Re: [MBZ] Floors are done

[WILTON via Mercedes]

And, on a hot, humid day during cooling season (summer), check for 
condensation on underside of structure, and I don't mean just "under the 
house," I mean ON THE STRUCTURE, ITSELF - floor joists and flooring.


Wilton

- Original Message - 
From: "Curt Raymond via Mercedes" <mercedes@okiebenz.com>

To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Cc: "Curt Raymond" <curtlud...@yahoo.com>
Sent: Wednesday, March 01, 2017 1:03 PM
Subject: Re: [MBZ] Floors are done



Figure out where the leak is coming from?
If not we'll be having this same conversation again in a couple years...
I'm still thinking its water pushing into the house from the landscaping. 
Dirt should slope away from the house noticeably.

-Curt

 From: Kaleb C. Striplin via Mercedes <mercedes@okiebenz.com>
To: mercedes@okiebenz.com
Cc: Kaleb C. Striplin <ka...@striplin.net>
Sent: Wednesday, March 1, 2017 12:57 PM
Subject: [MBZ] Floors are done

Floor joists replaced, all ceramic tile removed and pergo installed. Was 
at the house till 11pm last night finishing it up. Pergo is not hard to 
install just requires some thinking when have to meet up and different 
angles etc, especially since this is my first time doing it and with only 
basic wood working tools such as tape measure and table saw and my HF 
vibrating tool which I think we have have gotten it close to worn out. It 
is oozing all sorts of great out of the tip which I would not think it 
should do. Renters got the keys this morning and I finally got that 
nightmare over with.


Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com




___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com




___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Curley McLain via Mercedes]

90


MG via Mercedes 
March 1, 2017 at 8:34 PM
If it's leaking then take it back and have them give you a new one. It 
isn't supposed to leak and you have had it for less then 30 days or is 
it 90 that the warranty lasts.


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[MG via Mercedes]

If it's leaking then take it back and have them give you a new 
one. It isn't supposed to leak and you have had it for less then 
30 days or is it 90 that the warranty lasts.


Kaleb C. Striplin via Mercedes wrote:

I got the HF $39 one for $24 with coupon, no big deal if you kill it.

Sent from my iPhone


On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes  
wrote:


On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
Floor joists replaced, all ceramic tile removed and pergo installed. Was at the 
house till 11pm last night finishing it up. Pergo is not hard to install just 
requires some thinking when have to meet up and different angles etc, 
especially since this is my first time doing it and with only basic wood 
working tools such as tape measure and table saw and my HF vibrating tool which 
I think we have have gotten it close to worn out. It is oozing all sorts of 
great out of the tip which I would not think it should do. Renters got the keys 
this morning and I finally got that nightmare over with.



Good for you!

I think that if one is buying one of those oscillating tools, it is wise to buy 
a bigger, better one (look for the amperage rating). I have the small Dremel 
version and it has not oozed grease, but it is pretty easy to get it really 
warm. I am afraid I am going to kill it so I have been looking at better ones 
and watching for a good deal.

RB


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com




___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com




___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Kaleb C. Striplin via Mercedes]

I probably should. This one was worked beyond what it was designed for I'm sure.

Sent from my iPhone

> On Mar 1, 2017, at 1:55 PM, Curley McLain via Mercedes 
>  wrote:
> 
> Take it back to HF.  get a new one or a refund.
> 
>> Floyd Thursby via Mercedes 
>> March 1, 2017 at 12:14 PM
>> So you can give the vibrating tool back to your
>> 
>> Ooops sorry, won't go there...
>> 
>> --FT
>> 
>> 
>> 
>> 
>> Kaleb C. Striplin via Mercedes 
>> March 1, 2017 at 11:57 AM
>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>> the house till 11pm last night finishing it up. Pergo is not hard to install 
>> just requires some thinking when have to meet up and different angles etc, 
>> especially since this is my first time doing it and with only basic wood 
>> working tools such as tape measure and table saw and my HF vibrating tool 
>> which I think we have have gotten it close to worn out. It is oozing all 
>> sorts of great out of the tip which I would not think it should do. Renters 
>> got the keys this morning and I finally got that nightmare over with.
>> 
>> Sent from my iPhone
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Randy Bennell via Mercedes]

Some things are better than others. Not HF specifically, but I have been 
unhappy with air tools in several cases and replaced them with brand 
name products. I have a big framing nailer that never worked the way I 
thought it should and replaced it with a Paslode which is night and day 
better. Similarly with a hardwood flooring nailer. I had a clone that 
just caused me trouble. I swapped it for a Bostich and no more issues. 
The new one never misses a beat. It cost a lot more than the clone but 
was worth it as it is a pain when nails do not set right and one has to 
either pull them out or drive them further in with a punch. I just 
replaced a 16 ga finishing nailer with a DeWalt unit too and am happy 
with it as well. On the other hand, I have a couple of the little 18 ga 
finish nailers that are no name and they work fine.


