Re: [MBZ] 123 part search

2021-08-14 Thread Jim Cathey via Mercedes
> Could a R107 strap work? ( not knowing, since I have not needed to do those 
> straps).  From my PnP scrounging  tours, the check straps for w115, 116, 123 
> and 126 all looked very much alike.

Never looked at a 116.  IIRC 115 has had both types, the roller on leaf spring
and the sliding ball detent types.  Never seen anything but the latter in 
123/126.
Never seen anything but roller on cam in 107.  Never seen a broken 107 strap,
they seem to be significantly more robust than the others.  It may be that the
bodies are not pot metal, unlike the 115.  It's the pot metal that always fails.

-- Jim


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread Clay via Mercedes
Could a R107 strap work? ( not knowing, since I have not needed to do those 
straps).  From my PnP scrounging  tours, the check straps for w115, 116, 123 
and 126 all looked very much alike.  I did not get to scrounge many coupes.  I 
do recall the w124 had different sort of check strap than earlier.


clay 

I have no pronouns please do not refer to me.



> On Aug 13, 2021, at 7:47 AM, Jim Cathey via Mercedes  
> wrote:
> 
>> I realize the coupe door is longer, so I wonder how much that 114mm 
>> translates into door swing?
> 
> Also heavier.  I suspect that this is a greater factor than the swing.
> 
> -- Jim
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread dan penoff.com via Mercedes
Good idea!

Be sure the old one doesn’t have a failed strap, that is, the two captive metal 
balls that have the spring between them. That’s another failure mode for these 
as well. The peened metal that holds one of the balls captive in the strap can 
fail, and the ball pops out into the door cavity.

-D

> On Aug 13, 2021, at 4:15 PM, Dwight Giles via Mercedes 
>  wrote:
> 
> Thanks curt but I think we will skipwelding. Might try to rebuild old one
> or buy 100 & fit 114mm strap to new check.
> 
> Dwight Giles Jr.
> Wickford RI
> 
> CHOWDAHQ 14 on Sept 12.
> 
>> On Thu, Aug 12, 2021, 8:43 PM Curt Raymond  wrote:
>> 
>> 14mm is about half an inch although I don't suppose the precise length
>> matters all that much. Somebody that was good with a welder should be able
>> to cut a sedan version and add half an inch of strap steel. A TIG welder
>> would be best for fine control and minimal splatter but I could
>> (eventually) probably make one with my MIG setup.
>> 
>> -Curt
>> 
>> On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>> 
>> I am looking for a door stop/check strap for a 123 coupe.  They are
>> different from sedan and wagon. MB Classic has one for 250.00. (ouch)
>> Yesterday I found a URO one for much cheaper but I can't find it today.
>> Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
>> Does Anybody have a good used one or know of a source? I have tried all the
>> major sources.
>> TIA
>> Dwight
>> 
>> Dwight E. Giles Jr.
>> 1982 300CD
>> 2005 E320 4matic
>> Wickford RI
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread Dwight Giles via Mercedes
Thanks curt but I think we will skipwelding. Might try to rebuild old one
or buy 100 & fit 114mm strap to new check.

Dwight Giles Jr.
Wickford RI

CHOWDAHQ 14 on Sept 12.

On Thu, Aug 12, 2021, 8:43 PM Curt Raymond  wrote:

> 14mm is about half an inch although I don't suppose the precise length
> matters all that much. Somebody that was good with a welder should be able
> to cut a sedan version and add half an inch of strap steel. A TIG welder
> would be best for fine control and minimal splatter but I could
> (eventually) probably make one with my MIG setup.
>
> -Curt
>
> On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via Mercedes <
> mercedes@okiebenz.com> wrote:
>
>
> I am looking for a door stop/check strap for a 123 coupe.  They are
> different from sedan and wagon. MB Classic has one for 250.00. (ouch)
> Yesterday I found a URO one for much cheaper but I can't find it today.
> Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
> Does Anybody have a good used one or know of a source? I have tried all the
> major sources.
> TIA
> Dwight
>
> Dwight E. Giles Jr.
> 1982 300CD
> 2005 E320 4matic
> Wickford RI
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread dan penoff.com via Mercedes
You need the wider sweep to better get in and out. Longer door = less angle to 
open, meaning it has to angle out farther to allow easy egress/ingress.

