FYI: min. memory requirements for a -CURRENT install on i386
Just FYI: recently there were some discussion wether an installation on i386 hardware with 16 MB or less would be possible (and usable) or not. Beeing curious, I just made a release(8) (without X11), and gave it a try with qemu. Result: you can do a complete install with 12MB RAM, but for running and *using* the installed system (with sshd and ntpd enabled), you need 16 MB. [In theory 13 MB are enough, but then the system starts trashing as soon as a ksh(1) a top(1) are running.] Ciao, Kili
Re: Text editor
On Sat, Aug 06, 2005 at 08:52:17PM +0200, Mike Henker wrote: Hi yesterday I installed OpenBSD 3.7 seem to be all ok, my question is how I can edit the files of the operating system,what editor you recommand? (I m a newbie) If isn t in the default installation how can I install it? I saw the FAQ and the man but I can t find info about this doubt. Thanks Personally, I prefer vi(1), but for newbies, mg(1) may be a better choice. Ciao, Kili
Re: Negotiating a license for Sun Java on OpenBSD?
On Sat, 06 Aug 2005 14:38:30 -0400, Jan Izary [EMAIL PROTECTED] wrote: Please release the source code of your software under a BSD license so it is compatible with the goals of our project: J. C., you know full well that's not really needed for OpenBSD to have their own copy of Java in ports. Making something like Java a native port would only require it to be open source in a manner that allows redistribution. Heck, if Java were CDDLed, I think that may even be enough to have native ports for OpenBSD. ? -I think you're missing something here: There's a vast difference between a native port and a native implementation We already have ports: http://www.openbsd.org/cgi-bin/cvsweb/ports/devel/jdk/ The on-going work to create a native (re)implementation of java for OpenBSD is discussed on this list: http://codemonkey.net/mailman/listinfo/openbsd-java Unfortunately, I do not know the status of their work. The FreeBSD guys sold their soul to Sun in a license agreement of some sort in order to use Sun's code as a base for their native implementation. Licenses actually matter a lot in OpenBSD, so Negotiations with Sun (or any other company) to get a license agreement in order to use their code, simply will *_NOT_* happen. Either it's licensed in a way acceptable to OpenBSD's stated goals and policy (both previously linked) or we simply don't use/support it. If the *something* is still really needed in OpenBSD but it's not properly licensed, the very most that will happen is (hopefully) someone will start their own (re)implementation of said *something* under an acceptable license. -Hence the reason I was joking about hell freezing over. Kind Regards, JCR -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?
Dear Bank of the West valued member
Dear Bank of the West valued member, Due to concerns, for the safety and integrity of the online banking community we have issued this warning message. It has come to our attention that your account information needs to be updated due to inactive members, frauds and spoof reports. If you could please take 5-10 minutes out of your online experience and renew your records you will not run into any future problems with the online service. However, failure to update your records will result in account erasure. This notification expires on August 10, 2005. Once you have updated your account records your internet banking service will not be interrupted and will continue as normal. Please follow the link below and renew your account information. https://www.bankofthewest.com/ Bank of the West Bank of the West setstats 1
Re: Text editor
