Re: HP OfficeJet 5610 Scanner
On February 17, 2019 4:16:54 PM CST, Joe M wrote: >> I have this exact model. Were you able to get printing to work? > >I do not use it for printing anymore. So, never tried printing with it. Ok. thanks -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
Re: HP OfficeJet 5610 Scanner
On February 14, 2019 1:21:43 PM CST, Joe M wrote: >It works fine after installing hplip. > >For the next person trying this, these commands got it working: > >doas pkg_add sane-backends hplip dbus >doas rcctl enable messagebus >doas rcctl start messagebus > >scanimage should work fine now. > >Thanks I have this exact model. Were you able to get printing to work? -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
Re: vultr
On January 5, 2019 4:22:23 PM CST, ed...@pettijohn-web.com wrote: >I was thinking about spinning up a new instance on vultr to play with. >They have an option to install OBSD 6.3/4. Has anyone tried these? I >attempted the FBSD one in the past, but the default install was all >whacked out and I had to start over with a fresh install. > >Thanks, > >Edgar Normally a lurker here. With that out of the way, I have a 6.3 running. I can't remember though if I installed it myself or used their default install. One problem I had was with ntp continually drifting by hours and days. After searching for a solution for a very long time I reached out to their support. They made a change and with my permission they restarted the instance and it has been trouble free for months. It's a very simple static site made with Hugo at davidscooley.com.
Re: Signatures for distribution sets and packages?
On Wed, Sep 05, 2012 at 12:48:58PM +0800, Rowdy OpenBSD wrote: Is there any way to verify that distribution sets and packages that I have downloaded have not been tampered with (e.g., by someone with access to the mirror from which I downloaded them)? The package system supports signatures, but the packages distributed on OpenBSD mirrors are unsigned, as is the SHA256 file in each directory. Did you RTFA? I've read the FAQ. It says that the package system supports signatures, but, as I wrote above, the packages distributed on OpenBSD mirrors are unsigned. It doesn't say anything about signatures for the distribution sets. Is there some other article that I should read that answers my questions? Perhaps he means to read afterboot? Not sure. Regards, Donald Cooley
Re: whiteboard over the net
On 3/29/10, Marco Peereboom sl...@peereboom.us wrote: I have been looking for some sort of whiteboard like software that runs over the net. Anyone know a name of a port? Coccinella is a Jabber chat client with whiteboard communication. The whiteboard let you share your mp3s, photos, and lots of other stuff. Further it accepts any fonts. So you will also be able to share mathematical formulas with your contacts. http://openports.se/net/coccinella Regards, Donald Cooley
kde4 dead?
openports shows that the openbsd version of kde4 is nearly two years old. are there any future plans to update kde4? Regards, Donald Cooley
error building jdk 1.5/1.6 on current as of 13 Feb
at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub5 at uhub1 port 2 ALCOR Generic USB Hub rev 1.10/3.12 addr 2 ulpt0 at uhub5 port 1 configuration 1 interface 1 HP Officejet 5600 series rev 2.00/1.00 addr 3 ulpt0: using bi-directional mode uhidev0 at uhub5 port 4 configuration 1 interface 0 Logitech USB-PS/2 Optical Mouse rev 2.00/11.10 addr 4 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b Regards, Donald Cooley
Re: error building jdk 1.5/1.6 on current as of 13 Feb
On Sat, Feb 13, 2010 at 10:44 AM, Marc Espie es...@nerim.net wrote:
On Sat, Feb 13, 2010 at 11:02:28AM -0500, Ted Unangst wrote:
On Sat, Feb 13, 2010 at 6:07 AM, Louis V. Lambrecht lvl...@skynet.be wrote:
/bin/sh is *NOT* /usr/local/bin/bash
Very true, but I'm not sure how that is at all relevant.
bash-4.0$ make
/bin/sh: no closing quote
*** Error code 1
Stop in /usr/ports/devel/jdk/1.5 (line 1793 of
/usr/ports/infrastructure/mk/bsd.port.mk).
First thing to do would be to look at line 1793 of that file.
... or at least tell us which version of it you're using, since line numbers
like that don't mean too much.
