>> Hi, I was testing the ACM Sigplan layout with a very basic document:
>> Title, author and some text. I rendered the PDF and only the text was
>> shown.
>
> Because ACM is a conference class. So you have to specify the conference as
> I did in the attached file.
>
> LyX 1.5.7 and 1.6.0 ships an the template file ACM-sigplan.lyx, so I
> recommend to use this file to start.
>
> regards Uwe
>

Re: ACM

[Julio Rojas]

And do you know the launching date for RC4?
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 12:37 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 The document class sigplanconf could not be loaded.

 I've no other explanation than that you haven't correctly installed the
 document class to MiKTeX.

 It seems like a LyX can't read the layout. Any ideas?

 No. But you should try again when LyX 1.6.0RC4 comes out.

 regards Uwe

Re: ACM - solution

[Julio Rojas]

But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 2:07 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Uwe Stöhr schrieb:

 I've no other explanation than that you haven't correctly installed the
 document class to MiKTeX.

 I know now what your problem is. You are using LyX 1.6.0RC3, but the layout
 file you can download from the Wiki page, is for LyX 1.5.x and not for LyX
 1.6. (I designed it after RC3 was released and in the meantime we changed
 the layout file format and the needed conversions scripts are therefore not
 in RC3.
 With the next LyX 1.6 test release we ship a ACM-layout that works for LyX
 1.6.

 So it should work when you use lyX 1.5.6.

 regards Uwe

Re: ACM - solution

[Uwe Stöhr]

Julio Rojas schrieb:


But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.


Also with LyX 1.5.6?

Uwe

Re: ACM - solution

[Julio Rojas]

No, what I mean is that on both Vista and Linux I have RC3. I will try
with 1.5.6 on Vista, but I will have to export the file first.
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 2:37 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.

 Also with LyX 1.5.6?

 Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


The document class sigplanconf could not be loaded.


I've no other explanation than that you haven't correctly installed the 
document class to MiKTeX.


It seems like a LyX can't read the layout. Any ideas?


No. But you should try again when LyX 1.6.0RC4 comes out.

regards Uwe

Re: ACM - solution

[Uwe Stöhr]

Uwe Stöhr schrieb:

I've no other explanation than that you haven't correctly installed the 
document class to MiKTeX.


I know now what your problem is. You are using LyX 1.6.0RC3, but the layout file you can download 
from the Wiki page, is for LyX 1.5.x and not for LyX 1.6. (I designed it after RC3 was released and 
in the meantime we changed the layout file format and the needed conversions scripts are therefore 
not in RC3.

With the next LyX 1.6 test release we ship a ACM-layout that works for LyX 1.6.

So it should work when you use lyX 1.5.6.

regards Uwe

Re: ACM

[Julio Rojas]

And do you know the launching date for RC4?
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 12:37 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 The document class sigplanconf could not be loaded.

 I've no other explanation than that you haven't correctly installed the
 document class to MiKTeX.

 It seems like a LyX can't read the layout. Any ideas?

 No. But you should try again when LyX 1.6.0RC4 comes out.

 regards Uwe

Re: ACM - solution

[Julio Rojas]

But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 2:07 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Uwe Stöhr schrieb:

 I've no other explanation than that you haven't correctly installed the
 document class to MiKTeX.

 I know now what your problem is. You are using LyX 1.6.0RC3, but the layout
 file you can download from the Wiki page, is for LyX 1.5.x and not for LyX
 1.6. (I designed it after RC3 was released and in the meantime we changed
 the layout file format and the needed conversions scripts are therefore not
 in RC3.
 With the next LyX 1.6 test release we ship a ACM-layout that works for LyX
 1.6.

 So it should work when you use lyX 1.5.6.

 regards Uwe

Re: ACM - solution

[Uwe Stöhr]

Julio Rojas schrieb:


But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.


Also with LyX 1.5.6?

Uwe

Re: ACM - solution

[Julio Rojas]

No, what I mean is that on both Vista and Linux I have RC3. I will try
with 1.5.6 on Vista, but I will have to export the file first.
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 2:37 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.

 Also with LyX 1.5.6?

 Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


The document class sigplanconf could not be loaded.


I've no other explanation than that you haven't correctly installed the 
document class to MiKTeX.


It seems like a LyX can't read the layout. Any ideas?


No. But you should try again when LyX 1.6.0RC4 comes out.

regards Uwe

Re: ACM - solution

[Uwe Stöhr]

Uwe Stöhr schrieb:

I've no other explanation than that you haven't correctly installed the 
document class to MiKTeX.


I know now what your problem is. You are using LyX 1.6.0RC3, but the layout file you can download 
from the Wiki page, is for LyX 1.5.x and not for LyX 1.6. (I designed it after RC3 was released and 
in the meantime we changed the layout file format and the needed conversions scripts are therefore 
not in RC3.

With the next LyX 1.6 test release we ship a ACM-layout that works for LyX 1.6.