I have no issue with sockets and wrenches from the far east. Their 
quality has improved greatly in the past 10 years or so and the ones 
that I have acquired are fine. The finish on them is now much better 
than it once was.


I don't think I have any no name electric tools but I know folks that do 
and some of them have been very good too. Some have not.


RB

On 01/03/2017 1:28 PM, Kaleb C. Striplin via Mercedes wrote:

I have never had a problem with most things I have bought at HF. Hand tools are 
fine, never had a power tool problem. I have never bought one of their 
compressors or generators though.

Sent from my iPhone


On Mar 1, 2017, at 1:16 PM, Curt Raymond via Mercedes  
wrote:

I've never regretted buying HF wrenches but I'm not so sure about my 
compressor...
-Curt





___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Andrew Strasfogel via Mercedes]

What's a Fein?  How did she now?  Same GF?

On Wed, Mar 1, 2017 at 3:02 PM, Dimitri via Mercedes 
wrote:

> My GF got me a deluxe Fein for Xmas! The real deal made in deutscheland!
>
> Sent from my iPhone
>
> > On Mar 1, 2017, at 1:24 PM, Kaleb C. Striplin via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > I got the HF $39 one for $24 with coupon, no big deal if you kill it.
> >
> > Sent from my iPhone
> >
> >>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes <
> mercedes@okiebenz.com> wrote:
> >>>
> >>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
> >>> Floor joists replaced, all ceramic tile removed and pergo installed.
> Was at the house till 11pm last night finishing it up. Pergo is not hard to
> install just requires some thinking when have to meet up and different
> angles etc, especially since this is my first time doing it and with only
> basic wood working tools such as tape measure and table saw and my HF
> vibrating tool which I think we have have gotten it close to worn out. It
> is oozing all sorts of great out of the tip which I would not think it
> should do. Renters got the keys this morning and I finally got that
> nightmare over with.
> >> Good for you!
> >>
> >> I think that if one is buying one of those oscillating tools, it is
> wise to buy a bigger, better one (look for the amperage rating). I have the
> small Dremel version and it has not oozed grease, but it is pretty easy to
> get it really warm. I am afraid I am going to kill it so I have been
> looking at better ones and watching for a good deal.
> >>
> >> RB
> >>
> >>
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Dimitri via Mercedes]

My GF got me a deluxe Fein for Xmas! The real deal made in deutscheland!

Sent from my iPhone

> On Mar 1, 2017, at 1:24 PM, Kaleb C. Striplin via Mercedes 
>  wrote:
> 
> I got the HF $39 one for $24 with coupon, no big deal if you kill it.
> 
> Sent from my iPhone
> 
>>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>>>  wrote:
>>> 
>>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>>> the house till 11pm last night finishing it up. Pergo is not hard to 
>>> install just requires some thinking when have to meet up and different 
>>> angles etc, especially since this is my first time doing it and with only 
>>> basic wood working tools such as tape measure and table saw and my HF 
>>> vibrating tool which I think we have have gotten it close to worn out. It 
>>> is oozing all sorts of great out of the tip which I would not think it 
>>> should do. Renters got the keys this morning and I finally got that 
>>> nightmare over with.
>> Good for you!
>> 
>> I think that if one is buying one of those oscillating tools, it is wise to 
>> buy a bigger, better one (look for the amperage rating). I have the small 
>> Dremel version and it has not oozed grease, but it is pretty easy to get it 
>> really warm. I am afraid I am going to kill it so I have been looking at 
>> better ones and watching for a good deal.
>> 
>> RB
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Scott Ritchey via Mercedes]

Atta Boy!