Having owned one of these as well as an R129 I can attest to the need for the 
wider sweep.

-D

Sent from my iPad

> On Aug 13, 2021, at 11:30 AM, Mitch Haley via Mercedes 
>  wrote:
> 
> Does anybody, for example South Carolina Floyd, have a 123 coupe and a 123 
> sedan/wagon handy?
> If so, what's the angular difference between the fully opened doors, and why 
> would the larger door need a wider sweep angle, other than to whack nearby 
> parked cars with?
> 
> 
>> On 2021-08-13 11:20, dan penoff.com via Mercedes wrote:
>> 
>> I also wonder if you couldn’t use a sedan version and just have a
>> limited door swing. I realize the coupe door is longer, so I wonder
>> how much that 114mm translates into door swing?
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread Jim Cathey via Mercedes
> I realize the coupe door is longer, so I wonder how much that 114mm 
> translates into door swing?

Also heavier.  I suspect that this is a greater factor than the swing.

-- Jim


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread Mitch Haley via Mercedes
Does anybody, for example South Carolina Floyd, have a 123 coupe and a 
123 sedan/wagon handy?
If so, what's the angular difference between the fully opened doors, and 
why would the larger door need a wider sweep angle, other than to whack 
nearby parked cars with?



On 2021-08-13 11:20, dan penoff.com via Mercedes wrote:


I also wonder if you couldn’t use a sedan version and just have a
limited door swing. I realize the coupe door is longer, so I wonder
how much that 114mm translates into door swing?


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread Curt Raymond via Mercedes
 I was thinking the same thing, I don't think 1/2" is going to translate into a 
whole lot less door swing...

-Curt

On Friday, August 13, 2021, 11:20:57 AM EDT, dan penoff.com via Mercedes 
 wrote:  
 
 Typically the “balls” that support the roller wear out or fall out, preventing 
the roller from moving along the slide. They can also freeze in place, 
preventing the door from being opened/closed.

I also wonder if you couldn’t use a sedan version and just have a limited door 
swing. I realize the coupe door is longer, so I wonder how much that 114mm 
translates into door swing?

-D

> On Aug 13, 2021, at 11:02 AM, Randy Bennell via Mercedes 
>  wrote:
> 
> My thoughts exactly, Curt. If there is no real difference apart from length, 
> it ought to be reasonably easy to add some metal.
> Did Dwight ever say what was wrong with the original? Maybe it could be 
> repaired?
> 
> 
> 
> On 12/08/2021 7:43 PM, Curt Raymond via Mercedes wrote:
>>  14mm is about half an inch although I don't suppose the precise length 
>>matters all that much. Somebody that was good with a welder should be able to 
>>cut a sedan version and add half an inch of strap steel. A TIG welder would 
>>be best for fine control and minimal splatter but I could (eventually) 
>>probably make one with my MIG setup.
>> -Curt
>> 
>>    On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via Mercedes 
>> wrote:
>>    I am looking for a door stop/check strap for a 123 coupe.  They are
>> different from sedan and wagon. MB Classic has one for 250.00. (ouch)
>> Yesterday I found a URO one for much cheaper but I can't find it today.
>> Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
>> Does Anybody have a good used one or know of a source? I have tried all the
>> major sources.
>> TIA
>> Dwight
>> 
>> Dwight E. Giles Jr.
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread dan penoff.com via Mercedes
Typically the “balls” that support the roller wear out or fall out, preventing 
the roller from moving along the slide. They can also freeze in place, 
preventing the door from being opened/closed.

I also wonder if you couldn’t use a sedan version and just have a limited door 
swing. I realize the coupe door is longer, so I wonder how much that 114mm 
translates into door swing?

