Re: errors typesetting UserGuide.lyx
Rather than further troubleshoot my issues with LyX on Snow Leopard, I decided to wait until I could start fresh with Lion. After some hardware repairs, I wiped the hard drive on my MacBook Pro and installed Lion 10.7.4, MaxTeX-2012 (which I immediately updated with the TeX Live Utility), LyX2.0.4+qt4, and Skim 1.3.21. I ran LyX - Reconfigure, and then set LyX and Skim to sync with each other. Now I can successfully typeset LyX documentation without error. I want to thank everybody on this mailing list who tried to help me troubleshoot; sometimes an OS simply has too much cruft from being ridden and put up wet too many times, and it's simpler just to start over. -- Rich On Tue, Feb 7, 2012 at 9:58 AM, Richard Heck rgh...@comcast.net wrote: On 02/07/2012 11:35 AM, Rich Talley wrote: Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it get back to the list. You should also try typesetting it manually from the command line, in so far as that is possible. Richard -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel noec...@uoregon.edu wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
Rather than further troubleshoot my issues with LyX on Snow Leopard, I decided to wait until I could start fresh with Lion. After some hardware repairs, I wiped the hard drive on my MacBook Pro and installed Lion 10.7.4, MaxTeX-2012 (which I immediately updated with the TeX Live Utility), LyX2.0.4+qt4, and Skim 1.3.21. I ran LyX - Reconfigure, and then set LyX and Skim to sync with each other. Now I can successfully typeset LyX documentation without error. I want to thank everybody on this mailing list who tried to help me troubleshoot; sometimes an OS simply has too much cruft from being ridden and put up wet too many times, and it's simpler just to start over. -- Rich On Tue, Feb 7, 2012 at 9:58 AM, Richard Heck rgh...@comcast.net wrote: On 02/07/2012 11:35 AM, Rich Talley wrote: Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it get back to the list. You should also try typesetting it manually from the command line, in so far as that is possible. Richard -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel noec...@uoregon.edu wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
Rather than further troubleshoot my issues with LyX on Snow Leopard, I decided to wait until I could start fresh with Lion. After some hardware repairs, I wiped the hard drive on my MacBook Pro and installed Lion 10.7.4, MaxTeX-2012 (which I immediately updated with the TeX Live Utility), LyX2.0.4+qt4, and Skim 1.3.21. I ran LyX -> Reconfigure, and then set LyX and Skim to sync with each other. Now I can successfully typeset LyX documentation without error. I want to thank everybody on this mailing list who tried to help me troubleshoot; sometimes an OS simply has too much cruft from being ridden and put up wet too many times, and it's simpler just to start over. -- Rich On Tue, Feb 7, 2012 at 9:58 AM, Richard Heckwrote: > On 02/07/2012 11:35 AM, Rich Talley wrote: > > Yes, I did reconfigure LyX. > > I am going to create a small test document that only has a title and a > couple of the problematic graphics files from the User's Manual, one eps > and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it > & get back to the list. > > You should also try typesetting it manually from the command line, in so > far as that is possible. > > Richard > > > -- Rich > > On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel wrote: > >> >> On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: >> >> > On 02/07/2012 12:50 AM, Jens Nöckel wrote: >> >> >> >> I think this can only be solved if you save the user's guide to an >> external file, bisect that new file until you localize the error to a >> reasonably small portion of the file, and then inspect the LaTeX log. >> >> >> > Did the OP reconfigure LyX after getting convert working? >> > >> >> Good question. Rich -- that should definitely be the first thing to do! >> >> Jens >> > > > >
Re: errors typesetting UserGuide.lyx
On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Richard Jens On Feb 6, 2012, at 1:09 PM, Rich Talley wrote: Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX - Preferences - File Handling - Converters - EPS - PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel noec...@uoregon.edu mailto:noec...@uoregon.edu wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.com mailto:rich.tal...@gmail.com wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it get back to the list. -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel noec...@uoregon.edu wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
