Re: installing lyx-1.2.1-1 on RedHat 7.3
On Thu, Sep 26, 2002 at 08:35:58PM -0700, Rich Shepard wrote:
There is an easier, and equivalent, way of doing this.
Install the src.rpm ('rpm -ivh package.src.rpm'). This puts the
components in their proper directories; /usr/src/redhat/BUILD, ../SRPMS,
../SPECS. Next, cd to the SPECS/ directory and, as root, run 'rpm -ba
package.spec'. This is the 'build all' command and it will recreate the
.src.rpm the binary .rpm and all based on what's on your box. With this
approach you can also add other options, such as '--target i686'.
There is yet more simple way:
in any directory run
rpm --rebuild package.src.rpm
Matej
--
Matej Cepl, [EMAIL PROTECTED]
138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
MSDOS didn't get as bad as it is overnight -- it took over ten years
of careful development.
-- [EMAIL PROTECTED]
Re: installing lyx-1.2.1-1 on RedHat 7.3
On Thu, Sep 26, 2002 at 08:35:58PM -0700, Rich Shepard wrote:
There is an easier, and equivalent, way of doing this.
Install the src.rpm ('rpm -ivh package.src.rpm'). This puts the
components in their proper directories; /usr/src/redhat/BUILD, ../SRPMS,
../SPECS. Next, cd to the SPECS/ directory and, as root, run 'rpm -ba
package.spec'. This is the 'build all' command and it will recreate the
.src.rpm the binary .rpm and all based on what's on your box. With this
approach you can also add other options, such as '--target i686'.
There is yet more simple way:
in any directory run
rpm --rebuild package.src.rpm
Matej
--
Matej Cepl, [EMAIL PROTECTED]
138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
MSDOS didn't get as bad as it is overnight -- it took over ten years
of careful development.
-- [EMAIL PROTECTED]
Re: installing lyx-1.2.1-1 on RedHat 7.3
On Thu, Sep 26, 2002 at 08:35:58PM -0700, Rich Shepard wrote:
> There is an easier, and equivalent, way of doing this.
>
> Install the src.rpm ('rpm -ivh .src.rpm'). This puts the
> components in their proper directories; /usr/src/redhat/BUILD, ../SRPMS,
> ../SPECS. Next, cd to the SPECS/ directory and, as root, run 'rpm -ba
> .spec'. This is the 'build all' command and it will recreate the
> .src.rpm the binary .rpm and all based on what's on your box. With this
> approach you can also add other options, such as '--target i686'.
There is yet more simple way:
in any directory run
rpm --rebuild .src.rpm
Matej
--
Matej Cepl, [EMAIL PROTECTED]
138 Highland Ave. #10, Somerville, Ma 02143, (617) 623-1488
MSDOS didn't get as bad as it is overnight -- it took over ten years
of careful development.
-- [EMAIL PROTECTED]
installing lyx-1.2.1-1 on RedHat 7.3
Hello, I tried to rebuild the source RPM on Redhat 7.3 as instructed. (rpm --rebuild lyx-1.2.1-1.src.rpm) However the rebuild did not work the following error message was generated; g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images -I../../../src/ -I../../../src/frontends/ -I../../../src/frontends/controllers -I../../.. -I../../../boost -isystem /usr/X11R6/include -O2 -march=i386 -mcpu=i686 -c Alert_pimpl.C -MT Alert_pimpl.lo -MD -MP -MF .deps/Alert_pimpl.TPlo In file included from Alert_pimpl.C:17: xforms_helpers.h:17:26: forms.h: No such file or directory Alert_pimpl.C:21:26: forms.h: No such file or directory make[5]: *** [Alert_pimpl.lo] Error 1 make[5]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends/xforms' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends/xforms' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src' make: *** [all-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.94265 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.94265 (%build) any suggestions Thanks in advance! Matty
installing lyx-1.2.1-1 on RedHat 7.3
Dear all, I hope this helps any redhat users out there. I eventually managed to get lyx 1.2.1 running on redhat 7.3. I am definitely not an expert on linux, redhat ect so if there is anything wrong or dangerous with the following suggestions please point them out before i cause major damage to others. I tried to rebuild lyx using the the source file as suggested (rpm --rebuild lyx-1.2.1-1.src.rpm) i recieved an error related in to xforms. I then uninstalled xforms-0.89-5 and replaced it with xforms-0.88-4 Then i tried installing lyx-1.2.1-1.rpm and rebiulding from lyx-1.2.1-1.src.rpm, this still would not work (libstdc++-libc6.1-2.so.3 was now the problem) However the good news is that recompiling the source code (generated during rpm --rebuild lyx-1.2.1-1.src.rpm) using ./configure and ./make worked once xforms-0.88-4 was installed Matty On Fri, 2002-09-27 at 10:05, Rich Shepard wrote: On 27 Sep 2002, Matthew Kelly wrote: xforms_helpers.h:17:26: forms.h: No such file or directory Matty, Do you have the xforms package installed? If not, grab that first. Rich Dr. Richard B. Shepard, President Applied Ecosystem Services, Inc. (TM) 2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A. + 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED] http://www.appl-ecosys.com
Re: installing lyx-1.2.1-1 on RedHat 7.3
On 27 Sep 2002, Matthew Kelly wrote:
I then uninstalled xforms-0.89-5 and replaced it with xforms-0.88-4
Good move!