> -Original Message-
> From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of
> Kaleb C. Striplin via Mercedes
> Sent: Wednesday, March 01, 2017 12:58 PM
> To: mercedes@okiebenz.com
> Cc: Kaleb C. Striplin <ka...@striplin.net>
> Subject: [MBZ] Floors are done
> 
> Floor joists replaced, all ceramic tile removed and pergo installed. Was
at the
> house till 11pm last night finishing it up. Pergo is not hard to install
just
> requires some thinking when have to meet up and different angles etc,
> especially since this is my first time doing it and with only basic wood
working
> tools such as tape measure and table saw and my HF vibrating tool which I
> think we have have gotten it close to worn out. It is oozing all sorts of
great out
> of the tip which I would not think it should do. Renters got the keys this
> morning and I finally got that nightmare over with.
> 
> Sent from my iPhone
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Curley McLain via Mercedes]

Take it back to HF.  get a new one or a refund.


Floyd Thursby via Mercedes 
March 1, 2017 at 12:14 PM
So you can give the vibrating tool back to your

Ooops sorry, won't go there...

--FT




Kaleb C. Striplin via Mercedes 
March 1, 2017 at 11:57 AM
Floor joists replaced, all ceramic tile removed and pergo installed. 
Was at the house till 11pm last night finishing it up. Pergo is not 
hard to install just requires some thinking when have to meet up and 
different angles etc, especially since this is my first time doing it 
and with only basic wood working tools such as tape measure and table 
saw and my HF vibrating tool which I think we have have gotten it 
close to worn out. It is oozing all sorts of great out of the tip 
which I would not think it should do. Renters got the keys this 
morning and I finally got that nightmare over with.


Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Curley McLain via Mercedes]

Waytago!


Kaleb C. Striplin via Mercedes 
March 1, 2017 at 11:57 AM
Floor joists replaced, all ceramic tile removed and pergo installed. 
Was at the house till 11pm last night finishing it up. Pergo is not 
hard to install just requires some thinking when have to meet up and 
different angles etc, especially since this is my first time doing it 
and with only basic wood working tools such as tape measure and table 
saw and my HF vibrating tool which I think we have have gotten it 
close to worn out. It is oozing all sorts of great out of the tip 
which I would not think it should do. Renters got the keys this 
morning and I finally got that nightmare over with.




___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Curt Raymond via Mercedes]

I've had 2, one I murdered by forgetting to add oil. The other I may have 
murdered by using cheap oil. It doesn't like to start if its even slightly cold 
now. Might take the cover off and clean it and see if that helps.
They're cheap though and a good entry to air tools if you don't use them a lot. 
I love having a compressor and a long air hose. Oh, the HF retractable air 
hoses are nice too.
-Curt

  From: Kaleb C. Striplin via Mercedes <mercedes@okiebenz.com>
 To: Mercedes Discussion List <mercedes@okiebenz.com> 
Cc: Kaleb C. Striplin <ka...@striplin.net>
 Sent: Wednesday, March 1, 2017 2:28 PM
 Subject: Re: [MBZ] Floors are done
   
I have never had a problem with most things I have bought at HF. Hand tools are 
fine, never had a power tool problem. I have never bought one of their 
compressors or generators though.