On 02/07/2012 11:35 AM, Rich Talley wrote: Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it get back to the list. You should also try typesetting it manually from the command line, in so far as that is possible. Richard -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel noec...@uoregon.edu mailto:noec...@uoregon.edu wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Richard Jens On Feb 6, 2012, at 1:09 PM, Rich Talley wrote: Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX - Preferences - File Handling - Converters - EPS - PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel noec...@uoregon.edu mailto:noec...@uoregon.edu wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.com mailto:rich.tal...@gmail.com wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it get back to the list. -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel noec...@uoregon.edu wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
On 02/07/2012 11:35 AM, Rich Talley wrote: Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it get back to the list. You should also try typesetting it manually from the command line, in so far as that is possible. Richard -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel noec...@uoregon.edu mailto:noec...@uoregon.edu wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
On 02/07/2012 12:50 AM, Jens Nöckel wrote: I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Did the OP reconfigure LyX after getting convert working? Richard Jens On Feb 6, 2012, at 1:09 PM, Rich Talley wrote: Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX -> Preferences -> File Handling -> Converters -> EPS -> PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel> wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: "We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested." So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley > wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing to proceed. If that doesn't work, type X to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: > On 02/07/2012 12:50 AM, Jens Nöckel wrote: >> >> I think this can only be solved if you save the user's guide to an external >> file, bisect that new file until you localize the error to a reasonably >> small portion of the file, and then inspect the LaTeX log. >> > Did the OP reconfigure LyX after getting convert working? > Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it & get back to the list. -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckelwrote: > > On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: > > > On 02/07/2012 12:50 AM, Jens Nöckel wrote: > >> > >> I think this can only be solved if you save the user's guide to an > external file, bisect that new file until you localize the error to a > reasonably small portion of the file, and then inspect the LaTeX log. > >> > > Did the OP reconfigure LyX after getting convert working? > > > > Good question. Rich -- that should definitely be the first thing to do! > > Jens >
Re: errors typesetting UserGuide.lyx
On 02/07/2012 11:35 AM, Rich Talley wrote: Yes, I did reconfigure LyX. I am going to create a small test document that only has a title and a couple of the problematic graphics files from the User's Manual, one eps and one pdf. Then I'll see what's in the LaTeX log when I try to typeset it & get back to the list. You should also try typesetting it manually from the command line, in so far as that is possible. Richard -- Rich On Tue, Feb 7, 2012 at 9:29 AM, Jens Nöckel> wrote: On Feb 7, 2012, at 6:12 AM, Richard Heck wrote: > On 02/07/2012 12:50 AM, Jens Nöckel wrote: >> >> I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. >> > Did the OP reconfigure LyX after getting convert working? > Good question. Rich -- that should definitely be the first thing to do! Jens
Re: errors typesetting UserGuide.lyx
Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX - Preferences - File Handling - Converters - EPS - PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel noec...@uoregon.edu wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.comwrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Jens On Feb 6, 2012, at 1:09 PM, Rich Talley wrote: Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX - Preferences - File Handling - Converters - EPS - PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel noec...@uoregon.edu wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.com wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX - Preferences - File Handling - Converters - EPS - PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel noec...@uoregon.edu wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.comwrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Jens On Feb 6, 2012, at 1:09 PM, Rich Talley wrote: Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX - Preferences - File Handling - Converters - EPS - PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckel noec...@uoregon.edu wrote: Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.com wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
