Re: [MlMt] Keyboard shortcut to upgrade to pre-release not working
Ouch! I don't normally upgrade using the test build archive and thought it was something to do with the re-install of macOS because I've never seen this before. Anyhow, thanks for everyones response and feedback. -C On 21 Mar 2023, at 10:04, Bill Cole wrote: On 2023-03-20 at 19:30:21 UTC-0400 (Mon, 20 Mar 2023 16:30:21 -0700) Chris Jones is rumored to have said: Hey Henry, Thanks for your response and feedback. If I go to the menubar and click on MailMate and then hold down the ⌥ key, it changes from "Check for Update" to "Check for Test Build", so I know the ⌥ key is working as it should. But when I click on "Check for Test Build" after pressing the ⌥ key, I'm presented with the prompt: "**You are Using a Prerelease**". At the moment I've manually upgraded to version 5958 and yet I'm still seeing this which is strange as this never used to happen. It's what you get for upgrading to a test release manually. 5958 is later than the latest official "Test Build" seen by the update machinery. -- Bill Cole b...@scconsult.com or billc...@apache.org (AKA @grumpybozo and many *@billmail.scconsult.com addresses) Not Currently Available For Hire ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Keyboard shortcut to upgrade to pre-release not working
I eat my words then, maybe thats what's happening. I'll try downgrading to 5950 then to see if I see this behaviour. -C On 21 Mar 2023, at 5:03, Jolin Warren wrote: Late to the party, but I’m pretty sure this is the reason. I’m on r5950 and checking for a new Test Build tells me I’m on the latest one. Benny said in an earlier email that he hasn’t put anything newer into the test build release stream because of several crashing bugs (maybe now resolved?). Chris, since you’re ahead of the ‘latest’ Test Build, I’m not surprised it’s offering to downgrade you. This will probably be the case until something newer is released into the Test Build release stream. On 21 Mar 2023, at 1:07, Eric Sharakan wrote: Hi, a bit of a shot in the dark: could it be that because these are not "released" test builds from Benny, that the update check logic might not be working? Or perhaps it is working, but just wanting to downgrade you to r5950 (which is the latest "released" test build)? -Eric On 20 Mar 2023, at 20:47, Chris Jones wrote: I just tried creating another account on my Mac, this is a clean install I did a few days ago and the same thing occurred under this user account. It's a brand new user profile that doesn't have any legacy profile data laying around and Mailmate starts as if it's a new user. Not sure what to say at this point. Especially since I've updated Mailmate once since doing the fresh install. When I updated it I downloaded the latest test release from the updates archive page and replaced MailMate. So realistically it's a fresh copy of the application. 路 -C On 20 Mar 2023, at 17:20, Henry Seiden wrote: Chris, Do you have a way to try it either in a different user on the same machine or on a different machine to verify whether it’s the Mac hardware or the user settings causing this alone? I’m thinking it’s not MM. Hane not seen this reported by others and I have not had this ever. Although I do remember a different key combo bringing up the warning, just not which one (obviously not the one you are using apparently). Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 19:30, Chris Jones wrote: Hey Henry, Thanks for your response and feedback. If I go to the menubar and click on MailMate and then hold down the ⌥ key, it changes from "Check for Update" to "Check for Test Build", so I know the ⌥ key is working as it should. But when I click on "Check for Test Build" after pressing the ⌥ key, I'm presented with the prompt: "**You are Using a Prerelease**". At the moment I've manually upgraded to version 5958 and yet I'm still seeing this which is strange as this never used to happen. -Chris On 20 Mar 2023, at 14:11, Henry Seiden wrote: Chris, Should be as you said, ⌥ + Menu> ‘Check Now’ dropdown. It works here in both release and beta for me in OS 13.2.1 and 13.3 on MM 1.14 5950 and later. Is your keyboard somehow buggered up gloving you the codes (maybe ⌘ instead?). You can bring up a layout screen to confirm. Open Keyboard Settings to check. Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 15:46, Chris Jones wrote: I'm not sure if this has to do with restoring my Mac from a backup, but I'm not longer able to use the keyboard shortcut ⌥ + "Check Now" under the Software Update section of___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate -- => Jolin ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Keyboard shortcut to upgrade to pre-release not working
