date:20160921

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Thomas Thorne

I did render all the guides. The only problem I can remember facing is that one 
of the suggested formats did not work for me.  I think I did a PDF in letter 
size instead of A4 or something.  

make latexpdf -t a4twoside

I think it was the a4twoside which did not work. That is suggested in the 
README file though.  

Thomas A. F. Thorne  Software Engineer  Net2Edge

-Original Message-
From: angol...@gmail.com [mailto:angol...@gmail.com] On Behalf Of Daiane 
Angolini
Sent: 21 September 2016 17:40
To: Thomas Thorne 
Cc: Otavio Salvador ; 
meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [ 
wrote:
> I can generate pull requests on GitHub for future document patches if that 
> will make things easier. I will also try and follow up with the Exchange 
> administrators about correcting our strange configuration.
>

Yes, please ask your administrator, if it's going to take too long, send the 
pull request with the changes.

Have you rendered the User Guide? Have you faced any problem during this 
process?

> Thomas A. F. Thorne  Software Engineer  Net2Edge
>
> -Original Message-
> From: angol...@gmail.com [mailto:angol...@gmail.com] On Behalf Of 
> Daiane Angolini
> Sent: 21 September 2016 16:47
> To: Thomas Thorne 
> Cc: Otavio Salvador ; 
> meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [ Krogoth
>
> On Wed, Sep 21, 2016 at 9:26 AM, Thomas A. F. Thorne MEng AUS MIET 
>  wrote:
>> The three patches are attached:
>>
>> 0001-Add-Freescale-LS1021A-Tower-System-to-machine-list.i.patch

This patch adds only LS1021A-Tower to the table. Can you, please try to update 
that table using the same content we have in Release Notes?

/code/yocto/master/sources/Documentation$ find -name *machine-list.inc 
./user-guide/source/machine-list.inc
./release-notes/source/machine-list.inc

I think only copying over the file would be enough.

>>
>> 0001-Include-rootfs.tar.gz-Method-In-Build-and-boot-steps.patch

I link this patch! Thanks for documenting this.

I would only add a note saying the sdcard may not be partitioned, and which 
would be the expected partition table to your procedure (would it be 2 
partitions, one for rootfs and one for kernel?)

Another point, you don't copy any bootloader, would it be a problem?

>>
>> 0001-Update-to-Krogoth.patch
>

The only change needed on this patch would be the commit log saying
2.0 -> 2.1 and in fact the patch change a lot of older versions to 2.1. So I 
would only way in commit log the patch "upgrades the versions to 2.1"

Daiane
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Daiane Angolini

On Wed, Sep 21, 2016 at 1:06 PM, Thomas Thorne
 wrote:
> I can generate pull requests on GitHub for future document patches if that 
> will make things easier. I will also try and follow up with the Exchange 
> administrators about correcting our strange configuration.
>

Yes, please ask your administrator, if it's going to take too long,
send the pull request with the changes.

Have you rendered the User Guide? Have you faced any problem during
this process?

> Thomas A. F. Thorne  Software Engineer  Net2Edge
>
> -Original Message-
> From: angol...@gmail.com [mailto:angol...@gmail.com] On Behalf Of Daiane 
> Angolini
> Sent: 21 September 2016 16:47
> To: Thomas Thorne 
> Cc: Otavio Salvador ; 
> meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [
> On Wed, Sep 21, 2016 at 9:26 AM, Thomas A. F. Thorne MEng AUS MIET 
>  wrote:
>> The three patches are attached:
>>
>> 0001-Add-Freescale-LS1021A-Tower-System-to-machine-list.i.patch

This patch adds only LS1021A-Tower to the table. Can you, please try
to update that table using the same content we have in Release Notes?

/code/yocto/master/sources/Documentation$ find -name *machine-list.inc
./user-guide/source/machine-list.inc
./release-notes/source/machine-list.inc

I think only copying over the file would be enough.

>>
>> 0001-Include-rootfs.tar.gz-Method-In-Build-and-boot-steps.patch

I link this patch! Thanks for documenting this.

I would only add a note saying the sdcard may not be partitioned, and
which would be the expected partition table to your procedure (would
it be 2 partitions, one for rootfs and one for kernel?)

Another point, you don't copy any bootloader, would it be a problem?

>>
>> 0001-Update-to-Krogoth.patch
>

The only change needed on this patch would be the commit log saying
2.0 -> 2.1 and in fact the patch change a lot of older versions to
2.1. So I would only way in commit log the patch "upgrades the
versions to 2.1"

Daiane
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Thomas Thorne

I can generate pull requests on GitHub for future document patches if that will 
make things easier. I will also try and follow up with the Exchange 
administrators about correcting our strange configuration.  

Thomas A. F. Thorne  Software Engineer  Net2Edge

-Original Message-
From: angol...@gmail.com [mailto:angol...@gmail.com] On Behalf Of Daiane 
Angolini
Sent: 21 September 2016 16:47
To: Thomas Thorne 
Cc: Otavio Salvador ; 
meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] [ wrote:
> The three patches are attached:
>
> 0001-Add-Freescale-LS1021A-Tower-System-to-machine-list.i.patch
>
> 0001-Include-rootfs.tar.gz-Method-In-Build-and-boot-steps.patch
>
> 0001-Update-to-Krogoth.patch

Let me review your patches and provide feedback.

An alternative way to send patches would be using pull request on github.