$OpenBSD: bsd.port.mk,v 1.975 2010/02/12 12:00:19 espie Exp $
1793@${ECHO_MSG} === ${FULLPKGNAME${SUBPACKAGE}}${_MASTER} $i.
1794 .endfor
1795 . endif
I also tried the other suggestions - changed from bash to sh, ran make
clean CLEANDEPENDS=Yes. I nuked /usr/ports and then ran cvs to
download the ports tree from a different mirror today. I'm still
getting the same error. Maybe irrelevant, but i just built
windows-codecs from ports without any hiccups.
Re: error building jdk 1.5/1.6 on current as of 13 Feb
On Sat, Feb 13, 2010 at 3:08 PM, Marc Espie es...@nerim.net wrote: you have to ACCEPT_JRL_LICENSE to be able to build it. e.g., set ACCEPT_JRL_LICENSE=Yes in your /etc/mk.conf the fact that this breaks instead of displaying a message is indeed a bug, I'll fix it... Thanks, that worked
cannot update packages after upgrade on 4.6 current as of january 12
after upgrading current i tried to update all packages but update fails: sudo pkg_add -ui -F update -F updatedepends Password: fam-2.7.0p9-libgamin-0.1.10 forward dependencies: | Dependency of thunar-1.0.1p1 on fam-* doesn't match Merging thunar-1.0.1p1-thunar-1.0.1p4 (131 to go) Detected loop, merging sets (131 to go) | libxfce4util-4.6.1-libxfce4util-4.6.1 | exo-0.3.103-exo-0.3.103p0 | fam-2.7.0p9+thunar-1.0.1p1-libgamin-0.1.10+thunar-1.0.1p4 | glib2-2.22.2p2-glib2-2.22.3p1 Detected loop, merging sets (128 to go) | gtk+2-2.18.3-gtk+2-2.18.5 | libnotify-0.4.5p0-libnotify-0.4.5p0 | exo-0.3.103+fam-2.7.0p9+glib2-2.22.2p2+libxfce4util-4.6.1+thunar-1.0.1p1-exo -0.3.103p0+glib2-2.22.3p1+libgamin-0.1.10+libxfce4util-4.6.1+thunar-1.0.1p4 Detected loop, merging sets (125 to go) | librsvg-2.26.0-librsvg-2.26.0 | gnome-icon-theme-2.28.0p0-gnome-icon-theme-2.28.0p1 | exo-0.3.103+fam-2.7.0p9+glib2-2.22.2p2+gtk+2-2.18.3+libnotify-0.4.5p0+libxfce 4util-4.6.1+thunar-1.0.1p1-exo-0.3.103p0+glib2-2.22.3p1+gtk+2-2.18.5+libgami n-0.1.10+libnotify-0.4.5p0+libxfce4util-4.6.1+thunar-1.0.1p4 Detected loop, merging sets (122 to go) | exo-0.3.103+fam-2.7.0p9+glib2-2.22.2p2+gnome-icon-theme-2.28.0p0+gtk+2-2.18.3 +libnotify-0.4.5p0+librsvg-2.26.0+libxfce4util-4.6.1+thunar-1.0.1p1-exo-0.3. 103p0+glib2-2.22.3p1+gnome-icon-theme-2.28.0p1+gtk+2-2.18.5+libgamin-0.1.10+l ibnotify-0.4.5p0+librsvg-2.26.0+libxfce4util-4.6.1+thunar-1.0.1p4 | libcroco-0.6.2-libcroco-0.6.2 Detected loop, merging sets (121 to go) | exo-0.3.103+fam-2.7.0p9+glib2-2.22.2p2+gnome-icon-theme-2.28.0p0+gtk+2-2.18.3 +libcroco-0.6.2+libnotify-0.4.5p0+librsvg-2.26.0+libxfce4util-4.6.1+thunar-1. 0.1p1-exo-0.3.103p0+glib2-2.22.3p1+gnome-icon-theme-2.28.0p1+gtk+2-2.18.5+li bcroco-0.6.2+libgamin-0.1.10+libnotify-0.4.5p0+librsvg-2.26.0+libxfce4util-4. 