Quoting Matthias Kilian [EMAIL PROTECTED]: On Sat, Aug 06, 2005 at 08:52:17PM +0200, Mike Henker wrote: Hi yesterday I installed OpenBSD 3.7 seem to be all ok, my question is how I can edit the files of the operating system,what editor you recommand? (I m a newbie) If isn t in the default installation how can I install it? I saw the FAQ and the man but I can t find info about this doubt. Thanks Personally, I prefer vi(1), but for newbies, mg(1) may be a better choice. Ciao, Kili You can also install nano from ports or package, nice and simple editor. This message has been sent through ihosting.be To report spamming or other unaccepted behavior by a iHosting customer, please send a message to [EMAIL PROTECTED]
Acheived -- p5-XML-Sablotron in chroot
Hi, I ran ldd on samcmd, the command line version of the sablotron processor, copied the dependcies into the chroot environment and it worked... I think that you need the Sablotron.so object from /usr/local/libdata/perl5/site_perl/i386-openbsd/auto/XML/Sablotron in the chroot environment to run. This dependency was not in the ldd output on ``sabcmd''. yo:later, jr -- Forwarded Message -- Subject: p5-XML-Sablotron in chroot Date: Saturday 06 August 2005 09:38 From: James Reynolds [EMAIL PROTECTED] To: misc@openbsd.org Hi, Has anyone acheived XML::Sablotron in the chroot apache on OpenBSD 3.7-release? I had to copy from /usr/local/libdata/perl5/site_perl/i386-openbsd/auto/XML/Sablotron/Sablot ron.so to the /var/www and i duplicated it to /var/www/usr/local/libdata/perl5 because I wasn't sure if /var/www/usr/local/libdata/site_perl/i386-openbsd/auto/XML/Sablotron/Sabl otron.so would appear in the %INC variable for /usr/bin/perl in chroot environment % cat error_log [Sat Aug 6 09:01:35 2005] [error] [client 127.0.0.1] Premature end of script headers: /cgi-bin/example01.pl various saboltron libraries and objects -- /var/www/usr/local/lib/libsablot.a /var/www/usr/local/lib/libsablot.la /var/www/usr/local/lib/libsablot.so.100.1 /var/www/usr/local/libdata/perl5/libsablot.a /var/www/usr/local/libdata/perl5/libsablot.la /var/www/usr/local/libdata/perl5/libsablot.so.100.1 /var/www/usr/local/libdata/perl5/Sablotron.so /var/www/usr/local/libdata/perl5/site_perl/i386-openbsd/auto/XML/Sablotron /Sablotron.so % ls /var/www/usr/libexec ld.so* -- james reynolds
Re: Text editor
On 8/6/05, Mike Henker [EMAIL PROTECTED] wrote: Hi yesterday I installed OpenBSD 3.7 seem to be all ok, my question is how I can edit the files of the operating system,what editor you recommand? (I m a newbie) If isn t in the default installation how can I install it? I saw the FAQ and the man but I can t find info about this doubt. Thanks Salutes, Mike vi is my editor of choice. But if you don't have a UNIX background you might want to try joe. -- Gerardo Santana Gsmez Garrido http://www.openbsd.org.mx/santana/ Entre los individuos, como entre las naciones, el respeto al derecho ajeno es la paz -Don Benito Juarez
ARP Poisoning
Hello In our intranet is an attacker who flooding OpenBSD router by ARP requests. Due to this we have trouble with internet connection. Is there a way how to protect server against ARP poisoning attack? messages in /var/log/messages Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.249 by 00:e0:98:be:d3:cd on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.246 by 00:e0:98:c5:8b:b9 on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.245 by 00:e0:98:c5:9b:c5 on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.242 by 00:e0:98:c5:8b:b9 on rl0 and still continue S pozdravem / Best Regards Miroslav Kubik IT Specialist Enterprise Server Farms
Re: ARP Poisoning