Daiane
>
> Thomas Thorne  Software Engineer  Net2Edge Limited
>
> On 21/09/16 13:03, Otavio Salvador wrote:
>> On Wed, Sep 21, 2016 at 8:51 AM, Thomas Thorne 
>>  wrote:
>>> I have attempted to test if it is my client failing to send or my mail 
>>> server refusing to deliver outside.  To do so I hand edited one of my patch 
>>> files into a new email and used the same git command to send the message.  
>>> I received a copy of the email almost instantly in Outlook, which is 
>>> running on another machine.  I am confident that a message made it at least 
>>> as far as the Exchange server for my office.
>> ...
>>
>> It seems your e-mail is not right. Please send the patches attached 
>> so we can review them but would be great if you could talk to your 
>> admin people so your email settings could be fixed.
>>
>>
>>
>
>
> --
> ___
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Daiane Angolini

On Wed, Sep 21, 2016 at 9:26 AM, Thomas A. F. Thorne MEng AUS MIET
 wrote:
> The three patches are attached:
>
> 0001-Add-Freescale-LS1021A-Tower-System-to-machine-list.i.patch
>
> 0001-Include-rootfs.tar.gz-Method-In-Build-and-boot-steps.patch
>
> 0001-Update-to-Krogoth.patch

Let me review your patches and provide feedback.

An alternative way to send patches would be using pull request on github.


Daiane
>
> Thomas Thorne  Software Engineer  Net2Edge Limited
>
> On 21/09/16 13:03, Otavio Salvador wrote:
>> On Wed, Sep 21, 2016 at 8:51 AM, Thomas Thorne
>>  wrote:
>>> I have attempted to test if it is my client failing to send or my mail 
>>> server refusing to deliver outside.  To do so I hand edited one of my patch 
>>> files into a new email and used the same git command to send the message.  
>>> I received a copy of the email almost instantly in Outlook, which is 
>>> running on another machine.  I am confident that a message made it at least 
>>> as far as the Exchange server for my office.
>> ...
>>
>> It seems your e-mail is not right. Please send the patches attached so
>> we can review them but would be great if you could talk to your admin
>> people so your email settings could be fixed.
>>
>>
>>
>
>
> --
> ___
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Thomas A. F. Thorne MEng AUS MIET

The three patches are attached:

0001-Add-Freescale-LS1021A-Tower-System-to-machine-list.i.patch

0001-Include-rootfs.tar.gz-Method-In-Build-and-boot-steps.patch

0001-Update-to-Krogoth.patch

Thomas Thorne  Software Engineer  Net2Edge Limited

On 21/09/16 13:03, Otavio Salvador wrote:
> On Wed, Sep 21, 2016 at 8:51 AM, Thomas Thorne
>  wrote:
>> I have attempted to test if it is my client failing to send or my mail 
>> server refusing to deliver outside.  To do so I hand edited one of my patch 
>> files into a new email and used the same git command to send the message.  I 
>> received a copy of the email almost instantly in Outlook, which is running 
>> on another machine.  I am confident that a message made it at least as far 
>> as the Exchange server for my office.
> ...
>
> It seems your e-mail is not right. Please send the patches attached so
> we can review them but would be great if you could talk to your admin
> people so your email settings could be fixed.
>
>
>

From 34491be8b5358c636b5cdc225bba8b53f4894cdb Mon Sep 17 00:00:00 2001
From: Thomas Thorne 
Date: Wed, 31 Aug 2016 15:48:57 +0100
Subject: [Documentation][PATCH] Add Freescale LS1021A Tower System to
 machine-list.inc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The Freescale QorIQÂ® LS1021A TowerÂ® System Module is a supported
platform listed as a supported machine when sourcing the ./setup-
environment file.

According to the details in the meta-fsl-
arm/conf/machine/ls1021atwr.conf this is a ls102xa SoC item is supplied
by the meta-fsl-arm layer.

Signed-off-by: Thomas Thorne 
---
 user-guide/source/machine-list.inc | 1 +
 1 file changed, 1 insertion(+)

diff --git a/user-guide/source/machine-list.inc b/user-guide/source/machine-list.inc
index 885e4e8..36349e1 100644
--- a/user-guide/source/machine-list.inc
+++ b/user-guide/source/machine-list.inc
@@ -28,6 +28,7 @@ imx6qsabresd   Freescale i.MX6Q SABRE Smart Device i
 imx6slevk  Freescale i.MX6SL Evaluation Kiti.MX6SL meta-fsl-arm
 imx6solosabreauto  Freescale i.MX6Solo SABRE Automotivei.MX6S  meta-fsl-arm
 imx6solosabresdFreescale i.MX6Solo SABRE Smart Device  i.MX6S  meta-fsl-arm
+ls1021atwr Freescale QorIQÂ® LS1021A TowerÂ® System Module   ls102xa meta-fsl-arm
 twr-vf65gs10   Freescale Vybrid TWR-VF65GS10   vf60meta-fsl-arm
 imx233-olinuxino-maxi  OLIMEX iMX233-OLinuXino-Maxii.MX23  meta-fsl-arm-extra
 imx233-olinuxino-micro OLIMEX iMX233-OLinuXino-Micro   i.MX23  meta-fsl-arm-extra
-- 
2.7.4

From d8929f519f69412af110807e863c0c5b64216006 Mon Sep 17 00:00:00 2001
From: Thomas Thorne 
Date: Wed, 31 Aug 2016 15:22:44 +0100
Subject: [Documentation][PATCH] Include rootfs.tar.gz Method In Build and boot
 steps

Many Yocto build systems, including the one for the ls1021a-twr do not
generate .sdcard bianry images.  This changeset adds some instructions
on inflaiting a tar'ed and gzip'ed root filesystem image onto an SD card
and then copying over the kernel and device tree bianry files too.