Thanks. As convert is now working, I'll put off installing software I probably don't actually need. I am able to convert the problematic files (such as mobius.eps) to pngs at the command line using convert manually. The problem appears to be that my installation of LyX is not using convert. As one of the wiki pages recommend, I ran this command: lyx -dbg graphics A bunch of graphic formats are listed as loadable. Pdf files are not; is this correct? I confirmed that I only have one copy of convert and that it's in my path. I looked at LyX -> Preferences -> File Handling -> Converters -> EPS -> PNG This shows 'convert $$i $$o', which I believe is correct. I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should there be more? -- Rich On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckelwrote: > Assuming convert is really the problem, perhaps you can try a different > imagemagick installation. > > Two options would be Macports, > http://www.macports.org/install.php > or Fink, > http://www.finkproject.org/download/index.php?phpLang=en > > You only need one of these. Most people seem to choose Macports nowadays, > but it really doesn't matter for your purposes. > After following the installation instructions for one of these package > managers, you can then install imagemagick by typing either > sudo port install imagemagick > (for Macports) > or > fink install imagemagick > (for Fink). > > This won't interfere with the MacTeX installation, so it can't hurt to > try. I have used both methods and found convert to work fine. > > Jens > > On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: > > So I found a problem with the 'convert' utility (part of ImageMagick > 6.6.9) that MacTex 2011 installs. The installation fails to install the > necessary xml files that 'convert' needs to function correctly at the > command line. > > Over at the macosx-tex mailing list, Dick Koch provided a link to the > necessary xml files with this comment: > > "We supply convert mainly for tex4html, thinking that users familiar with > the Unix version > will want to install the full ImageMagick. So the conversion you are using > was never tested." > > So I got 'convert' working at the command line. Unfortunately, this turned > out to be a red herring. I still can't typeset LyX's user manual > from within LyX. Pdf and eps files (such as mobius.eps) still don't > display within LyX ('Error converting to loadable format') and > typesetting still fails. > > I tried exporting the LyX user manual to LaTeX(plain) and typesetting the > resulting TeX file in TeXShop. That actually works, > except cross references break ('see section ??' in the resulting pdf). But > the pdf and eps files that are problematic in LyX typeset > in TeXShop. > > What am I missing? > > -- Rich > > > On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley wrote: > >> I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively >> for technical documentation and homework assignments. >> >> I upgraded this morning to MacTex 2011 (using the Tex Live Utility to >> bring all the packages up to date) and Lyx 2.0.2. >> >> I tried to create a pdf of the UserGuide (located in >> /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) >> >> Four eps files are generating 'Error converting to loadable format' in >> the LyX document. The LaTeX error dialog shows: >> >> Package pdftex.def Error: File >> `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} >> >> Using draft setting for this image. >> Try typing to proceed. >> If that doesn't work, type X to quit. >> >> >> - OR - >> >> Package pdftex.def Error: File >> `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} >> \hfill{}\subfloat[\label{f... >> >> >> So my system doesn't seem to be converting eps files correctly into pdfs >> for LyX to use. Any suggestions for troubleshooting? I've saved the >> complete LaTeX log, but it's huge and I'm not sure what's relevant. >> >> -- Rich >> MacBook Pro/OS X 10.6.8 >> >> > >
Re: errors typesetting UserGuide.lyx
I think this can only be solved if you save the user's guide to an external file, bisect that new file until you localize the error to a reasonably small portion of the file, and then inspect the LaTeX log. Jens On Feb 6, 2012, at 1:09 PM, Rich Talley wrote: > Thanks. As convert is now working, I'll put off installing software I > probably don't actually need. I am able to convert the problematic files > (such as mobius.eps) to pngs at the command line using convert manually. The > problem appears to be that my installation of LyX is not using convert. > > As one of the wiki pages recommend, I ran this command: > > lyx -dbg graphics > > A bunch of graphic formats are listed as loadable. Pdf files are not; is this > correct? > > I confirmed that I only have one copy of convert and that it's in my path. > > I looked at LyX -> Preferences -> File Handling -> Converters -> EPS -> PNG > > This shows 'convert $$i $$o', which I believe is correct. > > I show only two PDF converters, PDF(ps2pdf) to EPS and to Postscript. Should > there be more? > > > -- Rich > > > > On Sun, Feb 5, 2012 at 7:40 PM, Jens Nöckelwrote: > Assuming convert is really the problem, perhaps you can try a different > imagemagick installation. > > Two options would be Macports, > http://www.macports.org/install.php > or Fink, > http://www.finkproject.org/download/index.php?phpLang=en > > You only need one of these. Most people seem to choose Macports nowadays, but > it really doesn't matter for your purposes. > After following the installation instructions for one of these package > managers, you can then install imagemagick by typing either > sudo port install imagemagick > (for Macports) > or > fink install imagemagick > (for Fink). > > This won't interfere with the MacTeX installation, so it can't hurt to try. I > have used both methods and found convert to work fine. > > Jens > > On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: > >> So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) >> that MacTex 2011 installs. The installation fails to install the necessary >> xml files that 'convert' needs to function correctly at the command line. >> >> Over at the macosx-tex mailing list, Dick Koch provided a link to the >> necessary xml files with this comment: >> >> "We supply convert mainly for tex4html, thinking that users familiar with >> the Unix version >> will want to install the full ImageMagick. So the conversion you are using >> was never tested." >> >> So I got 'convert' working at the command line. Unfortunately, this turned >> out to be a red herring. I still can't typeset LyX's user manual >> from within LyX. Pdf and eps files (such as mobius.eps) still don't display >> within LyX ('Error converting to loadable format') and >> typesetting still fails. >> >> I tried exporting the LyX user manual to LaTeX(plain) and typesetting the >> resulting TeX file in TeXShop. That actually works, >> except cross references break ('see section ??' in the resulting pdf). But >> the pdf and eps files that are problematic in LyX typeset >> in TeXShop. >> >> What am I missing? >> >> -- Rich >> >> >> On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley wrote: >> I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for >> technical documentation and homework assignments. >> >> I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring >> all the packages up to date) and Lyx 2.0.2. >> >> I tried to create a pdf of the UserGuide (located in >> /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) >> >> Four eps files are generating 'Error converting to loadable format' in the >> LyX document. The LaTeX error dialog shows: >> >> Package pdftex.def Error: File >> `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} >> >> Using draft setting for this image. >> Try typing to proceed. >> If that doesn't work, type X to quit. >> >> >> - OR - >> >> Package pdftex.def Error: File >> `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} >> \hfill{}\subfloat[\label{f... >> >> >> So my system doesn't seem to be converting eps files correctly into pdfs for >> LyX to use. Any suggestions for troubleshooting? I've saved the complete >> LaTeX log, but it's huge and I'm not sure what's relevant. >> >> -- Rich >> MacBook Pro/OS X 10.6.8 >> >> > >
Re: errors typesetting UserGuide.lyx
So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.comwrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.com wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.comwrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested. So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talley rich.tal...@gmail.com wrote: I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
Re: errors typesetting UserGuide.lyx
So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) that MacTex 2011 installs. The installation fails to install the necessary xml files that 'convert' needs to function correctly at the command line. Over at the macosx-tex mailing list, Dick Koch provided a link to the necessary xml files with this comment: "We supply convert mainly for tex4html, thinking that users familiar with the Unix version will want to install the full ImageMagick. So the conversion you are using was never tested." So I got 'convert' working at the command line. Unfortunately, this turned out to be a red herring. I still can't typeset LyX's user manual from within LyX. Pdf and eps files (such as mobius.eps) still don't display within LyX ('Error converting to loadable format') and typesetting still fails. I tried exporting the LyX user manual to LaTeX(plain) and typesetting the resulting TeX file in TeXShop. That actually works, except cross references break ('see section ??' in the resulting pdf). But the pdf and eps files that are problematic in LyX typeset in TeXShop. What am I missing? -- Rich On Sat, Feb 4, 2012 at 2:47 PM, Richard Talleywrote: > I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively > for technical documentation and homework assignments. > > I upgraded this morning to MacTex 2011 (using the Tex Live Utility to > bring all the packages up to date) and Lyx 2.0.2. > > I tried to create a pdf of the UserGuide (located in > /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) > > Four eps files are generating 'Error converting to loadable format' in the > LyX document. The LaTeX error dialog shows: > > Package pdftex.def Error: File > `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} > > Using draft setting for this image. > > Try typing to proceed. > > If that doesn't work, type X to quit. > > > > - OR - > > > Package pdftex.def Error: File > `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} > > \hfill{}\subfloat[\label{f... > > > > So my system doesn't seem to be converting eps files correctly into pdfs > for LyX to use. Any suggestions for troubleshooting? I've saved the > complete LaTeX log, but it's huge and I'm not sure what's relevant. > > > -- Rich > > MacBook Pro/OS X 10.6.8 > > >
