[Mailman-Users] mails send from a webmail system dont get a Subject_prefix if there are umlauts
Hi, recently we noticed, that mails send from our webmailsystem TWIG containing a german umlaut in the subject aren't getting a Subject_prefix from maliman. Mails from other mailclients do get the Subject_prefix. The problem seams, that twig isn't encoding the subject correctly, so it get invalid and thats why mailman isn't setting a Subject_prefix. Is there a way to get mailman setting the Subject_prefix? Thanks for hints and comments! Regrads Götz -- Götz Reinicke IT Koordinator Tel. +49 7141 969-420 Fax +49 7141 969 55-420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp
Re: [Mailman-Users] E-Mail to some users get lost or are very late
Brad Knowles schrieb: > At 12:11 PM +0200 2005-07-12, Götz Reinicke wrote: > >>> Then the next thing to do is turn on personalization for the >>> list(s) >>> in question, so that you can check the log entries for each and every >>> recipient separately. >> >> >> could you please give me a hint, where to enable this? (Today is a >> bad day >> for ...) > > > It's going to depend on whether or not the site-wide list server > configuration allows the list admin to turn on personalization. See > <http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.015.htp>, > and you should also see > <http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq02.002.htp> > and <http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq04.012.htp>. > O.K., I did this, and it seams, that the mails are send personalised. But there are still the same problems as before. I looked deeper into the mailq and found, that some mails are shown this way; this told me nothing: mailq -q | more j6C9MS4l024817* 729 Tue Jul 12 11:22 <[EMAIL PROTECTED] (Deferred: local mailer (/usr/bin/procmail) exited with EX_TE) fchoquet csakarov mhartman afetsche bbodmer <[EMAIL PROTECTED]> gkuschmi \\mmueller4 jlocher mstachle jproehl sarendt afieser cschwoch sschmid fkoziol nimfeld estrecke kschmid sduevel [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] j6C9bNxl027556* 730 Tue Jul 12 11:37 <[EMAIL PROTECTED] (Deferred: local mailer (/usr/bin/procmail) exited with EX_TE) fchoquet csakarov mhartman afetsche bbodmer <[EMAIL PROTECTED]> gkuschmi \\mmueller4 jlocher mstachle jproehl sarendt afieser cschwoch sschmid fkoziol nimfeld estrecke kschmid sduevel [EMAIL PROTECTED]
Re: [Mailman-Users] E-Mail to some users get lost or are very late
Brad Knowles schrieb: > At 10:52 AM +0200 2005-07-12, Götz Reinicke wrote: > >> I removed the restriction from sendmail but Mails get still lost or are >> delayed (only for some users eg. one testmail to myselve was delayed by >> about 20 Minutes) > > > You're much better off having Mailman slice things up into 100 > recipient chunks, and then having each smaller chunk handed off to > sendmail. That way you can get more of the chunks processed in > parallel, and get overall better throughput rates. > O.K. I've done this, but still mails aren'd deliverd to all subscribed accounts :-((( Götz Reinicke -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp
Re: [Mailman-Users] E-Mail to some users get lost or are very late
John Dennis schrieb: > On Mon, 2005-07-11 at 16:38 +0200, Götz Reinicke wrote: > >>Hi, >> >>we run mailman mailman-2.1.5-33.rhel4 on a RHEL 4 Clone (Tao Linux 4, >>kernel 2.6.9-11.ELsmp). Some days ago, some users noticed, that they >>dont get all mails send to the mailinglists they are subscribed to or >>that they get the mails with a delay from some days or weeks :-( >> >>I checked the quota, forward, alias and mailman settings for thouth >>users, but everything seams O.K. for me. >> >>We use sendmail as MTA and dovecot as imap server. >> >>Any ideas what to check? Or waht info to provide? > > > You're going to have to identify one of the delayed emails and look at > it's headers to see where it was held up. You might also look > at /var/log/maillog and the /var/log/mailman/smtp logs to see if and > when the suspect messages were processed. Missing mail may have also > bounced. Once your MTA hands off a set of mail to a destination SMTP > server a whole host of things can happen to it that has nothing to do > with your server. Your best bet is to verify from the logs the mail left > your server when you expected it to. The mailman server is also our central mailserver for our domain and the users subscribed to the list are local users. The mailmanlogs showed me an "failed with code 452: 4.5.3 Too many recipients"-error, so I looked at the max rcpts settings of mailman and sendmail. sendmail accepted 100 rcpts, while mailman sended 500 (SMTP_MAX_RCPTS = 500). But I never had this problem bevore and the settings are set from the begining of the installation (couple of month ago.) I removed the restriction from sendmail but Mails get still lost or are delayed (only for some users eg. one testmail to myselve was delayed by about 20 Minutes) In the maillog I found the following: "timeout waiting for input from local during Draining Input" Any more ideas? Thanks & best regards Götz -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp
[Mailman-Users] E-Mail to some users get lost or are very late
Hi, we run mailman mailman-2.1.5-33.rhel4 on a RHEL 4 Clone (Tao Linux 4, kernel 2.6.9-11.ELsmp). Some days ago, some users noticed, that they dont get all mails send to the mailinglists they are subscribed to or that they get the mails with a delay from some days or weeks :-( I checked the quota, forward, alias and mailman settings for thouth users, but everything seams O.K. for me. We use sendmail as MTA and dovecot as imap server. Any ideas what to check? Or waht info to provide? Thanks an best regards Götz Reinicke -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp
[Mailman-Users] Moving mailman to a new server
Hi, I have a running mailman 2.1.2-1 Installation on a Redhat 9 server. Now I'd like to move this installation to a new Fedora 1 server. What files/directories should I copy? How to start? 1. I'd install mailman on the new server and than copy the old directorys (archives, lists, logs) to the new server. 2. edit the /etc/alias file 3 ... ?? Thanks for any hints and tips!! Best regards, Götz Reinicke -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
[Mailman-Users] how to set up just an information-list
Hi, what I want is to configure an existing list that way, that only the staff can post to it, but not the subscribed students themselves. Is this the way to do this: Add the staff by "Privacy options" -> "sender filters" -> "Non-member filters" Set all students in the "Membership Management" -> "Membership List" to moderated and set "discard" for "member_moderation_action" in the "Privacy options". Thanks for any tips and hints! regards Götz Reinicke -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
[Mailman-Users] high cpu load after update to 2.1.2 on rh 9
Hi, I recently updated our mailmansystem to version 2.1.2 using the rawhide rpm. The base-system is RH 9 on a dual CPU Server. Now I have a cpu usage of 99% (on one CPU) by one python process. restarting mailman and eaven the whole server didn't solve the problem. Any ideas? Thanks! Götz Reinicke -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 [EMAIL PROTECTED] Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