I think this also reflects the more recent documentation from the Yocto
project.

Signed-off-by: Thomas Thorne 
---
 user-guide/source/nsteps.rst | 52 +---
 1 file changed, 39 insertions(+), 13 deletions(-)

diff --git a/user-guide/source/nsteps.rst b/user-guide/source/nsteps.rst
index a64cca7..63b2f6b 100644
--- a/user-guide/source/nsteps.rst
+++ b/user-guide/source/nsteps.rst
@@ -29,19 +29,45 @@ Build and boot in *N*-steps
 build $ bitbake-layers show-recipes "*image*" | grep ':'  # To list all possible images
 build $ bitbake 	# Bake! The first time can take several hours
 
-6. Flash your SD card::
-
-# Insert your SD Card
-# Type '$ dmesg | tail' to see the device node being used, e.g /dev/sdb
-# In case the SD to be flashed has already some partitions, the host system may have 
-# mounted these, so unmount them, e.g. '$ sudo umount /dev/sdb?'.
-build $ ls -la 'tmp/deploy/images//*.sdcard'
-
-# Flash the soft link one
-build $ sudo dd if=tmp/deploy/images//-.sdcard \
-of=/dev/sdX \
-bs=1M \
-conv=fsync
+6. Flash your SD card:
+
+a) With a pre-formed sdcard image::
+
+# Insert your SD Card
+# Type '$ dmesg | tail' to see the device node being used, e.g /dev/sdb
+# In case the SD to be flashed has already some partitions, the host system may have 
+# mounted these, so unmount them, e.g. '$ sudo umount /dev/sdb?'.
+build $ ls -la 'tmp/deploy/images//*.sdcard'
+
+# Flash the soft

[meta-freescale] Updates to meta-fsl-arm (krogoth) in 2016-09-21

2016-09-21 Thread Otavio Salvador

Hello,

I pushed following updates:

commit be5669ecf813126c86b5ec206a4ab23f4dc15eee (HEAD -> krogoth, yocto/krogoth)
Author: Tom Hochstein 
Date:   Tue Sep 13 19:53:19 2016 -0500

gstreamer1.0-plugins-imx: Fix inoperable package configuration

All packages were being built all the time because the configure
arguments from PACKAGECONFIG were not being passed. The problem
manifested itself as the QA issue build-deps, but the problem wasn't
fixed and the QA issue was silenced.

This is fixed by passing the PACKAGECONFIG arguments through EXTRA_OECONF.
Also, the build-deps QA issues are re-enabled.

Signed-off-by: Tom Hochstein 
Signed-off-by: Otavio Salvador 

commit dc8bdf2027b66036198f6e1959a98759dfb9866b
Author: Daiane Angolini 
Date:   Tue Sep 13 13:38:53 2016 -0300

firmware-imx: Install the firmware on a subfolders

The package provides firware files for 4 different modules.

This patch install each module in a different subfolder, so both can 
coexist.

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

commit 8a096d494361ff85f4981a58e9d1a1dd3fc7c1d6
Author: Marco Franchi 
Date:   Tue Sep 13 13:38:52 2016 -0300

firmware-imx: Fix the installation directory

The default Kernel defconfig points the bcm repository, but the recipes
was creating a brcm repository.

Signed-off-by: Marco Franchi 
Signed-off-by: Otavio Salvador 

commit d97c04b4bc292f41392de9c6b543831e8b9536c8
Author: Otavio Salvador 
Date:   Tue Sep 13 16:54:07 2016 -0300

kernel-module-imx-gpu-viv: Bump revision to 375bd95

This includes following changes:

375bd95 build: Copy the module build information files to topdir
6a69d95 Fix gcc 6 build error -Werror=misleading-indentation

as well as removes the corresponding patch file of the GCC 6 build
error.

Signed-off-by: Otavio Salvador 

commit 4f04b3d131a4ce92eb633312c5744b379a23a096
Author: Lauren Post 
Date:   Fri Sep 9 13:51:27 2016 -0500

imx-test: Add patch to fix build breaks wtih ldflag change

This fixes the build breaks with unit tests that includes external libraries

Signed-off-by: Lauren Post 
Signed-off-by: Otavio Salvador 

commit 3bd4b65b56e9cf090999366e3a17f2c23aa8950c
Author: Otavio Salvador 
Date:   Fri Jul 1 15:37:40 2016 -0300

imx-test: Stop using generic SoC overrides

The recipe has been changed to use the SoC specific override. It makes
the recipe easier to read and to maintain.

Change-Id: Iece4680dc88e1ee83e9f06b493074ede5c505dee
Signed-off-by: Otavio Salvador 

commit 928c7642ad5eeb2ed5f137dd208f1b91876bd484
Author: Otavio Salvador 
Date:   Fri Jul 1 15:37:26 2016 -0300

imx-lib: Stop using generic SoC overrides

The recipe has been changed to use the SoC specific override. It makes
the recipe easier to read and to maintain.

Change-Id: I6cb608efea8668e57bbde24750d1a857737271d1
Signed-off-by: Otavio Salvador 

commit a8405f7a561dc526412bca4c7e35e51acd066fda
Author: Jun Zhu 
Date:   Fri Aug 19 13:55:20 2016 +0800

imx-kobs: Add git recipe

The tools "kobs-ng" will be maintained as a open source project.
The repository location is https://github.com/NXPmicro/imx-kobs

Keep patch "fix-compile.patch" only as the other two are merged into new 
version.