So it should work when you use lyX 1.5.6.

regards Uwe

Re: ACM

[Julio Rojas]

And do you know the launching date for RC4?
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 12:37 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Julio Rojas schrieb:
>
>> The document class sigplanconf could not be loaded.
>
> I've no other explanation than that you haven't correctly installed the
> document class to MiKTeX.
>
>> It seems like a LyX can't read the layout. Any ideas?
>
> No. But you should try again when LyX 1.6.0RC4 comes out.
>
> regards Uwe
>

Re: ACM - solution

[Julio Rojas]

But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 2:07 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Uwe Stöhr schrieb:
>
>> I've no other explanation than that you haven't correctly installed the
>> document class to MiKTeX.
>
> I know now what your problem is. You are using LyX 1.6.0RC3, but the layout
> file you can download from the Wiki page, is for LyX 1.5.x and not for LyX
> 1.6. (I designed it after RC3 was released and in the meantime we changed
> the layout file format and the needed conversions scripts are therefore not
> in RC3.
> With the next LyX 1.6 test release we ship a ACM-layout that works for LyX
> 1.6.
>
> So it should work when you use lyX 1.5.6.
>
> regards Uwe
>

Re: ACM - solution

[Uwe Stöhr]

Julio Rojas schrieb:


But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.


Also with LyX 1.5.6?

Uwe

Re: ACM - solution

[Julio Rojas]

No, what I mean is that on both Vista and Linux I have RC3. I will try
with 1.5.6 on Vista, but I will have to export the file first.
-
Julio Rojas
[EMAIL PROTECTED]



On Thu, Oct 16, 2008 at 2:37 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Julio Rojas schrieb:
>
>> But I only have this problem in Vista/MikTeX, not in Ubuntu/TeXLive.
>
> Also with LyX 1.5.6?
>
> Uwe
>

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


The document class sigplanconf could not be loaded.


I've no other explanation than that you haven't correctly installed the 
document class to MiKTeX.


It seems like a LyX can't read the layout. Any ideas?


No. But you should try again when LyX 1.6.0RC4 comes out.

regards Uwe

Re: ACM - solution

[Uwe Stöhr]

Uwe Stöhr schrieb:

I've no other explanation than that you haven't correctly installed the 
document class to MiKTeX.


I know now what your problem is. You are using LyX 1.6.0RC3, but the layout file you can download 
from the Wiki page, is for LyX 1.5.x and not for LyX 1.6. (I designed it after RC3 was released and 
in the meantime we changed the layout file format and the needed conversions scripts are therefore 
not in RC3.

With the next LyX 1.6 test release we ship a ACM-layout that works for LyX 1.6.

So it should work when you use lyX 1.5.6.

regards Uwe

Re: ACM

[Julio Rojas]

Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
matter of fact, I had a bad problem with my texlive installation, due
to some files left over the /etc/texmf/updmap.d folder that didn't let
me make the upgrades needed to render the PDF. I have solved the
problem of the fonts and I will download the new version of the
layout.

The only worrying point is that LyX never reported the fonts problem
while rendering the PDF. The PDF was rendered, but as the file sent to
the list show, it was badly generated. I tried compiling the tex file
by hand and the fonts problem was shown as messages. Why could this
happen?
-
Julio Rojas
[EMAIL PROTECTED]



On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.

 I cannot reproduce this. All output formats are OK, seems that your LaTeX
 system has a problem.

 Why do you think this is related to tex2lyx? You haven't used tex2lyx and
 tex2lyx is a program of its own.

 I just updated the layout and template file you find at
 http://wiki.lyx.org/Examples/AcmSigplan
 So try out again using these files. Note that they are for LyX 1.5.6, not
 LyX 1.6 test releases.

 regards Uwe

Re: ACM

[Julio Rojas]

I have moved from my Ubuntu PC where everything was alright to my
Vista PC. I installed the class file and the LyX layout. Reconfigured
LyX, reconfigured MikTeX and when I try to open my file a message
appears telling me:

The document class sigplanconf could not be loaded.

If I try to manually set the class (via Document - Configuration) to
ACM SIGPLAN, the same message is presented and another one that says:

Unable to set the document class.

Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 2:46 PM, Julio Rojas [EMAIL PROTECTED] wrote:
 BTW, while using this layout I could see that inserting a Keywords
 environment inserts a Topics environment instead.
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Wed, Oct 15, 2008 at 10:00 AM, Julio Rojas [EMAIL PROTECTED] wrote:
 Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
 matter of fact, I had a bad problem with my texlive installation, due
 to some files left over the /etc/texmf/updmap.d folder that didn't let
 me make the upgrades needed to render the PDF. I have solved the
 problem of the fonts and I will download the new version of the
 layout.

 The only worrying point is that LyX never reported the fonts problem
 while rendering the PDF. The PDF was rendered, but as the file sent to
 the list show, it was badly generated. I tried compiling the tex file
 by hand and the fonts problem was shown as messages. Why could this
 happen?
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.

 I cannot reproduce this. All output formats are OK, seems that your LaTeX
 system has a problem.

 Why do you think this is related to tex2lyx? You haven't used tex2lyx and
 tex2lyx is a program of its own.