-D

> On Aug 13, 2021, at 11:02 AM, Randy Bennell via Mercedes 
>  wrote:
> 
> My thoughts exactly, Curt. If there is no real difference apart from length, 
> it ought to be reasonably easy to add some metal.
> Did Dwight ever say what was wrong with the original? Maybe it could be 
> repaired?
> 
> 
> 
> On 12/08/2021 7:43 PM, Curt Raymond via Mercedes wrote:
>>  14mm is about half an inch although I don't suppose the precise length 
>> matters all that much. Somebody that was good with a welder should be able 
>> to cut a sedan version and add half an inch of strap steel. A TIG welder 
>> would be best for fine control and minimal splatter but I could (eventually) 
>> probably make one with my MIG setup.
>> -Curt
>> 
>> On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via Mercedes 
>>  wrote:
>>I am looking for a door stop/check strap for a 123 coupe.  They are
>> different from sedan and wagon. MB Classic has one for 250.00. (ouch)
>> Yesterday I found a URO one for much cheaper but I can't find it today.
>> Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
>> Does Anybody have a good used one or know of a source? I have tried all the
>> major sources.
>> TIA
>> Dwight
>> 
>> Dwight E. Giles Jr.
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread OK Don via Mercedes
Or just fabricate a new one from parts or new stock.

On Fri, Aug 13, 2021 at 10:03 AM Randy Bennell via Mercedes <
mercedes@okiebenz.com> wrote:

> My thoughts exactly, Curt. If there is no real difference apart from
> length, it ought to be reasonably easy to add some metal.
> Did Dwight ever say what was wrong with the original? Maybe it could be
> repaired?
>
>
>
> On 12/08/2021 7:43 PM, Curt Raymond via Mercedes wrote:
> >   14mm is about half an inch although I don't suppose the precise length
> matters all that much. Somebody that was good with a welder should be able
> to cut a sedan version and add half an inch of strap steel. A TIG welder
> would be best for fine control and minimal splatter but I could
> (eventually) probably make one with my MIG setup.
> > -Curt
> >
> >  On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via
> Mercedes  wrote:
> >
> >   I am looking for a door stop/check strap for a 123 coupe.  They are
> > different from sedan and wagon. MB Classic has one for 250.00. (ouch)
> > Yesterday I found a URO one for much cheaper but I can't find it today.
> > Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
> > Does Anybody have a good used one or know of a source? I have tried all
> the
> > major sources.
> > TIA
> > Dwight
> >
> > Dwight E. Giles Jr.
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>

-- 
OK Don

"Whenever you find yourself on the side of the majority, it is time to
pause and reflect." Mark Twain

“Basic research is what I’m doing when I don’t know what I am doing.”  Wernher
Von Braun
2013 F150, 18 mpg
2017 Subaru Legacy, 30 mpg
1957 C182A, 12 mpg - but at 150 mph!
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-13 Thread Randy Bennell via Mercedes
My thoughts exactly, Curt. If there is no real difference apart from 
length, it ought to be reasonably easy to add some metal.
Did Dwight ever say what was wrong with the original? Maybe it could be 
repaired?




On 12/08/2021 7:43 PM, Curt Raymond via Mercedes wrote:

  14mm is about half an inch although I don't suppose the precise length 
matters all that much. Somebody that was good with a welder should be able to 
cut a sedan version and add half an inch of strap steel. A TIG welder would be 
best for fine control and minimal splatter but I could (eventually) probably 
make one with my MIG setup.
-Curt

 On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via Mercedes 
 wrote:
  
  I am looking for a door stop/check strap for a 123 coupe.  They are

different from sedan and wagon. MB Classic has one for 250.00. (ouch)
Yesterday I found a URO one for much cheaper but I can't find it today.
Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
Does Anybody have a good used one or know of a source? I have tried all the
major sources.
TIA
Dwight

Dwight E. Giles Jr.



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread Andrew Strasfogel via Mercedes
Bastids!