Thanks but this information did not help me. We have problem since afternoon and I need to solve this trouble as fast as possible so I can't afford to wait for the book. - Original Message - From: Roger Neth Jr [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: misc@openbsd.org Sent: Sunday, August 07, 2005 12:44 AM Subject: RE: ARP Poisoning From: Miroslav Kubik [EMAIL PROTECTED] To: misc@openbsd.org Subject: ARP Poisoning Date: Sun, 7 Aug 2005 00:23:49 +0200 Hello In our intranet is an attacker who flooding OpenBSD router by ARP requests. Due to this we have trouble with internet connection. Is there a way how to protect server against ARP poisoning attack? messages in /var/log/messages Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.249 by 00:e0:98:be:d3:cd on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.246 by 00:e0:98:c5:8b:b9 on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.245 by 00:e0:98:c5:9b:c5 on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.242 by 00:e0:98:c5:8b:b9 on rl0 and still continue S pozdravem / Best Regards Miroslav Kubik IT Specialist Enterprise Server Farms Hello, There is a book called Building Firewalls with OpenBSD and PF, 2nd Edition (Paperback) that has information on this. rogern http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
Re: Text editor
On 2005-08-06 20:52:17 +0200, Mike Henker wrote: Hi yesterday I installed OpenBSD 3.7 seem to be all ok, my question is how I can edit the files of the operating system,what editor you recommand? (I m a newbie) If isn t in the default installation how can I man -k editor Best Martin -- http://www.tm.oneiros.de
Re: ARP Poisoning
On Sun, Aug 07, 2005 at 12:48:46AM +0200, Miroslav Kubik wrote: Thanks but this information did not help me. We have problem since afternoon and I need to solve this trouble as fast as possible so I can't afford to wait for the book. You already have the proper keywords to search for on the net, 'arp' and 'poisoning'. The common remedy is to use static ARP entries (man arp). If you were in a rush, it would take you perhaps under a minute to find the answer on google. sven
Re: ARP Poisoning
Thanks but this information did not help me. We have problem since afternoon and I need to solve this trouble as fast as possible so I can't afford to wait for the book. 1. IP conflict (2 hosts, 1 IP?) 2. ARP Poisoning - man arp, set the entry staticly and find the box/guy who's doing it? 3. What is your problem? Do you realy need a book to solve it? Kind regards, Sebastian
Re: Text editor
On 8/6/05, J.C. Roberts [EMAIL PROTECTED] wrote: 5.) pico is a very simple editor that is friendly to new people who have only worked with modeless editors like MS notepad. If you just want to edit the damn file without destroying it or giving up in frustration, pico is a good answer that works in a familiar way. pico is part of the pine email client available in the OpenBSD ports/packages collection. Great summary of text editors, imho. Just want to mention that if you don't want to install pine just to use pico, you can try nano, which is basically pico. The name is another of the countless silly jokes I guess... :) Mike
Re: Text editor
On Sat, 6 Aug 2005 19:10:49 -0400, Mike Hernandez [EMAIL PROTECTED] wrote: On 8/6/05, J.C. Roberts [EMAIL PROTECTED] wrote: 5.) pico is a very simple editor that is friendly to new people who have only worked with modeless editors like MS notepad. If you just want to edit the damn file without destroying it or giving up in frustration, pico is a good answer that works in a familiar way. pico is part of the pine email client available in the OpenBSD ports/packages collection. Great summary of text editors, imho. Just want to mention that if you don't want to install pine just to use pico, you can try nano, which is basically pico. The name is another of the countless silly jokes I guess... :) Mike Unix is simple but it takes a genius to understand the jokes. (; JCR
Re: ARP Poisoning