Signed-off-by: Jun Zhu 
Signed-off-by: Otavio Salvador 

commit b248996165149f5dbea8fbdcd01ef435a7227b34
Author: Otavio Salvador 
Date:   Fri Aug 19 17:36:19 2016 -0300

fsl-u-boot-localversion.bbclass: Ensure git is run inside ${S}

The tasks does not run inside ${S} by default anymore so we must
ensure to run Git inside it.

Change-Id: I9bba889ed13cc386d23fa4efdac2af5b46e2d65b
Signed-off-by: Otavio Salvador 

Regards,

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Otavio Salvador

On Wed, Sep 21, 2016 at 8:51 AM, Thomas Thorne
 wrote:
> I have attempted to test if it is my client failing to send or my mail server 
> refusing to deliver outside.  To do so I hand edited one of my patch files 
> into a new email and used the same git command to send the message.  I 
> received a copy of the email almost instantly in Outlook, which is running on 
> another machine.  I am confident that a message made it at least as far as 
> the Exchange server for my office.

...

It seems your e-mail is not right. Please send the patches attached so
we can review them but would be great if you could talk to your admin
people so your email settings could be fixed.



-- 
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Thomas Thorne

How strange.  

I have attempted to test if it is my client failing to send or my mail server 
refusing to deliver outside.  To do so I hand edited one of my patch files into 
a new email and used the same git command to send the message.  I received a 
copy of the email almost instantly in Outlook, which is running on another 
machine.  I am confident that a message made it at least as far as the Exchange 
server for my office.  

The email I received was:
-Original Message-
From: Thomas Thorne [mailto:thomas.tho...@net2edge.com] 
Sent: 21 September 2016 12:34
To: meta-freescale@yoctoproject.org
Cc: Thomas Thorne ; otavio.salva...@ossystems.com.br
Subject: [Documentation][PATCH] Not Really - This is a hand made test

Try and make a message body by hand.  

Signed-off-by: Thomas Thorne 

I'll drop the diff stuff for now. 

I will attempt to send this using the following command:

$ git send-email --to meta-freescale@yoctoproject.org --cc 
thomas.tho...@net2edge.com --cc otavio.salva...@ossystems.com.br 
0001-Hand-Made-Test.patch

Maybe I cannot send emails externally through git or something weird like that. 
 CCing Otavio Salvador and myself to check whether it is the list that fails to 
get this or everthing. I kept the [Documentation][PATCH] bit of the Subject as 
that was all that was common between the patches.  Also update the Date: field 
by hand.  

-

The terminal output when I executed the command was:
$ git send-email --to meta-freescale@yoctoproject.org --cc 
thomas.tho...@net2edge.com --cc otavio.salva...@ossystems.com.br 
0001-Hand-Made-Test.patch
0001-Hand-Made-Test.patch
(mbox) Adding cc: Thomas Thorne  from line 'From: 
Thomas Thorne '
(body) Adding cc: Thomas Thorne  from line 
'Signed-off-by: Thomas Thorne '

From: Thomas Thorne 
To: meta-freescale@yoctoproject.org
Cc: thomas.tho...@net2edge.com,
otavio.salva...@ossystems.com.br
Subject: [Documentation][PATCH] Not Really - This is a hand made test
Date: Wed, 21 Sep 2016 12:34:07 +0100
Message-Id: <1474457647-16977-1-git-send-email-thomas.tho...@net2edge.com>
X-Mailer: git-send-email 2.7.4

The Cc list above has been expanded by additional
addresses found in the patch commit message. By default
send-email prompts before sending whenever this occurs.
This behavior is controlled by the sendemail.confirm
configuration setting.

For additional information, run 'git send-email --help'.
To retain the current behavior, but squelch this message,
run 'git config --global sendemail.confirm auto'.

Send this email? ([y]es|[n]o|[q]uit|[a]ll): yes
OK. Log says:
Sendmail: /usr/sbin/sendmail -i meta-freescale@yoctoproject.org 
thomas.tho...@net2edge.com otavio.salva...@ossystems.com.br
From: Thomas Thorne 
To: meta-freescale@yoctoproject.org
Cc: thomas.tho...@net2edge.com,
otavio.salva...@ossystems.com.br
Subject: [Documentation][PATCH] Not Really - This is a hand made test
Date: Wed, 21 Sep 2016 12:34:07 +0100
Message-Id: <1474457647-16977-1-git-send-email-thomas.tho...@net2edge.com>
X-Mailer: git-send-email 2.7.4