Sent from my iPhone

> On Mar 1, 2017, at 1:16 PM, Curt Raymond via Mercedes <mercedes@okiebenz.com> 
> wrote:
> 
> I've never regretted buying HF wrenches but I'm not so sure about my 
> compressor...
> -Curt
> 
>      From: tyee165 via Mercedes <mercedes@okiebenz.com>
> To: Mercedes Discussion List <mercedes@okiebenz.com> 
> Cc: tyee165 <tyee...@gmail.com>
> Sent: Wednesday, March 1, 2017 2:14 PM
> Subject: Re: [MBZ] Floors are done
> 
> But then you are getting close to the price of a decent tool.One thing  I 
> have learned in life is that I never regret buying quality tools.I usually 
> regret buying cheap tools.
> 
> 
> Sent from my Galaxy Tab® A
>  Original message From: "Kaleb C. Striplin via Mercedes" 
> <mercedes@okiebenz.com> Date: 2017-03-01  1:03 PM  (GMT-06:00) To: Mercedes 
> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
> Then buy 2-3 on the coupon. 
> 
> Sent from my iPhone
> 
>> On Mar 1, 2017, at 12:57 PM, tyee165 via Mercedes <mercedes@okiebenz.com> 
>> wrote:
>> 
>> Unless you are in the middle of a job where you need it . . . 
>> 
>> 
>> Sent from my Galaxy Tab® A
>>  Original message From: "Kaleb C. Striplin via Mercedes" 
>> <mercedes@okiebenz.com> Date: 2017-03-01  12:24 PM  (GMT-06:00) To: Mercedes 
>> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
>> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
>> I got the HF $39 one for $24 with coupon, no big deal if you kill it.
>> 
>> Sent from my iPhone
>> 
>>>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>>>> <mercedes@okiebenz.com> wrote:
>>>> 
>>>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>>>> Floor joists replaced, all ceramic tile removed and pergo installed. Was 
>>>> at the house till 11pm last night finishing it up. Pergo is not hard to 
>>>> install just requires some thinking when have to meet up and different 
>>>> angles etc, especially since this is my first time doing it and with only 
>>>> basic wood working tools such as tape measure and table saw and my HF 
>>>> vibrating tool which I think we have have gotten it close to worn out. It 
>>>> is oozing all sorts of great out of the tip which I would not think it 
>>>> should do. Renters got the keys this morning and I finally got that 
>>>> nightmare over with.
>>>> 
>>>> 
>>> Good for you!
>>> 
>>> I think that if one is buying one of those oscillating tools, it is wise to 
>>> buy a bigger, better one (look for the amperage rating). I have the small 
>>> Dremel version and it has not oozed grease, but it is pretty easy to get it 
>>> really warm. I am afraid I am going to kill it so I have been looking at 
>>> better ones and watching for a good deal.
>>> 
>>> RB
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> ___
>>

Re: [MBZ] Floors are done

[Kaleb C. Striplin via Mercedes]

I have never had a problem with most things I have bought at HF. Hand tools are 
fine, never had a power tool problem. I have never bought one of their 
compressors or generators though.

Sent from my iPhone

> On Mar 1, 2017, at 1:16 PM, Curt Raymond via Mercedes <mercedes@okiebenz.com> 
> wrote:
> 
> I've never regretted buying HF wrenches but I'm not so sure about my 
> compressor...
> -Curt
> 
>  From: tyee165 via Mercedes <mercedes@okiebenz.com>
> To: Mercedes Discussion List <mercedes@okiebenz.com> 
> Cc: tyee165 <tyee...@gmail.com>
> Sent: Wednesday, March 1, 2017 2:14 PM
> Subject: Re: [MBZ] Floors are done
> 
> But then you are getting close to the price of a decent tool.One thing  I 
> have learned in life is that I never regret buying quality tools.I usually 
> regret buying cheap tools.
> 
> 
> Sent from my Galaxy Tab® A
>  Original message From: "Kaleb C. Striplin via Mercedes" 
> <mercedes@okiebenz.com> Date: 2017-03-01  1:03 PM  (GMT-06:00) To: Mercedes 
> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
> Then buy 2-3 on the coupon. 
> 
> Sent from my iPhone
> 
>> On Mar 1, 2017, at 12:57 PM, tyee165 via Mercedes <mercedes@okiebenz.com> 
>> wrote:
>> 
>> Unless you are in the middle of a job where you need it . . . 
>> 
>> 
>> Sent from my Galaxy Tab® A
>>  Original message From: "Kaleb C. Striplin via Mercedes" 
>> <mercedes@okiebenz.com> Date: 2017-03-01  12:24 PM  (GMT-06:00) To: Mercedes 
>> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
>> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
>> I got the HF $39 one for $24 with coupon, no big deal if you kill it.
>> 
>> Sent from my iPhone
>> 
>>>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>>>> <mercedes@okiebenz.com> wrote:
>>>> 
>>>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>>>> Floor joists replaced, all ceramic tile removed and pergo installed. Was 
>>>> at the house till 11pm last night finishing it up. Pergo is not hard to 
>>>> install just requires some thinking when have to meet up and different 
>>>> angles etc, especially since this is my first time doing it and with only 
>>>> basic wood working tools such as tape measure and table saw and my HF 
>>>> vibrating tool which I think we have have gotten it close to worn out. It 
>>>> is oozing all sorts of great out of the tip which I would not think it 
>>>> should do. Renters got the keys this morning and I finally got that 
>>>> nightmare over with.
>>>> 
>>>> 
>>> Good for you!
>>> 
>>> I think that if one is buying one of those oscillating tools, it is wise to 
>>> buy a bigger, better one (look for the amperage rating). I have the small 
>>> Dremel version and it has not oozed grease, but it is pretty easy to get it 
>>> really warm. I am afraid I am going to kill it so I have been looking at 
>>> better ones and watching for a good deal.
>>> 
>>> RB
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Curt Raymond via Mercedes]