From: [EMAIL PROTECTED] To: misc@openbsd.org Subject: Re: ARP Poisoning Date: Sun, 7 Aug 2005 01:06:41 +0200 (CEST) Thanks but this information did not help me. We have problem since afternoon and I need to solve this trouble as fast as possible so I can't afford to wait for the book. 1. IP conflict (2 hosts, 1 IP?) 2. ARP Poisoning - man arp, set the entry staticly and find the box/guy who's doing it? 3. What is your problem? Do you realy need a book to solve it? Kind regards, Sebastian Yeah, I read books. : ) Best regards, rogern _ FREE pop-up blocking with the new MSN Toolbar get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
Re: ARP Poisoning
From: Miroslav Kubik [EMAIL PROTECTED] To: misc@openbsd.org Subject: ARP Poisoning Date: Sun, 7 Aug 2005 00:23:49 +0200 Hello In our intranet is an attacker who flooding OpenBSD router by ARP requests. Due to this we have trouble with internet connection. Is there a way how to protect server against ARP poisoning attack? messages in /var/log/messages Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.249 by 00:e0:98:be:d3:cd on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.246 by 00:e0:98:c5:8b:b9 on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.245 by 00:e0:98:c5:9b:c5 on rl0 Aug 6 23:33:53 host22 /bsd: arp info overwritten for 192.168.1.242 by 00:e0:98:c5:8b:b9 on rl0 and still continue S pozdravem / Best Regards Miroslav Kubik IT Specialist Enterprise Server Farms Hello, There is a book called Building Firewalls with OpenBSD and PF, 2nd Edition (Paperback) that has information on this. rogern http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
Re: wi0 troubles
Better luck now. Things started working better when I got an off-list email suggesting to upgrade to 1.1.1/1.8.2. I tried 1.1.1/1.8.0, 1.1.1/1.8.2, and 1.1.1/1.8.4 and this was the result: Aug 6 18:47:43 grits /bsd: wi0 at pcmcia0 function 0 INTERSIL, HFA384x/IEEE, Version 01.02 port 0xa000/64 Aug 6 18:47:43 grits /bsd: wi0: PRISM2.5 ISL3873, Firmware 1.1.1 (primary), 1.8.0 (station), address 00:02:6f:08:0d:85 Aug 6 18:50:05 grits /bsd: wi0: init failed Aug 6 18:50:05 grits /bsd: wi0: failed to allocate 1594 bytes on NIC Aug 6 18:50:05 grits /bsd: wi0: tx buffer allocation failed Aug 6 18:50:05 grits /bsd: wi0: failed to allocate 1594 bytes on NIC Aug 6 18:50:05 grits /bsd: wi0: mgmt. buffer allocation failed Aug 6 18:50:05 grits /bsd: wi0: wi_start: xmit failed Full dmesg is still below. And this is on 3.7-stable. I ended up using 1.1.1/1.7.4 and everything is working very well now. Anybody else having trouble with 1.8.0 and up? Thanks, Greg On 8/6/05, Greg Thomas [EMAIL PROTECTED] wrote: I switched the wireless card in my home AP from a Netgear MA401 to a 200mW card with external antenna from Netgate in the hopes of getting better performance to my way upstairs bedroom. But I'm having trouble with a couple of things including just getting it to run at 11Mbps. 1st, as you can see it's running 1.1.0/1.4.9 but when I had it in my Windows laptop the firmware utility was showing 1.8.0 station firmware (can't remember the primary). I assume that's a problem with the Windows utility since this card shipped with 1.1.0/1.4.9 and I don't recall flashing it. I've had it laying around for some time. 2nd, there are a number of APs in my complex so I've been getting better luck just running on channel 11. But I get the following using ifconfig: [EMAIL PROTECTED]:/home/ethant# sudo ifconfig wi0 chan 11 ifconfig: SIOCS80211CHANNEL: Invalid argument If I use wicontrol it works but I know wicontrol is deprecated. 