Result: OK

-

Ahh I may have found something.  When I check the syslog of my machine I can 
see a rejection message: 
...
Sep 21 11:56:04 thorne-ul-dt postfix/qmgr[5645]: 427121963DE6: 
from=, size=4069, nrcpt=2 (queue 
active)
Sep 21 11:56:04 thorne-ul-dt postfix/qmgr[5645]: D45561963DE4: 
from=, size=3214, nrcpt=2 (queue 
active)
Sep 21 11:56:04 thorne-ul-dt postfix/qmgr[5645]: 6FC201963DE1: 
from=, size=2085, nrcpt=2 (queue 
active)
Sep 21 11:56:06 thorne-ul-dt postfix/smtp[12052]: 6FC201963DE1: 
to=, 
relay=yocto-www.yoctoproject.org[140.211.169.56]:25, delay=92753, 
delays=92751/0.03/1.2/0.2, dsn=4.1.8, status=deferred (host 
yocto-www.yoctoproject.org[140.211.169.56] said: 450 4.1.8 
: Sender address rejected: 
Domain not found (in reply to RCPT TO command))
Sep 21 11:56:06 thorne-ul-dt postfix/smtp[12050]: 427121963DE6: 
to=, 
relay=yocto-www.yoctoproject.org[140.211.169.56]:25, delay=92726, 
delays=92724/0.01/1.2/0.2, dsn=4.1.8, status=deferred (host 
yocto-www.yoctoproject.org[140.211.169.56] said: 450 4.1.8 
: Sender address rejected: 
Domain not found (in reply to RCPT TO command))
Sep 21 11:56:06 thorne-ul-dt postfix/smtp[12051]: D45561963DE4: 
to=, 
relay=yocto-www.yoctoproject.org[140.211.169.56]:25, delay=92736, 
delays=92735/0.02/1.2/0.2, dsn=4.1.8, status=deferred (host 
yocto-www.yoctoproject.org[140.211.169.56]

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

2016-09-21 Thread Otavio Salvador

On Tue, Sep 20, 2016 at 6:15 AM, Thomas Thorne
 wrote:
> There seem to be no further changes to the documentation repository so I have 
> resent the old patches.  I have copies of the 3 emails in my inbox as I CCed 
> myself this time.  All three patches that I submitted this morning start 
> their subject line with "[Documentation][PATCH]"

We did not receive them. I am adding Daiane on Cc so she can also keep
an eye on this.

-- 
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2016-09-21

2016-09-21 Thread Otavio Salvador

Hello,

I pushed following updates:

commit 27428e7308ee7cd006759d0f776c5bc63818dfac (fslc/master, master)
Author: Daiane Angolini 
Date:   Tue Sep 20 16:02:12 2016 -0300

imx7s-warp: Install WiFi and Bluetooth firmware by default

This machine has the 1DX_BCM4343W chip, so install the firmware by default

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

commit 415a6b85436b8d60db59c98b54aec5d512573145
Author: Daiane Angolini 
Date:   Tue Sep 20 16:02:11 2016 -0300

imx7s-warp: Use linux-warp7 by default

Both linux-fslc-imx and linux-warp7 have support and are currently working
with WaRP7. However, there are some patches on linux-warp7 not upstreamed to
linux-fslc-imx.

So, let's use the fork linux-warp7 by default.

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

commit f323829eb95e811b29408f71b04d2fc07dcd8a00
Author: Daiane Angolini 
Date:   Tue Sep 20 16:02:10 2016 -0300

linux-warp7: Add linux kernel recipe for WaRP7 board

This kernel is a fork of linux-fslc 4.1-1.0.x-imx with the following patches
merged to it:

ARM: imx_v7_defconfig: Add himax touch driver support
ARM: IMX: imx7d_warp: Add hx852xes touch driver firmware
ARM: IMX: imx7d_warp: Add hx852xes touch driver
Input: add KEY_APP_SWITCH
ARM: IMX: imx7d_warp: Enable Himax Touch in warp dts file
ARM: dts: imx7d-warp: Remove unnecesary DSI definitions
ARM: dts: imx7d-warp: Add Bluetooth support
ARM: dts: imx7d-warp: Add Wifi support
bcmdhd: Force bcmdhd to build as kernel module.
ARM: imx_v7_defconfig: Add bcmdhd and removed unused Bluetooth configs
ARM: IMX: imx7d_warp: Add MIPI-DSI display config
ARM: IMX: imx7d_warp: Enable MIPI-DSI in warp dts file
ARM: IMX: imx7d_warp: Add otxv5432 driver

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

Regards,

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

[meta-freescale] Updates to meta-fsl-arm-extra (krogoth) in 2016-09-21

2016-09-21 Thread Otavio Salvador

Hello,

I pushed following updates:

commit e95f4ae61fdaf6452d6dfa9cb59dbdf9cdf73c99 (HEAD -> krogoth, fslc/krogoth)
Author: Daiane Angolini 
Date:   Tue Sep 20 16:02:12 2016 -0300

imx7s-warp: Install WiFi and Bluetooth firmware by default

This machine has the 1DX_BCM4343W chip, so install the firmware by default

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

commit 8caa382273b6437a81c083241face140ed3da324
Author: Daiane Angolini 
Date:   Tue Sep 20 16:02:11 2016 -0300

imx7s-warp: Use linux-warp7 by default

Both linux-fslc-imx and linux-warp7 have support and are currently working
with WaRP7. However, there are some patches on linux-warp7 not upstreamed to
linux-fslc-imx.

So, let's use the fork linux-warp7 by default.