However the good news is that recompiling the source code (generated
during rpm --rebuild lyx-1.2.1-1.src.rpm) using
./configure and ./make worked once xforms-0.88-4 was installed
There is an easier, and equivalent, way of doing this.
Install the src.rpm ('rpm -ivh package.src.rpm'). This puts the
components in their proper directories; /usr/src/redhat/BUILD, ../SRPMS,
../SPECS. Next, cd to the SPECS/ directory and, as root, run 'rpm -ba
package.spec'. This is the 'build all' command and it will recreate the
.src.rpm the binary .rpm and all based on what's on your box. With this
approach you can also add other options, such as '--target i686'.
As a further couple of points of interest, most well-built tarballs have a
spec file in them. You can try running 'rpm -ta package.tgz' and you
should get a binary package from it.
Also, grab the rpm for 'checkinstall'. It, too, will build a Red Hat .rpm
(or Debian .deb) from a tarball. Instead of running ./configure, make, make
install, you replace the last step with checkinstall.
Have fun!
Rich
Dr. Richard B. Shepard, President
Applied Ecosystem Services, Inc. (TM)
2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A.
+ 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED]
http://www.appl-ecosys.com
installing lyx-1.2.1-1 on RedHat 7.3
Hello, I tried to rebuild the source RPM on Redhat 7.3 as instructed. (rpm --rebuild lyx-1.2.1-1.src.rpm) However the rebuild did not work the following error message was generated; g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images -I../../../src/ -I../../../src/frontends/ -I../../../src/frontends/controllers -I../../.. -I../../../boost -isystem /usr/X11R6/include -O2 -march=i386 -mcpu=i686 -c Alert_pimpl.C -MT Alert_pimpl.lo -MD -MP -MF .deps/Alert_pimpl.TPlo In file included from Alert_pimpl.C:17: xforms_helpers.h:17:26: forms.h: No such file or directory Alert_pimpl.C:21:26: forms.h: No such file or directory make[5]: *** [Alert_pimpl.lo] Error 1 make[5]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends/xforms' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends/xforms' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src' make: *** [all-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.94265 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.94265 (%build) any suggestions Thanks in advance! Matty
installing lyx-1.2.1-1 on RedHat 7.3
Dear all, I hope this helps any redhat users out there. I eventually managed to get lyx 1.2.1 running on redhat 7.3. I am definitely not an expert on linux, redhat ect so if there is anything wrong or dangerous with the following suggestions please point them out before i cause major damage to others. I tried to rebuild lyx using the the source file as suggested (rpm --rebuild lyx-1.2.1-1.src.rpm) i recieved an error related in to xforms. I then uninstalled xforms-0.89-5 and replaced it with xforms-0.88-4 Then i tried installing lyx-1.2.1-1.rpm and rebiulding from lyx-1.2.1-1.src.rpm, this still would not work (libstdc++-libc6.1-2.so.3 was now the problem) However the good news is that recompiling the source code (generated during rpm --rebuild lyx-1.2.1-1.src.rpm) using ./configure and ./make worked once xforms-0.88-4 was installed Matty On Fri, 2002-09-27 at 10:05, Rich Shepard wrote: On 27 Sep 2002, Matthew Kelly wrote: xforms_helpers.h:17:26: forms.h: No such file or directory Matty, Do you have the xforms package installed? If not, grab that first. Rich Dr. Richard B. Shepard, President Applied Ecosystem Services, Inc. (TM) 2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A. + 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED] http://www.appl-ecosys.com
Re: installing lyx-1.2.1-1 on RedHat 7.3
On 27 Sep 2002, Matthew Kelly wrote:
I then uninstalled xforms-0.89-5 and replaced it with xforms-0.88-4
Good move!
However the good news is that recompiling the source code (generated
during rpm --rebuild lyx-1.2.1-1.src.rpm) using
./configure and ./make worked once xforms-0.88-4 was installed
There is an easier, and equivalent, way of doing this.
Install the src.rpm ('rpm -ivh package.src.rpm'). This puts the
components in their proper directories; /usr/src/redhat/BUILD, ../SRPMS,
../SPECS. Next, cd to the SPECS/ directory and, as root, run 'rpm -ba
package.spec'. This is the 'build all' command and it will recreate the
.src.rpm the binary .rpm and all based on what's on your box. With this
approach you can also add other options, such as '--target i686'.