6.1+thunar-1.0.1p4 | pango-1.24.5p0-pango-1.24.5p0 Can't locate OpenBSD/OldLibs.pm in @INC (@INC contains: /usr/libdata/perl5/i386-openbsd/5.10.1 /usr/local/libdata/perl5/i386-openbsd/5.10.1 /usr/libdata/perl5 /usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd /usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl .) at /usr/sbin/pkg_add line 602. dmesg: emu0 Creative Labs PCI Gameport Joystick rev 0x01 at pci0 dev 10 function 1 not configured re0 at pci0 dev 11 function 0 Realtek 8169 rev 0x10: RTL8169/8110SB (0x1000), irq 10, address 00:e0:4c:16:b3:af rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 SiS OHCI root hub rev 1.00/1.00 addr 1 biomask eb65 netmask ef65 ttymask fff7 mtrr: K6-family MTRR support (2 registers) vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b syncing disks... done rebooting... OpenBSD 4.6-current (GENERIC) #496: Mon Jan 11 23:26:04 MST 2010 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD-K6(tm) 3D processor (AuthenticAMD 586-class) 501 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX real mem = 393768960 (375MB) avail mem = 372903936 (355MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/22/99, BIOS32 rev. 0 @ 0xfd8a0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 2.1 @ 0xfd8a0/0x760 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries) pcibios0: PCI Interrupt Router at 000:01:0 (SiS 85C503 System rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc/0x8000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 SiS 530 PCI rev 0x02 sisagp0 at pchb0 agp0 at sisagp0: aperture at 0xf800, size 0x400 pciide0 at pci0 dev 0 function 1 SiS 5513 EIDE rev 0xd0: 530: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: WDC WD1600AAJB-00J3A0 wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: LITE-ON, CD-RW SOHR-5239V, 2$0A ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 pcib0 at pci0 dev 1 function 0 SiS 85C503 System rev 0xb1 SiS 5595 System rev 0x00 at pci0 dev 1 function 1 not configured ohci0 at pci0 dev 1 function 2 SiS 5597/5598 USB rev 0x11: irq 11, version 1.0, legacy support ppb0 at
Re: cannot update packages after upgrade on 4.6 current as of january 12
On Sun, Jan 24, 2010 at 3:57 AM, Landry Breuil landry.bre...@gmail.com wrote: Can't locate OpenBSD/OldLibs.pm in @INC (@INC contains: /usr/libdata/perl5/i386-openbsd/5.10.1 /usr/local/libdata/perl5/i386-openbsd/5.10.1 /usr/libdata/perl5 /usr/local/libdata/perl5 /usr/local/libdata/perl5/site_perl/i386-openbsd /usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl .) at /usr/sbin/pkg_add line 602. Package quirks too recent for userland. cd /usr/src/usr.sbin/pkg_add cvs up make make install will fixit. Landry after installing pkg_add from source, some packages will update but not all. sudo pkg_add -ui -F update -F updatedepends Can't install avahi-0.6.25p5 because of libraries |library pcre.2.3 not found Direct dependencies for avahi-0.6.25p5-avahi-0.6.25p5 resolve to: libdaemon-0.13 glib2-2.22.3p1 libiconv-1.13 dbus-1.2.16 gettext-0.17p0 gdbm-1.8.3p0 Full dependency tree is libdaemon-0.13 glib2-2.22.3p1 libiconv-1.13 dbus-1.2.16 gettext-0.17p0 gdbm-1.8.3p0 Can't install enchant-1.5.0 because of libraries Direct dependencies for enchant-1.5.0-enchant-1.5.0 resolve to: aspell-0.60.6p4 glib2-2.22.3p1 libiconv-1.13 gettext-0.17p0 dbus-glib-0.80p1v0 Full dependency tree is aspell-0.60.6p4 glib2-2.22.3p1 libiconv-1.13 gettext-0.17p0 dbus-glib-0.80p1v0 Warning: couldn't read packing-list from installed package glib2-2.22.2p2 File /var/db/pkg/glib2-2.22.2p2/+CONTENTS does not exist Can't install firefox35-3.5.6p0 because of libraries |library atk-1.0.2800.0 not found |library cairo.9.2 not found |library glitz.2.0 not found |library jpeg.63.0 not found |library pango-1.0.1801.0 not found |library pangocairo-1.0.1801.0 not found |library pangoft2-1.0.1801.0 not found |library png.9.0 not found Direct dependencies for firefox35-3.5.5-firefox35-3.5.6p0 resolve to: gtk+2-2.18.5 sqlite3-3.6.16.1 libiconv-1.13 gettext-0.17p0 desktop-file-utils-0.15p1 Full dependency tree is glib2-2.22.2p2 gtk+2-2.18.5 sqlite3-3.6.16.1 glib2-2.22.3p1 libiconv-1.13 pcre-7.9 gettext-0.17p0 desktop-file-utils-0.15p1 Can't install gconf2-2.28.0p0 because of libraries |library dbus-1.7.1 not found | in /usr/local/lib: libdbus-1.so.7.1 (dbus-1.2.16 not reachable) Direct dependencies for gconf2-2.28.0p0-gconf2-2.28.0p0 resolve to: libxml-2.7.6 gtk+2-2.18.5 libiconv-1.13 gettext-0.17p0 dbus-glib-0.80p1v0 ORBit2-2.14.17p0 Full dependency tree is libxml-2.7.6 libIDL-0.8.13 libiconv-1.13 dbus-glib-0.80p1v0 glib2-2.22.2p2 gtk+2-2.18.5 glib2-2.22.3p1 gettext-0.17p0 pcre-7.9 ORBit2-2.14.17p0 Can't install xulrunner-1.8.1.19p4 because of libraries |library gio-2.0.1802.0 not found | in /usr/local/lib: libgio-2.0.so.1802.0 (glib2-2.22.3p1 not reachable) |library glib-2.0.1802.0 not found | in /usr/local/lib: libglib-2.0.so.1802.0 (glib2-2.22.3p1 not reachable) |library gmodule-2.0.1802.0 not found | in /usr/local/lib: libgmodule-2.0.so.1802.0 (glib2-2.22.3p1 not reachable) |library gobject-2.0.1802.0 not found | in /usr/local/lib: libgobject-2.0.so.1802.0 (glib2-2.22.3p1 not reachable) |library gthread-2.0.1802.0 not found | in /usr/local/lib: libgthread-2.0.so.1802.0 (glib2-2.22.3p1 not reachable) Direct dependencies for xulrunner-1.8.1.19p4-xulrunner-1.8.1.19p4 resolve to: gtk+2-2.18.5 libiconv-1.13 gettext-0.17p0 nss-3.12.3.1p2 nspr-4.8 Full dependency tree is gtk+2-2.18.5 sqlite3-3.6.16.1 libiconv-1.13 gettext-0.17p0 nss-3.12.3.1p2 nspr-4.8 Warning: couldn't read packing-list from installed package gtk+2-2.18.3 File /var/db/pkg/gtk+2-2.18.3/+CONTENTS does not exist Can't install yelp-2.28.1p1 because of libraries |library gdk-x11-2.0.1402.0 not found | in /usr/local/lib: libgdk-x11-2.0.so.1402.0 (gtk+2-2.18.5 not reachable) |library gdk_pixbuf-2.0.1402.0 not found | in /usr/local/lib: libgdk_pixbuf-2.0.so.1402.0 (gtk+2-2.18.5 not reachable) |library gtk-x11-2.0.1402.0 not found | in /usr/local/lib: libgtk-x11-2.0.so.1402.0 (gtk+2-2.18.5 not reachable) Direct dependencies for yelp-2.28.1p0-yelp-2.28.1p1 resolve to: gconf2-2.28.0p0 libiconv-1.13 shared-mime-info-0.70p0 docbook-dsssl-1.72 gnome-user-docs-2.28.2 gnome-doc-utils-0.18.1 startup-notification-0.10 rarian-0.8.1p7 gettext-0.17p0 libxslt-1.1.26 xulrunner-1.8.1.19p4 Full dependency tree is jpeg-7 gtk+2-2.18.3 gconf2-2.28.0p0 libgpg-error-1.7 libexecinfo-1.1p2 python-2.5.4p2 shared-mime-info-0.70p0 glib2-2.22.2p2 atk-1.28.0 gnome-user-docs-2.28.2 startup-notification-0.10 bzip2-1.0.5 ORBit2-2.14.17p0 libIDL-0.8.13 libiconv-1.13 png-1.2.41 pango-1.24.5p0 