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

commit e9c6eb07c3653936ec24cb84fc321180e5237074
Author: Daiane Angolini 
Date:   Tue Sep 20 16:02:10 2016 -0300

linux-warp7: Add linux kernel recipe for WaRP7 board

This kernel is a fork of linux-fslc 4.1-1.0.x-imx with the following patches
merged to it:

ARM: imx_v7_defconfig: Add himax touch driver support
ARM: IMX: imx7d_warp: Add hx852xes touch driver firmware
ARM: IMX: imx7d_warp: Add hx852xes touch driver
Input: add KEY_APP_SWITCH
ARM: IMX: imx7d_warp: Enable Himax Touch in warp dts file
ARM: dts: imx7d-warp: Remove unnecesary DSI definitions
ARM: dts: imx7d-warp: Add Bluetooth support
ARM: dts: imx7d-warp: Add Wifi support
bcmdhd: Force bcmdhd to build as kernel module.
ARM: imx_v7_defconfig: Add bcmdhd and removed unused Bluetooth configs
ARM: IMX: imx7d_warp: Add MIPI-DSI display config
ARM: IMX: imx7d_warp: Enable MIPI-DSI in warp dts file
ARM: IMX: imx7d_warp: Add otxv5432 driver

Signed-off-by: Daiane Angolini 
Signed-off-by: Otavio Salvador 

Regards,

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

[meta-freescale] [meta-freescale PATCH v2 2/2] qoriq-base.inc: Use 'fsl-dynamic-packagearch' class

2016-09-21 Thread Otavio Salvador

This ensures PACKAGE_ARCH has a better default.

 - use MACHINE_ARCH for every package depending on virtual/kernel

 - use MACHINE_SOCARCH for every package depending on
   cryptodev-qoriq-linux, cryptodev-qoriq-module, cryptodev-qoriq-test
   or openssl-qoriq;

Signed-off-by: Otavio Salvador 
---

Changes in v2: None

 conf/machine/include/qoriq-base.inc | 9 +
 1 file changed, 9 insertions(+)

diff --git a/conf/machine/include/qoriq-base.inc 
b/conf/machine/include/qoriq-base.inc
index 1786b00..7360a75 100644
--- a/conf/machine/include/qoriq-base.inc
+++ b/conf/machine/include/qoriq-base.inc
@@ -17,3 +17,12 @@ MACHINE_EXTRA_RRECOMMENDS += "udev-extraconf 
udev-rules-qoriq kernel-modules"
 EXTRA_IMAGEDEPENDS += "u-boot cst-native"
 
 MACHINEOVERRIDES =. "qoriq:"
+
+# Sub-architecture support
+MACHINE_SOCARCH_SUFFIX ?= ""
+MACHINE_SOCARCH_SUFFIX_qoriq = "-qoriq"
+
+MACHINE_ARCH_FILTER = "virtual/kernel"
+MACHINE_SOCARCH_FILTER_append_qoriq = " cryptodev-qoriq-linux 
cryptodev-qoriq-module cryptodev-qoriq-test openssl-qoriq"
+
+INHERIT += "fsl-dynamic-packagearch"
-- 
2.9.3

-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

[meta-freescale] [meta-freescale PATCH v2 1/2] fsl-dynamic-packagearch.bbclass: Stop using ARM-specific architectures

2016-09-21 Thread Otavio Salvador

The code to dynamically assign the architecture does take into account
the default tune so we don't need to include the other architectures
with the SoC suffix into the possible package architecture list.

This allow for the class to be used across different architectures
(such as PowerPC) thus fixing issues while integrating it for QorIQ
usage.

Signed-off-by: Otavio Salvador 
---

Changes in v2:
- New patch

 classes/fsl-dynamic-packagearch.bbclass | 17 +
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/classes/fsl-dynamic-packagearch.bbclass 
b/classes/fsl-dynamic-packagearch.bbclass
index fa542fc..95ea775 100644
--- a/classes/fsl-dynamic-packagearch.bbclass
+++ b/classes/fsl-dynamic-packagearch.bbclass
@@ -23,7 +23,7 @@
 # MACHINE_ARCH_FILTER = "virtual/kernel"
 # MACHINE_SOCARCH_FILTER_soc = "virtual/libgles1 ... virtual/libgl"
 #
-# Copyright 2013-2015 (C) O.S. Systems Software LTDA.
+# Copyright 2013-2016 (C) O.S. Systems Software LTDA.
 
 python __anonymous () {
 machine_arch_filter = set((d.getVar("MACHINE_ARCH_FILTER", True) or 
"").split())
@@ -50,16 +50,9 @@ python __anonymous () {
 d.setVar("PACKAGE_ARCH", package_arch)
 
 cur_package_archs = (d.getVar("PACKAGE_ARCHS", True) or "").split()
-arch_extra_socarch = (d.getVar("ARM_EXTRA_SOCARCH", True) or "")
-thumb_extra_socarch = (d.getVar("THUMB_EXTRA_SOCARCH", True) or "")
-if not arch_extra_socarch in cur_package_archs:
-d.appendVar("PACKAGE_EXTRA_ARCHS", " %s" % arch_extra_socarch)
-
-if not thumb_extra_socarch in cur_package_archs:
-d.appendVar("PACKAGE_EXTRA_ARCHS", " %s" % thumb_extra_socarch)
+machine_socarch = (d.getVar("MACHINE_SOCARCH", True) or "")
+if not machine_socarch in cur_package_archs:
+d.appendVar("PACKAGE_EXTRA_ARCHS", " %s" % machine_socarch)
 }
 
-ARM_EXTRA_SOCARCH = 
"${ARMPKGARCH}${ARMPKGSFX_DSP}${ARMPKGSFX_EABI}${ARMPKGSFX_ENDIAN}${ARMPKGSFX_FPU}${MACHINE_SOCARCH_SUFFIX}"
-THUMB_EXTRA_SOCARCH = 
"${ARMPKGARCH}${ARM_THUMB_SUFFIX}${ARMPKGSFX_DSP}${ARMPKGSFX_EABI}${ARMPKGSFX_ENDIAN}${ARMPKGSFX_FPU}${MACHINE_SOCARCH_SUFFIX}"
-
-MACHINE_SOCARCH = "${@bb.utils.contains('ARM_INSTRUCTION_SET', 'thumb', 
'${THUMB_EXTRA_SOCARCH}', '${ARM_EXTRA_SOCARCH}', d)}"
+MACHINE_SOCARCH = "${TUNE_PKGARCH}${MACHINE_SOCARCH_SUFFIX}"
-- 
2.9.3