 I just updated the layout and template file you find at
 http://wiki.lyx.org/Examples/AcmSigplan
 So try out again using these files. Note that they are for LyX 1.5.6, not
 LyX 1.6 test releases.

 regards Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


I have moved from my Ubuntu PC where everything was alright to my
Vista PC. I installed the class file and the LyX layout. Reconfigured
LyX, reconfigured MikTeX


You need to do the opposite: First refresh MiKTeX's file name databasse, then 
reconfigure LyX.


Any ideas?


Nothing further.

regards Uwe

Re: ACM

[Julio Rojas]

BTW, while using this layout I could see that inserting a Keywords
environment inserts a Topics environment instead.
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 10:00 AM, Julio Rojas [EMAIL PROTECTED] wrote:
 Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
 matter of fact, I had a bad problem with my texlive installation, due
 to some files left over the /etc/texmf/updmap.d folder that didn't let
 me make the upgrades needed to render the PDF. I have solved the
 problem of the fonts and I will download the new version of the
 layout.

 The only worrying point is that LyX never reported the fonts problem
 while rendering the PDF. The PDF was rendered, but as the file sent to
 the list show, it was badly generated. I tried compiling the tex file
 by hand and the fonts problem was shown as messages. Why could this
 happen?
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.

 I cannot reproduce this. All output formats are OK, seems that your LaTeX
 system has a problem.

 Why do you think this is related to tex2lyx? You haven't used tex2lyx and
 tex2lyx is a program of its own.

 I just updated the layout and template file you find at
 http://wiki.lyx.org/Examples/AcmSigplan
 So try out again using these files. Note that they are for LyX 1.5.6, not
 LyX 1.6 test releases.

 regards Uwe

Re: ACM

[Julio Rojas]

Done and still the same problem. Removed files, reconfigures, added
the files and reconfigured in the correct secuence and still the same
problem.
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 6:56 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 I have moved from my Ubuntu PC where everything was alright to my
 Vista PC. I installed the class file and the LyX layout. Reconfigured
 LyX, reconfigured MikTeX

 You need to do the opposite: First refresh MiKTeX's file name databasse,
 then reconfigure LyX.

 Any ideas?

 Nothing further.

 regards Uwe

Re: ACM

[Julio Rojas]

This is the ouput generated by LyX:

Unable to convert C:/Program Files/LyX
1.6.0rc3/bin/../Resources/layouts/sigplanconf.layout to format 8
Error reading `[layouts/sigplanconf.layout]'
(Check `sigplanconf')
Check your installation and try Options/Reconfigure...
Error: Could not load class

The document class sigplanconf could not be loaded.
Error: Error

Unable to set document class.

It seems like a LyX can't read the layout. Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 9:49 PM, Julio Rojas [EMAIL PROTECTED] wrote:
 Done and still the same problem. Removed files, reconfigures, added
 the files and reconfigured in the correct secuence and still the same
 problem.
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Wed, Oct 15, 2008 at 6:56 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 I have moved from my Ubuntu PC where everything was alright to my
 Vista PC. I installed the class file and the LyX layout. Reconfigured
 LyX, reconfigured MikTeX

 You need to do the opposite: First refresh MiKTeX's file name databasse,
 then reconfigure LyX.

 Any ideas?

 Nothing further.

 regards Uwe

Re: ACM

[Julio Rojas]

Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
matter of fact, I had a bad problem with my texlive installation, due
to some files left over the /etc/texmf/updmap.d folder that didn't let
me make the upgrades needed to render the PDF. I have solved the
problem of the fonts and I will download the new version of the
layout.

The only worrying point is that LyX never reported the fonts problem
while rendering the PDF. The PDF was rendered, but as the file sent to
the list show, it was badly generated. I tried compiling the tex file
by hand and the fonts problem was shown as messages. Why could this
happen?
-
Julio Rojas
[EMAIL PROTECTED]



On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.

 I cannot reproduce this. All output formats are OK, seems that your LaTeX
 system has a problem.

 Why do you think this is related to tex2lyx? You haven't used tex2lyx and
 tex2lyx is a program of its own.

 I just updated the layout and template file you find at
 http://wiki.lyx.org/Examples/AcmSigplan
 So try out again using these files. Note that they are for LyX 1.5.6, not
 LyX 1.6 test releases.

 regards Uwe

Re: ACM

[Julio Rojas]

I have moved from my Ubuntu PC where everything was alright to my
Vista PC. I installed the class file and the LyX layout. Reconfigured
LyX, reconfigured MikTeX and when I try to open my file a message
appears telling me:

The document class sigplanconf could not be loaded.

If I try to manually set the class (via Document - Configuration) to
ACM SIGPLAN, the same message is presented and another one that says:

Unable to set the document class.

Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 2:46 PM, Julio Rojas [EMAIL PROTECTED] wrote:
 BTW, while using this layout I could see that inserting a Keywords
 environment inserts a Topics environment instead.
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Wed, Oct 15, 2008 at 10:00 AM, Julio Rojas [EMAIL PROTECTED] wrote:
 Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
 matter of fact, I had a bad problem with my texlive installation, due
 to some files left over the /etc/texmf/updmap.d folder that didn't let
 me make the upgrades needed to render the PDF. I have solved the
 problem of the fonts and I will download the new version of the
 layout.