Hey Eric, I believe all the test builds will show up when you ⌥ + click "Check for Test Build". At least that's the behaviour I've always seen before and I've never run into this issue until re-installing my system. -Chris On 20 Mar 2023, at 18:07, Eric Sharakan wrote: Hi, a bit of a shot in the dark: could it be that because these are not "released" test builds from Benny, that the update check logic might not be working? Or perhaps it is working, but just wanting to downgrade you to r5950 (which is the latest "released" test build)? -Eric On 20 Mar 2023, at 20:47, Chris Jones wrote: I just tried creating another account on my Mac, this is a clean install I did a few days ago and the same thing occurred under this user account. It's a brand new user profile that doesn't have any legacy profile data laying around and Mailmate starts as if it's a new user. Not sure what to say at this point. Especially since I've updated Mailmate once since doing the fresh install. When I updated it I downloaded the latest test release from the updates archive page and replaced MailMate. So realistically it's a fresh copy of the application. 路 -C On 20 Mar 2023, at 17:20, Henry Seiden wrote: Chris, Do you have a way to try it either in a different user on the same machine or on a different machine to verify whether it’s the Mac hardware or the user settings causing this alone? I’m thinking it’s not MM. Hane not seen this reported by others and I have not had this ever. Although I do remember a different key combo bringing up the warning, just not which one (obviously not the one you are using apparently). Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 19:30, Chris Jones wrote: Hey Henry, Thanks for your response and feedback. If I go to the menubar and click on MailMate and then hold down the ⌥ key, it changes from "Check for Update" to "Check for Test Build", so I know the ⌥ key is working as it should. But when I click on "Check for Test Build" after pressing the ⌥ key, I'm presented with the prompt: "**You are Using a Prerelease**". At the moment I've manually upgraded to version 5958 and yet I'm still seeing this which is strange as this never used to happen. -Chris On 20 Mar 2023, at 14:11, Henry Seiden wrote: Chris, Should be as you said, ⌥ + Menu> ‘Check Now’ dropdown. It works here in both release and beta for me in OS 13.2.1 and 13.3 on MM 1.14 5950 and later. Is your keyboard somehow buggered up gloving you the codes (maybe ⌘ instead?). You can bring up a layout screen to confirm. Open Keyboard Settings to check. Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 15:46, Chris Jones wrote: I'm not sure if this has to do with restoring my Mac from a backup, but I'm not longer able to use the keyboard shortcut ⌥ + "Check Now" under the Software Update section of___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Keyboard shortcut to upgrade to pre-release not working
I just tried creating another account on my Mac, this is a clean install I did a few days ago and the same thing occurred under this user account. It's a brand new user profile that doesn't have any legacy profile data laying around and Mailmate starts as if it's a new user. Not sure what to say at this point. Especially since I've updated Mailmate once since doing the fresh install. When I updated it I downloaded the latest test release from the updates archive page and replaced MailMate. So realistically it's a fresh copy of the application. 路 -C On 20 Mar 2023, at 17:20, Henry Seiden wrote: Chris, Do you have a way to try it either in a different user on the same machine or on a different machine to verify whether it’s the Mac hardware or the user settings causing this alone? I’m thinking it’s not MM. Hane not seen this reported by others and I have not had this ever. Although I do remember a different key combo bringing up the warning, just not which one (obviously not the one you are using apparently). Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 19:30, Chris Jones wrote: Hey Henry, Thanks for your response and feedback. If I go to the menubar and click on MailMate and then hold down the ⌥ key, it changes from "Check for Update" to "Check for Test Build", so I know the ⌥ key is working as it should. But when I click on "Check for Test Build" after pressing the ⌥ key, I'm presented with the prompt: "**You are Using a Prerelease**". At the moment I've manually upgraded to version 5958 and yet I'm still seeing this which is strange as this never used to happen. -Chris On 20 Mar 2023, at 14:11, Henry Seiden wrote: Chris, Should be as you said, ⌥ + Menu> ‘Check Now’ dropdown. It works here in both release and beta for me in OS 13.2.1 and 13.3 on MM 1.14 5950 and later. Is your keyboard somehow buggered up gloving you the codes (maybe ⌘ instead?). You can bring up a layout screen to confirm. Open Keyboard Settings to check. Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 15:46, Chris Jones wrote: I'm not sure if this has to do with restoring my Mac from a backup, but I'm not longer able to use the keyboard shortcut ⌥ + "Check Now" under the Software Update section of___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Keyboard shortcut to upgrade to pre-release not working