-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

[meta-freescale] Updates to meta-fsl-arm (master) in 2016-09-21

2016-09-21 Thread Otavio Salvador

Hello,

I pushed following updates:

commit 32d08927dd286fe2bc4b234b980431e95537f77c (HEAD -> pending, yocto/master)
Author: Tom Hochstein 
Date:   Tue Sep 20 17:47:38 2016 -0500

weston: Rebase patches for Weston 1.11

Signed-off-by: Tom Hochstein 
Signed-off-by: Otavio Salvador 

commit a3ee6a504ed9405f892e78bbe7c62c45d5238a6a
Author: Otavio Salvador 
Date:   Fri Sep 16 14:28:42 2016 -0300

u-boot-fslc: Update to the 2016.09-based fork

This update the U-Boot fork to the 2016.09 release. The following
changes are applied on top of the original release:

a3d27ea wandboard: Fix mmcroot device name
6ed7ce7 Revert conversion for config_distro_bootcmd.h
547c5ed warp: Change default bootenv configuration
dced260 wandboard: Drop revision specific DeviceTree support
6218c13 mx6sabresd: Enable video interfaces in bootargs
3196b92 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
a405f38 iMX6: Change mmcroot to use fixed mmc block index for USDHC
ddd4e7f embestmx6boards: Change default bootenv configuration
290d197 mx6sabresd: Use LDO dtb file until LDO bypass support is added
eee8253 mx6slevk: Use LDO dtb file until LDO bypass support is added
b8944fd arm: imx: add i.MX6ULL 14x14 EVK board support
067c0b6 dm: mmc: intialize dev when probe
6c7981f arm: dts: add device tree for i.MX6ULL
5bd8722 dt-bindings: add i.mx6ul clock header
cfe216b arm: dts: imx6ull: add pinctrl defines
56e4d12 pinctrl: imx6: support i.MX6ULL
3715a11 imx: iomux: fix snvs usage for i.MX6ULL
74592f9 imx: imx6ull: adjust the ldo 1.2v bandgap voltage
1245598 imx: mx6ull: Add AIPS3 initialization
de54ed4 imx: mx6ull: Update memory map address
c607887 imx: mx6ull: update clock settings and CCM register map
f4fdd70 imx: mx6ull: adjust POR_B setting for i.MX6ULL
c67a27c imx: mx6ull: misc soc update
3349f26 imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ
1cc2fda imx: mx6ull: skip setting ahb clock
5be61be imx: timer: update gpt driver for i.MX6ULL
489f44d imx: ocotp: support i.MX6ULL
c8edd8a imx-common: introduce is_mx6ull
cddd8bf imx: mx6ull: add kconfig entry for MX6ULL
b8fea53 imx: mx6ull: add mx6ull major cpu type
6e6b252 imx: mx6ull: add iomux header file
480b1d5 configs: enable device tree for Colibri iMX7
cd81c94 colibri_imx7: use Ricoh RN5T567 to reboot the board
b900233 arm: dts: imx7: add Ricoh RN5T567 PMIC node
e1df8be power: pmic: add Ricoh RN5T567 PMIC support
2312eb0 colibri_imx7: remove legancy UART platform data
11169db colibri_imx7: remove legancy I2C support
76620e7 arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree
23665c2 arm: dts: imx7: add pinctrl defines
e104855 pinctrl: imx: do not announce driver initialization
aee3b4c dm: imx: serial: support device tree

Signed-off-by: Otavio Salvador 

Regards,

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

[meta-freescale] Updates to meta-freescale (master) in 2016-09-21

2016-09-21 Thread Otavio Salvador

Hello,

I pushed following updates:

commit 1126f6dd429d65824e4348a8dc840e2e489acb11 (m/master, m/krogoth, 
github/master)
Author: Otavio Salvador 
Date:   Wed Sep 14 10:38:15 2016 -0300

qoriq-base.inc: Remove unused SoC family support

The SoC family use has been removed in commit 8999634f (Migrate from
SOC_FAMILY to MACHINEOVERRIDES) so the support can be dropped as well.

Signed-off-by: Otavio Salvador 

commit 61eed26d8a040338f393f9ee354c912c0b5f3586
Author: Otavio Salvador 
Date:   Wed Sep 14 09:34:18 2016 -0300

openssl-qoriq: Sync with OE-Core recipe changes

This synchronizes the OpenSSL recipe with OE-Core as well as includes
the CVE-2016-2178 and CVE-2016-2177 security fixes in this fork.