 The only worrying point is that LyX never reported the fonts problem
 while rendering the PDF. The PDF was rendered, but as the file sent to
 the list show, it was badly generated. I tried compiling the tex file
 by hand and the fonts problem was shown as messages. Why could this
 happen?
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.

 I cannot reproduce this. All output formats are OK, seems that your LaTeX
 system has a problem.

 Why do you think this is related to tex2lyx? You haven't used tex2lyx and
 tex2lyx is a program of its own.

 I just updated the layout and template file you find at
 http://wiki.lyx.org/Examples/AcmSigplan
 So try out again using these files. Note that they are for LyX 1.5.6, not
 LyX 1.6 test releases.

 regards Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


I have moved from my Ubuntu PC where everything was alright to my
Vista PC. I installed the class file and the LyX layout. Reconfigured
LyX, reconfigured MikTeX


You need to do the opposite: First refresh MiKTeX's file name databasse, then 
reconfigure LyX.


Any ideas?


Nothing further.

regards Uwe

Re: ACM

[Julio Rojas]

BTW, while using this layout I could see that inserting a Keywords
environment inserts a Topics environment instead.
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 10:00 AM, Julio Rojas [EMAIL PROTECTED] wrote:
 Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
 matter of fact, I had a bad problem with my texlive installation, due
 to some files left over the /etc/texmf/updmap.d folder that didn't let
 me make the upgrades needed to render the PDF. I have solved the
 problem of the fonts and I will download the new version of the
 layout.

 The only worrying point is that LyX never reported the fonts problem
 while rendering the PDF. The PDF was rendered, but as the file sent to
 the list show, it was badly generated. I tried compiling the tex file
 by hand and the fonts problem was shown as messages. Why could this
 happen?
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.

 I cannot reproduce this. All output formats are OK, seems that your LaTeX
 system has a problem.

 Why do you think this is related to tex2lyx? You haven't used tex2lyx and
 tex2lyx is a program of its own.

 I just updated the layout and template file you find at
 http://wiki.lyx.org/Examples/AcmSigplan
 So try out again using these files. Note that they are for LyX 1.5.6, not
 LyX 1.6 test releases.

 regards Uwe

Re: ACM

[Julio Rojas]

Done and still the same problem. Removed files, reconfigures, added
the files and reconfigured in the correct secuence and still the same
problem.
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 6:56 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 I have moved from my Ubuntu PC where everything was alright to my
 Vista PC. I installed the class file and the LyX layout. Reconfigured
 LyX, reconfigured MikTeX

 You need to do the opposite: First refresh MiKTeX's file name databasse,
 then reconfigure LyX.

 Any ideas?

 Nothing further.

 regards Uwe

Re: ACM

[Julio Rojas]

This is the ouput generated by LyX:

Unable to convert C:/Program Files/LyX
1.6.0rc3/bin/../Resources/layouts/sigplanconf.layout to format 8
Error reading `[layouts/sigplanconf.layout]'
(Check `sigplanconf')
Check your installation and try Options/Reconfigure...
Error: Could not load class

The document class sigplanconf could not be loaded.
Error: Error

Unable to set document class.

It seems like a LyX can't read the layout. Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 9:49 PM, Julio Rojas [EMAIL PROTECTED] wrote:
 Done and still the same problem. Removed files, reconfigures, added
 the files and reconfigured in the correct secuence and still the same
 problem.
 -
 Julio Rojas
 [EMAIL PROTECTED]



 On Wed, Oct 15, 2008 at 6:56 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 Julio Rojas schrieb:

 I have moved from my Ubuntu PC where everything was alright to my
 Vista PC. I installed the class file and the LyX layout. Reconfigured
 LyX, reconfigured MikTeX

 You need to do the opposite: First refresh MiKTeX's file name databasse,
 then reconfigure LyX.

 Any ideas?

 Nothing further.

 regards Uwe

Re: ACM

[Julio Rojas]

Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
matter of fact, I had a bad problem with my texlive installation, due
to some files left over the /etc/texmf/updmap.d folder that didn't let
me make the upgrades needed to render the PDF. I have solved the
problem of the fonts and I will download the new version of the
layout.

The only worrying point is that LyX never reported the fonts problem
while rendering the PDF. The PDF was rendered, but as the file sent to
the list show, it was badly generated. I tried compiling the tex file
by hand and the fonts problem was shown as messages. Why could this
happen?
-
Julio Rojas
[EMAIL PROTECTED]



On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Julio Rojas schrieb:
>
>> BTW, I'm using the ACM Sigplan layout and something weird, that can be
>> related to the problem with tex2lyx, is happening. Whe compiling the
>> sample document or just a basic document, no errors are produced but
>> the PDF/DVI document seems to lack the fonts needed.
>
> I cannot reproduce this. All output formats are OK, seems that your LaTeX
> system has a problem.
>
> Why do you think this is related to tex2lyx? You haven't used tex2lyx and
> tex2lyx is a program of its own.
>
> I just updated the layout and template file you find at
> http://wiki.lyx.org/Examples/AcmSigplan
> So try out again using these files. Note that they are for LyX 1.5.6, not
> LyX 1.6 test releases.
>
> regards Uwe
>

Re: ACM

[Julio Rojas]

I have moved from my Ubuntu PC where everything was alright to my
Vista PC. I installed the class file and the LyX layout. Reconfigured
LyX, reconfigured MikTeX and when I try to open my file a message
appears telling me:

The document class sigplanconf could not be loaded.