On Thu, Aug 12, 2021, 9:46 PM Dimitri Seretakis via Mercedes <
mercedes@okiebenz.com> wrote:

> MB cares a hell of a lot more than BMW. Try getting parts for a BMW 2002
> through the dealer. They won’t even recognize the VIN.
>
> Sent from my iPhone
>
> > On Aug 12, 2021, at 7:29 PM, Jaime Kopchinski via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > Perfect example of MB stepping up and building new parts that were
> > previously NLA.
> >
> > And they say MB doesn’t care….
> >
> >> On Thu, Aug 12, 2021 at 6:07 PM Dwight Giles via Mercedes <
> >> mercedes@okiebenz.com> wrote:
> >>
> >> Yes rare. Classic center said they just remade some. It is for a friend
> of
> >> mine. Mine was changed when I bought it.
> >>
> >> Dwight Giles Jr.
> >> Wickford RI
> >>
> >> On Thu, Aug 12, 2021, 5:56 PM dan penoff.com via Mercedes <
> >> mercedes@okiebenz.com> wrote:
> >>
> >>> I did some digging and only came up with the OE part. You can find it
> at
> >> a
> >>> number of the RevParts sellers for under $250.00, but I don’t see any
> >>> alternatives.
> >>>
> >>> Sorry.
> >>>
> >>> If it’s any consolation they’re trading on eBay for upwards of $350 for
> >>> the uninitiated.
> >>>
> >>> I would say to bite the bullet and buy an OE one and move on. I’m
> >>> surprised they’re still available considering the relatively small
> >>> application base.
> >>>
> >>> -D
> >>>
>  On Aug 12, 2021, at 5:31 PM, Dwight Giles via Mercedes <
> >>> mercedes@okiebenz.com> wrote:
> 
>  I am looking for a door stop/check strap for a 123 coupe.  They are
>  different from sedan and wagon. MB Classic has one for 250.00. (ouch)
>  Yesterday I found a URO one for much cheaper but I can't find it
> today.
>  Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
>  Does Anybody have a good used one or know of a source? I have tried
> all
> >>> the
>  major sources.
>  TIA
>  Dwight
> 
>  Dwight E. Giles Jr.
>  1982 300CD
>  2005 E320 4matic
>  Wickford RI
>  ___
>  http://www.okiebenz.com
> 
>  To search list archives http://www.okiebenz.com/archive/
> 
>  To Unsubscribe or change delivery options go to:
>  http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> >>>
> >>> ___
> >>> http://www.okiebenz.com
> >>>
> >>> To search list archives http://www.okiebenz.com/archive/
> >>>
> >>> To Unsubscribe or change delivery options go to:
> >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>>
> >>>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >> --
> > Jaime Kopchinski
> > http://www.jaimekop.com/
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread Dimitri Seretakis via Mercedes
MB cares a hell of a lot more than BMW. Try getting parts for a BMW 2002 
through the dealer. They won’t even recognize the VIN.

Sent from my iPhone

> On Aug 12, 2021, at 7:29 PM, Jaime Kopchinski via Mercedes 
>  wrote:
> 
> Perfect example of MB stepping up and building new parts that were
> previously NLA.
> 
> And they say MB doesn’t care….
> 
>> On Thu, Aug 12, 2021 at 6:07 PM Dwight Giles via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>> Yes rare. Classic center said they just remade some. It is for a friend of
>> mine. Mine was changed when I bought it.
>> 
>> Dwight Giles Jr.
>> Wickford RI
>> 
>> On Thu, Aug 12, 2021, 5:56 PM dan penoff.com via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>>> I did some digging and only came up with the OE part. You can find it at
>> a
>>> number of the RevParts sellers for under $250.00, but I don’t see any
>>> alternatives.
>>> 
>>> Sorry.
>>> 
>>> If it’s any consolation they’re trading on eBay for upwards of $350 for
>>> the uninitiated.
>>> 
>>> I would say to bite the bullet and buy an OE one and move on. I’m
>>> surprised they’re still available considering the relatively small
>>> application base.
>>> 
>>> -D
>>> 
 On Aug 12, 2021, at 5:31 PM, Dwight Giles via Mercedes <
>>> mercedes@okiebenz.com> wrote:
 
 I am looking for a door stop/check strap for a 123 coupe.  They are
 different from sedan and wagon. MB Classic has one for 250.00. (ouch)
 Yesterday I found a URO one for much cheaper but I can't find it today.
 Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
 Does Anybody have a good used one or know of a source? I have tried all
>>> the
 major sources.
 TIA
 Dwight
 