Signed-off-by: Otavio Salvador 

commit 79e2309191ad06fae57f20fd3a5288de2ec745bc
Author: Otavio Salvador 
Date:   Fri Sep 16 14:28:42 2016 -0300

u-boot-fslc: Update to the 2016.09-based fork

This update the U-Boot fork to the 2016.09 release. The following
changes are applied on top of the original release:

a3d27ea wandboard: Fix mmcroot device name
6ed7ce7 Revert conversion for config_distro_bootcmd.h
547c5ed warp: Change default bootenv configuration
dced260 wandboard: Drop revision specific DeviceTree support
6218c13 mx6sabresd: Enable video interfaces in bootargs
3196b92 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
a405f38 iMX6: Change mmcroot to use fixed mmc block index for USDHC
ddd4e7f embestmx6boards: Change default bootenv configuration
290d197 mx6sabresd: Use LDO dtb file until LDO bypass support is added
eee8253 mx6slevk: Use LDO dtb file until LDO bypass support is added
b8944fd arm: imx: add i.MX6ULL 14x14 EVK board support
067c0b6 dm: mmc: intialize dev when probe
6c7981f arm: dts: add device tree for i.MX6ULL
5bd8722 dt-bindings: add i.mx6ul clock header
cfe216b arm: dts: imx6ull: add pinctrl defines
56e4d12 pinctrl: imx6: support i.MX6ULL
3715a11 imx: iomux: fix snvs usage for i.MX6ULL
74592f9 imx: imx6ull: adjust the ldo 1.2v bandgap voltage
1245598 imx: mx6ull: Add AIPS3 initialization
de54ed4 imx: mx6ull: Update memory map address
c607887 imx: mx6ull: update clock settings and CCM register map
f4fdd70 imx: mx6ull: adjust POR_B setting for i.MX6ULL
c67a27c imx: mx6ull: misc soc update
3349f26 imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ
1cc2fda imx: mx6ull: skip setting ahb clock
5be61be imx: timer: update gpt driver for i.MX6ULL
489f44d imx: ocotp: support i.MX6ULL
c8edd8a imx-common: introduce is_mx6ull
cddd8bf imx: mx6ull: add kconfig entry for MX6ULL
b8fea53 imx: mx6ull: add mx6ull major cpu type
6e6b252 imx: mx6ull: add iomux header file
480b1d5 configs: enable device tree for Colibri iMX7
cd81c94 colibri_imx7: use Ricoh RN5T567 to reboot the board
b900233 arm: dts: imx7: add Ricoh RN5T567 PMIC node
e1df8be power: pmic: add Ricoh RN5T567 PMIC support
2312eb0 colibri_imx7: remove legancy UART platform data
11169db colibri_imx7: remove legancy I2C support
76620e7 arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree
23665c2 arm: dts: imx7: add pinctrl defines
e104855 pinctrl: imx: do not announce driver initialization
aee3b4c dm: imx: serial: support device tree

Signed-off-by: Otavio Salvador 

commit 86812657e125c94d6cda549538e5fc98f69aee8c
Author: Tom Hochstein 
Date:   Tue Sep 20 17:47:38 2016 -0500

weston: Rebase patches for Weston 1.11

Signed-off-by: Tom Hochstein 
Signed-off-by: Otavio Salvador 

Regards,

--
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [meta-freescale PATCH 3/3] qoriq-base.inc: Use 'fsl-dynamic-packagearch' class

2016-09-21 Thread Otavio Salvador

On Tue, Sep 20, 2016 at 3:25 AM, Zhenhua Luo  wrote:
>> Without this, following error happens:
>>
>> ERROR: openssl-qoriq-1.0.2h-r0 do_package_write_rpm: If the above message
>> is too much, the simpler version is you're advised to wipe out tmp and 
>> rebuild
>> (reusing sstate is fine). That will likely fix things in most (but not all) 
>> cases.
>> ERROR: openssl-qoriq-1.0.2h-r0 do_package_write_rpm: Function failed:
>> sstate_task_postfunc
>> ERROR: Logfile of failure stored in:
>> .../build-wayland/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/openssl-
>> qoriq/1.0.2h-r0/temp/log.do_package_write_rpm.5308
>> recipe openssl-qoriq-1.0.2h-r0: task do_package_write_rpm: Failed
>> ERROR: Task (.../sources/meta-freescale/recipes-connectivity/openssl/openssl-
>> qoriq_1.0.2h.bb:do_package_write_rpm)
>> failed with exit code '1'
> [Zhenhua Luo] I still don't know why MACHINE_SOCARCH is needed for openssl 
> and cryptodev, what's the negative impaction without this definition? I 
> didn't meet the build error when openssl-qoriq is built for ls1021atwr, may I 
> know how the issue can be reproduced?

do:

MACHINE=imx7dsabresd bitbake openssl && MACHINE=ls1021atwr bitbake openssl

-- 
Otavio Salvador O.S. Systems
http://www.ossystems.com.brhttp://code.ossystems.com.br
Mobile: +55 (53) 9981-7854Mobile: +1 (347) 903-9750
-- 
___
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

[meta-freescale] Updates to meta-fsl-arm (krogoth) in 2016-09-21

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

Re: [meta-freescale] [<Documentation][PATCH] Update to Krogoth

[meta-freescale] Updates to meta-fsl-arm-extra (master) in 2016-09-21

[meta-freescale] Updates to meta-fsl-arm-extra (krogoth) in 2016-09-21

[meta-freescale] [meta-freescale PATCH v2 2/2] qoriq-base.inc: Use 'fsl-dynamic-packagearch' class

[meta-freescale] [meta-freescale PATCH v2 1/2] fsl-dynamic-packagearch.bbclass: Stop using ARM-specific architectures

[meta-freescale] Updates to meta-fsl-arm (master) in 2016-09-21

[meta-freescale] Updates to meta-freescale (master) in 2016-09-21

Re: [meta-freescale] [meta-freescale PATCH 3/3] qoriq-base.inc: Use 'fsl-dynamic-packagearch' class

16 matches

Site Navigation

Mail list logo

Footer information