If I try to manually set the class (via Document -> Configuration) to
ACM SIGPLAN, the same message is presented and another one that says:

Unable to set the document class.

Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 2:46 PM, Julio Rojas <[EMAIL PROTECTED]> wrote:
> BTW, while using this layout I could see that inserting a Keywords
> environment inserts a Topics environment instead.
> -
> Julio Rojas
> [EMAIL PROTECTED]
>
>
>
> On Wed, Oct 15, 2008 at 10:00 AM, Julio Rojas <[EMAIL PROTECTED]> wrote:
>> Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
>> matter of fact, I had a bad problem with my texlive installation, due
>> to some files left over the /etc/texmf/updmap.d folder that didn't let
>> me make the upgrades needed to render the PDF. I have solved the
>> problem of the fonts and I will download the new version of the
>> layout.
>>
>> The only worrying point is that LyX never reported the fonts problem
>> while rendering the PDF. The PDF was rendered, but as the file sent to
>> the list show, it was badly generated. I tried compiling the tex file
>> by hand and the fonts problem was shown as messages. Why could this
>> happen?
>> -
>> Julio Rojas
>> [EMAIL PROTECTED]
>>
>>
>>
>> On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
>>> Julio Rojas schrieb:
>>>
 BTW, I'm using the ACM Sigplan layout and something weird, that can be
 related to the problem with tex2lyx, is happening. Whe compiling the
 sample document or just a basic document, no errors are produced but
 the PDF/DVI document seems to lack the fonts needed.
>>>
>>> I cannot reproduce this. All output formats are OK, seems that your LaTeX
>>> system has a problem.
>>>
>>> Why do you think this is related to tex2lyx? You haven't used tex2lyx and
>>> tex2lyx is a program of its own.
>>>
>>> I just updated the layout and template file you find at
>>> http://wiki.lyx.org/Examples/AcmSigplan
>>> So try out again using these files. Note that they are for LyX 1.5.6, not
>>> LyX 1.6 test releases.
>>>
>>> regards Uwe
>>>
>>
>

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


I have moved from my Ubuntu PC where everything was alright to my
Vista PC. I installed the class file and the LyX layout. Reconfigured
LyX, reconfigured MikTeX


You need to do the opposite: First refresh MiKTeX's file name databasse, then 
reconfigure LyX.


Any ideas?


Nothing further.

regards Uwe

Re: ACM

[Julio Rojas]

BTW, while using this layout I could see that inserting a Keywords
environment inserts a Topics environment instead.
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 10:00 AM, Julio Rojas <[EMAIL PROTECTED]> wrote:
> Sorry Uwe, I never meant to point the problem towards tex2lyx. As a
> matter of fact, I had a bad problem with my texlive installation, due
> to some files left over the /etc/texmf/updmap.d folder that didn't let
> me make the upgrades needed to render the PDF. I have solved the
> problem of the fonts and I will download the new version of the
> layout.
>
> The only worrying point is that LyX never reported the fonts problem
> while rendering the PDF. The PDF was rendered, but as the file sent to
> the list show, it was badly generated. I tried compiling the tex file
> by hand and the fonts problem was shown as messages. Why could this
> happen?
> -
> Julio Rojas
> [EMAIL PROTECTED]
>
>
>
> On Tue, Oct 14, 2008 at 9:43 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
>> Julio Rojas schrieb:
>>
>>> BTW, I'm using the ACM Sigplan layout and something weird, that can be
>>> related to the problem with tex2lyx, is happening. Whe compiling the
>>> sample document or just a basic document, no errors are produced but
>>> the PDF/DVI document seems to lack the fonts needed.
>>
>> I cannot reproduce this. All output formats are OK, seems that your LaTeX
>> system has a problem.
>>
>> Why do you think this is related to tex2lyx? You haven't used tex2lyx and
>> tex2lyx is a program of its own.
>>
>> I just updated the layout and template file you find at
>> http://wiki.lyx.org/Examples/AcmSigplan
>> So try out again using these files. Note that they are for LyX 1.5.6, not
>> LyX 1.6 test releases.
>>
>> regards Uwe
>>
>

Re: ACM

[Julio Rojas]

Done and still the same problem. Removed files, reconfigures, added
the files and reconfigured in the correct secuence and still the same
problem.
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 6:56 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Julio Rojas schrieb:
>
>> I have moved from my Ubuntu PC where everything was alright to my
>> Vista PC. I installed the class file and the LyX layout. Reconfigured
>> LyX, reconfigured MikTeX
>
> You need to do the opposite: First refresh MiKTeX's file name databasse,
> then reconfigure LyX.
>
>> Any ideas?
>
> Nothing further.
>
> regards Uwe
>

Re: ACM

[Julio Rojas]

This is the ouput generated by LyX:

Unable to convert C:/Program Files/LyX
1.6.0rc3/bin/../Resources/layouts/sigplanconf.layout to format 8
Error reading `[layouts/sigplanconf.layout]'
(Check `sigplanconf')
Check your installation and try Options/Reconfigure...
Error: Could not load class

The document class sigplanconf could not be loaded.
Error: Error

Unable to set document class.