As a further couple of points of interest, most well-built tarballs have a
spec file in them. You can try running 'rpm -ta package.tgz' and you
should get a binary package from it.
Also, grab the rpm for 'checkinstall'. It, too, will build a Red Hat .rpm
(or Debian .deb) from a tarball. Instead of running ./configure, make, make
install, you replace the last step with checkinstall.
Have fun!
Rich
Dr. Richard B. Shepard, President
Applied Ecosystem Services, Inc. (TM)
2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A.
+ 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED]
http://www.appl-ecosys.com
installing lyx-1.2.1-1 on RedHat 7.3
Hello, I tried to rebuild the source RPM on Redhat 7.3 as instructed. (rpm --rebuild lyx-1.2.1-1.src.rpm) However the rebuild did not work the following error message was generated; g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images -I../../../src/ -I../../../src/frontends/ -I../../../src/frontends/controllers -I../../.. -I../../../boost -isystem /usr/X11R6/include -O2 -march=i386 -mcpu=i686 -c Alert_pimpl.C -MT Alert_pimpl.lo -MD -MP -MF .deps/Alert_pimpl.TPlo In file included from Alert_pimpl.C:17: xforms_helpers.h:17:26: forms.h: No such file or directory Alert_pimpl.C:21:26: forms.h: No such file or directory make[5]: *** [Alert_pimpl.lo] Error 1 make[5]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends/xforms' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends/xforms' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src/frontends' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/usr/src/redhat/BUILD/lyx-1.2.1/src' make: *** [all-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.94265 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.94265 (%build) any suggestions Thanks in advance! Matty
installing lyx-1.2.1-1 on RedHat 7.3
Dear all, I hope this helps any redhat users out there. I eventually managed to get lyx 1.2.1 running on redhat 7.3. I am definitely not an expert on linux, redhat ect so if there is anything wrong or dangerous with the following suggestions please point them out before i cause major damage to others. I tried to rebuild lyx using the the source file as suggested (rpm --rebuild lyx-1.2.1-1.src.rpm) i recieved an error related in to xforms. I then uninstalled xforms-0.89-5 and replaced it with xforms-0.88-4 Then i tried installing lyx-1.2.1-1.rpm and rebiulding from lyx-1.2.1-1.src.rpm, this still would not work (libstdc++-libc6.1-2.so.3 was now the problem) However the good news is that recompiling the source code (generated during rpm --rebuild lyx-1.2.1-1.src.rpm) using ./configure and ./make worked once xforms-0.88-4 was installed Matty On Fri, 2002-09-27 at 10:05, Rich Shepard wrote: > On 27 Sep 2002, Matthew Kelly wrote: > > > xforms_helpers.h:17:26: forms.h: No such file or directory > > Matty, > > Do you have the xforms package installed? If not, grab that first. > > Rich > > Dr. Richard B. Shepard, President > >Applied Ecosystem Services, Inc. (TM) > 2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A. > + 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED] > http://www.appl-ecosys.com >
Re: installing lyx-1.2.1-1 on RedHat 7.3
On 27 Sep 2002, Matthew Kelly wrote:
> I then uninstalled xforms-0.89-5 and replaced it with xforms-0.88-4
Good move!
> However the good news is that recompiling the source code (generated
> during rpm --rebuild lyx-1.2.1-1.src.rpm) using
> ./configure and ./make worked once xforms-0.88-4 was installed
There is an easier, and equivalent, way of doing this.
Install the src.rpm ('rpm -ivh .src.rpm'). This puts the
components in their proper directories; /usr/src/redhat/BUILD, ../SRPMS,
../SPECS. Next, cd to the SPECS/ directory and, as root, run 'rpm -ba
.spec'. This is the 'build all' command and it will recreate the
.src.rpm the binary .rpm and all based on what's on your box. With this
approach you can also add other options, such as '--target i686'.
As a further couple of points of interest, most well-built tarballs have a
spec file in them. You can try running 'rpm -ta .tgz' and you
should get a binary package from it.
Also, grab the rpm for 'checkinstall'. It, too, will build a Red Hat .rpm
(or Debian .deb) from a tarball. Instead of running ./configure, make, make
install, you replace the last step with checkinstall.
Have fun!
Rich
Dr. Richard B. Shepard, President
Applied Ecosystem Services, Inc. (TM)
2404 SW 22nd Street | Troutdale, OR 97060-1247 | U.S.A.
+ 1 503-667-4517 (voice) | + 1 503-667-8863 (fax) | [EMAIL PROTECTED]
http://www.appl-ecosys.com