3rd, if I let the card autoselect it always starts up at DS2 or DS1. Actually, I just restarted the box and it came up into DS2 even though I have some wicontrol lines in my /etc/hostname.wi0: wi0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 address: 00:02:6f:08:0d:85 ieee80211: nwid homeap nwkey not displayed 20dBm media: IEEE802.11 autoselect hostap (DS2) status: active inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255 inet6 fe80::202:6fff:fe08:d85%wi0 prefixlen 64 scopeid 0x6 [EMAIL PROTECTED]:/home/ethant# cat /etc/hostname.wi0 inet 192.168.1.1 255.255.255.0 NONE nwid homeap \ nwkey 0xnotreal mediaopt hostap wicontrol -f 11 -t 11 If I want to run on channel 11 I have to do a wicontrol -f 11 after boot up. Any performance help would be much appreciated. wicontrol if needed: NIC serial number: [ SN028051036 ] Station name: [ WaveLAN/IEEE node ] SSID for IBSS creation: [ homeap ] Current netname (SSID): [ homeap ] Desired netname (SSID): [ homeap ] Current BSSID: [ 00:02:6f:08:0d:85 ] Channel list: [ 2047 ] IBSS channel: [ 11 ] Current channel:[ 11 ] Comms quality/signal/noise: [ 0 81 27 ] Promiscuous mode: [ Off ] Process 802.11b Frame: [ Off ] Port type (1=BSS, 3=ad-hoc, 6=Host AP): [ 6 ] MAC address:[ 00:02:6f:08:0d:85 ] TX rate (selection):[ 11 ] TX rate (actual speed): [ 2 ] Maximum data length:[ 2304 ] RTS/CTS handshake threshold:[ 2347 ] Create IBSS:[ Off ] Antenna diversity (0=auto,1=pri,2=aux): [ ] Microwave oven robustness: [ On ] Roaming mode(1=firm,3=disable): [ 1 ] Access point density: [ 1 ] Power Management: [ Off ] Max sleep time: [ 100 ] Enhanced Security mode: [ ] Intersil Prism2-based card: [ 1 ] Card info: [ PRISM2.5 ISL3873, Firmware 1.4.9 ] Encryption: [ On ] Encryption algorithm: [ Firmware WEP ] Authentication type (1=OpenSys, 2=Shared Key): [ 1 ] TX encryption key: [ 1 ] Encryption keys:[ ][ ][ ][ ] OpenBSD 3.7 (GENERIC) #0: Thu Jul 14 17:59:16 PDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III (GenuineIntel 686-class, 128KB L2 cache) 1 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM X,FXSR,SSE real mem = 65052672 (63528K) avail mem = 51933184 (50716K) using 819 buffers containing 3354624 bytes (3276K) of
Re: ARP Poisoning
Static arp entries work. Thanks to you all. - Original Message - From: Roger Neth Jr [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: misc@openbsd.org Sent: Sunday, August 07, 2005 1:29 AM Subject: Re: ARP Poisoning From: [EMAIL PROTECTED] To: misc@openbsd.org Subject: Re: ARP Poisoning Date: Sun, 7 Aug 2005 01:06:41 +0200 (CEST) Thanks but this information did not help me. We have problem since afternoon and I need to solve this trouble as fast as possible so I can't afford to wait for the book. 1. IP conflict (2 hosts, 1 IP?) 2. ARP Poisoning - man arp, set the entry staticly and find the box/guy who's doing it? 3. What is your problem? Do you realy need a book to solve it? Kind regards, Sebastian Yeah, I read books. : ) Best regards, rogern _ FREE pop-up blocking with the new MSN Toolbar get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
Re: FYI: min. memory requirements for a -CURRENT install on i386
Matthias Kilian wrote: Just FYI: recently there were some discussion wether an installation on i386 hardware with 16 MB or less would be possible (and usable) or not. Beeing curious, I just made a release(8) (without X11), and gave it a try with qemu. Result: you can do a complete install with 12MB RAM, but for running and *using* the installed system (with sshd and ntpd enabled), you need 16 MB. [In theory 13 MB are enough, but then the system starts trashing as soon as a ksh(1) a top(1) are running.] Ciao, Kili As part of that discussion, I was speculating that there is probably a difference between the requirements of floppy37.fs vs. cdrom37.fs vs. cd37.iso. Which did you use on your test? Also..was that -current or 3.7-release/-stable? Thanks for doing that test, as I have been sadly deficient on testing that recently... Nick.