It seems like a LyX can't read the layout. Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Wed, Oct 15, 2008 at 9:49 PM, Julio Rojas <[EMAIL PROTECTED]> wrote:
> Done and still the same problem. Removed files, reconfigures, added
> the files and reconfigured in the correct secuence and still the same
> problem.
> -
> Julio Rojas
> [EMAIL PROTECTED]
>
>
>
> On Wed, Oct 15, 2008 at 6:56 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
>> Julio Rojas schrieb:
>>
>>> I have moved from my Ubuntu PC where everything was alright to my
>>> Vista PC. I installed the class file and the LyX layout. Reconfigured
>>> LyX, reconfigured MikTeX
>>
>> You need to do the opposite: First refresh MiKTeX's file name databasse,
>> then reconfigure LyX.
>>
>>> Any ideas?
>>
>> Nothing further.
>>
>> regards Uwe
>>
>

Re: ACM

[Julio Rojas]

BTW, I'm using the ACM Sigplan layout and something weird, that can be
related to the problem with tex2lyx, is happening. Whe compiling the
sample document or just a basic document, no errors are produced but
the PDF/DVI document seems to lack the fonts needed. I'm attaching the
sample document PDF output.

Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 1:28 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 By the way, LyX web site is down. Any news about that?

 It is up again.

 regards Uwe



ACM-sigplan.pdf
Description: Adobe PDF document

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


BTW, I'm using the ACM Sigplan layout and something weird, that can be
related to the problem with tex2lyx, is happening. Whe compiling the
sample document or just a basic document, no errors are produced but
the PDF/DVI document seems to lack the fonts needed.


I cannot reproduce this. All output formats are OK, seems that your LaTeX 
system has a problem.

Why do you think this is related to tex2lyx? You haven't used tex2lyx and tex2lyx is a program of 
its own.


I just updated the layout and template file you find at
http://wiki.lyx.org/Examples/AcmSigplan
So try out again using these files. Note that they are for LyX 1.5.6, not LyX 
1.6 test releases.

regards Uwe

Re: ACM

[Julio Rojas]

BTW, I'm using the ACM Sigplan layout and something weird, that can be
related to the problem with tex2lyx, is happening. Whe compiling the
sample document or just a basic document, no errors are produced but
the PDF/DVI document seems to lack the fonts needed. I'm attaching the
sample document PDF output.

Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 1:28 PM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 By the way, LyX web site is down. Any news about that?

 It is up again.

 regards Uwe



ACM-sigplan.pdf
Description: Adobe PDF document

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


BTW, I'm using the ACM Sigplan layout and something weird, that can be
related to the problem with tex2lyx, is happening. Whe compiling the
sample document or just a basic document, no errors are produced but
the PDF/DVI document seems to lack the fonts needed.


I cannot reproduce this. All output formats are OK, seems that your LaTeX 
system has a problem.

Why do you think this is related to tex2lyx? You haven't used tex2lyx and tex2lyx is a program of 
its own.


I just updated the layout and template file you find at
http://wiki.lyx.org/Examples/AcmSigplan
So try out again using these files. Note that they are for LyX 1.5.6, not LyX 
1.6 test releases.

regards Uwe

Re: ACM

[Julio Rojas]

BTW, I'm using the ACM Sigplan layout and something weird, that can be
related to the problem with tex2lyx, is happening. Whe compiling the
sample document or just a basic document, no errors are produced but
the PDF/DVI document seems to lack the fonts needed. I'm attaching the
sample document PDF output.

Any ideas?
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 1:28 PM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
>> By the way, LyX web site is down. Any news about that?
>
> It is up again.
>
> regards Uwe
>


ACM-sigplan.pdf
Description: Adobe PDF document

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


BTW, I'm using the ACM Sigplan layout and something weird, that can be
related to the problem with tex2lyx, is happening. Whe compiling the
sample document or just a basic document, no errors are produced but
the PDF/DVI document seems to lack the fonts needed.


I cannot reproduce this. All output formats are OK, seems that your LaTeX 
system has a problem.

Why do you think this is related to tex2lyx? You haven't used tex2lyx and tex2lyx is a program of 
its own.


I just updated the layout and template file you find at
http://wiki.lyx.org/Examples/AcmSigplan
So try out again using these files. Note that they are for LyX 1.5.6, not LyX 
1.6 test releases.

regards Uwe

Re: ACM - Solved

[Julio Rojas]

Thx Uwe!!!
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 2:55 AM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 http://wiki.lyx.org/Examples/AcmSigplan
 It contains a new layout file

 In case you already downloaded it, I just uploaded a new one that fixes some
 bugs.

 regards Uwe

Re: ACM

[Julio Rojas]

By the way, LyX web site is down. Any news about that?
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 2:55 AM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 http://wiki.lyx.org/Examples/AcmSigplan
 It contains a new layout file

 In case you already downloaded it, I just uploaded a new one that fixes some
 bugs.

 regards Uwe

Re: ACM

[Uwe Stöhr]

By the way, LyX web site is down. Any news about that?