Hey Henry, Thanks for your response and feedback. If I go to the menubar and click on MailMate and then hold down the ⌥ key, it changes from "Check for Update" to "Check for Test Build", so I know the ⌥ key is working as it should. But when I click on "Check for Test Build" after pressing the ⌥ key, I'm presented with the prompt: "**You are Using a Prerelease**". At the moment I've manually upgraded to version 5958 and yet I'm still seeing this which is strange as this never used to happen. -Chris On 20 Mar 2023, at 14:11, Henry Seiden wrote: Chris, Should be as you said, ⌥ + Menu> ‘Check Now’ dropdown. It works here in both release and beta for me in OS 13.2.1 and 13.3 on MM 1.14 5950 and later. Is your keyboard somehow buggered up gloving you the codes (maybe ⌘ instead?). You can bring up a layout screen to confirm. Open Keyboard Settings to check. Respectfully, Henry Seiden - - Techworks Pro Co. E: infotechworksprocom W: http://techworkspro.com On 20 Mar 2023, at 15:46, Chris Jones wrote: I'm not sure if this has to do with restoring my Mac from a backup, but I'm not longer able to use the keyboard shortcut ⌥ + "Check Now" under the Software Update section of___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
[MlMt] Keyboard shortcut to upgrade to pre-release not working
Good afternoon, I'm not sure if this has to do with restoring my Mac from a backup, but I'm not longer able to use the keyboard shortcut ⌥ + "Check Now" under the Software Update section of preferences to check for test releases. When I check now it says I'm running a pre-release and gives me the option to downgrade. In the past Mailmate would let me know if there was a new pre-release or if I was running the latest pre-release. I also checked using ⌘ + "Check Now" but I get the same results. As a workaround I'm just downloading from the updates archive URL but I would like to figure out why this isn't working. Cheers, -Chris___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Showing raw message headers are blurry
Thanks Benny. It works for me! -Chris On Fri, Feb 3, 2023, at 7:37 AM, Benny Kjær Nielsen wrote: > On 29 Jan 2023, at 17:26, Chris Jones wrote: > > > Glad it's not just me. Workaround for me right now is to copy text into Vim > > so I can read until this this is fixed. I'm also using Ventura 13.2. > > The blurry text issue should be fixed in r5941. It was triggered by a > combination of large messages (messages with attachments) and at least one > long line (only a problem on Ventura I think). > > The fix has not made the raw mode faster for large messages which is still a > problem. > > -- > Benny > https://freron.com/become_a_mailmate_patron/ > ___ > mailmate mailing list > mailmate@lists.freron.com > https://lists.freron.com/listinfo/mailmate > ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Showing raw message headers are blurry
Thanks Benny, Glad it's not just me. Workaround for me right now is to copy text into Vim so I can read until this this is fixed. I'm also using Ventura 13.2. Cheers, -Chris On 29 Jan 2023, at 1:04, Benny Kjær Nielsen wrote: On 28 Jan 2023, at 19:25, Chris Jones wrote: With the latest beta of Mailmate (5937) and showing the raw message (headers) the text is blurry and sometimes quite blurry (see link below). Any ideas of how to fix this? No, but the good news is that I've seen this issue myself. In my case, it is not triggered by all emails, but I've got one for which it appears to be reliably reproducible. I've mostly switched to Ventura on my development machine now which hopefully means that Ventura-only related issues will be more likely to be fixed. (There's a couple of Ventura-related fixes in a test release today, but this does not include a fix for this particular issue.) -- Benny https://freron.com/become_a_mailmate_patron/ ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
[MlMt] Showing raw message headers are blurry
Good morning, With the latest beta of Mailmate (5937) and showing the raw message (headers) the text is blurry and sometimes quite blurry (see link below). Any ideas of how to fix this? https://share.icloud.com/photos/06eeFWSYtG919CnpGH3SFWYDw Cheers, -Chris___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Asana Integration Bundle
Thanks Max! I guess I should have spent some more time looking at bundles/commands ;) -C On 18 Nov 2019, at 11:49, Max Rydahl Andersen wrote: Select your message or messages: Command > MailMate > Copy Link to Message(s) /max https://xam.dk/about On 18 Nov 2019, at 20:17, Chris Jones wrote: Hey Benny, Any chance I can work with you off list to build a bundle for Asana? Our company has fully invested in using Asana for project/task management and I would hate to lose my ability to link emails to tasks. Also, as an interim bandaid, is there a way to quickly copy the message:// link for a given email so I can insert this into an Asana task? Cheers, -Chris On 10 Apr 2015, at 0:51, Benny Kjær Nielsen wrote: On 10 Apr 2015, at 5:16, Chris Jones wrote: I'm not sure if I'm reaching for the stars here but would it be possible to build a bundle to integrate MailMate with Asana? A quick look on the API reveals that `curl` can be used to create a task: curl -u : https://app.asana.com/api/1.0/tasks \ -d "assignee=1235" \ -d "followers[0]=5678" \ -d "name=Hello, world%21" \ -d "notes=How are you today%3F" \ -d "projects=14641" \ -d "workspace=14916" Since Asana is a webapp would it be possible to open the email in MailMate from Asana? That's not a problem. MailMate can generate `message:` URLs and they are opened by MailMate if MailMate is the default email client (it also works for Apple Mail). Asana is becoming quite popular amongst teams so it would probably add value to MailMate's bundle offering. I don't currently have the time to create new bundles. I imagine it would be easiest to use the Todoist bundle as a starting point for creating an Asana bundle since it also requires the use of an API key (named a token in Todoist I think), but it seems that for Asana this is not the only variable needed (projects, assignee?, workspace?). Well, it's probably faster for me to create a bundle than it is to explain how it's done. You can contact me off list if you would like to help that happen. Primarily, I need you to play with the `curl` commands needed to do what you want with Asana. -- Benny ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate <http://lists.freron.com/listinfo/mailmate> ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Asana Integration Bundle
Hey Benny, Any chance I can work with you off list to build a bundle for Asana? Our company has fully invested in using Asana for project/task management and I would hate to lose my ability to link emails to tasks. Also, as an interim bandaid, is there a way to quickly copy the message:// link for a given email so I can insert this into an Asana task? Cheers, -Chris On 10 Apr 2015, at 0:51, Benny Kjær Nielsen wrote: On 10 Apr 2015, at 5:16, Chris Jones wrote: I'm not sure if I'm reaching for the stars here but would it be possible to build a bundle to integrate MailMate with Asana? A quick look on the API reveals that `curl` can be used to create a task: curl -u : https://app.asana.com/api/1.0/tasks \ -d "assignee=1235" \ -d "followers[0]=5678" \ -d "name=Hello, world%21" \ -d "notes=How are you today%3F" \ -d "projects=14641" \ -d "workspace=14916" Since Asana is a webapp would it be possible to open the email in MailMate from Asana? That's not a problem. MailMate can generate `message:` URLs and they are opened by MailMate if MailMate is the default email client (it also works for Apple Mail). Asana is becoming quite popular amongst teams so it would probably add value to MailMate's bundle offering. I don't currently have the time to create new bundles. I imagine it would be easiest to use the Todoist bundle as a starting point for creating an Asana bundle since it also requires the use of an API key (named a token in Todoist I think), but it seems that for Asana this is not the only variable needed (projects, assignee?, workspace?). Well, it's probably faster for me to create a bundle than it is to explain how it's done. You can contact me off list if you would like to help that happen. Primarily, I need you to play with the `curl` commands needed to do what you want with Asana. -- Benny ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate <http://lists.freron.com/listinfo/mailmate> ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
[MlMt] HTML signature causing display issues with markdown
Good morning, With my work email account I have an HTML signature which unfortunately I'm required to use. It's causing me much grief when composing new messages or replying to messages in Markdown. Basically the Markdown becomes unusable. Tables lose their formatting (the cell lines disappear, etc) and when replying to a message, the quoted text no longer has the nice blue highlighting and vertical line on the left side (the text just ends up being indented). I know I've read that HTML signatures are supposed to work in both Markdown and plain text messages but I'm struggling to get it to work. If need be I can supply the HMTL used for my signature if that will help with debugging. Cheers, -Chris ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] HTML Signature Display Issue
Hi Benny, My apologies, I double posted as I didn't see my original post come through on the list. I've just checked and the signature displays just fine when received. Thanks for pointing that out. Cheers, -Chris On 9 Mar 2016, at 14:16, Benny Kjær Nielsen wrote: On 9 Mar 2016, at 20:01, Chris Jones wrote: I'm running into an issue when forwarding messages. My company email signature which references a couple of logos hosted on our web server are not displaying when I forward an email. It just displays grey bordered boxes around the areas where the logos are supposed to be displayed. I think you either accidentally re-posted this issue or you missed my answer: https://www.mail-archive.com/mailmate@lists.freron.com/msg05813.html -- Benny ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
[MlMt] HTML Signature Display Issue
