Re: [MBZ] Heya
If you want to sell something you can post it. If you need used parts, see the link at the bottom of each message. I have plenty of those available. John W. Reames III wrote: I don't rmemeber what the policy is on classifieds, but I have a need for the U shaped tube that goes between the air cleaner and the turbo on a 617a engine (this one lives in a 1985 123.133) I believe that mine had the clamp severly overtorques prior to my ownership, as the air cleaner end has its size slightly reduced; it does not go on very well at all, and when it does, the donut (even a brand new one!) is pushed down inside the tube. How much would one of these things be worth? Thanks -j. 1985 300d Gerta 1999 E300Dt Hans 1999 E300Dt Frantz ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- Kaleb C. Striplin/Claremore, OK 92 250D Turbo, 92 300E 4Matic, (2x) 91 300D 2.5 Turbo, 90 420SEL, 89 560SEL, 89 260E, 87 300SDL, 85 380SE 5.0 Euro, 84 190D 2.2, 81 240D, 81 380SLC, 80 240D, 76 240D, 76 300D, 72 250C, 69 250 http://www.okiebenz.com
[MBZ] Heya
I don't rmemeber what the policy is on classifieds, but I have a need for the U shaped tube that goes between the air cleaner and the turbo on a 617a engine (this one lives in a 1985 123.133) I believe that mine had the clamp severly overtorques prior to my ownership, as the air cleaner end has its size slightly reduced; it does not go on very well at all, and when it does, the donut (even a brand new one!) is pushed down inside the tube. How much would one of these things be worth? Thanks -j. 1985 300d Gerta 1999 E300Dt Hans 1999 E300Dt Frantz
[MBZ] Heya new baum tools goodie:
I was digging through their catalog for grins this morning and saw something called a QP1000 Torsion Bar saver for W123 and W126.. We all know how the torsion (sway) bar will break at the thin part (from rust)... This is a replacement end that you weld onto the bar (after cutting it back 1/2 from the thin section) Sounds slick if anyone needs it (beats the heck out of removing the bar, that looks like MAJOR pain--aren't we talking about vacuum booster, fuse box, heater hoses and pump/monovalve (126), fenders, other electronic goodness (abs stuff in a sdl?) Anyhow, if anyone needs it. Looked kinda cute. -j.