I've never regretted buying HF wrenches but I'm not so sure about my 
compressor...
-Curt

  From: tyee165 via Mercedes <mercedes@okiebenz.com>
 To: Mercedes Discussion List <mercedes@okiebenz.com> 
Cc: tyee165 <tyee...@gmail.com>
 Sent: Wednesday, March 1, 2017 2:14 PM
 Subject: Re: [MBZ] Floors are done
   
But then you are getting close to the price of a decent tool.One thing  I have 
learned in life is that I never regret buying quality tools.I usually regret 
buying cheap tools.


Sent from my Galaxy Tab® A
 Original message From: "Kaleb C. Striplin via Mercedes" 
<mercedes@okiebenz.com> Date: 2017-03-01  1:03 PM  (GMT-06:00) To: Mercedes 
Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
<ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
Then buy 2-3 on the coupon. 

Sent from my iPhone

> On Mar 1, 2017, at 12:57 PM, tyee165 via Mercedes <mercedes@okiebenz.com> 
> wrote:
> 
> Unless you are in the middle of a job where you need it . . . 
> 
> 
> Sent from my Galaxy Tab® A
>  Original message From: "Kaleb C. Striplin via Mercedes" 
> <mercedes@okiebenz.com> Date: 2017-03-01  12:24 PM  (GMT-06:00) To: Mercedes 
> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
> I got the HF $39 one for $24 with coupon, no big deal if you kill it.
> 
> Sent from my iPhone
> 
>>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>>> <mercedes@okiebenz.com> wrote:
>>> 
>>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>>> the house till 11pm last night finishing it up. Pergo is not hard to 
>>> install just requires some thinking when have to meet up and different 
>>> angles etc, especially since this is my first time doing it and with only 
>>> basic wood working tools such as tape measure and table saw and my HF 
>>> vibrating tool which I think we have have gotten it close to worn out. It 
>>> is oozing all sorts of great out of the tip which I would not think it 
>>> should do. Renters got the keys this morning and I finally got that 
>>> nightmare over with.
>>> 
>>> 
>> Good for you!
>> 
>> I think that if one is buying one of those oscillating tools, it is wise to 
>> buy a bigger, better one (look for the amperage rating). I have the small 
>> Dremel version and it has not oozed grease, but it is pretty easy to get it 
>> really warm. I am afraid I am going to kill it so I have been looking at 
>> better ones and watching for a good deal.
>> 
>> RB
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



   
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[tyee165 via Mercedes]

But then you are getting close to the price of a decent tool.One thing  I have 
learned in life is that I never regret buying quality tools.I usually regret 
buying cheap tools.


Sent from my Galaxy Tab® A
 Original message From: "Kaleb C. Striplin via Mercedes" 
<mercedes@okiebenz.com> Date: 2017-03-01  1:03 PM  (GMT-06:00) To: Mercedes 
Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
<ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
Then buy 2-3 on the coupon. 

Sent from my iPhone

> On Mar 1, 2017, at 12:57 PM, tyee165 via Mercedes <mercedes@okiebenz.com> 
> wrote:
> 
> Unless you are in the middle of a job where you need it . . . 
> 
> 
> Sent from my Galaxy Tab® A
>  Original message From: "Kaleb C. Striplin via Mercedes" 
> <mercedes@okiebenz.com> Date: 2017-03-01  12:24 PM  (GMT-06:00) To: Mercedes 
> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
> I got the HF $39 one for $24 with coupon, no big deal if you kill it.
> 
> Sent from my iPhone
> 
>>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>>> <mercedes@okiebenz.com> wrote:
>>> 
>>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>>> the house till 11pm last night finishing it up. Pergo is not hard to 
>>> install just requires some thinking when have to meet up and different 
>>> angles etc, especially since this is my first time doing it and with only 
>>> basic wood working tools such as tape measure and table saw and my HF 
>>> vibrating tool which I think we have have gotten it close to worn out. It 
>>> is oozing all sorts of great out of the tip which I would not think it 
>>> should do. Renters got the keys this morning and I finally got that 
>>> nightmare over with.
>>> 
>>> 
>> Good for you!
>> 
>> I think that if one is buying one of those oscillating tools, it is wise to 
>> buy a bigger, better one (look for the amperage rating). I have the small 
>> Dremel version and it has not oozed grease, but it is pretty easy to get it 
>> really warm. I am afraid I am going to kill it so I have been looking at 
>> better ones and watching for a good deal.
>> 
>> RB
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[tyee165 via Mercedes]