Good afternoon, I'm running into an issue when forwarding messages. My company email signature which references a couple of logos hosted on our web server are not displaying when I forward an email. It just displays grey bordered boxes around the areas where the logos are supposed to be displayed. If I compose a new message or reply to an email I do not run into this issue (the signature displays normally). I've only just starting using HTML signature with logos in it so I've never noticed this before. I'm currently running version Version 1.9.4 (5226). Cheers, -Chris ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
[MlMt] HTML Signature Display Issue - Forwarding Message
Good afternoon, I'm running into an issue when forwarding messages. My company email signature which references a couple of logos hosted on our web server are not displaying when I forward an email. It just displays grey bordered boxes around the areas where the logos are supposed to be displayed. If I compose a new message or reply to an email I do not run into this issue (the signature displays normally). I've only just starting using HTML signature with logos in it so I've never noticed this before. I'm currently running version Version 1.9.4 (5226). Cheers, -Chris ___ mailmate mailing list mailmate@lists.freron.com https://lists.freron.com/listinfo/mailmate
Re: [MlMt] Widescreen Layout - A la Postbox
Hi Benny, is this something that could be tweaked with ease? On 15 Apr 2015, at 13:30, John Cooper wrote: On 2015-04-15 14:55, Allie Martin wrote: I'd seriously love to see this as well. Me too! On 15 Apr 2015, at 14:46, Chris Jones wrote: Hi Benny et al, Just wondering if it would be feasible to tweak the widescreen layout for more optimal use of space. For example I used to use Postbox and the vertical view would display the message list with information of each message in a stacked view (FROM and DATE would be on one row and SUBJECT would be on the row below it -- condensing the width required). This does require an extra bit of vertical space to display a message in the list, however, in my opinion makes for a much more pleasant look. I find I'm constantly resizing the message list pane. For a visual of this, please see the following page and search for VERTICAL THREAD PANE VIEW http://www.postbox-inc.com/features [1] Cheers, -Chris___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate [2] ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate [2] Links: -- [1] http://www.postbox-inc.com/features [2] http://lists.freron.com/listinfo/mailmate ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate
[MlMt] Widescreen Layout - A la Postbox
Hi Benny et al, Just wondering if it would be feasible to tweak the widescreen layout for more optimal use of space. For example I used to use Postbox and the vertical view would display the message list with information of each message in a stacked view (**From** and **Date** would be on one row and **Subject** would be on the row below it — condensing the width required). This does require an extra bit of vertical space to display a message in the list, however, in my opinion makes for a much more pleasant look. I find I'm constantly resizing the message list pane. For a visual of this, please see the following page and search for **Vertical Thread Pane View** http://www.postbox-inc.com/features Cheers, -Chris___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate
Re: [MlMt] Asana Integration Bundle
Thanks Benny, I will have a peak at required curl commands and get back to you once I have something working. Cheers, -Chris On 10 Apr 2015, at 0:51, Benny Kjær Nielsen wrote: On 10 Apr 2015, at 5:16, Chris Jones wrote: I'm not sure if I'm reaching for the stars here but would it be possible to build a bundle to integrate MailMate with Asana? A quick look on the API reveals that `curl` can be used to create a task: curl -u api_key: https://app.asana.com/api/1.0/tasks \ -d assignee=1235 \ -d followers[0]=5678 \ -d name=Hello, world%21 \ -d notes=How are you today%3F \ -d projects=14641 \ -d workspace=14916 Since Asana is a webapp would it be possible to open the email in MailMate from Asana? That's not a problem. MailMate can generate `message:` URLs and they are opened by MailMate if MailMate is the default email client (it also works for Apple Mail). Asana is becoming quite popular amongst teams so it would probably add value to MailMate's bundle offering. I don't currently have the time to create new bundles. I imagine it would be easiest to use the Todoist bundle as a starting point for creating an Asana bundle since it also requires the use of an API key (named a token in Todoist I think), but it seems that for Asana this is not the only variable needed (projects, assignee?, workspace?). Well, it's probably faster for me to create a bundle than it is to explain how it's done. You can contact me off list if you would like to help that happen. Primarily, I need you to play with the `curl` commands needed to do what you want with Asana. -- Benny ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate ___ mailmate mailing list mailmate@lists.freron.com http://lists.freron.com/listinfo/mailmate