Re: errors typesetting UserGuide.lyx
Assuming convert is really the problem, perhaps you can try a different imagemagick installation. Two options would be Macports, http://www.macports.org/install.php or Fink, http://www.finkproject.org/download/index.php?phpLang=en You only need one of these. Most people seem to choose Macports nowadays, but it really doesn't matter for your purposes. After following the installation instructions for one of these package managers, you can then install imagemagick by typing either sudo port install imagemagick (for Macports) or fink install imagemagick (for Fink). This won't interfere with the MacTeX installation, so it can't hurt to try. I have used both methods and found convert to work fine. Jens On Feb 5, 2012, at 5:41 PM, Richard Talley wrote: > So I found a problem with the 'convert' utility (part of ImageMagick 6.6.9) > that MacTex 2011 installs. The installation fails to install the necessary > xml files that 'convert' needs to function correctly at the command line. > > Over at the macosx-tex mailing list, Dick Koch provided a link to the > necessary xml files with this comment: > > "We supply convert mainly for tex4html, thinking that users familiar with the > Unix version > will want to install the full ImageMagick. So the conversion you are using > was never tested." > > So I got 'convert' working at the command line. Unfortunately, this turned > out to be a red herring. I still can't typeset LyX's user manual > from within LyX. Pdf and eps files (such as mobius.eps) still don't display > within LyX ('Error converting to loadable format') and > typesetting still fails. > > I tried exporting the LyX user manual to LaTeX(plain) and typesetting the > resulting TeX file in TeXShop. That actually works, > except cross references break ('see section ??' in the resulting pdf). But > the pdf and eps files that are problematic in LyX typeset > in TeXShop. > > What am I missing? > > -- Rich > > > On Sat, Feb 4, 2012 at 2:47 PM, Richard Talleywrote: > I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for > technical documentation and homework assignments. > > I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring > all the packages up to date) and Lyx 2.0.2. > > I tried to create a pdf of the UserGuide (located in > /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) > > Four eps files are generating 'Error converting to loadable format' in the > LyX document. The LaTeX error dialog shows: > > Package pdftex.def Error: File > `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} > > Using draft setting for this image. > Try typing to proceed. > If that doesn't work, type X to quit. > > > - OR - > > Package pdftex.def Error: File > `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} > \hfill{}\subfloat[\label{f... > > > So my system doesn't seem to be converting eps files correctly into pdfs for > LyX to use. Any suggestions for troubleshooting? I've saved the complete > LaTeX log, but it's huge and I'm not sure what's relevant. > > -- Rich > MacBook Pro/OS X 10.6.8 > >
errors typesetting UserGuide.lyx
I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
errors typesetting UserGuide.lyx
I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing return to proceed. If that doesn't work, type X return to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8
errors typesetting UserGuide.lyx
I had been running MacTex 2009 and Lyx 1.6.8. and using them extensively for technical documentation and homework assignments. I upgraded this morning to MacTex 2011 (using the Tex Live Utility to bring all the packages up to date) and Lyx 2.0.2. I tried to create a pdf of the UserGuide (located in /Applications/LyX.app/Contents/Resources/doc/ - opens as read only) Four eps files are generating 'Error converting to loadable format' in the LyX document. The LaTeX error dialog shows: Package pdftex.def Error: File `34_Applications_LyX_app_Contents_Resources_doc_clipart_mobius.pdf} Using draft setting for this image. Try typing to proceed. If that doesn't work, type X to quit. - OR - Package pdftex.def Error: File `42_Applications_LyX_app_Contents_Resources_doc_clipart_escher-lsd.pdf}} \hfill{}\subfloat[\label{f... So my system doesn't seem to be converting eps files correctly into pdfs for LyX to use. Any suggestions for troubleshooting? I've saved the complete LaTeX log, but it's huge and I'm not sure what's relevant. -- Rich MacBook Pro/OS X 10.6.8