If that is all you plan to do, you should get the "for sale" sign up soon


Sent from my Galaxy Tab® A
 Original message From: "Kaleb C. Striplin via Mercedes" 
<mercedes@okiebenz.com> Date: 2017-03-01  12:54 PM  (GMT-06:00) To: 
mercedes@okiebenz.com Cc: "Kaleb C. Striplin" <ka...@striplin.net> Subject: Re: 
[MBZ] Floors are done 
Well I'm going to recaulk around the window to brick joint and get some dirt in 
there to slope it away from the house and see what happens

Sent from my iPhone

> On Mar 1, 2017, at 12:32 PM, Curt Raymond <curtlud...@yahoo.com> wrote:
> 
> You know water is getting in, you have to assume its following all entries 
> unless proven otherwise.
> 
> In other words until you prove its not getting in from the ground in front of 
> the house, its getting in from the ground in front of the house, and the 
> windows and the roof and the walls...
> 
> -Curt
> 
> 
> From: Kaleb C. Striplin <ka...@striplin.net>
> To: Curt Raymond <curtlud...@yahoo.com> 
> Sent: Wednesday, March 1, 2017 1:23 PM
> Subject: Re: [MBZ] Floors are done
> 
> I have not and intended on spraying down the front of the house while I had 
> the floor opened up to see if I could figure it out but forgot. Water does 
> stand in that corner when we get enough rain but the stem wall is a good 2-3 
> feet high and surely too high for Water to reach from below. 
> 
> Sent from my iPhone
> 
>> On Mar 1, 2017, at 12:03 PM, Curt Raymond <curtlud...@yahoo.com> wrote:
>> 
>> Figure out where the leak is coming from?
>>  
>> If not we'll be having this same conversation again in a couple years...
>> 
>> I'm still thinking its water pushing into the house from the landscaping. 
>> Dirt should slope away from the house noticeably.
>> 
>> -Curt
>> 
>> 
>> From: Kaleb C. Striplin via Mercedes <mercedes@okiebenz.com>
>> To: mercedes@okiebenz.com 
>> Cc: Kaleb C. Striplin <ka...@striplin.net>
>> Sent: Wednesday, March 1, 2017 12:57 PM
>> Subject: [MBZ] Floors are done
>> 
>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>> the house till 11pm last night finishing it up. Pergo is not hard to install 
>> just requires some thinking when have to meet up and different angles etc, 
>> especially since this is my first time doing it and with only basic wood 
>> working tools such as tape measure and table saw and my HF vibrating tool 
>> which I think we have have gotten it close to worn out. It is oozing all 
>> sorts of great out of the tip which I would not think it should do. Renters 
>> got the keys this morning and I finally got that nightmare over with. 
>> 
>> Sent from my iPhone
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
>> 
> 
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Kaleb C. Striplin via Mercedes]

Then buy 2-3 on the coupon. 

Sent from my iPhone

> On Mar 1, 2017, at 12:57 PM, tyee165 via Mercedes <mercedes@okiebenz.com> 
> wrote:
> 
> Unless you are in the middle of a job where you need it . . . 
> 
> 
> Sent from my Galaxy Tab® A
>  Original message From: "Kaleb C. Striplin via Mercedes" 
> <mercedes@okiebenz.com> Date: 2017-03-01  12:24 PM  (GMT-06:00) To: Mercedes 
> Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
> <ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
> I got the HF $39 one for $24 with coupon, no big deal if you kill it.
> 
> Sent from my iPhone
> 
>>> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>>> <mercedes@okiebenz.com> wrote:
>>> 
>>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>>> the house till 11pm last night finishing it up. Pergo is not hard to 
>>> install just requires some thinking when have to meet up and different 
>>> angles etc, especially since this is my first time doing it and with only 
>>> basic wood working tools such as tape measure and table saw and my HF 
>>> vibrating tool which I think we have have gotten it close to worn out. It 
>>> is oozing all sorts of great out of the tip which I would not think it 
>>> should do. Renters got the keys this morning and I finally got that 
>>> nightmare over with.
>>> 
>>> 
>> Good for you!
>> 
>> I think that if one is buying one of those oscillating tools, it is wise to 
>> buy a bigger, better one (look for the amperage rating). I have the small 
>> Dremel version and it has not oozed grease, but it is pretty easy to get it 
>> really warm. I am afraid I am going to kill it so I have been looking at 
>> better ones and watching for a good deal.
>> 
>> RB
>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[tyee165 via Mercedes]

Unless you are in the middle of a job where you need it . . . 