It is up again.

regards Uwe

Re: ACM - Solved

[Julio Rojas]

Thx Uwe!!!
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 2:55 AM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 http://wiki.lyx.org/Examples/AcmSigplan
 It contains a new layout file

 In case you already downloaded it, I just uploaded a new one that fixes some
 bugs.

 regards Uwe

Re: ACM

[Julio Rojas]

By the way, LyX web site is down. Any news about that?
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 2:55 AM, Uwe Stöhr [EMAIL PROTECTED] wrote:
 http://wiki.lyx.org/Examples/AcmSigplan
 It contains a new layout file

 In case you already downloaded it, I just uploaded a new one that fixes some
 bugs.

 regards Uwe

Re: ACM

[Uwe Stöhr]

By the way, LyX web site is down. Any news about that?


It is up again.

regards Uwe

Re: ACM - Solved

[Julio Rojas]

Thx Uwe!!!
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 2:55 AM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
>> http://wiki.lyx.org/Examples/AcmSigplan
>> It contains a new layout file
>
> In case you already downloaded it, I just uploaded a new one that fixes some
> bugs.
>
> regards Uwe
>

Re: ACM

[Julio Rojas]

By the way, LyX web site is down. Any news about that?
-
Julio Rojas
[EMAIL PROTECTED]



On Sat, Oct 4, 2008 at 2:55 AM, Uwe Stöhr <[EMAIL PROTECTED]> wrote:
>> http://wiki.lyx.org/Examples/AcmSigplan
>> It contains a new layout file
>
> In case you already downloaded it, I just uploaded a new one that fixes some
> bugs.
>
> regards Uwe
>

Re: ACM

[Uwe Stöhr]

By the way, LyX web site is down. Any news about that?


It is up again.

regards Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


Hi. Can anybody send me the ACM LyX template? The site pointed in the
wiki is no longer working.


I updated
http://wiki.lyx.org/Examples/AcmSigplan
It contains a new layout file that I rewrote from scratch according to the latest version of the ACM 
SIGPLAN document class (the old layout was not usable and completely outdated). I also created a new 
template file.


The layout file will directly be shipped with the upcoming LyX 1.6.0 and probably also with LyX 
1.5.7, so that you then don't need to manually install it to LyX.


regards Uwe

Re: ACM

[Uwe Stöhr]

http://wiki.lyx.org/Examples/AcmSigplan
It contains a new layout file


In case you already downloaded it, I just uploaded a new one that fixes some 
bugs.

regards Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


Hi. Can anybody send me the ACM LyX template? The site pointed in the
wiki is no longer working.


I updated
http://wiki.lyx.org/Examples/AcmSigplan
It contains a new layout file that I rewrote from scratch according to the latest version of the ACM 
SIGPLAN document class (the old layout was not usable and completely outdated). I also created a new 
template file.


The layout file will directly be shipped with the upcoming LyX 1.6.0 and probably also with LyX 
1.5.7, so that you then don't need to manually install it to LyX.


regards Uwe

Re: ACM

[Uwe Stöhr]

http://wiki.lyx.org/Examples/AcmSigplan
It contains a new layout file


In case you already downloaded it, I just uploaded a new one that fixes some 
bugs.

regards Uwe

Re: ACM

[Uwe Stöhr]

Julio Rojas schrieb:


Hi. Can anybody send me the ACM LyX template? The site pointed in the
wiki is no longer working.


I updated
http://wiki.lyx.org/Examples/AcmSigplan
It contains a new layout file that I rewrote from scratch according to the latest version of the ACM 
SIGPLAN document class (the old layout was not usable and completely outdated). I also created a new 
template file.


The layout file will directly be shipped with the upcoming LyX 1.6.0 and probably also with LyX 
1.5.7, so that you then don't need to manually install it to LyX.


regards Uwe

Re: ACM

[Uwe Stöhr]

http://wiki.lyx.org/Examples/AcmSigplan
It contains a new layout file


In case you already downloaded it, I just uploaded a new one that fixes some 
bugs.

regards Uwe

Re: ACM SIG for LYX

[Nicolás]

Hello!

Actually it is not me who created the layout. I just found it on the web.
In this site (http://www.ece.iit.edu/~jgrad/) you can find the email of 
the author, so you can contact and ask him.


Regards,
Nicolás

Uwe Stöhr wrote:

Nicolás wrote:


Supheakmungkol SARIN wrote:


 Hello lyxers,
I have to write an ACM Sig paper and I'd like to know whether 
there is such a layout or template ever made for Lyx or not.


 


You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/



Hello Nicolás,

would you like it to include your layout to LyX? If yes could you send a 
permission to publish your work under the GPL.


Does your iithesis.layout also work with a iitthesis.cls from CTAN 
(the official one)?


thanks and regards
Uwe

Re: ACM SIG for LYX

[Nicolás]

Hello!

Actually it is not me who created the layout. I just found it on the web.
In this site (http://www.ece.iit.edu/~jgrad/) you can find the email of 
the author, so you can contact and ask him.


