Re: [Mailman-Users] No public lists
Michel R Vaillancourt wrote: Mail is still moving properly to the list server. However, the web interface died almost immediately. Specifically, if you go to http://lists.wolfstar.ca/mailman/listinfo.cgi it says: There currently are no publicly-advertised Mailman mailing lists on lists.wolfstar.ca. See Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Article 4.29, partiucularly Existing versus new lists. -- Mark Sapiro [EMAIL PROTECTED] The highway is for gamblers, San Francisco Bay Area, Californiabetter use your sense - B. Dylan -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=showamp;file=faq01.027.htp
[Mailman-Users] No public lists
Greetings to the list. I've been happily running Mailman now on a Slackware box for several years. I'm in the process of reorganizing my domain, so changed the name the server that is hosting my half-dozen lists from www.wolfstar.ca to lists.wolfstar.ca. Mail is still moving properly to the list server. However, the web interface died almost immediately. Specifically, if you go to http://lists.wolfstar.ca/mailman/listinfo.cgi it says: There currently are no publicly-advertised Mailman mailing lists on lists.wolfstar.ca. I'm stumped. I've verified that my settings in Mailman/mm_cfg.py reflect the new environment. I've even gone through with bin/config_list and ensured that 'advertised = 1' is set for all lists. Any suggestions on how to correct this? -- -- Michel Vaillancourt Wolfstar Systems -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=showamp;file=faq01.027.htp
Re: [Mailman-Users] no public lists in listinfo after move
I know this has come up before (maybe not the same issue, but probably - where listinfo doesn't work but admin does) - try searching through the archives of this list. Sorry, but I don't remember what the solution to this is (despite the fact that it happened to me, once!) Greg On Friday, January 17, 2003, at 02:33 AM, [EMAIL PROTECTED] wrote: Hello all- I'm new to this list but have been using mailman successfully for quite some time. I have run into a snag, however. I'm changing mailman servers (going from RedHat 7.1 to RedHat 7.3), and near as I can tell all I needed to do was copy the mailman folder over to the new server, make sure the apache and mailman GIDs remained the same, symlink the wrapper into /etc/smrsh, and then feed in the crontab stuff. I did all this, and everything seems to work except when I go to the listinfo page, I don't get any public mailing lists there. If I know the name of the list, I can get to it, and if I go to the admin page all the public lists are listed there, but not on the listinfo page. Now on that machine if I give the apache user a shell account and su as it, then run the listinfo script manually, it does print out an html page with all the expected mailman lists. Weird eh? I emptied my browser so I know it's not the cache. I know the apache ScriptAlias lines are correct because all the other stuff works ok (I can even login as an admin, or view a lists archives). Any suggestions on where to look next? Thanks in advance, Brian -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: [EMAIL PROTECTED] Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/ greg%40gregwestin.com -- http://www.gregwestin.com Contact info: http://www.gregwestin.com/contact.php -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
[Mailman-Users] no public lists in listinfo after move
Hello all- I'm new to this list but have been using mailman successfully for quite some time. I have run into a snag, however. I'm changing mailman servers (going from RedHat 7.1 to RedHat 7.3), and near as I can tell all I needed to do was copy the mailman folder over to the new server, make sure the apache and mailman GIDs remained the same, symlink the wrapper into /etc/smrsh, and then feed in the crontab stuff. I did all this, and everything seems to work except when I go to the listinfo page, I don't get any public mailing lists there. If I know the name of the list, I can get to it, and if I go to the admin page all the public lists are listed there, but not on the listinfo page. Now on that machine if I give the apache user a shell account and su as it, then run the listinfo script manually, it does print out an html page with all the expected mailman lists. Weird eh? I emptied my browser so I know it's not the cache. I know the apache ScriptAlias lines are correct because all the other stuff works ok (I can even login as an admin, or view a lists archives). Any suggestions on where to look next? Thanks in advance, Brian -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ This message was sent to: archive@jab.org Unsubscribe or change your options at http://mail.python.org/mailman/options/mailman-users/archive%40jab.org
Re: [Mailman-Users] No public lists?
You can of course customize this on a per-list basis by using the hostname this list prefers in the General Options of your mailing list administration page. The behavior also depends on how you're set up for virtual hosting in mm_cfg.py . On Sat, 2002-10-26 at 18:30, Armando Soto Baeza wrote: I had that problem too. The thing was so easy! Check you have written the right name of your site in your config file. In my case I had put www.mydomain.com, then I change it to just mydomain.com and it worked! I've installed mailman 2.0.13 fresh and configure everything as correctly as I can tell. I have been running mailman on another system for a while so I am fairly familiar with it. When I create my first list, test. It doesn't show up on the listinfo page but I can get to the admin page and the listinfo/test page. It also shows up on the /admin page and I can manage it just fine. Ideas? Bill -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
Re: [Mailman-Users] No public lists?
I had that problem too. The thing was so easy! Check you have written the right name of your site in your config file. In my case I had put www.mydomain.com, then I change it to just mydomain.com and it worked! I've installed mailman 2.0.13 fresh and configure everything as correctly as I can tell. I have been running mailman on another system for a while so I am fairly familiar with it. When I create my first list, test. It doesn't show up on the listinfo page but I can get to the admin page and the listinfo/test page. It also shows up on the /admin page and I can manage it just fine. Ideas? Bill -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
Re: [Mailman-Users] No public lists?
Check also the link pointing to your listinfo page, I had www.mydomain.com, so I had to change it too. Good Luck I've installed mailman 2.0.13 fresh and configure everything as correctly as I can tell. I have been running mailman on another system for a while so I am fairly familiar with it. When I create my first list, test. It doesn't show up on the listinfo page but I can get to the admin page and the listinfo/test page. It also shows up on the /admin page and I can manage it just fine. Ideas? Bill -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
[Mailman-Users] No public lists?
I've installed mailman 2.0.13 fresh and configure everything as correctly as I can tell. I have been running mailman on another system for a while so I am fairly familiar with it. When I create my first list, test. It doesn't show up on the listinfo page but I can get to the admin page and the listinfo/test page. It also shows up on the /admin page and I can manage it just fine. Ideas? Bill -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
[Mailman-Users] No public lists any more
Yesterday I set up and configured a few lists as public lists, and that worked: they were shown on the listinfo page of the server. Today they do not show up, the listinfo page claims that there are no public lists at the server. But I did not change anything! And if I look into the configuration web pages of every list they are set as public. Was is going on there? Thanks for any help and hint. Dirk -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
[Mailman-Users] editing public lists pages
Hi, Can someone please help me? I am having difficulty editing some of my public list pages for my mailman list. On my user options page, I am unable to submit my changes after I click on the submit button. Why? Also, the page no longer displays the specific user name when it is activated. Did I delete a preset mailman command? if so, how can I get it back? Thank you. -- Mailman-Users maillist - [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-users