 Dwight E. Giles Jr.
 1982 300CD
 2005 E320 4matic
 Wickford RI
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> --
> Jaime Kopchinski
> http://www.jaimekop.com/
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread Curt Raymond via Mercedes
 14mm is about half an inch although I don't suppose the precise length matters 
all that much. Somebody that was good with a welder should be able to cut a 
sedan version and add half an inch of strap steel. A TIG welder would be best 
for fine control and minimal splatter but I could (eventually) probably make 
one with my MIG setup.
-Curt

On Thursday, August 12, 2021, 5:37:14 PM EDT, Dwight Giles via Mercedes 
 wrote:  
 
 I am looking for a door stop/check strap for a 123 coupe.  They are
different from sedan and wagon. MB Classic has one for 250.00. (ouch)
Yesterday I found a URO one for much cheaper but I can't find it today.
Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
Does Anybody have a good used one or know of a source? I have tried all the
major sources.
TIA
Dwight

Dwight E. Giles Jr.
1982 300CD
2005 E320 4matic
Wickford RI
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread Dwight Giles via Mercedes
Yes. Gotta love the classic Center.

Dwight Giles Jr.
Wickford RI

On Thu, Aug 12, 2021, 7:29 PM Jaime Kopchinski via Mercedes <
mercedes@okiebenz.com> wrote:

> Perfect example of MB stepping up and building new parts that were
> previously NLA.
>
> And they say MB doesn’t care….
>
> On Thu, Aug 12, 2021 at 6:07 PM Dwight Giles via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > Yes rare. Classic center said they just remade some. It is for a friend
> of
> > mine. Mine was changed when I bought it.
> >
> > Dwight Giles Jr.
> > Wickford RI
> >
> > On Thu, Aug 12, 2021, 5:56 PM dan penoff.com via Mercedes <
> > mercedes@okiebenz.com> wrote:
> >
> > > I did some digging and only came up with the OE part. You can find it
> at
> > a
> > > number of the RevParts sellers for under $250.00, but I don’t see any
> > > alternatives.
> > >
> > > Sorry.
> > >
> > > If it’s any consolation they’re trading on eBay for upwards of $350 for
> > > the uninitiated.
> > >
> > > I would say to bite the bullet and buy an OE one and move on. I’m
> > > surprised they’re still available considering the relatively small
> > > application base.
> > >
> > > -D
> > >
> > > > On Aug 12, 2021, at 5:31 PM, Dwight Giles via Mercedes <
> > > mercedes@okiebenz.com> wrote:
> > > >
> > > > I am looking for a door stop/check strap for a 123 coupe.  They are
> > > > different from sedan and wagon. MB Classic has one for 250.00. (ouch)
> > > > Yesterday I found a URO one for much cheaper but I can't find it
> today.
> > > > Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
> > > > Does Anybody have a good used one or know of a source? I have tried
> all
> > > the
> > > > major sources.
> > > > TIA
> > > > Dwight
> > > >
> > > > Dwight E. Giles Jr.
> > > > 1982 300CD
> > > > 2005 E320 4matic
> > > > Wickford RI
> > > > ___
> > > > http://www.okiebenz.com
> > > >
> > > > To search list archives http://www.okiebenz.com/archive/
> > > >
> > > > To Unsubscribe or change delivery options go to:
> > > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > > >
> > >
> > > ___
> > > http://www.okiebenz.com
> > >
> > > To search list archives http://www.okiebenz.com/archive/
> > >
> > > To Unsubscribe or change delivery options go to:
> > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >
> > >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> > --
> Jaime Kopchinski
> http://www.jaimekop.com/
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread Jaime Kopchinski via Mercedes
Perfect example of MB stepping up and building new parts that were
previously NLA.

And they say MB doesn’t care….