Regards,
Nicolás

Uwe Stöhr wrote:

Nicolás wrote:


Supheakmungkol SARIN wrote:


 Hello lyxers,
I have to write an ACM Sig paper and I'd like to know whether 
there is such a layout or template ever made for Lyx or not.


 


You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/



Hello Nicolás,

would you like it to include your layout to LyX? If yes could you send a 
permission to publish your work under the GPL.


Does your iithesis.layout also work with a iitthesis.cls from CTAN 
(the official one)?


thanks and regards
Uwe

Re: ACM SIG for LYX

[Nicolás]

Hello!

Actually it is not me who created the layout. I just found it on the web.
In this site (http://www.ece.iit.edu/~jgrad/) you can find the email of 
the author, so you can contact and ask him.


Regards,
Nicolás

Uwe Stöhr wrote:

Nicolás wrote:


Supheakmungkol SARIN wrote:


 Hello lyxers,
I have to write an ACM Sig paper and I'd like to know whether 
there is such a layout or template ever made for Lyx or not.


 >


You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/



Hello Nicolás,

would you like it to include your layout to LyX? If yes could you send a 
permission to publish your work under the GPL.


Does your "iithesis.layout" also work with a "iitthesis.cls" from CTAN 
(the official one)?


thanks and regards
Uwe

Re: ACM SIG for LYX

[Nicolás]

You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/


Supheakmungkol SARIN wrote:

 Hello lyxers,
  
  I have to write an ACM Sig paper and I'd like to know whether there is such a layout or template ever made for Lyx or not.
  
  Every comment is highly appreciated.
  
  Thank you,
  
  Mungkol
  





-
 Yahoo! DSL Something to write home about. Just $16.99/mo. or less

Re: ACM SIG for LYX

[Uwe Stöhr]

Nicolás wrote:


Supheakmungkol SARIN wrote:


 Hello lyxers,
I have to write an ACM Sig paper and I'd like to know whether 
there is such a layout or template ever made for Lyx or not.



You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/


Hello Nicolás,

would you like it to include your layout to LyX? If yes could you send a 
permission to publish your work under the GPL.


Does your iithesis.layout also work with a iitthesis.cls from CTAN 
(the official one)?


thanks and regards
Uwe

Re: ACM SIG for LYX

[Nicolás]

You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/


Supheakmungkol SARIN wrote:

 Hello lyxers,
  
  I have to write an ACM Sig paper and I'd like to know whether there is such a layout or template ever made for Lyx or not.
  
  Every comment is highly appreciated.
  
  Thank you,
  
  Mungkol
  





-
 Yahoo! DSL Something to write home about. Just $16.99/mo. or less

Re: ACM SIG for LYX

[Uwe Stöhr]

Nicolás wrote:


Supheakmungkol SARIN wrote:


 Hello lyxers,
I have to write an ACM Sig paper and I'd like to know whether 
there is such a layout or template ever made for Lyx or not.



You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/


Hello Nicolás,

would you like it to include your layout to LyX? If yes could you send a 
permission to publish your work under the GPL.


Does your iithesis.layout also work with a iitthesis.cls from CTAN 
(the official one)?


thanks and regards
Uwe

Re: ACM SIG for LYX

[Nicolás]

You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/


Supheakmungkol SARIN wrote:

 Hello lyxers,
  
  I have to write an ACM Sig paper and I'd like to know whether there is such a layout or template ever made for Lyx or not.
  
  Every comment is highly appreciated.
  
  Thank you,
  
  Mungkol
  





-
 Yahoo! DSL Something to write home about. Just $16.99/mo. or less

Re: ACM SIG for LYX

[Uwe Stöhr]

Nicolás wrote:


Supheakmungkol SARIN wrote:


 Hello lyxers,
I have to write an ACM Sig paper and I'd like to know whether 
there is such a layout or template ever made for Lyx or not.

>

You can find a layout here:

http://www.ece.iit.edu/~jgrad/lyx/


Hello Nicolás,

would you like it to include your layout to LyX? If yes could you send a 
permission to publish your work under the GPL.


Does your "iithesis.layout" also work with a "iitthesis.cls" from CTAN 
(the official one)?


thanks and regards
Uwe

RE: ACM SIG for LYX

[Jeroen Boydens]

Hello,

I did this some time ago, only a few steps are needed:
the answer to your problem is described in the following posting:

http://thread.gmane.org/gmane.editors.lyx.general/24733

;)

Jeroen

 -Oorspronkelijk bericht-
 Van: Supheakmungkol SARIN [mailto:[EMAIL PROTECTED]
 Verzonden: dinsdag 3 januari 2006 15:58
 Aan: lyx-users@lists.lyx.org
 Onderwerp: ACM SIG for LYX
 
  Hello lyxers,
 
   I have to write an ACM Sig paper and I'd like to know whether there is
 such a layout or template ever made for Lyx or not.
 
   Every comment is highly appreciated.
 
   Thank you,
 
   Mungkol
 
 
 
 
 
 -
  Yahoo! DSL Something to write home about. Just $16.99/mo. or less


smime.p7s
Description: S/MIME cryptographic signature