It was the first test run, was a small part maybe 20mm by 30 or so and
started in the middle i should have 110 120mm that i could move from the
center of my build
would the max and min values affect this i have the min set to -10.0 if so
could that affect the x y, but i didn't think that would be a problem with
the delta printer.
thanks gary
On Friday, January 26, 2018 at 2:40:23 PM UTC-5, gary wrote:
> I had my cramps wired and configured but had problems with the mcodes so
> disconnected it
> and put back my bebopr board and figured out what i was doing wrong..
>
> Now i put back the cramps and reconnected it but i am having stepper motor
> problems
> as soon as i plug the board in to 12v the motors lockup and not when i
> hit the power or estop buttons in machinekit
>
> i can't get any motor movement no homing nothing, before i
> disconnected the cramps, the motors would only lock when i hit the power
> estop buttons
> in machinekit gui screen.
>
> i didn't change any thing with the wiring or connectors all is the same as
> before i disconnected it
>
> I get power to the stepper drives adjustment screws and can adjust them ok
>
> didn't change any jumpers on the board..
>
> thanks for any suggestions
> Gary
>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