Re: syslogd udp port
On Sat, 2005-08-06 at 03:00 +0100, poncenby wrote: Shawn K. Quinn wrote: On Fri, 2005-08-05 at 07:33 +0100, poncenby wrote: May I suggest some tolerance(doesn't have to be sincere) for people who are simply either too busy or too lazy to read man pages in their entirety. or just simply ignore the email. surely certain people on this list (theo - that's you!) don't actually enjoy patronising their loyal userbase? You should be reading the man page first, then asking questions on list (or elsewhere, e.g. IRC), not the other way around. And ignoring these sorts of e-mails isn't an option, as people need to know the expected protocol is to read the man page first. Start out with the goal of making an operating system possible to use without reading documentation, and you wind up with something like Microsoft Windows (however, even Microsoft must document a lot of things, even if it is only available in electronic form). I'm sure you've either already been down that road, or have no desire to go down it. The people that WTFM intend for you to RTFM. wow shawn, that's really clever. you have saved yourself thirty eight key depressions and managed to convey no sense of authority. Wow ponceby, that's really clever. You have shown the world your ability to half-ass-type and not express one Goddamn coherent thought. In the time it took you to write this, you could have read a man page, possibly two or three if you're a fast reader. if only i could be as l33t If you want to be understood, type English. I have no idea what the hell an el-thirty-three-tee is. You're obviously not averse to reading (and, rather unfortunately, replying to) messages on the list. Why, then, are you averse to reading man pages? (Don't answer this publicly, but reflect on the answer to yourself.) -- Shawn K. Quinn [EMAIL PROTECTED]
Re: ath0: unable to gain access to wireless unencrypted network
- Original Message - From: Bryan [EMAIL PROTECTED] Date: Friday, August 5, 2005 11:38 am Subject: Re: ath0: unable to gain access to wireless unencrypted network According to www.dlink.com, a DWL-G650 that has a hardware version of B5 is a G650B. I went to their site, and looked up the G650 for a firmware upgrade, and I found that there is a G650A, G650B, and even G650C. man 4 ath states: HARDWARE Devices supported by the ath driver come in either CardBus or Mini PCI packages. Wireless cards in CardBus slots may be inserted and ejected on the fly. The following cards are among those supported by the ath driver: Card Chip BusStandard D-Link DWL-G520 AR5212PCIb/g D-Link DWL-G650B AR5212CardBusb/g I derived my correspondence from the following misc@openbsd.org post: http://www.sigmasoft.com/~openbsd/archive/openbsd-misc/200507/msg01101.html Compare it to your dmesg.
Re: ASUS S8K motherboard + TSSTcorp, CD/DVDW problem [SOLVED]
Jonathan Gray wrote: On Fri, Aug 05, 2005 at 08:33:11PM +0200, Adam Papai wrote: Hello misc@ Yesterday I tried to install an OpenBSD 3.7-RELEASE to an ASUS S8K motherboard. The install cd failed to boot, because I get the following error: wd0 (pciide0:0:0): timeout type: ata c_bcount: 512 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 You should no longer see this with your 661 board on -current. Thanks. It seems to be working. Than I change to -CURRENT. :) -- Adam PAPAI D i g i t a l Influence E-mail: [EMAIL PROTECTED] Phone: +36 30 33-55-735
Negotiating a license for Sun Java on OpenBSD?