sqlite3-3.6.16.1 gettext-0.17p0 nss-3.12.3.1p2 xulrunner-1.8.1.19p4 libxml-2.7.6 dbus-1.2.16 dbus-glib-0.80p1v0 nspr-4.8 py-libxml-2.7.6 bash-4.0.35 docbook-dsssl-1.72 glib2-2.22.3p1 cairo-1.8.8p0 libgcrypt-1.4.4p0 .libs-png-1.2.40 glitz-0.5.6p2 iso8879-1986 docbook-4.4 gnome-doc-utils-0.18.1 pcre-7.9 libxslt-1.1.26 rarian-0.8.1p7 Can't install zenity-2.28.0 because of libraries Direct dependencies for zenity-2.28.0-zenity-2.28.0 resolve to: yelp-2.28.1p0 libiconv-1.13
Re: cannot update packages after upgrade on 4.6 current as of january 12
On Sun, Jan 24, 2010 at 4:01 AM, Matthias Kilian k...@outback.escape.de wrote: On Sun, Jan 24, 2010 at 03:25:40AM -0600, Donald Cooley wrote: after upgrading current i tried to update all packages but update fails: [...] Can't locate OpenBSD/OldLibs.pm in @INC (@INC contains: Some files missed from the snapshot, this is probably one of them. That should be fixed in recent snapshots (january 20th). Ciao, Kili i upgraded to 20 january snapshot and all packages updated. among the output from the updates were: --- -dbus-1.2.16 --- Remember to update /etc/dbus-1/machine-id i ran dbus-uuid --ensure and there was no output. --- -libxml-2.7.6 --- Remember to update /var/db/xmlcatalog cannot find how to update xmlcatalog. read man page but i am not sure how to proceed. --- -openmotif-2.3.2p0 --- You should also check /usr/X11R6/lib/X11/config/Motif.rules (which was modified) You should also check /usr/X11R6/lib/X11/config/Motif.tmpl (which was modified) --- -polipo-1.0.4p0 --- You should also run rm -rf /var/polipo/* --- -privoxy-3.0.12 --- You should also run rm -rf /var/log/privoxy/* --- -rarian-0.8.1p7 --- You should also run rm -rf /usr/local/share/help/ You should also run rm -rf /var/db/rarian/ You should also run rm -rf /var/db/scrollkeeper/ are these indications of problems? don cooley
Unable to download bsd-jdk15-patches-9.tar to build jdk-1.5 on OpenBSD4.6-current as of 23 Nov. 2009
Hi, I am trying to build jdk 1.5 on OpenBSD. I have tried to download bsd-jdk15-patches-9.tar.bz2 from http://www.eyesbeyond.com/freebsddom/java/jdk15.html per the make instructions. The site reports a '500 error'. I have searched for the patch elsewhere on the Internet and I am unable to find it. I am hoping that someone can send me the patch bsd-jdk15-patches-9.tar.bz2 or tell me where else I can download it. Regards, Donald Cooley
Re: Unable to download bsd-jdk15-patches-9.tar to build jdk-1.5 on OpenBSD4.6-current as of 23 Nov. 2009
Thank you so much On Sun, Nov 29, 2009 at 2:18 AM, STeve Andre' and...@msu.edu wrote: Here you go... --STeve Andre' On Sunday 29 November 2009 03:01:01 Donald Cooley wrote: Hi, I am trying to build jdk 1.5 on OpenBSD. I have tried to download bsd-jdk15-patches-9.tar.bz2 from http://www.eyesbeyond.com/freebsddom/java/jdk15.html per the make instructions. The site reports a '500 error'. I have searched for the patch elsewhere on the Internet and I am unable to find it. I am hoping that someone can send me the patch bsd-jdk15-patches-9.tar.bz2 or tell me where else I can download it. Regards, Donald Cooley
