Hi,
I'm building a firewall with 6 ethernet interfaces. It's a Tyan S2425
mobo with 2 onboard NICs and added quad port Routerboard 44 card on a
1U PCI riser card.
The problem is that vr0 does not work. It's detected with MAC address
ff:ff:ff:ff:ff:ff and the PHY for vr0 is not detected.
vr1, vr2, vr3, as well as onboard fxp0 and fxp1 work just fine.
Any ideas what could be wrong here?
Here's the dmesg:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU - S 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 535261184 (522716K)
avail mem = 480309248 (469052K)
using 4256 buffers containing 26865664 bytes (26236K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/01/03, BIOS32 rev. 0 @
0xfdb80, SMBIOS rev. 2.3 @ 0xf06 40 (131 entries)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3b10/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1000 0xcd000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04:
aperture at 0xfc000000, size 0x200000 0
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci1 at ppb0 bus 1
ppb1 at pci1 dev 5 function 0 vendor "Hint", unknown product 0x0021 rev 0x15
pci2 at ppb1 bus 2
vr0 at pci2 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address ff:ff:ff:ff:ff:ff
vr1 at pci2 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:0c:42:02:2b:43
ukphy0 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci2 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:0c:42:02:2b:44
ukphy1 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci2 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:0c:42:02:2b:45
ukphy2 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03, i82562: irq 11,
address 00:e0:81:29:da:16
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
fxp1 at pci1 dev 11 function 0 "Intel 8255x" rev 0x08, i82559: irq 5,
address 00:e0:81:29:da:17
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 wired to compatibilit y, channel 1 wired
to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 10: GPIO VLM TMS
gpio0 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f745 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