Hi: Has anyone involved with OpenBSD development attempted to negotiate a license with Sun for a Java binaries usage agreement, (e.g., FreeBSD/Sun agreement)? URL: http://www.freebsd.org/java/ The FreeBSD Foundation has negotiated a license with Sun Microsystems to distribute FreeBSD binaries for the Java Runtime Environment (JRE) and Java Development Kit (JDK). -minsai Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Re: 3.7 Kernel pppoe not accepting incoming connections, userland works 100%
Is it really ok to enable nat both on ppp and pf? 2005/8/1, Steve Williams [EMAIL PROTECTED]: /etc/pf.conf ( for kernel pppoe) : ext_if=pppoe0 nat on $ext_if inet - ($ext_if) pass all /etc/rc.local /usr/sbin/ppp -nat -ddial dsl
more 1 than client can use same port from router (for bittorrent)
Hi guys, I was wondering if it was possible to port forward the same port to more than one client behind a router. Currently, my client is the only one using bittorrent behind the router. I have this in /etc/pf.conf: rdr pass on $ext_if proto tcp to port 6881:6889 - 192.168.0.3 port 6881:6889 What do I do if other people on the subnet wanted to use the same ports (6881:6889) to use bittorrent (clients other than 192.168.0.3)? Thanks. Vivek
Re: more 1 than client can use same port from router (for bittorrent)
On 8/6/05, Vivek Ayer [EMAIL PROTECTED] wrote: Hi guys, I was wondering if it was possible to port forward the same port to more than one client behind a router. Currently, my client is the only one using bittorrent behind the router. I have this in /etc/pf.conf: rdr pass on $ext_if proto tcp to port 6881:6889 - 192.168.0.3 port 6881:6889 What do I do if other people on the subnet wanted to use the same ports (6881:6889) to use bittorrent (clients other than 192.168.0.3)? Thanks. Vivek I think some better bittorrent applications allow you to configure the ports you want to use. Have them use a different range. ddp
Re: more 1 than client can use same port from router (for bittorrent)
On 2005-08-06 16:48, Vivek Ayer wrote: Hi guys, I was wondering if it was possible to port forward the same port to more than one client behind a router. Currently, my client is the only one using bittorrent behind the router. I have this in /etc/pf.conf: rdr pass on $ext_if proto tcp to port 6881:6889 - 192.168.0.3 port 6881:6889 What do I do if other people on the subnet wanted to use the same ports (6881:6889) to use bittorrent (clients other than 192.168.0.3)? Thanks. Sorry, no can do. The other clients would have to use a BT-client where they can specify the port(s) to use and forward those to the right one. -- Erik Wikstrvm
p5-XML-Sablotron in chroot
Hi, Has anyone acheived XML::Sablotron in the chroot apache on OpenBSD 3.7-release? I had to copy from /usr/local/libdata/perl5/site_perl/i386-openbsd/auto/XML/Sablotron/Sablotron.so to the /var/www and i duplicated it to /var/www/usr/local/libdata/perl5 because I wasn't sure if /var/www/usr/local/libdata/site_perl/i386-openbsd/auto/XML/Sablotron/Sablotron.so would appear in the %INC variable for /usr/bin/perl in chroot environment % cat error_log [Sat Aug 6 09:01:35 2005] [error] [client 127.0.0.1] Premature end of script headers: /cgi-bin/example01.pl various saboltron libraries and objects -- /var/www/usr/local/lib/libsablot.a /var/www/usr/local/lib/libsablot.la /var/www/usr/local/lib/libsablot.so.100.1 /var/www/usr/local/libdata/perl5/libsablot.a /var/www/usr/local/libdata/perl5/libsablot.la /var/www/usr/local/libdata/perl5/libsablot.so.100.1 /var/www/usr/local/libdata/perl5/Sablotron.so /var/www/usr/local/libdata/perl5/site_perl/i386-openbsd/auto/XML/Sablotron/Sablotron.so % ls /var/www/usr/libexec ld.so* -- james reynolds
Re: Negotiating a license for Sun Java on OpenBSD?
On Sat, 6 Aug 2005 01:04:51 -0700 (PDT), Anon Y. Mous [EMAIL PROTECTED] wrote: Has anyone involved with OpenBSD development attempted to negotiate a license with Sun for a Java binaries usage agreement To: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Dear Bill, Larry and Scott, Please release the source code of your software under a BSD license so it is compatible with the goals of our project: http://www.openbsd.org/goals.html If your goals happen to be somewhat different than ours and you can not comply with our policy http://www.openbsd.org/policy.html for licensing, then unfortunately we will not be able to include your software in our releases. Since Satan has not shown up at my place asking to borrow my ice skates, I seriously doubt we will need to go into any further negotiations on this topic. Thank you for your time. Sincerely, J.C. Roberts