Sent from my Galaxy Tab® A
 Original message From: "Kaleb C. Striplin via Mercedes" 
<mercedes@okiebenz.com> Date: 2017-03-01  12:24 PM  (GMT-06:00) To: Mercedes 
Discussion List <mercedes@okiebenz.com> Cc: "Kaleb C. Striplin" 
<ka...@striplin.net> Subject: Re: [MBZ] Floors are done 
I got the HF $39 one for $24 with coupon, no big deal if you kill it.

Sent from my iPhone

> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
> <mercedes@okiebenz.com> wrote:
> 
>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>> the house till 11pm last night finishing it up. Pergo is not hard to install 
>> just requires some thinking when have to meet up and different angles etc, 
>> especially since this is my first time doing it and with only basic wood 
>> working tools such as tape measure and table saw and my HF vibrating tool 
>> which I think we have have gotten it close to worn out. It is oozing all 
>> sorts of great out of the tip which I would not think it should do. Renters 
>> got the keys this morning and I finally got that nightmare over with.
>> 
>> 
> Good for you!
> 
> I think that if one is buying one of those oscillating tools, it is wise to 
> buy a bigger, better one (look for the amperage rating). I have the small 
> Dremel version and it has not oozed grease, but it is pretty easy to get it 
> really warm. I am afraid I am going to kill it so I have been looking at 
> better ones and watching for a good deal.
> 
> RB
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Kaleb C. Striplin via Mercedes]

Well I'm going to recaulk around the window to brick joint and get some dirt in 
there to slope it away from the house and see what happens

Sent from my iPhone

> On Mar 1, 2017, at 12:32 PM, Curt Raymond <curtlud...@yahoo.com> wrote:
> 
> You know water is getting in, you have to assume its following all entries 
> unless proven otherwise.
> 
> In other words until you prove its not getting in from the ground in front of 
> the house, its getting in from the ground in front of the house, and the 
> windows and the roof and the walls...
> 
> -Curt
> 
> 
> From: Kaleb C. Striplin <ka...@striplin.net>
> To: Curt Raymond <curtlud...@yahoo.com> 
> Sent: Wednesday, March 1, 2017 1:23 PM
> Subject: Re: [MBZ] Floors are done
> 
> I have not and intended on spraying down the front of the house while I had 
> the floor opened up to see if I could figure it out but forgot. Water does 
> stand in that corner when we get enough rain but the stem wall is a good 2-3 
> feet high and surely too high for Water to reach from below. 
> 
> Sent from my iPhone
> 
>> On Mar 1, 2017, at 12:03 PM, Curt Raymond <curtlud...@yahoo.com> wrote:
>> 
>> Figure out where the leak is coming from?
>>  
>> If not we'll be having this same conversation again in a couple years...
>> 
>> I'm still thinking its water pushing into the house from the landscaping. 
>> Dirt should slope away from the house noticeably.
>> 
>> -Curt
>> 
>> 
>> From: Kaleb C. Striplin via Mercedes <mercedes@okiebenz.com>
>> To: mercedes@okiebenz.com 
>> Cc: Kaleb C. Striplin <ka...@striplin.net>
>> Sent: Wednesday, March 1, 2017 12:57 PM
>> Subject: [MBZ] Floors are done
>> 
>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>> the house till 11pm last night finishing it up. Pergo is not hard to install 
>> just requires some thinking when have to meet up and different angles etc, 
>> especially since this is my first time doing it and with only basic wood 
>> working tools such as tape measure and table saw and my HF vibrating tool 
>> which I think we have have gotten it close to worn out. It is oozing all 
>> sorts of great out of the tip which I would not think it should do. Renters 
>> got the keys this morning and I finally got that nightmare over with. 
>> 
>> Sent from my iPhone
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
>> 
> 
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Kaleb C. Striplin via Mercedes]

I got the HF $39 one for $24 with coupon, no big deal if you kill it.