On Thu, Aug 12, 2021 at 6:07 PM Dwight Giles via Mercedes <
mercedes@okiebenz.com> wrote:

> Yes rare. Classic center said they just remade some. It is for a friend of
> mine. Mine was changed when I bought it.
>
> Dwight Giles Jr.
> Wickford RI
>
> On Thu, Aug 12, 2021, 5:56 PM dan penoff.com via Mercedes <
> mercedes@okiebenz.com> wrote:
>
> > I did some digging and only came up with the OE part. You can find it at
> a
> > number of the RevParts sellers for under $250.00, but I don’t see any
> > alternatives.
> >
> > Sorry.
> >
> > If it’s any consolation they’re trading on eBay for upwards of $350 for
> > the uninitiated.
> >
> > I would say to bite the bullet and buy an OE one and move on. I’m
> > surprised they’re still available considering the relatively small
> > application base.
> >
> > -D
> >
> > > On Aug 12, 2021, at 5:31 PM, Dwight Giles via Mercedes <
> > mercedes@okiebenz.com> wrote:
> > >
> > > I am looking for a door stop/check strap for a 123 coupe.  They are
> > > different from sedan and wagon. MB Classic has one for 250.00. (ouch)
> > > Yesterday I found a URO one for much cheaper but I can't find it today.
> > > Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
> > > Does Anybody have a good used one or know of a source? I have tried all
> > the
> > > major sources.
> > > TIA
> > > Dwight
> > >
> > > Dwight E. Giles Jr.
> > > 1982 300CD
> > > 2005 E320 4matic
> > > Wickford RI
> > > ___
> > > http://www.okiebenz.com
> > >
> > > To search list archives http://www.okiebenz.com/archive/
> > >
> > > To Unsubscribe or change delivery options go to:
> > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > >
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
> --
Jaime Kopchinski
http://www.jaimekop.com/
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread Dwight Giles via Mercedes
Yes rare. Classic center said they just remade some. It is for a friend of
mine. Mine was changed when I bought it.

Dwight Giles Jr.
Wickford RI

On Thu, Aug 12, 2021, 5:56 PM dan penoff.com via Mercedes <
mercedes@okiebenz.com> wrote:

> I did some digging and only came up with the OE part. You can find it at a
> number of the RevParts sellers for under $250.00, but I don’t see any
> alternatives.
>
> Sorry.
>
> If it’s any consolation they’re trading on eBay for upwards of $350 for
> the uninitiated.
>
> I would say to bite the bullet and buy an OE one and move on. I’m
> surprised they’re still available considering the relatively small
> application base.
>
> -D
>
> > On Aug 12, 2021, at 5:31 PM, Dwight Giles via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > I am looking for a door stop/check strap for a 123 coupe.  They are
> > different from sedan and wagon. MB Classic has one for 250.00. (ouch)
> > Yesterday I found a URO one for much cheaper but I can't find it today.
> > Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
> > Does Anybody have a good used one or know of a source? I have tried all
> the
> > major sources.
> > TIA
> > Dwight
> >
> > Dwight E. Giles Jr.
> > 1982 300CD
> > 2005 E320 4matic
> > Wickford RI
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 123 part search

2021-08-12 Thread dan penoff.com via Mercedes
I did some digging and only came up with the OE part. You can find it at a 
number of the RevParts sellers for under $250.00, but I don’t see any 
alternatives.

Sorry.

If it’s any consolation they’re trading on eBay for upwards of $350 for the 
uninitiated.

I would say to bite the bullet and buy an OE one and move on. I’m surprised 
they’re still available considering the relatively small application base.

-D

> On Aug 12, 2021, at 5:31 PM, Dwight Giles via Mercedes 
>  wrote:
> 
> I am looking for a door stop/check strap for a 123 coupe.  They are
> different from sedan and wagon. MB Classic has one for 250.00. (ouch)
> Yesterday I found a URO one for much cheaper but I can't find it today.
> Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
> Does Anybody have a good used one or know of a source? I have tried all the
> major sources.
> TIA
> Dwight
> 
> Dwight E. Giles Jr.
> 1982 300CD
> 2005 E320 4matic
> Wickford RI
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] 123 part search

2021-08-12 Thread Dwight Giles via Mercedes
I am looking for a door stop/check strap for a 123 coupe.  They are
different from sedan and wagon. MB Classic has one for 250.00. (ouch)
Yesterday I found a URO one for much cheaper but I can't find it today.
Parts # is 123 720 03 16. Strap length is 114mm while sedan is 100mm.
Does Anybody have a good used one or know of a source? I have tried all the
major sources.
TIA
Dwight

Dwight E. Giles Jr.
1982 300CD
2005 E320 4matic
Wickford RI
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com