Sent from my iPhone

> On Mar 1, 2017, at 12:14 PM, Randy Bennell via Mercedes 
>  wrote:
> 
>> On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:
>> Floor joists replaced, all ceramic tile removed and pergo installed. Was at 
>> the house till 11pm last night finishing it up. Pergo is not hard to install 
>> just requires some thinking when have to meet up and different angles etc, 
>> especially since this is my first time doing it and with only basic wood 
>> working tools such as tape measure and table saw and my HF vibrating tool 
>> which I think we have have gotten it close to worn out. It is oozing all 
>> sorts of great out of the tip which I would not think it should do. Renters 
>> got the keys this morning and I finally got that nightmare over with.
>> 
>> 
> Good for you!
> 
> I think that if one is buying one of those oscillating tools, it is wise to 
> buy a bigger, better one (look for the amperage rating). I have the small 
> Dremel version and it has not oozed grease, but it is pretty easy to get it 
> really warm. I am afraid I am going to kill it so I have been looking at 
> better ones and watching for a good deal.
> 
> RB
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Randy Bennell via Mercedes]

On 01/03/2017 11:57 AM, Kaleb C. Striplin via Mercedes wrote:

Floor joists replaced, all ceramic tile removed and pergo installed. Was at the 
house till 11pm last night finishing it up. Pergo is not hard to install just 
requires some thinking when have to meet up and different angles etc, 
especially since this is my first time doing it and with only basic wood 
working tools such as tape measure and table saw and my HF vibrating tool which 
I think we have have gotten it close to worn out. It is oozing all sorts of 
great out of the tip which I would not think it should do. Renters got the keys 
this morning and I finally got that nightmare over with.



Good for you!

I think that if one is buying one of those oscillating tools, it is wise 
to buy a bigger, better one (look for the amperage rating). I have the 
small Dremel version and it has not oozed grease, but it is pretty easy 
to get it really warm. I am afraid I am going to kill it so I have been 
looking at better ones and watching for a good deal.


RB


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Floyd Thursby via Mercedes]

So you can give the vibrating tool back to your

Ooops sorry, won't go there...

--FT


On 3/1/17 12:57 PM, Kaleb C. Striplin via Mercedes wrote:

this is my first time doing it and with only basic wood working tools such as 
tape measure and table saw and my HF vibrating tool


--
--FT
Winston Churchill:
“Never give in--never, never, never, never, in nothing great or small, large or 
petty,
never give in except to convictions of honor and good sense.
Never yield to force; never yield to the apparently overwhelming might of the 
enemy.”


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] Floors are done

[Curt Raymond via Mercedes]

Figure out where the leak is coming from?
If not we'll be having this same conversation again in a couple years...
I'm still thinking its water pushing into the house from the landscaping. Dirt 
should slope away from the house noticeably.
-Curt

  From: Kaleb C. Striplin via Mercedes <mercedes@okiebenz.com>
 To: mercedes@okiebenz.com 
Cc: Kaleb C. Striplin <ka...@striplin.net>
 Sent: Wednesday, March 1, 2017 12:57 PM
 Subject: [MBZ] Floors are done
   
Floor joists replaced, all ceramic tile removed and pergo installed. Was at the 
house till 11pm last night finishing it up. Pergo is not hard to install just 
requires some thinking when have to meet up and different angles etc, 
especially since this is my first time doing it and with only basic wood 
working tools such as tape measure and table saw and my HF vibrating tool which 
I think we have have gotten it close to worn out. It is oozing all sorts of 
great out of the tip which I would not think it should do. Renters got the keys 
this morning and I finally got that nightmare over with. 

Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



   
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

[MBZ] Floors are done

[Kaleb C. Striplin via Mercedes]

Floor joists replaced, all ceramic tile removed and pergo installed. Was at the 
house till 11pm last night finishing it up. Pergo is not hard to install just 
requires some thinking when have to meet up and different angles etc, 
especially since this is my first time doing it and with only basic wood 
working tools such as tape measure and table saw and my HF vibrating tool which 
I think we have have gotten it close to worn out. It is oozing all sorts of 
great out of the tip which I would not think it should do. Renters got the keys 
this morning and I finally got that nightmare over with. 

Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com